Dinuclear Manganese(II) Complexes with Bridging Selenidodiarsenate Anions [As2Se4]4−, [As2Se5]4− and [As2Se6]2−

Solvothermal reaction of [MnCl₂(amine)] (amine = terpy and tren) with elemental As and Se at a 1:1:2 molar ratio in H₂O/tren (10:1) affords the dimanganese(II) complexes [{Mn(terpy)}₂(μ‐As₂Se₄)] ( 1 ) and [{Mn(tren)}₂(μ‐As₂Se₅)] ( 2 ) respectively. The tetradentate [As₂Se₄]^4? bridging ligands in 1 contain a central As–As bond and exhibit approximately C_2h symmetry. Pairs of gauche sited Se atoms participate in five‐membered As₂Se₂Mn chelate rings. In contrast, two AsSe₃ pyramids share a common corner in the [As₂Se₅]^4? ligands of 2 and each coordinates an [Mn(tren)]²⁺ fragment through a single terminal Se atom. Such dinuclear complexes are linked into tetranuclear moieties through weak Se···Mn interactions of length 3.026(3) Å involving one of these terminal Se atoms. At a 1:3:6 molar ratio, solvothermal reaction of [MnCl₂(tren)] with As and Se leads to formation of a second dinuclear complex [{Mn(tren)}₂(μ‐As₂Se₆)₂] ( 3 ), which contains two bridging bidentate [As₂Se₆]^2? ligands. These are cyclic with an As₂Se₄ ring and can be regarded as being derived from [As₂Se₅]^4? anions by formation of two Se‐Se bonds to an additional Se atom.     

(Terpyridine)manganese(II) Coordination Polymers with Thio‐ and Selenidoarsenate(III) Ligands: Coligand Influence on the Chalcogenidoarsenate(III) Species and Coordination Mode

Hydrothermal reaction of [MnCl₂(terpy)] with elemental As and Se at 150 °C in 1:2:4 and 1:4:8 molar ratios in the presence of Cs₂CO₃ affords the complexes [{Mn(terpy)}₂ (As₂Se₅)]₂ ( 1 ) and [{Mn(terpy)}₂ (As₄Se₈)] ( 2 ), respectively. 1 contains dipyramidal [As₂Se₅]^4? ligands that bridge three Mn^II atoms in a tetradentate μ₃‐1κ²Se¹,Se²:2κSe⁴:3κSe⁵ manner. The tetranuclear complex is centrosymmetric and exhibits a central 8‐membered (MnSeAsSe)₂ ring. Cyclic [As₄Se₈]^4? ligands are present in the centrosymmetric dinuclear complex 2 and chelate the Mn(II) atoms through adjacent terminal Se atoms. Both 1 and 2 are linked into infinite chains through weak Mn···Se interactions. [{Mn(terpy)}₂(As₄S₈)] ( 3 ) and ( 4 ) can be obtained by hydrothermal reaction of [MnCl₂(terpy)] with As₂S₃ at respectively 150 °C and 190 °C. Whereas 3 exhibits an identical connectivity pattern to that of 2 , the coordination polymer 4 contains vierer chains that coordinate {(terpy)Mn}²⁺ fragments in a bidentate manner through terminal S atoms. The complex ( 5 ) contains double chains and results from the analogous hydrothermal reaction of [MnCl₂(tren)] with As₂S₃ at 150 °C.     

Solvothermal Synthesis and Structures of Lamellar [Mn(tren)2]Cl2 and the Dimeric and Polymeric Hexaselenidomanganese(II) Complexes [{Mn(Se6)(tren)}2] and $^{2}_{\infty}\rm [\{Mn(Se_{6})(tren)\}]$

Reaction of [MnCl₂(tren)] with tren (tris‐(2‐aminoethyl)amine) affords the coordination polymer ( 1 ), in which the primary amino groups of tridentate tren ligands connect [(tren)Mn]²⁺ fragments into a pseudo 6³ network. The Mn atoms exhibit a capped octahedral environment with the tertiary N atom of the second tetradentate tren ligand in the capping position. Treatment of MnCl₂ with Se at 1:2 molar ratio in H₂O/tren (10:1) at 150 °C leads to formation of the dinuclear complex [{Mn(μ‐Se₆)(tren)}₂] ( 2 ), which contains tetradentate tren ligands and two bridging hexaselenide ligands in the 1κSe¹ : 2κSe⁶ mode. In contrast, reaction of [MnCl₂(tren)] with Se at a 1:6 molar ratio under similar sovothermal conditions affords the isomeric coordination polymer ( 3 ). In this complex, Se₆^2? anions now bridge [(tren)Mn]²⁺ fragments into chains, that themselves are linked into polymeric sheets through one of the primary amino groups of the tetradentate tren ligands.     

