Effect of anionic ion-pairing reagent hydrophobicity on selectivity of peptide separations by reversed-phase liquid chromatography

Despite the continuing dominance of trifluoroacetic acid (TFA) as the anionic ion-pairing reagent of choice for peptide separations by reversed-phase high-performance liquid chromatography (RP-HPLC), we believe that a step-by-step approach to re-examining the relative efficacy of TFA compared to other ion-pairing reagents is worthwhile, particularly for the design of separation protocols for complex peptide mixtures, e.g., in proteomics applications. Thus, we applied RP-HPLC in the presence of different concentrations of anionic ion-pairing reagents - phosphoric acid, TFA, pentafluoropropionic acid (PFPA) and heptafluorobutyric acid (HFBA)--to a mixture of three groups of four 10-residue peptides, these groups containing peptides of +1, +3 or +5 net charge. Overall separation of the 12-peptide mixture improved with increasing reagent hydrophobicity (phosphate- < TFA- < PFPA- < HFBA-) and/or concentration of the anion, with reagent hydrophobicity having a considerably more pronounced effect than reagent concentration. HFBA, in particular, achieved an excellent separation at a concentration of just 10 mM, whereby the peptides were separated by charged groups (+1 < +3 < +5) and hydrophobicity within these groups. There was an essentially equal effect of reagent hydrophobicity and concentration on each positive charge of the peptides, a useful observation for prediction of the effect of varying counterion concentration hydrophobicity and/or concentration during optimization of peptide purification protocols. Peak widths were greater for the more highly charged peptides, although these could be decreased significantly by raising the acid concentration; concomitantly, peptide resolution increased with increasing concentration of ion-pairing reagent.     

Effect of anionic ion-pairing reagent concentration (1-60 mM) on reversed-phase liquid chromatography elution behaviour of peptides

The homologous series of volatile perfluorinated acids-trifluoroacetic acid (TFA), pentafluoropropionic acid (PFPA) and heptafluorobutyric acid (HFBA)--continue to be excellent anionic ion-pairing reagents for reversed-phase high-performance liquid chromatography (RP-HPLC) after more than two decades since their introduction to this field. It was felt that a thorough, step-by-step re-examination of the effects of anionic ion-pairing reagents over a wide concentration range on RP-HPLC peptide elution behaviour is now due, particularly considering the continuing dominance of such reagents for peptide applications. Thus, RP-HPLC was applied over a range of 1-60 mM phosphoric acid, TFA, PFPA and HFBA to two mixtures of 18-residue synthetic peptides containing either the same net positive charge (+4) or varying positive charge (+1, +2, +3, +4). Peptides with the same charge are resolved very similarly independent of the ion-pairing reagent used, although the overall retention times of the peptides increase with increasing hydrophobicity of the anion: phosphate < TFA- < PFPA- < HFBA-. Peptides of differing charge move at differing rates relative to each other depending on concentration of ion-pairing reagents. All four ion-pairing reagents increased peptide retention time with increasing concentration, albeit to different extents, again based on hydrophobicity of the anion, i.e., the more hydrophobic the anion, the greater the increase in peptide retention time at the same reagent concentration. Interestingly, phosphoric acid produced the best separation of the four-peptide mixture (+1 to +4 net charge). In addition, concentrations above 10 mM HFBA produced a reversal of the elution order of the four peptides (+1 < + 2 < + 3 < + 4) compared to the elution order produced by the other three reagents over the entire concentration range (+4 < + 3 < + 2 < + 1).     

Independent highly sensitive characterization of asparagine deamidation and aspartic acid isomerization by sheathless CZE‐ESI‐MS/MS

