Quantifying Protein-Ligand Binding Constants using Electrospray Ionization Mass Spectrometry: A Systematic Binding Affinity Study of a Series of Hydrophobically Modified Trypsin Inhibitors

NanoESI-MS is used for determining binding strengths of trypsin in complex with two different series of five congeneric inhibitors, whose binding affinity in solution depends on the size of the P3 substituent. The ligands of the first series contain a 4-amidinobenzylamide as P1 residue, and form a tight complex with trypsin. The inhibitors of the second series have a 2-aminomethyl-5-chloro-benzylamide as P1 group, and represent a model system for weak binders. The five different inhibitors of each group are based on the same scaffold and differ only in the length of the hydrophobic side chain of their P3 residue, which modulates the interactions in the S3/4 binding pocket of trypsin. The dissociation constants (K_D) for high affinity ligands investigated by nanoESI-MS ranges from 15?nM to 450?nM and decreases with larger hydrophobic P3 side chains. Collision-induced dissociation (CID) experiments of five trypsin and benzamidine-based complexes show a correlation between trends in K_D and gas-phase stability. For the second inhibitor series we could show that the effect of imidazole, a small stabilizing additive, can avoid the dissociation of the complex ions and as a result increases the relative abundance of weakly bound complexes. Here the K_D values ranging from 2.9 to 17.6???M, some 1?C2 orders of magnitude lower than the first series. For both ligand series, the dissociation constants (K_D) measured via nanoESI-MS were compared with kinetic inhibition constants (K_i) in solution.     

Negative thermal expansibility change for dissociation of lysozyme variant amyloid protofibril

A disulfide‐deficient variant of hen lysozyme, 0SS, is known to form an amyloid protofibril spontaneously, and to dissociate into monomers at high hydrostatic pressure. We carried out native PAGE at various temperatures (20–35°C) and pressures (0.1–200 MPa), to characterize the dissociation equilibrium of disulfide‐deficient variant of hen lysozyme amyloid protofibril. Based on the density profiles, the partial molar volume and thermal expansibility changes for dissociation, Δv_D and Δe_D, were obtained to be ?74 cm³/mol at 25°C and ?2.3 cm³ mol^?1 K^?1, respectively. The dissociation of amyloid fibril destroys the cross β‐structure, and such conformational destruction in native protein fold rarely accompanies negative thermal expansibility change. We discussed the negative thermal expansibility change in terms of hydration and structural packing of the amyloid protofibril.     

Interaction of PiB‐Derivative Metal Complexes with Beta‐Amyloid Peptides: Selective Recognition of the Aggregated Forms

Metal complexes are increasingly explored as imaging probes in amyloid peptide related pathologies. We report the first detailed study on the mechanism of interaction between a metal complex and both the monomer and the aggregated form of Aβ_1–40 peptide. We have studied lanthanide(III) chelates of two PiB‐derivative ligands (PiB=Pittsburgh compound B), L¹ and L², differing in the length of the spacer between the metal‐complexing DO3A macrocycle (DO3A= 1,4,7,10‐tetraazacyclododecane‐1,4,7‐triacetic acid) and the peptide‐recognition PiB moiety. Surface plasmon resonance (SPR) and saturation transfer difference (STD) NMR spectroscopy revealed that they both bind to aggregated Aβ_1–40 (K_D=67–160 μM ), primarily through the benzothiazole unit. HSQC NMR spectroscopy on the ¹⁵N‐labeled, monomer Aβ_1–40 peptide indicates nonsignificant interaction with monomeric Aβ. Time‐dependent circular dichroism (CD), dynamic light scattering (DLS), and TEM investigations of the secondary structure and of the aggregation of Aβ_1–40 in the presence of increasing amounts of the metal complexes provide coherent data showing that, despite their structural similarity, the two complexes affect Aβ fibril formation distinctly. Whereas GdL¹, at higher concentrations, stabilizes β‐sheets, GdL² prevents aggregation by promoting α‐helical structures. These results give insight into the behavior of amyloid‐targeted metal complexes in general and contribute to a more rational design of metal‐based diagnostic and therapeutic agents for amyloid‐ associated pathologies.     