The First Examples of Selenidogermanate Salts with Lanthanide Complex Counter Cations: Solvothermal Syntheses and Characterizations of [{Ln(en)3}2(μ‐OH)2]Ge2Se6 (Ln = Eu,Ho) and [{Ho(dien)2}2(μ‐OH)2]Ge2Se6

The lanthanide selenidogermanates [{Eu(en)₃}₂(μ‐OH)₂]Ge₂Se₆ ( 1 ), [{Ho(en)₃}₂(μ‐OH)₂]Ge₂Se₆ ( 2 ), and [{Ho(dien)₂}₂(μ‐OH)₂]Ge₂Se₆ ( 3 ) (en = ethylenediamine, dien = diethylenetriamine) were solvothermally prepared by the reactions of Eu₂O₃ (or Ho₂O₃), germanium, and selenium in en and dien solvents respectively. Compounds 1 – 3 are composed of selenidogermanate [Ge₂Se₆]^4– anion and dinuclear lanthanide complex cation [{Ln(en)₃}₂(μ‐OH)₂]⁴⁺ (Ln = Eu, Ho) or [{Ho(dien)₂}₂(μ‐OH)₂]⁴⁺. The [Ge₂Se₆]^4– anion is composed of two GeSe₄ tetrahedra sharing a common edge. The dinuclear lanthanide complex cations are built up from two [Ln(en)₃]³⁺ or [Ho(dien)₂]³⁺ ions joined by two μ‐OH bridges. All lanthanide(III) ions are in eight‐coordinate environments forming distorted bicapped trigonal prisms. In 1 – 3 , three‐dimensional supramolecular networks of the anions and cations are formed by N–H ··· Se and N–H ··· O hydrogen bonds. To the best of our knowledge, 1 – 3 are the first examples of selenidogermanate salts with lanthanide complex counter cations.     

Manganese(II) Coordination Polymers [{Mn(tren)}(As2Se4)] and [{Mn(tren)}(As4Se7)] with Infinite Selenidoarsenate(III) Chains $^{1}_{\infty}\rm [AsSe_{2}^{-}]$ and $^{1}_{\infty}\rm [As_{4}Se_{7}^{2-}]$

Solvothermal reaction of [MnCl₂(tren)] with elemental As and Se at 1:1:2 and 1:6:12 molar ratios in H₂O/tren (10:1) affords the 1D coordination polymers [{Mn(tren)}(As₂Se₄)] ( 1 ) and [{Mn(tren)}(As₄Se₇)] ( 2 ), respectively. 1 contains vierer infinite chains, which coordinate [(tren)Mn]²⁺ fragments through every second terminal Se atom of their corner‐sharing pyramidal AsSe₃ building units. The double chains of compound 2 are related to the chains 1 by a simple rearrangement of the connectivity pattern between the participating AsSe₃ pyramids and contain condensed centrosymmetric As₈Se₈ and As₄Se₄ rings.     

Cyclische Polyselenidoarsenate(III) und -antimonate(III): PPh4[Se5AsSe], PPh4[AsSe6–xSx], (PPh4)2[As2Se6] · 2 CH3CN und (PPh4)2[Se6SbSe]2