Amino acids residues are commonly submitted to various physicochemical modifications occurring at physiological pH and temperature. Post‐translational modifications (PTMs) require comprehensive characterization because of their major influence on protein structure and involvement in numerous in vivo process or signaling. Mass spectrometry (MS) has gradually become an analytical tool of choice to characterize PTMs; however, some modifications are still challenging because of sample faint modification levels or difficulty to separate an intact peptide from modified counterparts before their transfer to the ionization source. Here, we report the implementation of capillary zone electrophoresis coupled to electrospray ionization tandem mass spectrometry (CZE‐ESI‐MS/MS) by the intermediate of a sheathless interfacing for independent and highly sensitive characterization of asparagine deamidation (deaN) and aspartic acid isomerization (isoD). CZE selectivity regarding deaN and isoD was studied extensively using different sets of synthetic peptides based on actual tryptic peptides. Results demonstrated CZE ability to separate the unmodified peptide from modified homologous exhibiting deaN, isoD or both independently with a resolution systematically superior to 1.29. Developed CZE‐ESI‐MS/MS method was applied for the characterization of monoclonal antibodies and complex protein mixture. Conserved CZE selectivity could be demonstrated even for complex samples, and foremost results obtained showed that CZE selectivity is similar regardless of the composition of the peptide. Separation of modified peptides prior to the MS analysis allowed to characterize and estimate modification levels of the sample independently for deaN and isoD even for peptides affected by both modifications and, as a consequence, enables to distinguish the formation of l ‐aspartic acid or d ‐aspartic acid generated from deaN. Separation based on peptide modification allowed, as supported by the ESI efficiency provided by CZE‐ESI‐MS/MS properties, and enabled to characterize and estimate studied PTMs with an unprecedented sensitivity and proved the relevance of implementing an electrophoretic driven separation for MS‐based peptide analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

Capillary zone electrophoresis of alpha-helical diastereomeric peptide pairs with anionic ion-pairing reagents

The present study uses an unique capillary electrophoresis (CE) approach, that we have termed ion-interaction capillary zone electrophoresis (II-CZE), for the separation of diastereomeric peptide pairs where a single site in the centre of the non-polar face of an 18-residue amphipathic alpha-helical peptide is substituted by the 19 L- or D-amino acids. Through the addition of perfluorinated acids at very high concentrations (up to 400 mM), such concentration levels not having been used previously in chromatography or CE, to the background electrolyte (pH 2.0), we have been able to achieve baseline resolution of all 19 diastereomeric peptide pairs with an uncoated capillary. Since each diastereomeric peptide pair has the same sequence, identical mass-to-charge ratio and identical intrinsic hydrophobicity, such a separation by CZE has previously been considered theoretically impossible. Excellent resolution was achieved due to maximum advantage being taken of even subtle disruption of peptide structure/conformation (due to the presence of D-amino acids) of the non-polar face of the amphipathic alpha-helix and its interaction with the hydrophobic anionic ion-pairing reagents. In addition, due to the excellent resolution of diastereomeric peptide pairs by this novel CZE approach, we have also been able to separate a mixture of these closely-related alpha-helical peptides.     

Impact of solvent conditions on separation and detection of basic drugs by micro liquid chromatography-mass spectrometry under overloading conditions

In this study the impact of solvent conditions on the performance of μLC/MS for the analysis of basic drugs was investigated. Our aim was to find experimental conditions that enable high-performance chromatographic separation particularly at overloading conditions paired with a minimal loss of mass spectrometric detection sensitivity. A focus was put on the evaluation of the usability of different kinds of acidic modifiers (acetic acid (HOAc), formic acid (FA), methansulfonic acid (CH₃SO₃H), trifluoroacetic acid (TFA), pentafluoropropionic acid (PFPA), and heptafluorobutyric acid (HFBA)). The test mixture consisted of eleven compounds (bunitrolol, caffeine, cocaine, codeine, diazepam, doxepin, haloperidol, 3,4-methylendioxyamphetamine, morphine, nicotine, and zolpidem). Best chromatographic performance was obtained with the perfluorinated acids. Particularly, 0.010–0.050% HFBA (v/v) was found to represent a good compromise in terms of chromatographic performance and mass spectrometric detection sensitivity. Compared to HOAc, on average a 50% reduction of the peak widths was observed. The use of HFBA was particularly advantageous for polar compounds such as nicotine; only with such a hydrophobic ion-pairing reagent chromatographic retention of nicotine was observed. Best mass spectrometric performance was obtained with HOAc and FA. Loss of detection sensitivity induced by HFBA, however, was moderate and ranged from 0 to 40%, which clearly demonstrates that improved chromatographic performance is able to compensate to a large extent the negative effect of reduced ionization efficiency on detection sensitivity. Applications of μLC/MS for the qualitative and quantitative analysis of clinical and forensic toxicological samples are presented.     

