Surface‐initiated ring‐opening polymerization of p‐dioxanone on Wang resin bead

Biodegradable poly(p‐dioxanone) (PPDO) was formed on Wang resin surface by surface‐initiated ring‐opening polymerization (SI‐ROP). The SI‐ROP of p‐dioxanone (PDO) was achieved by heating a mixture of Tin(II) bis(2‐ethylhexanoate) [Sn(Oct)₂], hydroxyl functionalized Wang resin, and PDO in anhydrous toluene at 80 °C. The resultant polymer‐grafted Wang resin (Wang‐g‐PPDO) was characterized by fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), optical microscopy (OM), and field‐emission scanning electron microscopy (FE‐SEM). The FTIR spectra of Wang‐g‐PPDO show peak characteristic of PPDO at 2943 cm^?1 (? C? H stretch), at 1741 cm^?1 (? C?O stretch), and 1136 cm^?1 (C? O? C stretch) indicating the formation of ester linkage between PPDO and hydroxyl terminated Wang resin. The DSC thermogram show melting peak corresponding to PPDO polymer on Wang resin surface. Thermogravimetric investigation shows increase in PPDO content on the Wang resin surface in terms of percentage of weight loss with increase in reaction time. The OM and SEM photographs clearly show the formation of PPDO polymer on the Wang resin surface without altering the spherical nature of Wang resin bead. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1178–1184, 2008     

Study of reorientational dynamics during real‐time crystallization of absorbable poly(p‐dioxanone) by dielectric relaxation spectroscopy

The real‐time crystallization of absorbable poly(p‐dioxanone) (PDS) was studied by dielectric relaxation spectroscopy. The dipole dynamic changes in the diminishing amorphous phase were investigated over a wide range of crystallization conditions. The location, shape, and magnitude of the α relaxation and the apparent activation energy were monitored and compared before and after the onset of crystallization. We observed no correlation between the degree of crystallinity and the location (hence, the most probable relaxation time, τ) of the α relaxation from just after the initiation up to the latest stages of the isothermal crystallization. However, an abrupt change in the intensity of the α process and the apparent activation energy allowed for the precise detection of the onset of crystallization. This was probably caused by a reorganization of dipole units occurring a few moments before the crystallization began. As crystallization proceeded, an asymmetric broadening of the α peak was observed that was directly influenced by the appearance of a new lower frequency process that originated in the highly confined amorphous portion located inside the spherulites. Finally, PDS crystallization kinetics determined from the changes of the relaxed permittivity with time are discussed and compared with calorimetric and optical microscopy data. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2436–2448, 2000     

Microwave‐assisted ring‐opening polymerization of p‐dioxanone

The ring‐opening polymerization (ROP) of p‐dioxanone (PDO) under microwave irradiation with triethylaluminum (AlEt₃) or tin powder as catalyst was investigated. When the ROP of PDO was catalyzed by AlEt₃, the viscosity‐average molecular weight (M_v) of poly(p‐dioxanone) (PPDO) reached 317,000 g mol^?1 only in 30 min, and the yield of PPDO achieved 96.0% at 80 °C. Tin powder was successfully used as catalyst for synthesizing PPDO by microwave heating, and PPDO with M_v of 106,000 g mol^?1 was obtained at 100 °C in 210 min. Microwave heating accelerated the ROP of PDO catalyzed by AlEt₃ or tin powder, compared with the conventional heating method. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3207–3213, 2008     

An efficient approach to synthesize polysaccharides‐graft‐poly(p‐dioxanone) copolymers as potential drug carriers

Starch and poly(p‐dioxanone) (PPDO) are the natural and synthetic biodegradable and biocompatible polymers, respectively. Their copolymers can find extensive applications in biomedical materials. However, it is very difficult to synthesize starch‐graft‐PPDO copolymers in common organic solvents with very good solubility. In this article, well‐defined polysaccharides‐graft‐poly(p‐dioxanone) (SA_n‐PPDO) copolymers were successfully synthesized via the ring‐opening polymerization of p‐dioxanone (PDO) with an acetylated starch (SA) initiator and a Sn(Oct)₂ catalyst in bulk. The copolymers were characterized via Fourier transform infrared spectroscopy, ¹H NMR, gel permeation chromatography, thermogravimetric analysis (TG), differential scanning calorimetry, and wide angle x‐ray diffraction. The in vitro degradation results showed that the introduction of SA segments into the backbone chains of the copolymers led to an enhancement of the degradation rate, and the degradation rate of SA_n‐PPDO increased with the increase of SA wt %. Microspheres with an average volume diameter of 20 μm, which will have potential applications in controlled release of drugs, were successfully prepared by using these new copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5344–5353, 2009     