Cyclic Polyselenidoarsenates(III) and Polyselenidoantimonates(III): PPh₄[Se₅AsSe], PPh₄[AsSe_6–xS _x ], (PPh₄)₂[As₂Se₆] · 2 CH₃CN, and (PPh₄)₂[Se₆SbSe]₂ In acetonitrile, AsCl₃ and sodiumphenolate formed Cl₂AsOPh which then was reacted with PPh₄Se₅ and finally with Na₂Se to yield PPh₄[Se₅AsSe]. With Na₂S instead of Na₂Se, PPh₄[AsSe_6–xS_x] was obtained; the sulfur contents increased with increasing reaction temperature and time (x = 0.21 to 1.09). With PPh₄Se₂ instead of PPh₄Se₅, (PPh₄)₂[1,4-As₂Se₆] · 2 CH₃CN and PPh₄[Se₅AsSe] were the products. With SbCl₃ instead of AsCl₃, (PPh₄)₂[Se₆SbSe]₂ formed. PPh₄[Se₅AsSe] can also be produced from As₂Se₃, PPh₄Br, Na₂Se and selenium in acetonitrile. The crystal structure of PPh₄[SeAsSe₅] is isotypic with PPh₄[S₅AsS] (X-ray structure analysis with 2414 observed reflexions, R = 0.038). The Se₅AsSe^– ion consists of a six-membered AsSe₅ ring in chair conformation, and the As atom has an additional terminal Se atom. The compounds PPh₄[AsSe_6–xS_x] have the same crystal structures, with sulfur atoms taking all selenium positions at random, but with a preference for the terminal position. The anion in (PPh₄)₂[As₂Se₆] · 2 CH₃CN also has a six-membered ring structure in chair conformation, with two arsenic atoms in positions 1 and 4. The centrosymmetric anion in (PPh₄)₂[Se₆SbSe]₂ consists of a central Sb₂Se₂ ring, and a Se₆ ligand is bonded in a chelating manner to each Sb atom (X-ray structure analysis with 2669 observed reflexions, R = 0.099). ⁷⁷Se-NMR spectra are reported.     

Cs4BiAs3Se7: A Novel Bismuth‐Selenoarsenate with Infinite [BiAs3Se7]4– Chains Containing Two Different Anions, [AsSe3]3– and trans‐[As2Se4]4–

A new phase has been prepared by methanolothermal reaction of Cs₂CO₃, BiCl₃ and Li₃AsSe₃ at 130 °C for 36 hours. Cs₄BiAs₃Se₇ ( I ) reveals the first Bi‐selenoarsenate polyanionic chain [Bi(As₂Se₄)(AsSe₃)]^4–, consisting of Bi³⁺ ions in a distorted octahedral environment of [AsSe₃]^3– and trans‐[As₂Se₄]^4– units. The latter anion consists of a central “As₂⁴⁺” dumb‐bell whereby two Se atoms are attached to each of the As atoms. Structural Data: Space Group P2₁/n, a = 13.404(4) Å, b = 23.745(8) Å, c = 13.880(4) Å, β = 99.324(6)°, Z = 8.     

Synthesis and Structure of the Novel Pentaselenidohexaarsenate(I,II) Cluster Anion [As6Se5]2−

Methanolothermal reaction of [MnCl₃(9‐ane‐N₃)] with As₂Se₃ at 150 °C in the presence of Cs₂CO₃ affords violet‐coloured [Mn(9‐ane‐N₃)₂]As₆Se₅ ( 1 ). Its novel tricyclic selenidoarsenate(I,II) anion [As₆Se₅]^2? contains two five‐membered [As₃As(Se)Se] rings that are symmetry‐related by a crystallographic C₂ axis passing through the common As^I‐As^I bond between their respective first two ring members. The adjacent As^I atoms in the individual rings are bridged by the Se atom of the third [As₄Se] ring.     

Electroneutral coordination frameworks based on octahedral [Re<Subscript>6</Subscript>(μ<Subscript>3</Subscript>-Q)<Subscript>8</Subscript>(CN)<Subscript>6</Subscript>]<Superscript>4−</Superscript> complexes (Q = S,Se, Te) and the Mn<Superscript>2+</Superscript> cations

The novel coordination polymers, [{Mn(DMF)₃}₂{Re₆S₈(CN)₆}] (I), [{Mn(DMF)₂(H₂O)}₂{Re₆S₈(CN)₆}] · 2DMF (II), [{Mn(DMF)₃}₂{Re₆Se₈(CN)₆}] (III), [{Mn(DMF)₂(H₂O)}₂{Re₆Se₈(CN)₆}] · 2DMF (IV), and [{Mn(DMF)₂(H₂O)}₂{Re₆Te₈(CN)₆}] · 2DMF (V), were synthesized by interaction of the octahedral cluster complexes [Re₆(μ₃-Q)₈(CN)₆]^4? (Q = S, Se, Te) with the Mn²⁺ cations in the H₂O-DMF mixture. The crystal structures of compounds I, II, IV, and V were determined by X-ray diffraction analysis. The structural analogies between mononuclear cyanometallates and the obtained cluster coordination polymers were discussed.     

