Evaluation of newly synthesized derivatives of bis(hydrazine‐1‐carbothioamide) and their metal complexes synthesized in bulk and nano size as potent anticancer agents

A series of new metal complexes were synthesized in both bulk and nano size using green methods, starting with the reaction of (E)‐N′‐[(E)‐2‐bromobenzylidene]‐4‐oxo‐4‐(piperidin‐1‐yl)but‐2‐enehydrazide with thiosemicarbazide and different metal halides such as CuI·2H₂O, CuCl₂·2H₂O, CoCl₂·2H₂O, and ZnCl₂·2H₂O, and metal nitrate such as Ga(NO₃)₃·2H₂O. Structures of these metal complexes were confirmed using different spectroscopic methods, elemental analysis, electronic spectra, and microanalytical methods (scanning electron microscopy and transmission electron microscopy) for nano complexes. The distorted octahedral geometry for all complexes was suggested based on magnetic moments and electronic spectral studies. The cytotoxic activity of the compounds was investigated against human hepatocellular carcinoma (HepG2) and human colorectal carcinoma (HCT‐116) cell lines. Most tested compounds had higher inhibitory activity than the standard vinblastine drug. Interestingly, the nano‐sized Ga(III) complex 11 was the most potent compound against the two tested cell lines, with 50% inhibitory concentration (IC₅₀) of 2.56 μg/mL for HepG2, compared with the reference drug vinblastine (IC₅₀ 15.6 μg/mL), and IC₅₀ 4.64 μg/mL for HCT‐116, compared with the standard (IC₅₀ 13.9 μg/mL). The bioassay results helped us identify new potent and selective anticancer agents.     

Antibacterial cellulose acetate films incorporated with N‐halamine‐modified nano‐crystalline cellulose particles

Cellulose acetate (CA) membranes have been widely used as food packaging materials as well as reverse osmosis systems. This study presents the manufacturing of composite CA film with antibacterial properties which is essential for CA film applications in the industry. N‐Halamine precursor of polymethacrylamide‐modified nano‐crystalline cellulose particles (NCC‐PMAMs) were prepared and incorporated into CA film. The composite films with intercalated structure were formed via a solvent‐casting technique. After chlorination, the composite film CA/NCC‐PMAM‐Cl‐1.0 with 1.82 × 10¹⁶ atoms/cm² covalently bonded chlorine showed excellent antibacterial properties by inactivating 6.04 logs of Staphylococcus aureus and 6.27 logs of Escherichia coli within 10 and 5 min, respectively. According to X‐ray diffraction spectra, NCC‐PMAMs behaved as a facilitator for film crystallization. The mechanical strength of the composite film also increased compared with that of pure CA film. However, the composite film became brittle and the maximum decomposition temperature decreased slightly. Preliminary data of in vitro cytocompatibility evaluation indicate that the film is not toxic and has potential use in food packaging. Copyright © 2016 John Wiley & Sons, Ltd.     

Dual complex of amylose with iodine and magnetite nano‐crystallites: Enhanced superparamagnetic and catalytic performance for synthesis of spiro‐oxindoles

Mass magnetization of magnetite nanoparticles was enhanced by disassembling and encapsulating their building nano‐crystallites with water‐soluble starch. Incorporation of iodine into the as‐prepared nano‐conglomerate led to formation of a ternary nano‐complex and further enhancement of its superparamagnetic susceptibility. As an additional evidence for the anomalously heightened superparamagnetic property, the ternary nano‐complex showed lower magnetic remanence and coercivity than the pristine magnetite it was made from. These findings were ascribed to significant changes in, at least, size of the magnetite nano‐crystallites during formation of the nano‐composite. A significant enhancement was also observed in the catalytic efficiency of the nano‐composite, as was successfully exemplified in the synthesis of some novel spiro[oxindole‐dihydropyridine]s via a three‐component reaction between isatins, furan‐2,4(3H,5H)‐dione and aminouracils ‘on water’.     

