BiZrO_(x)/ZSM-5催化合成气直接芳构化的研究北大核心CSCD

使用超临界法制备纳米BiZrO_(x)金属氧化物与ZSM-5分子筛复合得到双功能催化剂用于合成气直接芳构化,研究了Bi/Zr比对BiZrO_(x)金属氧化物、BiZrO_(x)/ZSM-5双功能催化剂催化CO加氢反应性能的影响.结果表明,少量Bi掺杂在ZrO_(2)中显著促进了金属氧化物催化剂对H_(2)的吸附和解离,有利于合成气活化,同时有助于BiZrO_(x)金属氧化物表面获得高浓度和相对缺电子性的氧空位,提高了催化剂催化活性.合成气转化过程中,合成气转化能力与氧空位浓度呈正相关,Bi掺杂提高了CO的转化率和产物中芳烃的选择性.     

Green,Multi‐Gram One‐Step Synthesis of Core–Shell Nanocomposites in Water and Their Catalytic Application to Chemoselective Hydrogenations

We devise a new and green route for the multi‐gram synthesis of core–shell nanoparticles (NPs) in one step under organic‐free and pH‐neutral conditions. Simply mixing core and shell metal precursors in the presence of solid metal oxides in water allowed for the facile fabrication of small CeO₂‐covered Au and Ag nanoparticles dispersed on metal oxides in one step. The CeO₂‐covered Au nanoparticles acted as a highly efficient and reusable catalyst for a series of chemoselective hydrogenations, while retaining C=C bonds in diverse substrates. Consequently, higher environmental compatibility and more efficient energy savings were achieved across the entire process, including catalyst preparation, reaction, separation, and reuse.     

Bifunctional Electrocatalysts for Overall Water Splitting from an Iron/Nickel‐Based Bimetallic Metal–Organic Framework/Dicyandiamide Composite

Pyrolysis of a bimetallic metal–organic framework (MIL‐88‐Fe/Ni)‐dicyandiamide composite yield a Fe and Ni containing carbonaceous material, which is an efficient bifunctional electrocatalyst for overall water splitting. FeNi₃ and NiFe₂O₄ are found as metallic and metal oxide compounds closely embedded in an N‐doped carbon–carbon nanotube matrix. This hybrid catalyst (Fe‐Ni@NC‐CNTs) significantly promotes the charge transfer efficiency and restrains the corrosion of the metallic catalysts, which is shown in a high OER and HER activity with an overpotential of 274 and 202 mV, respectively at 10 mA cm^?2 in alkaline solution. When this bifunctional catalyst was further used for H₂ and O₂ production in an electrochemical water‐splitting unit, it can operate in ambient conditions with a competitive gas production rate of 1.15 and 0.57 μL s^?1 for hydrogen and oxygen, respectively, showing its potential for practical applications.     

Direct organocatalytic hydroalkoxylation of α,β-unsaturated ketones

The direct addition of a variety of alcohols to in situ activated olefins was observed in the presence of mild bifunctional amine/acid catalysts. Unlike existing methods, the reactions proceed at room temperature and in the absence of transition metals. The use of simple commercially available catalysts, amines and acids makes this an attractive method for the preparation of β-alkoxy ketones, which are prevalent targets and intermediates in organic synthesis.     

以MOFs为前驱体的多孔金属氧化物催化剂研究进展

多孔金属氧化物具有高比表面积、大孔径、特殊的形貌和结构特性,广泛应用于催化、锂离子电池、太阳能电池、气敏传感器等领域。金属有机骨架材料(MOFs)是一类具有周期性网络结构的新型多孔晶体材料,在气体存储、气体分离、催化等领域具有重要的应用价值。近年来,以MOFs为前驱体制备多孔碳和多孔金属氧化物成为MOFs应用领域一个新的研究热点。本文主要综述了以MOFs为前驱体制备的多孔金属氧化物和多孔金属氧化物/碳复合物在CO氧化、催化产氢、异丁烷脱氢、环已烯氧化、醇直接氧化为酯、醛氧化酰胺化反应、光催化降解有机物和氧还原反应等方面的应用。     