X‐Ray and Electron Diffraction Study of Poly(p‐dioxanone)

Summary: Solution‐grown lamellar crystals of poly(p‐dioxanone) (PPDX) have been crystallized isothermally from butane‐1,4‐diol at 100 °C. The crystal structure of PPDX has been determined by interpretation of X‐ray fiber diagrams of PPDX fibers and electron diffraction diagrams of lozenge‐shaped chain‐folder lamellar crystals. The unit cell of PPDX is orthorhombic with space group P2₁2₁2₁ and parameters: a = 0.970 nm, b = 0.742 nm, and c (chain axis) = 0.682 nm. There are two chains per unit cell, which exist in an antiparallel arrangement.

Transmission electron micrograph of PPDX chain‐folded lamellar crystals obtained by isothermal crystallization and its electron diffraction diagram.     

Biodegradable poly(p‐dioxanone) reinforced and toughened by organo‐modified vermiculite

Poly(p‐dioxanone) (PPDO)/vermiculite (VMT) nanocomposites with exfoliated structure were prepared successfully by in situ intercalative polymerization of p‐dioxanone (PDO) in the presence of organo‐modified vermiculite (OVMT) with the aid of ultrasonic action. The nano‐structure of the nanocomposites was established using X‐ray diffraction (XRD) analysis and transmission electron microscopy (TEM) observations. The investigation of crystallization behavior by differential scanning calorimetry (DSC) and polarized optical microscopy (POM) proved that exfoliated OVMT platelets acted as a template for spherulite growth. The thermal stability of nanocomposites was enhanced than that of pure PPDO. Dynamic mechanical analysis (DMA) indicated nanoscale OVMT platelets restricted the motion of PPDO segments, which benefitted the increase of storage and loss modulus. The tensile properties showed that nanocomposites were reinforced and toughened significantly by the addition of nanoscale OVMT platelets. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and characterization of a novel biodegradable poly(p‐dioxanone)/montmorillonite nanocomposite

Poly(p‐dioxanone) (PPDO)/montmorillonite nanocomposites were prepared through the in situ ring‐opening polymerization of p‐dioxanone (PDO) and three types of montmorillonites (natural sodium montmorillonite, montmorillonite modified by octadecyltrimethyl ammonium chloride, and montmorillonite modified by hydroxyethylhexadecyldimethyl ammonium bromine) in the presence of triethylaluminum. Montmorillonite could accelerate the polymerization of PDO, and the viscosity‐average molecular weight of PPDO could reach 44,900 g/mol in 0.5 h. A nucleating effect of montmorillonite was observed, and the crystallization temperature of PPDO was increased by 18 °C. All three montmorillonites could improve the thermal stability of PPDO and increase the glass‐transition and melting temperatures of PPDO. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2298‐2303, 2005     

Bulk polymerization of p‐dioxanone using a cyclic tin alkoxide as initiator

Poly(p‐dioxanone) with an inherent viscosity of over 1 dL/g has been synthesized using the cyclic tin alkoxide 1‐di‐n‐butyl‐1‐stanna‐2,5‐dioxacyclopentane as initiator. Poly(p‐dioxanone) was synthesized in bulk and the results have been compared with polymerizations using tin (II) 2‐ethylhexanoate (Sn(Oct)₂) as catalyst. Sn(Oct)₂ has often been reported to be an effective catalyst for the synthesis of poly(p‐dioxanone), but here it is compared with an initiator which is less prone to catalyze transesterification reactions. The results demonstrate that the cyclic tin initiator is a promising alternative for the synthesis of poly(p‐dioxanone) with a high inherent viscosity. Poly(p‐dioxanone) is a polymer with mechanical properties and a degradation rate suitable for tissue engineering applications. Both the cyclic tin initiator and Sn(Oct)₂ gave, under some reaction conditions, inherent viscosities around 1 dL/g. The best polymer synthesized using the cyclic tin initiator had a strain‐at‐break of 515% and a stress‐at‐break of 43 MPa. The inherent viscosity of this polymer was 1.16 dL/g, while Sn(Oct)₂ resulted in a polymer with an inherent viscosity less than 0.4 dL/g under the same reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5552–5558, 2007     