Electrochemistry and Electrocatalysis of a Nafion/Nano‐CaCO3/Hb Film Modified Carbon Ionic Liquid Electrode Using BMIMPF6 as Binder

In this paper a room temperature ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) was used as binder for the construction of carbon ionic liquid electrode (CILE) and a new electrochemical biosensor was developed for determination of H₂O₂ by immobilization of hemoglobin (Hb) in the composite film of Nafion/nano‐CaCO₃ on the surface of CILE. The Hb modified electrode showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa and E_pc as ?0.265 V and ?0.470 V (vs. SCE). The formal potential (E°′) was got by the midpoint of E_pa and E_pc as ?0.368 V, which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The peak to peak separation was 205 mV in pH 7.0 Britton–Robinson (B–R) buffer solution at the scan rate of 100 mV/s. The direct electrochemistry of Hb in the film was carefully investigated and the electrochemical parameters of Hb on the modified electrode were calculated as α=0.487 and k_s=0.128 s^?1. The Nafion/nano‐CaCO₃/Hb film electrode showed good electrocatalysis to the reduction of H₂O₂ in the linear range from 8.0 to 240.0 μmol/L and the detection limit as 5.0 μmol/L (3σ). The apparent Michaelis–Menten constant (K_M^app) was estimated to be 65.7 μmol/L. UV‐vis absorption spectroscopy and FT‐IR spectroscopy showed that Hb in the Nafion/nano‐CaCO₃ composite film could retain its native structure.     

Study on the formation defect of nano imprinted optical waveguide devices and nano‐indentation detection

In this study, we try to discuss the formation defects found in the application of air‐assisted soft mold UV‐cured nano imprint lithography technology in the manufacture of optical waveguide devices, and find a solution. Meanwhile, we try to utilize the nano‐indentation technology in the material quality detection for optical waveguide devices. The results tell us that there is a corresponding relationship between the indentation hardness and procedure parameters under nano‐meter level depth. For example, the indentation tends to be harder when it is lowly loaded and shallow in depth. Closer it gets to the edge of waveguide's turning, lower the indentation hardness will be. At the same time, different exposal process results in different structural intensity. Therefore, the high structural intensity without forming defects of optical waveguide with less optical loss and better optical transmission. Copyright © 2008 John Wiley & Sons, Ltd.     

Improvement in gas separation properties of a polymeric membrane through the incorporation of inorganic nano‐particles

The present work tries to introduce a high‐performance nano‐composite membrane by using polydimethylsiloxane (PDMS) as its main polymer matrix to meet some specific requirements in industrial gas separations. Different nano‐composite membranes were synthesized by incorporating various amounts of nano‐sized silica particles into the PDMS matrix. A uniform dispersion of nano‐particles in the host membranes was obtained. The nano‐composite membranes were characterized morphologically by scanning electron microscopy and atomic force microscopy. Separation properties, permeability, and ideal selectivity of C₃H₈, CH₄, and H₂ through the synthesized nano‐composite membranes with different nano‐particle contents (0.5, 1, 1.5, 2, 2.5, and 3 wt%) were investigated at different pressures (2, 3, 4, 5, 6, and 7 atm) and constant temperature (35°C). It was found out that a 2 wt% loading of nano‐particles into the PDMS matrix is optimal to obtain the best separation performance. Afterwards, sorption experiments for the synthesized nano‐composite membranes were carried out, and diffusion coefficients of the gases were calculated based on solution‐diffusion mechanism. Gas permeation and sorption experiments showed an increase in sorption and a decrease in diffusion coefficients of the gases through the nano‐composite membranes by adding nano‐particles into the host polymer matrix. Copyright © 2011 John Wiley & Sons, Ltd.     

Isoconversional method to explore the cure reaction mechanisms and curing kinetics of DGEBA/EMI‐2,4/nano‐SiC system

The curing kinetics of the diglycidyl ether of bisphenol‐A (DGEBA)/2‐ethyl‐4‐methylimidazole (EMI‐2,4)/nano‐sized carborundum (nano‐SiC) system was studied by means of nonisothermal differential scanning calorimetry (DSC). An isoconversional method of kinetic analysis yields a dependence of the effective activation energy E on the extent of conversion that decreases initially, and then increases as the cure reaction proceeds. The variations of E were used to study the cure reaction mechanisms, and the Shrinking Core Model was used to study the resin–particle reaction. The results show that the presence of nano‐SiC particles prevents the occurrence of vitrification, as well as inhibits the cure reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 371–379, 2006     