Type II Anion Relay Chemistry: Exploiting Bifunctional Weinreb Amide Linchpins for the One‐Pot Synthesis of Differentiated 1,3‐Diketones,Pyrans, and Spiroketals

The design, synthesis, and validation of new highly effective bifunctional linchpins for type II anion relay chemistry (ARC) has been achieved. The mechanistically novel negative‐charge migration that comprises the Brook rearrangement is now initiated by a stabilized tetrahedral intermediate, which is generated by nucleophilic addition to a Weinreb amide, rather than by a simple oxyanion that is generated from an epoxide. As a result, the linchpin preserves the carbonyl functionality in the ARC adducts, thus permitting access to functionally complex systems in a single flask without the need for further chemical manipulations. This tactic was validated with the one‐pot preparation of monoprotected 1,3‐diketones as well as pyran and spiroketal scaffolds, depending on the choice of nucleophile, electrophile, and work‐up conditions.     

Catalytic oxidation of organic substrates with hydrogen peroxide in two-phase systems in the presence of peroxo-polyoxotungstates containing organic ligands

The prospects of using bifunctional homogeneous metal-complex catalysts based on peroxo-polyoxotungstates with organic ligands (tertiary phosphine oxides) were exemplified by oxidation of benzyl alcohol and cyclooctene with hydrogen peroxide in two-phase systems (organic phase — liquid phase).     

Type II Anion Relay Chemistry: Exploiting Bifunctional Weinreb Amide Linchpins for the One‐Pot Synthesis of Differentiated 1,3‐Diketones,Pyrans, and Spiroketals

The design, synthesis, and validation of new highly effective bifunctional linchpins for type II anion relay chemistry (ARC) has been achieved. The mechanistically novel negative‐charge migration that comprises the Brook rearrangement is now initiated by a stabilized tetrahedral intermediate, which is generated by nucleophilic addition to a Weinreb amide, rather than by a simple oxyanion that is generated from an epoxide. As a result, the linchpin preserves the carbonyl functionality in the ARC adducts, thus permitting access to functionally complex systems in a single flask without the need for further chemical manipulations. This tactic was validated with the one‐pot preparation of monoprotected 1,3‐diketones as well as pyran and spiroketal scaffolds, depending on the choice of nucleophile, electrophile, and work‐up conditions.     

Liquid‐Phase Synthesis of 2′‐Methyl‐RNA on a Homostar Support through Organic‐Solvent Nanofiltration

Due to the discovery of RNAi, oligonucleotides (oligos) have re‐emerged as a major pharmaceutical target that may soon be required in ton quantities. However, it is questionable whether solid‐phase oligo synthesis (SPOS) methods can provide a scalable synthesis. Liquid‐phase oligo synthesis (LPOS) is intrinsically scalable and amenable to standard industrial batch synthesis techniques. However, most reported LPOS strategies rely upon at least one precipitation per chain extension cycle to separate the growing oligonucleotide from reaction debris. Precipitation can be difficult to develop and control on an industrial scale and, because many precipitations would be required to prepare a therapeutic oligonucleotide, we contend that this approach is not viable for large‐scale industrial preparation. We are developing an LPOS synthetic strategy for 2′‐methyl RNA phosphorothioate that is more amenable to standard batch production techniques, using organic solvent nanofiltration (OSN) as the critical scalable separation technology. We report the first LPOS‐OSN preparation of a 2′‐Me RNA phosphorothioate 9‐mer, using commercial phosphoramidite monomers, and monitoring all reactions by HPLC, ³¹P NMR spectroscopy and MS.     