Stereospecific control of peptide gas‐phase ion chemistry with cis and trans cyclo ornithine residues

We report non‐chiral amino acid residues cis‐ and trans‐1,4‐diaminocyclohexane‐1‐carboxylic acid (cyclo‐ornithine, cO) that exhibit unprecedented stereospecific control of backbone dissociations of singly charged peptide cations and hydrogen‐rich cation radicals produced by electron‐transfer dissociation. Upon collision‐induced dissociation (CID) in the slow heating regime, peptide cations containing trans‐cO residues undergo facile backbone cleavages of amide bonds C‐terminal to trans‐cO. By contrast, peptides with cis‐cO residues undergo dissociations at several amide bonds along the peptide ion backbone. Diastereoisomeric cO‐containing peptides thus provide remarkably distinct tandem mass spectra. The stereospecific effect in CID of the trans‐cO residue is explained by syn‐facially directed proton transfer from the 4‐ammonium group at cO to the C‐terminal amide followed by neighboring group participation in the cleavage of the CO―NH bond, analogous to the aspartic acid and ornithine effects. Backbone dissociations of diastereoisomeric cO‐containing peptide ions generate distinct [b_n]⁺‐type fragment ions that were characterized by CID‐MS³ spectra. Stereospecific control is also reported for electron‐transfer dissociation of cis‐ and trans‐cO containing doubly charged peptide ions. The stereospecific effect upon electron transfer is related to the different conformations of doubly charged peptide ions that affect the electron attachment sites and ensuing N―C_α bond dissociations.     

Covalent and non‐covalent binding in the ion/ion charge inversion of peptide cations with benzene‐disulfonic acid anions

Protonated angiotensin II and protonated leucine enkephalin‐based peptides, which included YGGFL, YGGFLF, YGGFLH, YGGFLK and YGGFLR, were subjected to ion/ion reactions with the doubly deprotonated reagents 4‐formyl‐1,3‐benzenedisulfonic acid (FBDSA) and 1,3‐benzenedisulfonic acid (BDSA). The major product of the ion/ion reaction is a negatively charged complex of the peptide and reagent. Following dehydration of [M + FBDSA‐H]^? via collisional‐induced dissociation (CID), angiotensin II (DRVYIHPF) showed evidence for two product populations, one in which a covalent modification has taken place and one in which an electrostatic modification has occurred (i.e. no covalent bond formation). A series of studies with model systems confirmed that strong non‐covalent binding of the FBDSA reagent can occur with subsequent ion trap CID resulting in dehydration unrelated to the adduct. Ion trap CID of the dehydration product can result in cleavage of amide bonds in competition with loss of the FBDSA adduct. This scenario is most likely for electrostatically bound complexes in which the peptide contains both an arginine residue and one or more carboxyl groups. Otherwise, loss of the reagent species from the complex, either as an anion or as a neutral species, is the dominant process for electrostatically bound complexes. The results reported here shed new light on the nature of non‐covalent interactions in gas phase complexes of peptide ions that can be used in the rationale design of reagent ions for specific ion/ion reaction applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Observation of an unusually facile fragmentation pathway of gas-phase peptide ions: a study on the gas-phase fragmentation mechanism and energetics of tryptic peptides modified with 4-sulfophenyl isothiocyanate (SPITC) and 4-chlorosulfophenyl isocyanate (SPC) and their 18-crown-6 complexes