Nano‐emulsion use for the synthesis of polyaniline nano‐grains or nano‐fibers

We report that nano‐emulsions can be creatively used as a morphology selective synthesis method to prepare not only nano‐grains but also nano‐fibers with high selectivity. Synthesis of the two different morphological materials was demonstrated using polyaniline synthesis as a model case. Polyaniline nano‐grains were synthesized from aniline molecules in nano‐size aqueous droplets as polymerization sites whose droplets were generated by inverse water‐in‐oil nano‐emulsion use, and polyaniline nano‐fibers were synthesized from aniline in aqueous nano‐dimensional channels as polymerization sites whose channels were generated by direct oil‐in‐water nano‐emulsion use containing high population of oil droplets. Using the approaches, we successfully synthesized nano‐fibers of 60 nm diameter with 0.5 µm length and also nano‐grains having diameter of 60–80 nm. The two different polymerization sites of nano‐scale dimension were made by changing the ratio among surfactant, aqueous aniline/HCl solution, and oil, i.e. organic solvent. We found the nano‐fibers synthesized from the channels formed by the direct oil‐in‐water nano‐emulsion have higher bulk electrical conductivity than the nano‐grains which were synthesized from the droplets formed by the inverse water‐in‐oil emulsion. We also found that the emulsion use allows us to use a room temperature synthesis unlike conventional synthesis methods which require to use ice bath temperature. Physical properties of both nano‐fibers and nano‐grains synthesized were characterized by Fourier transform infrared (FTIR), UV–Vis spectra, scanning electron microscopy (SEM), and four probes conductivity measurement. Copyright © 2009 John Wiley & Sons, Ltd.     

A New Amperometric Biosensor Based on HRP/Nano-Au/L-Cysteine/Poly（o-Aminobenzoic acid）-Membrane-Modified Platinum Electrode for the Determination of Hydrogen Peroxide

The third generation amperometric biosensor for the determination of hydrogen peroxide （H2O2） has been described. For the fabrication of biosensor, o-aminobenzoic acid （oABA） was first electropolymerized on the surface of platinum （Pt） electrode as an electrostatic repulsion layer to reject interferences. Horseradish peroxidase （HRP） absorbed by nano-scaled particulate gold （nano-Au） was immobilized on the electrode modified with polymerized o-aminobenzoic acid （poABA） with L-cysteine as a linker to prepare a biosensor for the detection of H2O2. Amperometric detection of H2O2 was realized at a potential of ＋20 mV versus SCE. The resulting biosensor exhibited fast response, excellent reproducibility and sensibility, expanded linear range and low interferences. Temperature and pH dependence and stability of the sensor were investigated. The optimal sensor gave a linear response in the range of 2.99×10^-6 to 3.55×10^-3 mol·L^-1 to H2O2 with a sensibility of 0.0177 A·L^-1·mol^-1 and a detection limit （S/N = 3） of 4.3×10^-7 mol·L^-1. The biosensor demonstrated a 95% response within less than 10 s.     

Boehmite nano‐particles functionalized with silylpropylamine‐supported Keggin‐type heteropolyacids: Catalysts for epoxidation of alkenes

Boehmite nano‐particles with a high degree of surface hydroxyl groups were covalently functionalized by 3‐(trimethoxysilyl)‐propylamine to support H₃[PMo₁₂O₄₀], H₃[PW₁₂O₄₀], H₄[SiMo₁₂O₄₀] and H₄[SiW₁₂O₄₀] Keggin‐type heteropolyacids. After characterization of these catalysts by FT‐IR, powder X‐ray diffraction, TG/differential thermal analysis, CHN, inductively coupled plasma and transmission electron microscopy techniques, they were applied to the epoxidation of cis‐cycloocten. The progress of the reactions was investigated by gas–liquid chromatography, and the catalytic procedures were optimized for the parameters involved, such as the solvent and oxidant. The results showed that 25 mg of supported H₃[PMo₁₂O₄₀] catalyst in 1 ml C₂H₄Cl₂ with 0.5 mmol cyclooctene and 1 mmol tert‐butylhydroperoxide at reflux temperature gave 98% yield over 15 min. Recycling experiments revealed that these nanocatalysts could be repeatedly applied up to five times for a nearly complete epoxidation of cis‐cycloocten. The optimized experimental conditions were also used successfully for the epoxidation of some other alkenes, such as cyclohexene, styrene and α‐methyl styrene.     