Selenoarsenate aus wäßriger Lösung. Die Kristallstruktur von Na3AsO3Se · 12 H2O und Na3AsSe4 · 9H2O

Selenoarsenates from Aqueous Solutions. Crystal Structures of Na₃AsO₃Se · 12 H₂O and Na₃AsSe₄ · 9 H₂O Selenoarsenates are obtained from aqueous solutions as colourless hydrated salts by reactions either of As₂O₃ with NaOH and selenium or of Na₂Se with As₂Se₃ and selenium under strictly anaerobic conditions. Besides of tetrahedral anions AsO₃Se³⁻ and AsSe₄³⁻, extensive hydrogen bridge systems with rather strong O H …︁s Se bonds determine the structures. Na₃AsO₃Se · 12 H₂O is orthorhombic (P2₁2₁2₁) with a = 9.220(3), b = 13.018(3), c = 14.048(4) Å, Z = 4. Cubic Na₃AsSe₄ ·s 9H₂O (P2₁3) with a = 12.149(3) Å is isotypic to Schlippe's salt, Na₃SbS₄ · 9 H₂O. The full X-ray structure analyses from four-circle diffractometer data show the selenium atoms of the AsO₃Se³⁻ and AsSe₄³⁻ anions to be H-acceptors in six Se …︁ H O hydrogen bridges with d(Se …︁ O) = 3.357–3.693 Å and d(Se …︁ H) = 2.47–2.89 Å. The As Se bond in AsO₃Se³⁻ (2.283 Å) is shorter than in AsSe₄³⁻ (2.319 Å).     

[Ga(en)3][Ga3Se7(en)] · H2O: Ein Galliumchalkogenid mit Ketten aus [Ga3Se6Se2/2(en)]3–-Bicyclen

[Ga(en)₃][Ga₃Se₇(en)] · H₂O: A Gallium Chalcogenide with Chains of [Ga₃Se₆Se_2/2(en)]^3– Bicycles The new selenidogallate [Ga(en)₃][Ga₃Se₇(en)] · H₂O ( I ) was produced from a ethylendiamine suspension of Ga and Se at 130 °C. I crystallizes in the orthorhombic space group Pna2₁ with unit constants a = 1347.9(3) pm, b = 961.6(1) pm, c = 1967.6(4) pm and Z = 4. The crystal structure contains an anion so far not observed in gallium chalcogenides. It is built from [Ga₃Se₆Se_2/2(en)]^3– bicycles of three Ga^IIIL₄ tetrahedra (L = en, Se) connected via selenium corners to linear chains. The cations, Ga^III ions coordinated by three ethylendiamine in a distorted octahedral geometry are positioned in the holes of the hexagonal rod packing of these chains.     

{[Mn2(μ3‐Tda)2(μ‐H2O)(H2O)2(bipy)]·DMF}n – a 2D Manganese(II) Coordination Polymer involving Six‐membered Binuclear Metallacycle Nodes

The single crystal X‐ray analysis of a novel thiophene‐2,5‐dicarboxylic acid (H₂Tda) Manganese(II) coordination polymer, {Mn₂(μ₃‐Tda)₂(μ‐H₂O)(H₂O)₂(bipy)]·DMF}_n, shows two different types of Mn²⁺‐ions with environment of Mn1O₆ and Mn2O₄N₂, and the complex is a two‐dimensional polymer as a result of bridging (Tda)^2? ligands and by connecting the carboxylate‐ and water‐bridged {Mn₂(μ‐Tda)₂(μ‐H₂O)} nodes.     