Various peptide modifications have been explored recently to facilitate the acquisition of sequence information. N-terminal sulfonation is an interesting modification because it allows unambiguous de novo sequencing of peptides, especially in conjunction with MALDI-PSD-TOF analysis; such modified peptide ions undergo fragmentation at energies lower than those required conventionally for unmodified peptide ions. In this study, we systematically investigated the fragmentation mechanisms of N-terminal sulfonated peptide ions prepared using two different N-terminal sulfonation reagents: 4-sulfophenyl isothiocyanate (SPITC) and 4-chlorosulfophenyl isocyanate (SPC). Collision-induced dissociation (CID) of the SPC-modified peptide ions produced a set of y-series ions that were more evenly distributed relative to those observed for the SPITC-modified peptides; y(n-1) ion peaks were consistently and significantly larger than the signals of the other y-ions. We experimentally investigated the differences between the dissociation energies of the SPITC- and SPC-modified peptide ions by comparing the MS/MS spectra of the complexes formed between the crown ether 18-crown-6 (CE) and the modified peptides. Upon CID, the complexes formed between 18-crown-6 ether and the protonated amino groups of C-terminal lysine residues underwent either peptide backbone fragmentation or complex dissociation. Although the crown ether complexes of the unmodified ([M + CE + 2H]2+) and SPC-modified ([M* + CE + 2H]2+) peptides underwent predominantly noncovalent complex dissociation upon CID, the low-energy dissociations of the crown ether complexes of the SPITC-modified peptides ([M' + CE + 2H]2+) unexpectedly resulted in peptide backbone fragmentations, along with a degree of complex dissociation. We performed quantum mechanical calculations to address the energetics of fragmentations observed for the modified peptides.     

Strategies for generating peptide radical cations via ion/ion reactions

Several approaches for the generation of peptide radical cations using ion/ion reactions coupled with either collision induced dissociation (CID) or ultraviolet photo dissociation (UVPD) are described here. Ion/ion reactions are used to generate electrostatic or covalent complexes comprised of a peptide and a radical reagent. The radical site of the reagent can be generated multiple ways. Reagents containing a carbon–iodine (C―I) bond are subjected to UVPD with 266‐nm photons, which selectively cleaves the C―I bond homolytically. Alternatively, reagents containing azo functionalities are collisionally activated to yield radical sites on either side of the azo group. Both of these methods generate an initial radical site on the reagent, which then abstracts a hydrogen from the peptide while the peptide and reagent are held together by either electrostatic interactions or a covalent linkage. These methods are demonstrated via ion/ion reactions between the model peptide RARARAA (doubly protonated) and various distonic anionic radical reagents. The radical site abstracts a hydrogen atom from the peptide, while the charge site abstracts a proton. The net result is the conversion of a doubly protonated peptide to a peptide radical cation. The peptide radical cations have been fragmented via CID and the resulting product ion mass spectra are compared to the control CID spectrum of the singly protonated, even‐electron species. This work is then extended to bradykinin, a more broadly studied peptide, for comparison with other radical peptide generation methods. The work presented here provides novel methods for generating peptide radical cations in the gas phase through ion/ion reaction complexes that do not require modification of the peptide in solution or generation of non‐covalent complexes in the electrospray process. Copyright © 2015 John Wiley & Sons, Ltd.     

Affinity Maturation of Macrocyclic Peptide Modulators of Lys48-Linked Diubiquitin by a Twofold Strategy

Messenger RNA display of peptides containing non-proteinogenic amino acids, referred to as RaPID system, has become one of the leading methods to express libraries consisting of more than trillion-members of macrocyclic peptides, which allows for discovering de novo bioactive ligands. Ideal macrocyclic peptides should have dissociation constants (K_D) as low as single-digit values in the nanomolar range towards a specific target of interest. Here, a twofold strategy to discover optimized macrocyclic peptides within this affinity regime is described. First, benzyl thioether cyclized peptide libraries were explored to identify tight binding hits. To obtain more insights into critical sequence information, sequence alignment was applied to guide rational mutagenesis for the improvement of their binding affinity. Using this twofold strategy, benzyl thioether macrocyclic peptide binders against Lys48-linked ubiquitin dimer (K48-Ub2) were successfully obtained that display K_D values in the range 0.3–1.2 nm , which indicate binding two orders of magnitude stronger than those of macrocyclic peptides recently reported. Most importantly, this macrocyclic peptide also showed an improved cellular inhibition of the K48-Ub2 recognition by deubiquitinating enzymes and the 26S proteasome, resulting in the promotion of apoptosis in cancer cells.     