Electrical and self‐heating properties of UHMWPE‐EMMA‐NiCF composite films

Conductive polymer composites (CPC) containing nickel‐coated carbon fiber (NiCF) as filler were prepared using ultra‐high molecular weight polyethylene (UHMWPE) or its mixture with ethylene‐methyl methacrylate (EMMA) as matrix by gelation/crystallization from dilute solution. The electrical conductivity, its temperature dependence, and self‐heating properties of the CPC films were investigated as a function of NiCF content and composition of matrix in details. This article reported the first successful result for getting a good positive temperature coefficient (PTC) effect with 9–10 orders of magnitude of PTC intensity for UHMWPE filled with NiCF fillers where the pure UHMWPE was used as matrix. At the same time, it was found that the drastic increase of resistivity occurred in temperature range of 120–200 °C, especially in the range of 180–200 °C, for the specimens with matrix ratio of UHMWPE and EMMA (UHMWPE/EMMA) of 1/0 and 1/1 (NiCF = 10 vol %). The SEM observation revealed to the difference between the surfaces of NiCF heated at 180 and 200 °C. Researches on the self‐heating properties of the composites indicated a very high heat transfer for this kind of CPCs. For the 1/1 composite film with 10 vol % NiCF, surface temperature (T_s) reached 125 °C within 40 s under direct electric field where the supplied voltage was only 2 V corresponding to the supplied power as 0.9 W. When the supplied voltage was enough high to make T_s beyond the melting point of UHMWPE component, the T_s and its stability of CPC films were greatly influenced by the PTC effect. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1253–1266, 2009     

Simultaneous detection of 19 K‐ras mutations by free‐solution conjugate electrophoresis of ligase detection reaction products on glass microchips

We demonstrate here the power and flexibility of free‐solution conjugate electrophoresis (FSCE) as a method of separating DNA fragments by electrophoresis with no sieving polymer network. Previous work introduced the coupling of FSCE with ligase detection reaction (LDR) to detect point mutations, even at low abundance compared to the wild‐type DNA. Here, four large drag‐tags are used to achieve free‐solution electrophoretic separation of 19 LDR products ranging in size from 42 to 66 nt that correspond to mutations in the K‐ras oncogene. LDR‐FSCE enabled electrophoretic resolution of these 19 LDR‐FSCE products by CE in 13.5 min (E = 310 V/cm) and by microchip electrophoresis in 140 s (E = 350 V/cm). The power of FSCE is demonstrated in the unique characteristic of free‐solution separations where the separation resolution is constant no matter the electric field strength. By microchip electrophoresis, the electric field was increased to the maximum of the power supply (E = 700 V/cm), and the 19 LDR‐FSCE products were separated in less than 70 s with almost identical resolution to the separation at E = 350 V/cm. These results will aid the goal of screening K‐ras mutations on integrated “sample‐in/answer‐out” devices with amplification, LDR, and detection all on one platform.     

Efficient Synthesis of (3E)‐3‐[Amino(aryl)methylidene]chromane‐2,4‐diones (=(3E)‐3‐[Amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) via a Three‐Component Reaction

The Michael‐type addition of a 4‐hydroxycoumarin (=4‐hydroxy‐2H‐1‐benzopyran‐2‐one) 1 to a β‐nitrostyrene (=(2‐nitroethenyl)benzene) 2 in the presence of AcONH₄ leads to substituted (3E)‐3‐[amino(aryl)methylidene]chroman‐2,4‐diones (=(3E)‐3‐[amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) 4 (Table 1). High yields, short reaction time, and easy workup are advantages of this novel one‐pot three‐component reaction.     