Controlled Click‐Assembly of Well‐Defined Hetero‐Bifunctional Cubic Silsesquioxanes and Their Application in Targeted Bioimaging

A general procedure for the assembly of hetero‐bifunctional cubic silsesquioxanes with diverse functionality and a perfectly controlled distribution of functional groups on the inorganic framework has been developed. The method is based on a two‐step sequence of mono‐ and hepta‐functionalization through the ligand‐accelerated copper(I)‐catalyzed azide–alkyne cycloaddition of a readily available octaazido cubic silsesquioxane. The stoichiometry of the reactants and the law of binomial distribution essentially determine the selectivity of the key monofunctionalization reaction when a copper catalyst with strong donor ligands is used. The methodology has been applied to the preparation of a set of bifunctional nano‐building‐blocks with orthogonal reactivity for the controlled assembly of precisely defined hybrid nanomaterials and a fluorescent multivalent probe for application in targeted cell‐imaging. The inorganic cage provides an improved photostability to the covalently attached dye as well as a convenient framework for the 3D multivalent display of the pendant epitopes. Thus, fluorescent bioprobes based on well‐defined cubic silsesquioxanes offer interesting advantages over more conventional fully organic analogues and ill‐defined hybrid nanoparticles and promise to become powerful tools for the study of cell biology and for biomedical applications.     

Synthesis of multifunctional polymer containing Ni‐Pd NPs via thiol‐ene reaction for one‐pot cascade reactions

Recently, acid–base bifunctional catalysts have been considered due to their abilities, such as the simultaneous activation of electrophilic and nucleophilic species and their high importance in organic syntheses. However, the synthesis of acid–base catalysts is problematic due to the neutralization of acidic and basic groups. This work reports a facial approach to solve this problem via the synthesis of a novel bifunctional polymer using inexpensive materials and easy methods. In this way, at the first step, heterogeneous poly (styrene sulfonic acid‐n‐vinylimidazole) containing pentaerythritol tetra‐(3‐mercaptopropionate) (PETMP) and trimethylolpropane trimethacrylate (TMPTMA) cross‐linkers were synthesized in the pores of a mesoporous silica structure using click reaction as a novel bifunctional acid–base catalyst. After that, Ni‐Pd nanoparticles supported on poly (styrenesulfonic acid‐n‐vinylimidazole)/KIT‐6 as a novel trifunctional heterogeneous acid–base‐metal catalyst was prepared. The prepared catalysts were characterized by various techniques like FT‐IR, TGA, ICP‐AES, DRS‐UV, TEM, FE‐SEM, EDS‐Mapping, and XRD. The synthesized catalysts were efficiently used as bifunctional/trifunctional catalysts for one‐pot, deacetalization‐Knoevenagel condensation and one‐pot, three‐step and a sequential reaction containing deacetalization‐Knoevenagel condensation‐reduction reaction. It is important to note that the synthesized catalyst showing high chemo‐selectivity for the reduction of nitro group, alkenyl double bond and ester group in the presence of nitrile. Moreover, it was found that the different nanoparticles including Ni, Pd, and alloyed Ni‐Pd showing different chemo‐selectivity and catalytic activity in the reaction.     

Mineralization‐Inspired Synthesis of Magnetic Zeolitic Imidazole Framework Composites

Metal–organic frameworks (MOFs) capable of mobility and manipulation are attractive materials for potential applications in targeted drug delivery, catalysis, and small‐scale machines. One way of rendering MOFs navigable is incorporating magnetically responsive nanostructures, which usually involve at least two preparation steps: the growth of the magnetic nanomaterial and its incorporation during the synthesis of the MOF crystals. Now, by using optimal combinations of salts and ligands, zeolitic imidazolate framework composite structures with ferrimagnetic behavior can be readily obtained via a one‐step synthetic procedure, that is, without the incorporation of extrinsic magnetic components. The ferrimagnetism of the composite originates from binary oxides of iron and transition metals such as cobalt. This approach exhibits similarities to the natural mineralization of iron oxide species, as is observed in ores and in biomineralization.     

Aqua-organocatalyzed direct asymmetric aldol reaction with acyclic amino acids and organic bases with control of diastereo- and enantioselectivity

An effective aqua-organocatalytic direct aldol reaction is described. Aromatic amino acids can be a bifunctional catalyst system, which demonstrate excellent reactivity, diastereoselectivity, and enantioselectivity (up to 96% ee) in water without the addition of organic solvents. Furthermore, the present study demonstrates that both diastereo- and enantioselectivity can be easily modulated by the appropriate combination of an organocatalyst together with an organic base as a co-catalyst.     