Dissociation of disulfide‐intact somatostatin ions: the roles of ion type and dissociation method

The dissociation chemistry of somatostatin‐14 was examined using various tandem mass spectrometry techniques including low‐energy beam‐type and ion trap collision‐induced dissociation (CID) of protonated and deprotonated forms of the peptide, CID of peptide‐gold complexes, and electron transfer dissociation (ETD) of cations. Most of the sequence of somatostatin‐14 is present within a loop defined by the disulfide linkage between Cys‐3 and Cys‐14. The generation of readily interpretable sequence‐related ions from within the loop requires the cleavage of at least one of the bonds of the disulfide linkage and the cleavage of one polypeptide backbone bond. CID of the protonated forms of somatostatin did not appear to give rise to an appreciable degree of dissociation of the disulfide linkage. Sequential fragmentation via multiple alternative pathways tended to generate very complex spectra. CID of the anions proceeded through CH₂? S cleavages extensively but relatively few structurally diagnostic ions were generated. The incorporation of Au(I) into the molecule via ion/ion reactions followed by CID gave rise to many structurally relevant dissociation products, particularly for the [M+Au+H]²⁺ species. The products were generated by a combination of S? S bond cleavage and amide bond cleavage. ETD of the [M+3H]³⁺ ion generated rich sequence information, as did CID of the electron transfer products that did not fragment directly upon electron transfer. The electron transfer results suggest that both the S? S bond and an N? C_α bond can be cleaved following a single electron transfer reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Sequence information, distinction and quantitation of C-terminal leucine and isoleucine in ternary complexes of tripeptides with Cu(II) and 2,2'-bipyridine

Tripeptides form ternary complexes with Cu(2+) and 2,2'-bipyridine (bpy) that self-assemble upon mixing the components in aqueous methanol solution. Electrospray ionization (ESI) of the complex solutions provides abundant singly charged [Cu(peptide -- H)bpy](+) and doubly charged [Cu(peptide)bpy](2+) ions. Collision-induced dissociation (CID) at low ion kinetic energies of several tripeptides, AGG, GGA, LGG, GGL, GGI, FGG, GGF, LGF, GLF, GFL, GYA and GAY, showed fragments that were indicative of the amino acid sequence in the peptide. In addition, CID of single and doubly charged complexes of isomeric tripeptides GGL and GGI provided unambiguous distinction of the isomeric leucine and isoleucine residues. Leucine peptides eliminated C(3)H(7) radicals from the amino acid side-chain whereas isoleucine eliminated C(2)H(5) radicals. CID of gas-phase doubly charged peptide complexes in a quadrupole ion trap produced a series of singly charged sequence fragments that following isolation and further CID furnished distinct fragments that allowed quantitation of leucine and isoleucine-containing peptides in mixtures.     

Silica Nanowires Templated by Amyloid‐like Fibrils

Many peptides self‐assemble to form amyloid fibrils. We previously explored the sequence propensity to form amyloid using variants of a designed peptide with sequence KFFEAAAKKFFE. These variant peptides form highly stable amyloid fibrils with varied lateral assembly and are ideal to template further assembly of non‐proteinaceous material. Herein, we show that the fibrils formed by peptide variants can be coated with a layer of silica to produce silica nanowires using tetraethyl‐orthosilicate. The resulting nanowires were characterized using electron microscopy (TEM), X‐ray fiber diffraction, FTIR and cross‐section EM to reveal a nanostructure with peptidic core. Lysine residues play a role in templating the formation of silica on the fibril surface and, using this library of peptides, we have explored the contributions of lysine as well as arginine to silica templating, and find that sequence plays an important role in determining the physical nature and structure of the resulting nanowires.     