Preparation and characterization of biodegradable poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone) copolymers

A series of poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone) copolymers were prepared with varying feed rations by using two step polymerization reactions. Poly(trimethylenecarbonate)(ε‐caprolactone) random copolymer was synthesized with stannous‐2‐ethylhexanoate and followed by adding p‐dioxanone monomer as the other block. The ring opening polymerization was carried out at high temperature and long reaction time to get high molecular weight polymers. The monofilament fibers were obtained using conventional melting spun methods. The copolymers were identified by ¹H and ¹³C NMR spectroscopy and gel permeation chromatography (GPC). The physicochemical properties, such as viscosity, molecular weight, melting point, glass transition temperature, and crystallinity, were studied. The hydrolytic degradation of copolymers was studied in a phosphate buffer solution, pH = 7.2, 37 °C, and a biological absorbable test was performed in rats. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2790–2799, 2005     

Well‐defined amphiphilic poly(p‐dioxanone)‐grafted poly(vinyl alcohol) copolymers: Synthesis and micellization

A series of amphiphilic biodegradable and biocompatible poly(p‐dioxanone)‐grafted poly(vinyl alcohol) (PVA) copolymers with well‐defined structure were obtained by a three‐step synthesis based on the “grafting from” concept. The first step (protection step), called the partial silylation of PVA hydroxyl groups, was accomplished by 1,1,1,3,3,3‐hexamethyldisilazane and catalyst chlorotrimethylsilane in dimethyl sulfoxide using THF as cosolvent. The second step was the ring‐opening polymerization of p‐dioxanone (PDO) initiated from the remaining OH groups of the partially silylated PVA. Finally, a deprotection step was followed: the silylether group was deprotected easily under very mild conditions. The synthetic conditions of the first two steps were investigated, and the structures of polymers formed in each step were characterized by various analytical methods. The results showed that the molecular structure of the PVA‐g‐PPDO could be controlled easily by the degree of silylation and the feed ratio. In addition, the micellization of amphiphilic PVA‐g‐PPDO copolymers in water was proved by fluorescence spectra and dynamic light scattering, and the relationship between structural parameters of copolymers and micellar properties was studied preliminarily. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,characterization, and thermal properties of a novel pentaerythritol‐initiated star‐shaped poly(p‐dioxanone)

A novel star‐shaped poly(p‐dioxanone) was synthesized by the ring‐opening polymerization of p‐dioxanone initiated by pentaerythritol with stannous octoate as a catalyst in bulk. The effect of the molar ratio of the monomer to the initiator on the polymerization was studied. The polymers were characterized with ¹H NMR and ¹³C NMR spectroscopy. The thermal properties of the polymers were investigated with differential scanning calorimetry and thermogravimetric analysis. The novel star‐shaped poly(p‐dioxanone) has a potential use in biomedical materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1245–1251, 2006     

Formation of Silica/Poly(p‐dioxanone) Microspheres by Surface‐Initiated Polymerization

A polymeric film of a biodegradable poly(p‐dioxanone) was grown from 490 nm silica particles by monolayer formation via self‐assembly of hydroxy‐terminated triethoxysilane and subsequent surface‐initiated ring‐opening polymerization of p‐dioxanone. The resulting silica/poly(p‐dioxanone) hybrid particles were characterized by means of ¹H NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, field‐emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy.