一种合成3,5-二取代异噁唑的新方法

研究了端基炔烃和醛肟在间氯过氧苯甲酸和催化量碘苯作用下的[3+2]环合反应, 结果表明, 该过程经过一个有机高价碘中间体而进行. 通过该反应, 端基炔烃在氧化剂间氯过氧苯甲酸和催化剂碘苯的作用下与醛肟反应, 常温下可得到产率良好并具有区域选择性的3,5-二取代异噁唑化合物. 本文考察了反应条件的影响, 提出了可能的反应机理, 为简便快速合成3,5-二取代异噁唑化合物提供了一种新方法.     

CuCoMn-zeolite双功能催化剂转化生物质基合成气制取液态烃

选用四种不同的分子筛（SAPO-34, ZSM-5, Y, MCM-41）与CuCoMn（高醇合成组元）构成双功能催化剂,利用N2吸脱附、H2-TPR、XRD、NH3-TPD等表征了催化剂的结构性质. 研究了催化剂在生物质基合成气一段法制取液态烃燃料的应用. 相比于CuCoMn催化剂,加入分子筛的双功能催化剂均不同程度地提高了液体烃燃料的选择性及收率,且收率按顺序递减呈CCM-ZSM-5〉CCM-SAPO-34〉CCM-Y〉CCM-MCM-41. 同时,共沉淀法制备的CuCoMn-ZSM-5 （20wt%, Si/Al=100） 具有最佳的CO转化率（76%）及液体产物收率（30%）. 相比于CuCoMn氧化物,双功能催化剂的比表面及孔容均得到提高. CCM-ZSM-5具有适中的微孔尺寸和中等强度的酸性,增加CCM-ZSM-5中ZSM-5含量或降低ZSM-5中的Si/Al比,均有利于提高酸性位的数量,主要是较弱的酸性位. 而共沉淀法制备的CCM-ZSM-5具有更好的金属分散性及还原性能.     

Direct Transformation of Esters into Arenes with 1,5‐Bifunctional Organomagnesium Reagents

A direct transformation of carboxylic acid esters into arenes with 1,5‐bifunctional organomagnesium reagents is described. This efficient and practical method enables the one‐step defunctionalization of various carboxylic acid esters to prepare benzene, anthracene, tetracene, and pentacene derivatives. A double nucleophilic addition of the 1,5‐organodimagnesium reagent to the ester is followed by an immediate 1,4‐elimination reaction that leads to the direct [5+1] formation of a new aromatic ring.     

有机物单层分散在相关材料制备中的应用

与无机氧化物和盐类在载体表面自发单层分散相类似, 许多有机物也可以在载体表面自发单层分散.有机物在载体表面单层分散行为和分散后的存在状态与有机物分子形状和结构特点及载体表面性质和孔结构有关. 利用有机物在载体表面的单层分散, 可以设计制备具有优异性能的材料. 本文简要综述了近年来这方面研究工作取得的相关进展, 主要介绍了有机物单层分散在碳/氧化物复合物、氧化物和薄壁中孔碳材料的制备和织构调控方面的一些应用实例. 单层分散的有机物热分解后可在载体表面形成均匀的薄碳层, 以无机多孔氧化物为载体可制备出包覆均匀碳薄层的碳/氧化物复合物, 这种碳/氧化物复合物在染料吸附、催化剂载体和光催化方面显现出好的性能. 以溶胶-凝胶法制备氧化物时, 分散的有机物可以隔离溶胶颗粒, 从而制备出高比表面积的氧化物并可对孔容进行调控, 以此方法制备的γ-氧化铝比表面积可达506 m²·g^-1. 在惰性气氛中加热上述碳/氧化物复合物, 碳层可抑制氧化物的相变; 而在氧气中, 碳层燃烧发热会促进相变, 由此可快速制备超细α-氧化铝. 包覆均匀碳薄层的氧化物载体对碳起支撑作用, 在将氧化物溶解去除后, 可便捷制得高比表面积、大孔容、高中孔率的薄壁中孔碳材料, 碳材料的形貌、孔径分布等可通过选用不同织构的氧化物载体进行调控.     