Sequencing of peptide‐derived Amadori products by the electron capture dissociation method

The electron capture dissociation (ECD) of peptide‐derived Amadori products has been successfully applied for their sequencing. In contrast to the collision induced dissociation (CID), based on the vibrational excitation of peptides, the ECD method does not produce ions formed by fragmentation of the hexose moiety, that facilitates interpretation of the obtained spectra. The fragmentation spectrum is dominated by c_n and z·_n ions, providing the sufficient information for sequencing of peptides and establishing the location of glycated Lys residues in the peptide chain. The ECD experiments were conducted on a series of synthetic peptides and unseparated digests of glycated ubiquitin. Copyright © 2009 John Wiley & Sons, Ltd.     

Metastable Atom-Activated Dissociation Mass Spectrometry of Phosphorylated and Sulfonated Peptides in Negative Ion Mode

The dissociation behavior of phosphorylated and sulfonated peptide anions was explored using metastable atom-activated dissociation mass spectrometry (MAD-MS) and collision-induced dissociation (CID). A beam of high kinetic energy helium (He) metastable atoms was exposed to isolated phosphorylated and sulfonated peptides in the 3– and 2– charge states. Unlike CID, where phosphate losses are dominant, the major dissociation channels observed using MAD were C_α – C peptide backbone cleavages and neutral losses of CO₂, H₂O, and [CO₂ + H₂O] from the charge reduced (oxidized) product ion, consistent with an electron detachment dissociation (EDD) mechanism such as Penning ionization. Regardless of charge state or modification, MAD provides ample backbone cleavages with little modification loss, which allows for unambiguous PTM site determination. The relative abundance of certain fragment ions in MAD is also demonstrated to be somewhat sensitive to the number and location of deprotonation sites, with backbone cleavage somewhat favored adjacent to deprotonated sites like aspartic acid residues. MAD provides a complementary dissociation technique to CID, ECD, ETD, and EDD for peptide sequencing and modification identification. MAD offers the unique ability to analyze highly acidic peptides that contain few to no basic amino acids in either negative or positive ion mode.     

缓激肽多肽片段间非共价作用的质谱研究

以缓激肽(R¹P²P³G⁴F⁵S⁶P⁷F⁸R⁹)分子作为研究模型, 用电喷雾质谱研究缓激肽分子碎片片段之间的非共价相互作用, 探讨了影响气相多肽分子构象稳定的氢键作用. 合成了与缓激肽分子在位置1断裂形成的碎片一致的RPPGFS和PFR多肽序列, 与在位置2断裂形成碎片一致的RPPGF和SPFR多肽, 以及N端或者C端去掉精氨酸的相应碎片多肽. 实验结果表明, 上述两个断裂位置产生的碎片多肽分别进行反应后, 都能发生非共价作用. 在断裂方式1下, PFR多肽在去掉C端的精氨酸R后, 与其他大多数多肽不发生非共价结合, 表明PFR中的R在缓激肽气相分子的构象中发挥重要的作用. 而在断裂方式2下, 去掉N端或者C端精氨酸的多肽之间都存在非共价结合, 即C端带有丝氨酸的SPF或SPFR多肽碎片仍然可以与N端碎片发生氢键结合, 表明丝氨酸很可能处于转角的位置. 通过对碰撞诱导解离(CID)的碰撞能量分析, 发现多肽RPPGFS和PFR, 以及多肽RPPGF和SPFR之间氢键结合较强, 而同时去掉N端和C端精氨酸得到的多肽之间的氢键结合较弱. 质谱滴定法定量测得的RPPGFS和PFR的结合常数为3.53×10³, 与RPPGF和SPFR的结合常数(3.16×10³)相接近,它们均大于去除精氨酸的PPGF和SPF的结合常数(1.25×10³). 质谱滴定实验结果进一步确认了碰撞诱导解离的分析结果, 表明缓激肽分子两端的精氨酸之间的氢键作用是气相缓激肽分子构象稳定的重要因素之一.     