     

Microstructure analysis and thermal property of copolymers made of glycolide and ϵ‐caprolactone by stannous octoate

Glycolide (GL) and ?‐caprolactone (CL) were copolymerized in bulk at relatively high temperatures using stannous octoate as a catalyst. To investigate the relationship among microstructure, thermal properties, and crystallinity, three series of copolymers prepared at various reaction temperatures, times, and comonomer feed ratios were prepared and characterized by ¹H and ¹³C NMR, DSC, and wide‐angle X‐ray diffraction (WAXD). The 600‐MHz ¹H NMR spectra provided information about not only the copolymer compositions but also about the chain microstructure. The reactivity ratios (r_G and r_C) were calculated from the monomer sequences and were 6.84 and 0.13, respectively. In terms of overall feed compositions, the sequence lengths of the glycolyl units calculated from the reactivity ratios exceeded those measured from the polymeric products. Mechanistic considerations based on reactivity ratios, monomer consumption data, and average sequence lengths are discussed. The unusual phase diagram of GL/CL copolymers implies that the copolymer melting temperature does not depend on its composition alone but rather on the nature of the sequence distribution. The DSC and WAXD measurements show a close relationship between polymer crystallinity and the nature of the polymer sequence. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 544–554, 2002; DOI 10.1002/pola.10123     

Copolymerization of glycolide and trimethylene carbonate

The bulk ring‐opening copolymerization of glycolide with trimethylene carbonate was performed under different conditions. The influence of the composition, temperature, reaction time, and catalyst on the chain microstructure was studied by means of ¹H and ¹³C NMR spectroscopy. The final microstructure was found to be highly dependent on the transesterification reactions. The thermal behavior was sensitive to the composition and to the length of the glycolyl microblocks. Differential scanning calorimetry and X‐ray diffraction demonstrated that glycolyl‐rich sequences could give rise to a single crystalline phase, whereas trimethylene carbonyl units were incorporated into the amorphous phase. The synthesis of copolymers from the melt‐state transesterification of polyglycolide and poly(trimethylene carbonate) homopolymer mixtures was also studied. The hydrolytic degradation rate of the copolymers was found to depend on the microstructure and in general was enhanced with the degree of randomness. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 993–1013, 2006     

Synthesis of biodegradable copolymers with low‐toxicity zirconium compounds. III. Synthesis and chain‐microstructure analysis of terpolymer obtained from L‐lactide,glycolide, and ϵ‐caprolactone initiated by zirconium(IV) acetylacetonate

Zirconium(IV) acetylacetonate [Zr(acac)₄] is a very good initiator for the terpolymerization of glycolide with L‐lactide and ?‐caprolactone. The microstructure of the obtained terpolymer was determined by NMR spectroscopy and then compared with terpolymers obtained in the presence of stanous(II) octoate [Sn(oct)₂]. Samples obtained with Zr(acac)₄ were characterized by a segmental‐chain microstructure. Apart from relatively long lactidyl microblocks, there were also segments made of random copolymer of glycolide with lactide. Such a structure is formed as a result of strong transesterification caused by active caproyl chain endings attacking the glycolidyl groups. Domination of this type of transestrification is shown. The growth of terpolymer chains and the influence of transesterification on gradual changes of the microstructure of the forming terpolymer chain were examined. Significant differences among glycolide, lactide, and the least reactive caprolactone were observed. The results of differential scanning calorimetric examinations of the obtained terpolymers are presented. Differences between the structures of random terpolymers obtained during terpolymerization initiated by Sn(oct)₂ and those obtained by Zr(acac)₄ influence their thermal properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3129–3143, 2002     

Synthesis of biodegradable copolymers with low‐toxicity zirconium compounds. IV. Copolymerization of glycolide with trimethylene carbonate and 2,2‐dimethyltrimethylene carbonate: Microstructure analysis of copolymer chains by high‐resolution nuclear magnetic resonance spectroscopy

The results of the copolymerization of glycolide with cyclic trimethylene carbonate and 2,2‐dimethyltrimethylene carbonate are described. The copolymerization was conducted in the presence of low‐toxicity zirconium(IV) acetylacetonate as an initiator. With this kind of initiator, the composition of the comonomer units in the copolymer chains was assumed to be obtained with high efficiency. Despite significant differences in the comonomer reactivity, in copolymers containing comparable amounts of glycolidyl and carbonate sequences, highly randomized chain structures were observed. This effect resulted from strong intermolecular transesterification that proceeded during the studied copolymerization and caused glycolidyl microblock randomization. The assignment of the spectral NMR lines to appropriate comonomer sequences of polymeric chains was performed in the region of methylene protons of glycolidyl units in ¹H NMR spectra of the copolymers and in the carbonyl region of carbon spectra. The equations were formulated for a detailed characterization of the obtained copolymer chains, the average lengths of the blocks, and the transesterification and randomization coefficients. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 98–114, 2006     