Operational variables in high-performance liquid chromatography-electrospray ionization mass spectrometry of peptides and proteins using poly(styrene-divinylbenzene) monoliths

Capillary reversed-phase high-performance liquid chromatography (RP-HPLC) utilizing monolithic poly(styrene-divinylbenzene) columns was optimized for the coupling to electrospray ionization mass spectrometry (ESI-MS) by the application of various temperatures and mobile phase additives during peptide and protein analysis. Peak widths at half height improved significantly upon increasing the temperature and ranged from 2.0 to 5.4 s for peptide and protein separations at 70 degrees. Selectivity of peptide elution was significantly modulated by temperature, whereas the effect on proteins was only minor. A comparison of 0.10% formic acid (FA), 0.050% trifluoroacetic acid (TFA), and 0.050% heptafluorobutyric acid (HFBA) as mobile phase additives revealed that highest chromatographic efficiency but poorest mass spectrometric detectabilities were achieved with HFBA. Clusters of HFBA, water, and acetonitrile were observed in the mass spectra at m/z values >500. Although the signal-to-noise ratios for the individual peptides diverged considerably both in the selected ion chromatograms and extracted mass spectra, the average mass spectrometric detectabilities varied only by a factor of less than 1.7 measured with the different additives. Limits of detection for peptides with 500 nl sample volumes injected onto a 60 mm x 0.20 mm monolithic column were in the 0.2-13 fmol range. In the analysis of hydrophobic membrane proteins, HFBA enabled highest separation selectivity at the cost of lower mass spectral quality. The use of 0.050% TFA as mobile phase additive turned out to be the best compromise between chromatographic and mass spectrometric performance in the analysis of peptides and proteins by RP-HPLC-ESI-MS using monolithic separation columns.     

Cooperative effect in ion pairing of oligolysine with heptafluorobutyric acid in reversed-phase chromatography

The retention behavior of an oligolysine mixture, consisting of two to eight residues, was examined at different concentrations of heptafluorobutyric acid (HFBA) in the mobile phase using a C18 column. A single ion record (SIR) mode of the mass spectrometer produced a distinct retention time for each oligomer component. As the concentration of HFBA increased, the retention time of each oligomer increased. Furthermore, the increase in retention time is chain-length dependent such that, the longer the oligomer chain, the more rapid was the rate that retention time increased. A closed pairing model that presumes an equilibrium between the unpaired state and the paired state with a fixed number of HFBA molecules was used to analyze the retention factor as a function of [HFBA]. Curve fitting gave estimates of the ion-pairing equilibrium constant (K(ip,m)), the distribution constant of paired oligolysine (K(D,ip)), and the number of paired HFBA for each oligolysine (n). The plot of the fraction of paired oligolysine in the mobile phase, estimated from K(ip,m) and n as a function of [HFBA], revealed a cooperative effect. In contrast, an open pairing model that assumes independent pairing of HFBA with each residue failed to describe the observed retention behavior.     

Investigation of perchlorate, phosphate and ion-pairing eluent modifiers for the separation of cephalosporin epimers

The retention behavior of several pairs of 7 alpha- and 7 beta-cephalosporin epimers was investigated using perchlorate, phosphate and ion-pairing eluent modifiers. At pH 2.5, sodium perchlorate, sodium phosphate and sodium pentanesulfonate all provided separation of epimers with free 7-amino groups. When the 7-amino group was blocked, as in cephalexin and cefaclor, sodium perchlorate gave the best separation at pH 2.5. A tetrabutylammonium ion-pairing system at pH 7.0 provided separation of all epimer pairs containing a free carboxylic acid at the 3 position. Hydrophobic, residual silanol and ionic interactions were factors in the retention mechanism of the cephalosporins under the conditions investigated. An ionic interaction of perchlorate with the protonated amine of the cephalosporin was postulated as an explanation of the retention and selectivity effects observed with perchlorate as an eluent modifier.     