Template‐Assembled Synthetic G‐Quadruplex (TASQ): A Useful System for Investigating the Interactions of Ligands with Constrained Quadruplex Topologies

A new biomolecular device for investigating the interactions of ligands with constrained DNA quadruplex topologies, using surface plasmon resonance (SPR), is reported. Biomolecular systems containing an intermolecular‐like G‐quadruplex motif 1 (parallel G‐quadruplex conformation), an intramolecular G‐quadruplex 2 , and a duplex DNA 3 have been designed and developed. The method is based on the concept of template‐assembled synthetic G‐quadruplex (TASQ), whereby quadruplex DNA structures are assembled on a template that allows precise control of the parallel G‐quadruplex conformation. Various known G‐quadruplex ligands have been used to investigate the affinities of ligands for intermolecular 1 and intramolecular 2 DNA quadruplexes. As anticipated, ligands displaying a π‐stacking binding mode showed a higher binding affinity for intermolecular‐like G‐quadruplexes 1 , whereas ligands with other binding modes (groove and/or loop binding) showed no significant difference in their binding affinities for the two quadruplexes 1 or 2 . In addition, the present method has also provided information about the selectivity of ligands for G‐quadruplex DNA over the duplex DNA. A numerical parameter, termed the G‐quadruplex binding mode index (G4‐BMI), has been introduced to express the difference in the affinities of ligands for intermolecular G‐quadruplex 1 against intramolecular G‐quadruplex 2 . The G‐quadruplex binding mode index (G4‐BMI) of a ligand is defined as follows: G4‐BMI=K_D^intra/K_D^inter, where K_D^intra is the dissociation constant for intramolecular G‐quadruplex 2 and K_D^inter is the dissociation constant for intermolecular G‐quadruplex 1 . In summary, the present work has demonstrated that the use of parallel‐constrained quadruplex topology provides more precise information about the binding modes of ligands.     

Concentration-Dependent Interactions of Amphiphilic PiB Derivative Metal Complexes with Amyloid Peptides Aβ and Amylin**

Metal chelates targeted to amyloid peptides are widely explored as diagnostic tools or therapeutic agents. The attachment of a metal complex to amyloid recognition units typically leads to a decrease in peptide affinity. We show here that by separating a macrocyclic GdL chelate and a PiB targeting unit with a long hydrophobic C10 linker, it is possible to attain nanomolar affinities for both Aβ_1-40 (K_d=4.4 nm ) and amylin (K_d=4.5 nm ), implicated, respectively in Alzheimer's disease and diabetes. The Scatchard analysis of surface plasmon resonance data obtained for a series of amphiphilic, PiB derivative GdL complexes indicate that their Aβ_1-40 or amylin binding affinity varies with their concentration, thus micellar aggregation state. The GdL chelates also affect peptide aggregation kinetics, as probed by thioflavin-T fluorescence assays. A 2D NMR study allowed identifying that the hydrophilic region of Aβ_1-40 is involved in the interaction between the monomer peptide and the Gd³⁺ complex. Finally, ex vivo biodistribution experiments were conducted in healthy mice by using ¹¹¹In labeled analogues. Their pancreatic uptake, ∼3 %ID g⁻¹, is promising to envisage amylin imaging in diabetic animals.     

Organic Ligand Binding by a Hydrophobic Cavity in a Designed Tetrameric Coiled‐Coil Protein

The design and characterization of a hydrophobic cavity in de novo designed proteins provides a wide range of information about the functions of de novo proteins. We designed a de novo tetrameric coiled‐coil protein with a hydrophobic pocketlike cavity. Tetrameric coiled coils with hydrophobic cavities have previously been reported. By replacing one Leu residue at the a position with Ala, hydrophobic cavities that did not flatten out due to loose peptide chains were reliably created. To perform a detailed examination of the ligand‐binding characteristics of the cavities, we originally designed two other coiled‐coil proteins: AM2, with eight Ala substitutions at the adjacent a and d positions at the center of a bundled structure, and AM2W, with one Trp and seven Ala substitutions at the same positions. To increase the association of the helical peptides, each helical peptide was connected with flexible linkers, which resulted in a single peptide chain. These proteins exhibited CD spectra corresponding to superhelical structures, despite weakened hydrophobic packing. AM2W exhibited binding affinity for size‐complementary organic compounds. The dissociation constants, K_d, of AM2W were 220 nM for adamantane, 81 μM for 1‐adamantanol, and 294 μM for 1‐adamantaneacetic acid, as measured by fluorescence titration analyses. Although it was contrary to expectations, AM2 did not exhibit any binding affinity, probably due to structural defects around the designed hydrophobic cavity. Interestingly, AM2W exhibited incremental structure stability through ligand binding. Plugging of structural defects with organic ligands would be expected to facilitate protein folding.     