Biocompatibility evaluation of self‐assembled micelles prepared from poly(lactide‐co‐glycolide)‐poly(ethylene glycol) diblock copolymers

In this work, a series of PLGA‐PEG diblock copolymers were synthesized by ring‐opening polymerization of L‐lactide and glycolide using mPEG as macroinitiator and stannous octoate as catalyst. Spherical micelles were obtained from the various copolymers by using co‐solvent evaporation method. The biocompatibility of micelles was evaluated with the aim of assessing their potential in the development of drug delivery systems. Various aspects of biocompatibility were considered, including MTT assay, agar diffusion test, release of cytokines, hemolytic test, dynamic clotting time, protein adsorption in vitro, and zebrafish embryonic compatibility in vivo. The combined results revealed that the micelles present good cytocompatibility and hemocompatibility in vitro. Moreover, the cumulative effects of micelles throughout embryos developing stages have no toxicity in vivo. It is thus concluded that micelles prepared from PLGA‐PEG copolymers present good biocompatibility as potential drug carrier.     

Nanofibrosis of uncrystallizable poly(lactide‐co‐glycolide) via phase separation

Poly(lactide‐co‐glycolide) (PLGA) copolymers are a kind of biocompatible and biodegradable materials being widely used in tissue engineering. However, phase separation had not been reported successfully in fabricating these amorphous polymers into nanofibrous matrix, although this technique had shown advantages over electrospinning in producing a nanofiber network. In this study, tetrahydrofuran (THF)/H₂O solvent pairs were found suitable solvents to induce the formation of uniform PLGA gel at selected gelation temperatures. The results indicated that fine nanofibrous structures with fiber diameter around 40–60 nm could be obtained following the steps of gel formation, solvent extraction, and freeze‐drying, by controlling the concentration of PLGA/THF/H₂O solution, THF/H₂O ratio, and gelation temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of biodegradable copolymers with low‐toxicity zirconium compounds. II. Copolymerization of glycolide with ϵ‐caprolactone initiated by zirconium(IV) acetylacetonate and zirconium(IV) chloride

The aim of this article is to show a new method of copolymerizing glycolide and caprolactone with the low‐toxicity zirconium(IV) acetylacetonate and zirconium(IV) chloride as initiators. Such initiators enabled us to obtain copolymers with very good efficiency and good mechanical properties. The reactivity of the initiators was defined, and the chain‐propagation process was examined. On the basis of an NMR examination and differential scanning calorimetry thermograms, we found that the samples obtained at 100 °C with the initiators were characterized by a segmental chain microstructure, which provided good mechanical properties. When the synthesis was carried out at 150 °C, a more randomized structure was obtained, which caused crucial changes in the properties of the copolymers and decreases in the mechanical properties. Because of their properties, the obtained copolymers could be successfully applied as degradable surgical implants or drug carriers. The results show that the copolymers obtained with zirconium(IV) acetylacetonate and chloride could successfully replace ones obtained in the presence of tin compounds as far as medical applications are concerned. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1379–1394, 2002     

Spherulitic growth rates and morphology of absorbable poly(p‐dioxanone) homopolymer and its copolymer by hot‐stage optical microscopy

Hot‐stage optical microscopy was used to study the crystal morphology, nucleation, and spherulitic growth rates of poly(p‐dioxanone) (PDS) homopolymer and an 89/11 PDS/glycolide segmented block copolymer. A wide range of crystallization conditions were experimentally accessible, allowing the inspection of various morphological features and accurate estimations of characteristic growth parameters, including radial growth and nucleation rates. Although the regime analysis of the crystallization kinetics indicated no breaks in the growth rate curve, the isothermal data were in excellent agreement with the Hoffman–Lauritzen theory. Spherulitic growth rates obtained from optical measurements are compared with values of the half‐time of crystallization determined earlier by differential scanning calorimetry. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 3073–3089, 2001