One‐Pot Synthesis of 1,4‐Dihydro‐2‐thioxo‐2H‐3,1‐benzoxazine‐4‐acetic Acid Derivatives by the Reaction of 2‐Isothiocyanatophenyl Ketones with Lithium Enolates of Acetates and Tertiary Acetamides

The one‐pot synthesis of 4‐aryl‐1,4‐dihydro‐2‐thioxo‐2H‐3,1‐benzoxazine‐4‐acetic acid derivatives 2 was achieved in good yields by the reaction of aryl(2‐isothiocyanatophenyl)methanones 1 with lithium enolates of acetates and tertiary acetamides. (2E)‐1‐(2‐Isothiocyanatophenyl)‐3‐phenylprop‐2‐en‐1‐one ( 3 ) gave 1,4‐dihydro‐4‐[(1E)‐2‐phenylethenyl]‐2‐thioxo‐2H‐3,1‐benzoxazine‐4‐acetic acid derivatives 4 in good yields as well.     

Layer effects of photovoltaic heterojunction of fully conjugated heterocyclic aromatic rigid‐rod polymer poly‐p‐phenylenebenzobisoxazole

Poly‐p‐phenylenebenzobisoxazole (PBO) contains a fully conjugated rod‐like backbone entailing excellent optoelectronic properties and superior stabilities. Poly(2,3‐dihydrothieno‐1,4‐dioxin):polystyrenesulfonate (PEDOT:PSS) is a hole transferring medium, which was spun into a thin‐film between PBO and indium‐tin‐oxide to facilitate photovoltaic (PV) effect by forming a donor‐acceptor interlayer to separate and to transport photoinduced charges. Optimum PBO thickness for PV heterojunctions was about 71 nm at which the hole transferring PEDOT:PSS generated the maximum short circuit current (I_sc) at a thickness of 115 nm. By using a layer of lithium fluoride (LiF) as an electron transferring layer adhering to Al cathode, the most open circuit voltage (V_oc) and I_sc were achieved with a LiF thickness of 1–2 nm because of possible electric dipole effect leading to an increase of V_oc from 0.7 to 0.92 V and of I_sc from about 0.1 to 0.2 μA. No PV response was observed for all PBO homojunctions because of insufficient exciton separation into electrons and holes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 988–993, 2007     

Bis(5,7‐dimethyl‐8‐hydroxyquinolinato)platinum(II) Complex for Efficient Organic Heterojunction Solar Cells

Organic photovoltaic (OPV) cells using metal(II) (Pt, Pd, Cu, and Ni) chelates of 8‐hydroxyquinoline (Hq) or 5,7‐dimethyl‐8‐hydroxy‐quinoline (HMe₂q) as an electron donor were fabricated by vacuum deposition. The bis(5,7‐dimethyl‐8‐hydroxyquinolinato)platinum(II) [Pt(Me₂q)₂]‐based OPVs showed the best performance with an open voltage (V_OC) of 0.42 V, a short circuit current density (J_SC) of 14.8 mA cm^?2, and a maximum power conversion efficiency (η_P) of 2.4 %. The X‐ray single‐crystal structures together with the grazing incidence X‐ray diffraction (GIXRD) data of thin film samples reveal that the peripheral methyl substituent(s) and platinum(II) ion are essential for the high degree of film crystallinity resulting in improved performance of the as‐fabricated field‐effect transistors (FETs) and OPV cells.     

Enhanced β‐phase in PVDF polymer nanocomposite and its application for nanogenerator

Harvesting energy from the ambient mechanical energy by using flexible piezoelectric nanogenerator is a revolutionary step toward achieving reliable and green energy source. Polyvinylidene fluoride (PVDF), a flexible polymer, can be a potential candidate for the nanogenerator if its piezoelectric property can be enhanced. In the present work, we have shown that the polar crystalline β‐phase of PVDF, which is responsible for the piezoelectric property, can be enhanced from 48.2% to 76.1% just by adding ZnO nanorods into the PVDF matrix without any mechanical or electrical treatment. A systematic investigation of PVDF‐ZnO nanocomposite films by using X‐ray diffractometer, Fourier transform infrared spectroscopy, and polarization‐electric field loop measurements supports the enhancement of β‐phase in the flexible nanocomposite polymer films. The piezoelectric constant (d₃₃) of the PVDF‐ZnO (15 wt%) film is found to be maximum of approximately −1.17 pC/N. Nanogenerators have been fabricated by using these nanocomposite films, and the piezoresponse of PVDF is found to enhance after ZnO loading. A maximum open‐circuit voltage ~1.81 V and short‐circuit current of 0.57 μA are obtained for 15 wt% ZnO‐loaded PVDF nanocomposite film. The maximum instantaneous output power density is obtained as 0.21 μW/cm² with the load resistance of 7 MΩ, which makes it feasible for the use of energy harvesting that can be integrated to use for driving small‐scale electronic devices. This enhanced piezoresponse of the PVDF‐ZnO nanocomposite film‐based nanogenerators attributed to the enhancement of electroactive β‐phase and enhanced d₃₃ value in PVDF with the addition of ZnO nanorods.     