Context-dependent effects on the hydrophilicity/hydrophobicity of side-chains during reversed-phase high-performance liquid chromatography: Implications for prediction of peptide retention behaviour

The present study set out to investigate whether observed relative hydrophilicity/hydrophobicity values of positively charged side-chains (with Lys and Arg as representative side-chains) or hydrophobic side-chains (with Ile as the representative side-chain) were context-dependent, i.e., did such measured values vary depending on characteristics of the peptides within which such side-chains are substituted (overall peptide hydrophobicity, number of positive charges) and/or properties of the mobile phase (anionic counterions of varying hydrophobicity and concentration)? Reversed-phase high-performance liquid chromatography (RP-HPLC) was applied to two series of four synthetic peptide analogues (+1, +2, +3 and +4 net charge), the only difference between the two peptide series being the substitution of one hydrophobic Ile residue for a Gly residue, in the presence of anionic ion-pairing reagents of varying hydrophobicity (HCOOH approximately H3PO4 < TFA < PFPA < HFBA) and concentration (2-50 mM). RP-HPLC of these peptide series revealed that the relative hydrophilicity of Lys and Arg side-chains in the peptides increased with peptide hydrophobicity. In addition the relative hydrophobicity of Ile decreased dramatically with an increase in the number of positive charges in the peptide, this hydrophobicity decrease being of greater magnitude as the hydrophobicity of the anionic ion-pairing reagent increased. These results have significant implications in the prediction of peptide retention times for proteomic applications.     

Effect of cyclization of N-terminal glutamine and carbamidomethyl-cysteine (residues) on the chromatographic behavior of peptides in reversed-phase chromatography

N-terminal loss of ammonia is a typical peptide modification chemical artifact observed in bottom-up proteomics experiments. It occurs both in vivo for N-terminal glutamine and in vitro following enzymatic cleavage for both N-terminal glutamine and cysteine alkylated with iodoacetamide. In addition to a mass change of −17.03 Da, modified peptides exhibit increased chromatographic retention in reversed-phase (RP) HPLC systems. The magnitude of this increase varies significantly depending on the peptide sequence and the chromatographic condition used. We have monitored these changes for extensive sets (more than 200 each) of tryptic Gln and Cys N-terminated species. Peptides were separated on 100 Å pore size C18 phases using identical acetonitrile gradient slopes with 3 different eluent compositions: 0.1% trifluoroacetic acid; 0.1% formic acid and 20 mM ammonium formate at pH 10 as ion-pairing modifiers. The observed effect of this modification on RP retention is the product of increased intrinsic hydrophobicity of the modified N-terminal residue, lowering or removing the effect of ion-pairing formation on the hydrophobicity of adjacent residues at acidic pHs; and possibly the increased formation of amphipathic helical structures when the positive charge is removed. Larger retention shifts were observed for Cys terminated peptides compared to Gln, and for smaller peptides. Also the size of the retention increase depends on the eluent conditions: pH 10 ? trifluoroacetic acid < formic acid. Different approaches for incorporation these findings in the peptide retention prediction models are discussed.     

Comparison of retention behavior of oligolysine and oligoarginine in ion-pairing chromatography using heptafluorobutyric acid

This paper describes the retention behavior of oligolysine and oligoarginine peptides of different lengths as a function of heptafluorobutyric acid (HFBA) concentration in ion-pairing reversed-phase chromatography in isocratic elution. A mixture of oligolysine and a mixture of oligoarginine with number of amino acid residues (dp) from two to eight were conveniently prepared by one-pot protease-catalyzed synthesis. Analysis of the logarithm of the retention factor k as a function of [HFBA] for each oligopeptide component, using a closed pairing model, provided values for (1) number (n) of paired HFBA anions per peptide molecule, (2) equilibrium constant (K _ip,m) for ion pairing between oligopeptides and HFBA anions, and (3) product of the phase ratio and the distribution constant of the paired oligopeptide between the mobile and stationary phases (βK _d,ip). We found that βK _d,ip of oligoarginine is larger compared with oligolysine having the same dp. A linear relationship was obtained for ln βK _d,ip as a function of n?+?g?·?dp. By optimizing constant g separately for oligolysine and oligoarginine, we determined that g is larger for oligoarginine, in agreement with the higher hydrophobicity of arginine residues. Plotting the fraction of paired oligoarginine and oligolysine as a function of [HFBA] shows that the cooperative effect in forming ion pairs is greater for oligoarginine than oligolysine.