Formation of molecular radical cations of aliphatic tripeptides from their complexes with CuII(12-crown-4)

Molecular radical cations have proven to be difficult to generate from aliphatic peptides under electrospray ionization mass spectrometry (ESI-MS) conditions. For a family of small aliphatic peptides GGX, where X = G, A, P, I, L and V, these cations have been generated by electrospraying a mixture of Cu.2+, 12-crown-4 and GGX in methanol/water. GGX.+ is readily formed from the collision-induced dissociation (CID) of [CuII(12-crown-4)(GGX)].2+. The formation of these aliphatic peptide radical ions from these complexes, in cases where it is not possible from the corresponding complexes involving a series of amine ligands instead of 12-crown-4, is likely due to the second ionization energy of the [CuI(12-crown-4)(GGX)]+ complex being higher than that of the corresponding [CuI(amine)(GGX)]+ complex. Using these 12-crown-4 complexes, GGI can be differentiated from the isomeric GGL by comparing the CID spectra of their [a3 + H].+ ions.     

Equilibrium Studies of Binary and Mixed-Ligand Complexes of Zinc(II) Involving 2-(Aminomethyl)-Benzimidazole and Some Bio-Relevant Ligands

Binary and mixed-ligand complexes of zinc(II) involving 2-(aminomethyl)-benzimidazole (AMBI) and amino acids, peptides (HL) or DNA constituents have been investigated. Ternary complexes of amino acids or peptides are formed simultaneously. Amino acids form the complex Zn(AMBI)L, whereas amides form two complex species Zn(AMBI)L and Zn(AMBI)(LH_?1). The ternary complexes of zinc(II) with AMBI and DNA are formed in a stepwise process, whereby binding of zinc(II) to AMBI is followed by ligation of the DNA constituents. The stability of ternary complexes is quantitatively compared with their corresponding binary complexes in terms of the parameters ??log₁₀ K, log₁₀ ??_stat and log₁₀ X. The effect of the side chains of amino acid ligands (??_R) on complex formation is discussed. The values of ??log₁₀ K indicated that the ternary complexes containing aromatic amino acids are significantly more stable than the complexes containing alkyl- and hydroxyalkyl-substituted amino acids. This may be taken as evidence for a stacking interaction between the aromatic moiety of AMBI and the aromatic side chains of the bio-active ligands. The concentration distributions of various species formed in solution were also evaluated as a function of the pH.     

Characterization of a peptide family from the skin secretion of the Middle East Tree Frog Hyla savignyi by composition‐based de novo sequencing

A new tryptophyllin‐like peptide family was found in the skin secretion of the tree frog Hyla savignyi. Peptides were characterized by database‐independent sequencing strategies and specific ion fragmentation features were investigated. Skin secretions from specimens of Hyla savignyi were collected by mild electrical stimulation. Peptides were separated by reversed‐phase nano‐high‐performance liquid chromatography (nanoHPLC) and mass spectra were acquired online by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (FTICR‐MS). Peptides were characterized by manual de novo sequencing and by composition‐based sequencing (CBS), appearing mostly as C‐terminal free acids and as their acid amide analogs. Amide peptides yielded lower intensities of y‐type ions after collision‐induced dissociation (CID) than their acid analogs. A mechanism of internal b‐ion formation (positive ion mode) and of CO₂ elimination (negative ion mode) is proposed. We also exemplified phenomena such as the proline effect and formation of non‐direct sequence ions after sequence rearrangements. The occurrence of rearrangement products, of internal ions and of the proline effect made the CID spectra highly complex. CBS analysis nevertheless resulted in successful and highly reliable sequence analysis. Copyright © 2010 John Wiley & Sons, Ltd.