β‐cyclodextrin‐based polymeric nano‐receptor: the self‐assembly of cyclodextrin‐appended comb‐copolymer

Well‐defined β‐cyclodextrin (β‐CD)‐appended biocompatible comb‐copolymer ethyl cellulose‐graft‐poly (ε‐caprolactone) (EC‐g‐PCL) was synthesized via the combination of ring‐opening polymerization (ROP) and click chemistry. The resulting products were characterized by ¹H NMR, FT‐IR spectroscopy, and GPC. The synthesized comb‐copolymer could assemble to micelles, with the surface covered by β‐CD. The inclusion with ferrocene derivation was investigated by cyclic voltammetric (CV) experiments, which indicated the potential application of the micelles as nano‐receptors for molecule recognization and controlled drug release. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,crystal structures and anti‐inflammatory activity of four 3,5‐bis(arylidene)‐N‐benzenesulfonyl‐4‐piperidone derivatives

3,5‐Bis(arylidene)‐4‐piperidone (BAP) derivatives display good antitumour and anti‐inflammatory activities because of their double α,β‐unsaturated ketone structural characteristics. If N‐benzenesulfonyl substituents are introduced into BAPs, the configuration of the BAPs would change significantly and their anti‐inflammatory activities should improve. Four N‐benzenesulfonyl BAPs, namely (3E,5E)‐1‐(4‐methylbenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one dichloromethane monosolvate, C₂₈H₂₁F₆NO₃S·CH₂Cl₂, ( 4 ), (3E,5E)‐1‐(4‐fluorobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one, C₂₇H₁₈F₇NO₃S, ( 5 ), (3E,5E)‐1‐(4‐nitrobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one, C₂₇H₁₈F₆N₂O₅S, ( 6 ), and (3E,5E)‐1‐(4‐cyanobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one dichloromethane monosolvate, C₂₈H₁₈F₆N₂O₃S·CH₂Cl₂, ( 7 ), were prepared by Claisen–Schmidt condensation and N‐sulfonylation. They were characterized by NMR, FT–IR and HRMS (high resolution mass spectrometry). Single‐crystal structure analysis reveals that the two 4‐(trifluoromethyl)phenyl rings on both sides of the piperidone ring in ( 4 )–( 7 ) adopt an E stereochemistry of the olefinic double bonds. Molecules of both ( 4 ) and ( 6 ) are connected by hydrogen bonds into one‐dimensional chains. In ( 5 ) and ( 7 ), pairs of adjacent molecules embrace through intermolecular hydrogen bonds to form a bimolecular combination, which are further extended into a two‐dimensional sheet. The anti‐inflammatory activity data reveal that ( 4 )–( 7 ) significantly inhibit LPS‐induced interleukin (IL‐6) and tumour necrosis factor (TNF‐α) secretion. Most importantly, ( 6 ) and ( 7 ), with strong electron‐withdrawing substituents, display more potential inhibitory effects than ( 4 ) and ( 5 ).     

Engineering a Cu‐MOF Nano‐Catalyst by using Post‐Synthetic Modification for the Preparation of 5‐Substituted 1H‐Tetrazoles

A new nano scale Cu‐MOF has been obtained via post‐synthetic metalation by immersing a Zn‐MOF as a template in DMF solutions of copper(II) salts. The Cu‐MOF serves as recyclable nano‐catalyst for the preparation of 5‐substituted 1H‐tetrazoles via [3 + 2] cycloaddition reaction of various nitriles and sodium azide in a green medium (PEG). The post‐synthetic metalated MOF were characterized by FT‐IR spectroscopy, powder X‐ray diffraction (PXRD), atomic absorption spectroscopy (AAS), and energy dispersive X‐ray spectroscopy (EDX) techniques. The morphology and size of the nano‐catalyst were determined by field emission scanning electron microscopy (FE‐SEM).