Koordinationspolymere 1, 2‐Dithiooxalato‐ und 1, 2‐Dithioquadratato‐Komplexe. Synthese und Strukturen von [BaCr2(bipy)2(1, 2‐dtox)4(H2O)2], [Ni(cyclam)(1, 2‐dtsq)]·2DMF, [Ni(cyclam)Mn(1, 2‐dtsq)2(H2O)2]·2H2O und [H3O][H5O2][Cu(cyclam)]3[Cu2(1, 2‐dtsq)3]2

Coordination Polymeric 1, 2‐Dithiooxalato and 1, 2‐Dithiosquarato Complexes. Syntheses and Structures of [BaCr₂(bipy)₂(1, 2‐dtox)₄(H₂O)₂], [Ni(cyclam)(1, 2‐dtsq)]·2DMF, [Ni(cyclam)Mn(1, 2‐dtsq)₂(H₂O)₂]·2H2₂, and [H₃O][H₅O₂][Cu(cyclam)]₃[Cu₂(1, 2‐dtsq)₃]₂ 1, 2‐Dithioxalate and 1, 2‐dithiosquarate ions have a pair of soft and hard donor centers and thus are suited for the formation of coordination polymeric complexes containing soft and hard metal ions. The structures of four compounds with building blocks containing these ligands are reported: In [BaCr₂(bipy)₂(1, 2‐dtox)₄(H₂O)₂] Barium ions and pairs of Cr(bipy)(1, 2‐dtox)₂ complexes form linear chains by the bisbidentate coordination of the dithiooxalate ligands towards Ba²⁺ and Cr³⁺. In [Ni(cyclam)(1, 2‐dtsq)]·2DMF short NÖH···O hydrogen bonds link the NiS₂N₄‐octahedra with C_2v‐symmetry to an infinite chain. In [Ni(cyclam)Mn(1, 2‐dtsq)₂(H₂O)₂]·2H₂O the 1, 2‐dithiosquarato ligand shows a rare example of S‐coordination towards manganese(II). The sulfur atoms of cis‐MnO₂S₄‐polyedra are weakly coordinated towards the axial sites of square‐planar NiN₄‐centers, thus forming a zig‐zag‐chain of Mn···Ni···Mn···Ni polyhedra. [H₃O][H₅O₂][Cu (cyclam)]₃[Cu₂(1, 2‐dtsq)₃]₂ contains square planar [Cu^II(cyclam)]²⁺ ions and dinuclear [Cu^I₂(1, 2‐dtsq)₃]^4— ions. Here each copper atom is trigonally planar coordinated by S‐donor atoms of the ligands. The Cu…Cu distance is 2.861(4)Å.     

Neue Gold‐Selen‐Komplexverbindungen: Synthesen und Strukturen von [Au10Se4(dpppe)4]Br2, [Au2Se(dppbe)]∞, [(Au3Se)2(dppbp)3]Cl2 und [Au34Se14(tpep)6(tpepSe)2]Cl6

Novel Gold Selenium Complexes: Syntheses and Structures of [Au₁₀Se₄(dpppe)₄]Br₂, [Au₂Se(dppbe)]_∞, [(Au₃Se)₂(dppbp)₃]Cl₂, and [Au₃₄Se₁₄(tpep)₆(tpep^Se)₂]Cl₆ The reaction of gold phosphine complexes [(AuX)(PR₃)] (X= halogen; R = org. group) with Se(SiMe₃)₂ yield to new chalcogeno bridged gold complexes. Especially within the use of polydentate phosphine ligands cluster complexes like [Au₁₀Se₄(dpppe)₄]Br₂ ( 1 ) (dpppe = 1, 5‐Bis(diphenylphosphino)pentane), [Au₂Se(dppbe)]_∞ ( 2 ) (1, 4‐Bis(diphenylphosphino)benzene), [(Au₃Se)₂(dppbp)₃]Cl₂ ( 3 ) (dppbp = 4, 4′‐Bis‐diphenylphosphino)biphenyl) und [Au₃₄Se₁₄(tpep)₆(tpep^Se)₂]Cl₆ ( 4 ) (tpep = 1, 1, 1‐Tris(diphenylphosphinoethyl)phosphine, tpep^Se = 1, 1‐Bis(diphenylphosphinoethyl)‐1‐(diphenylselenophosphinoethylphosphine) could be isolated and their structures could be determined by X‐ray diffraction. ( 1: Space group P1 (No. 2), Z = 2, a = 1642.1(11), b = 1713.0(9), c = 2554.0(16) pm, α = 80.41(3)°, β = 76.80(4)°, γ = 80.92(4)°; 2: Space group P2₁/n (No. 14), Z = 4, a = 947.3(2), b = 1494.9(3), c = 2179.6(7) pm, β = 99.99(3)°; 3: Space group P2₁/c (No. 14), Z = 8, a = 2939.9(6), b = 3068.4(6), c = 3114.5(6) pm, β = 109.64(3)°; 4: Space group P1 (No. 2), Z = 1, a = 2013.7(4), b = 2420.6(5), c = 2462.5(5) pm, α = 77.20(3), β = 74.92(3), γ = 87.80(3)°).     