Amine‐Urea‐Mediated Asymmetric Cycloadditions between Nitrile Oxides and o‐Hydroxystyrenes by Dual Activation

The first example of asymmetric 1,3‐dipolar cycloadditions between nitrile oxides and o ‐hydroxystyrenes, mediated by cinchona‐alkaloid‐based amine‐ureas is reported. The method is based on a dual activation involving both LUMO and HOMO activations. In addition to the stoichiometric asymmetric induction, a catalytic amount of amine‐urea enables the cycloadditions to proceed in an enantioselective manner. Computational studies strongly support the HOMO activation of o ‐hydroxystyrenes and LUMO activation of nitrile oxides by hydrogen‐bonding interactions with the Brønsted acid/base bifunctional catalyst.     

Single‐Crystal‐like Nanoporous Spinel Oxides: A Strategy for Synthesis of Nanoporous Metal Oxides Utilizing Metal‐Cyanide Hybrid Coordination Polymers

Development of a new method to synthesize nanoporous metal oxides with highly crystallized frameworks is of great interest because of their wide use in practical applications. Here we demonstrate a thermal decomposition of metal‐cyanide hybrid coordination polymers (CPs) to prepare nanoporous metal oxides. During the thermal treatment, the organic units (carbon and nitrogen) are completely removed, and only metal contents are retained to prepare nanoporous metal oxides. The original nanocube shapes are well‐retained even after the thermal treatment. When both Fe and Co atoms are contained in the precursors, nanoporous Fe?Co oxide with a highly oriented crystalline framework is obtained. On the other hand, when nanoporous Co oxide and Fe oxide are obtained from Co‐ and Fe‐contacting precursors, their frameworks are amorphous and/or poorly crystallized. Single‐crystal‐like nanoporous Fe?Co oxide shows a stable magnetic property at room temperature compared to poly‐crystalline metal oxides. We further extend this concept to prepare nanoporous metal oxides with hollow interiors. Core‐shell heterostructures consisting of different metal‐cyanide hybrid CPs are prepared first. Then the cores are dissolved by chemical etching using a hydrochloric acid solution (i.e., the cores are used as sacrificial templates), leading to the formation of hollow interiors in the nanocubes. These hollow nanocubes are also successfully converted to nanoporous metal oxides with hollow interiors by thermal treatment. The present approach is entirely different from the surfactant‐templating approaches that traditionally have been utilized for the preparation of mesoporous metal oxides. We believe the present work proves a new way to synthesize nanoporous metal oxides with controlled crystalline frameworks and architectures.     

Highly Carboxylic‐Acid‐Functionalized Ethane‐Bridged Periodic Mesoporous Organosilicas: Synthesis,Characterization, and Adsorption Properties

Functionalization of periodic mesoporous organosilicas (PMOs) with high loadings of pendant organic groups to form bifunctional PMOs with ordered mesostructures remains a challenging objective. Herein, we report that well‐ordered ethane‐bridged PMOs functionalized with exceptionally high loadings of pendant carboxylic acid groups (up to 80 mol % based on silica) were synthesized by the co‐condensation of 1,4‐bis(trimethoxysilyl)ethane (BTME) and carboxyethylsilanetriol sodium salt (CES) with Pluronic P123 as the template and KCl as an additive under acidic conditions. The bifunctional materials were characterized by using a variety of techniques, including powder X‐ray diffraction, nitrogen‐adsorption/desorption, TEM, and solid‐state ¹³C and ²⁹Si NMR spectroscopy. Zeta‐potential measurements showed that the surface negative charges increased with increasing the CES content. This property makes them potential candidates for applications in drug adsorption. The excellent adsorption capacity of these bifunctional PMOs towards an anticancer drug (doxorubicin) was also demonstrated.