Dimeric Structure of [(η2‐NO3)2(tpy)Bi(μ‐OH)2Bi(tpy)(η2‐NO3)2]

The synthesis and single crystal X‐ray structure determination are reported for the 2,2′ : 6′,2″‐terpyridine (= tpy) adduct of bismuth(III) nitrate. The hydroxide‐bridged dimer [(η²‐NO₃)₂(tpy)Bi(μ‐OH)₂Bi(tpy)(η²‐NO₃)₂] with nine‐coordinate geometry about Bi was the only isolable product from all crystallization attempts in varying ratios of Bi(NO₃) : terpy.; [(η²‐NO₃)₂(tpy)Bi(μ‐OH)₂Bi(tpy) · (η²‐NO₃)₂] is triclinic, P 1, a = 7.941(8), b = 10.732(9), c = 11.235(9) Å; α = 63.05(1), β = 85.01(1), γ = 79.26(1)°, Z = 1, dimer, R = 0.058 for N₀ = 2319.     

[{Cp*(OC)2Re}2(μ‐POH)], ein Zweikernkomplex mit einem verbrückenden Hydroxiphosphiniden‐Liganden

[{Cp*(OC)₂Re}₂(μ‐POH)], a Dinuclear Complex with a Bridging Hydroxiphosphinidene Ligand The reaction of [{Cp*(OC)₂Re}₄(μ₄‐η¹ : η¹ : η¹ : η¹‐P₂)] ( 1 ) with 0.1 m HCl gives [{Cp*(OC)₂Re}₂(μ‐POH)] ( 2 ), the X‐ray crystal structure of which reveals a dinuclear rhenium complex with a μ‐POH (hydroxiphosphinidene) ligand.     

{1,1′‐(Dimethylsilylene)bis[methanechalcogenolato]}diiron Complexes [2Fe2E(Si)] (E=S,Se, Te) – [FeFe] Hydrogenase Models

(Bis‐selenolato) and (bis‐tellurolato)diiron complexes [2Fe2E(Si)] were prepared and compared with the known (bis‐thiolato)diiron complex A to assess their ability to produce hydrogen from protons. Treatment of [Fe₃(CO)₁₂] with 4,4‐dimethyl‐1,2,4‐diselenasilolane ( 1 ) in boiling toluene afforded hexacarbonyl{μ‐{[1,1′‐(dimethylsilylene)bis[methaneselenolato‐κSe : κSe]](2 ?)}}diiron(Fe? Fe) ( 2 ). The analog bis‐tellurolato complex hexacarbonyl{μ‐{[1,1′‐(dimethylsilylene)bis[methanetellurolato‐κTe : κTe]](2 ?)}}diiron(Fe? Fe) ( 3 ) was obtained by treatment of [Fe₃(CO)₁₂] with dimethylbis(tellurocyanatomethyl)dimethylsilane, which was prepared in situ. All compounds were characterized by NMR, IR spectroscopy, mass spectrometry, elemental analysis and single‐crystal X‐ray analysis. The electrocatalytic properties of the [2Fe2X(Si)] (X=S, Se, Te) model complexes A, 1 , and 2 towards hydrogen formation were evaluated.     

Intermolecular Se···I Interactions Identified in Cu11(μ9‐Se)(μ3‐I)3[Se2P(OEt)2]6 Form a One Dimensional Polymeric Chain

The undecanuclear copper cluster Cu₁₁(μ9‐Se)(μ₃‐I)₃[Se₂P(OEt)₂]₆ 1 , has been isolated along with Cu₈(μ₈‐Se)[Se₂P(OEt)₂]₆ 2 , from the reaction of NH₄Se₂P(OEt)₂, Cu(CH₃CN)₄PF₆, and Bu₄NI in a molar ratio of 3:2:2 in diethyl ether. The molecular formulation of 1 was confirmed by elemental analysis, positive FAB mass spectrometry, multinuclear NMR (¹H, ³¹P, and ⁷⁷Se), and X‐ray diffraction. In cluster 1 eleven copper atoms adopt the geometry of a 3,3,4,4,4‐pentacapped trigonal prism with a selenium atom in the center. The coordination geometry for the central, nonacoordinated selenium atom is tricapped trigonal prismatic. In addition, the central core Cu₁₁Se is further stabilized by three iodides and six dsep ligands. Besides, weak inter‐molecular Se···I interactions (3.949–3.972 Å) are uncovered and form a one dimensional polymeric chain.     

Kristallstruktur,Schwingungsspektren und Normalkoordinatenanalyse von (n‐Bu4N)2[{Ru(NO)ClI2}2(μ‐I2)] · 2 I2

Crystal Structure, Vibrational Spectra, and Normal Coordinate Analysis of ( n ‐Bu₄N)₂[{Ru(NO)ClI₂}₂(μ‐I₂)] · 2 I₂ By treatment of (n‐Bu₄N)₂[Ru(NO)I₅] with (n‐Bu₄N)Cl in dichloromethane (n‐Bu₄N)₂[{Ru(NO)ClI₂}₂(μ‐I₂)] is formed. The X‐Ray structure determination on a single crystal of (n‐Bu₄N)₂[{Ru(NO)ClI₂}₂(μ‐I₂)] · 2 I₂ (monoclinic, space group I 2/a, a = 20.446(6), b = 11.482(8), c = 27.225(3) Å, β = 107.51(4)°, Z = 4) reveals a dinuclear iodine bridged structure, in which the chlorine atoms are trans positioned to the nitrosyl groups. The low temperature IR and Raman spectra have been recorded of (n‐Bu₄N)₂[{Ru(NO)ClI₂}₂(μ‐I₂)] · 2 I₂ and are assigned by normal coordinate analysis. A good agreement between observed and calculated frequencies is achieved. The valence force constants are f_d(NO) = 14.08, f_d(RuN) = 5.58, f_d(RuCl) = 1.52, f_d(RuI_t) = 0.90 and f_d(RuI_b) = 0.76 mdyn/Å.     

Homoleptic Octahedral Methylamine Complexes of Manganese(II): Solvothermal Syntheses and Crystal Structures of [Mn(NH2CH3)6]Cl2 and the Pentaselenide [Mn(NH2CH3)6]Se5

[Mn(NH₂CH₃)₆]Cl₂ ( 1 ) and [Mn(NH₂CH₃)₆]Se₅ ( 2 ) were prepared by solvothermal reactions in liquid methylamine from MnCl₂ at 150 °C for 1 and from a mixture of MnCl₂, Rb₂Se and selenium at 120 °C for 2 . Both 1 and 2 were obtained in high yields as colorless and dark‐red crystals and represent the first homoleptic methylamine complexes with coordination number six. Compound 1 crystallizes rhombohedral (R$\bar{3}$ , Z = 3) and is built of only slightly distorted octahedral [Mn(NH₂CH₃)₆]²⁺ cations and Cl^– anions. Compound 2 crystallizes orthorhombic (Pnna, Z = 4) and is built of octahedral [Mn(NH₂CH₃)₆]²⁺ cations showing a strong angular distortion and of Se₅^2– anions in the form of chains in transoid conformation. DFT calculations reveal an almost undistorted ground state structure for [Mn(NH₂CH₃)₆]²⁺ with N–Mn–N angular distortions of 1° from orthogonality, close to the structure found for the complex in 1 . The calculated energy necessary for a distortion as found in the structure of 2 is rather low and amounts to 26 kJmol^–1 which is in the range typical for hydrogen bonds. The N–Mn–N angular distortions of the complex cation in 2 , observed in the range of 10°, is caused by cation‐anion interactions in the crystal structure by N–H ···· Se hydrogen bonds.