Peptide mapping with mobile phases of intermediate pH value using capillary reversed-phase high-performance liquid chromatography/electrospray ionisation tandem mass spectrometry

This investigation describes the separation of tryptic peptides by capillary reversed-phase high-performance liquid chromatography (RP-HPLC) with eluents in the intermediate pH range, followed by in-line electrospray ionisation tandem mass spectrometry (ESI-MS/MS) analysis. For these purposes, gradient elution procedures with an aqueous eluent containing 20 mM ammonium formate, and an increasing content of acetonitrile or methanol, were employed. Compared to the analysis of the same tryptic peptides under low-pH conditions with an ion-pairing reagent, the increase in the pH with the 20 mM ammonium formate mobile phase led to significant changes in both peptide retention to the reversed-phase column and the collision-induced dissociation at the MS/MS stage as a consequence of the changes in the physico-chemical properties of these peptides, such as their overall charge, polarity and relative hydrophobicity. Thus, improved selectivity for the peptide separation and favourable tandem mass spectrometry analysis could be obtained with eluents in this intermediate pH range. The number of tryptic peptides identified by the new approach for the proteins investigated were significantly higher than that obtained by the conventional low-pH methods. Moreover, analysis of protein digests at very low concentrations was also performed under both acidic and intermediate pH conditions and similar improvements in selectivity and MS/MS detection limits were observed, i.e. identification of more distinct peptides and higher sequence coverage of the protein was obtained when eluents of intermediate pH were employed. This study therefore highlights the potential of conducting peptide mapping in the intermediate pH range to achieve more reliable and sensitive protein identifications with capillary RP-HPLC–ESI-MS/MS.     

Observation of an unusually facile fragmentation pathway of gas-phase peptide ions: a study on the gas-phase fragmentation mechanism and energetics of tryptic peptides modified with 4-sulfophenyl isothiocyanate (SPITC) and 4-chlorosulfophenyl isocyanate (SPC) and their 18-crown-6 complexes

Various peptide modifications have been explored recently to facilitate the acquisition of sequence information. N-terminal sulfonation is an interesting modification because it allows unambiguous de novo sequencing of peptides, especially in conjunction with MALDI-PSD-TOF analysis; such modified peptide ions undergo fragmentation at energies lower than those required conventionally for unmodified peptide ions. In this study, we systematically investigated the fragmentation mechanisms of N-terminal sulfonated peptide ions prepared using two different N-terminal sulfonation reagents: 4-sulfophenyl isothiocyanate (SPITC) and 4-chlorosulfophenyl isocyanate (SPC). Collision-induced dissociation (CID) of the SPC-modified peptide ions produced a set of y-series ions that were more evenly distributed relative to those observed for the SPITC-modified peptides; y(n-1) ion peaks were consistently and significantly larger than the signals of the other y-ions. We experimentally investigated the differences between the dissociation energies of the SPITC- and SPC-modified peptide ions by comparing the MS/MS spectra of the complexes formed between the crown ether 18-crown-6 (CE) and the modified peptides. Upon CID, the complexes formed between 18-crown-6 ether and the protonated amino groups of C-terminal lysine residues underwent either peptide backbone fragmentation or complex dissociation. Although the crown ether complexes of the unmodified ([M + CE + 2H]2+) and SPC-modified ([M* + CE + 2H]2+) peptides underwent predominantly noncovalent complex dissociation upon CID, the low-energy dissociations of the crown ether complexes of the SPITC-modified peptides ([M' + CE + 2H]2+) unexpectedly resulted in peptide backbone fragmentations, along with a degree of complex dissociation. We performed quantum mechanical calculations to address the energetics of fragmentations observed for the modified peptides.     

缓冲盐类型和离子对试剂非对离子对强离解酸性化合物离子对反相液相色谱保留行为的影响

在离子对反相液相色谱(IP-RPLC)分析中,溶质保留受对离子(counter ion)的影响比较受人关注,但鲜有研究流动相中缓冲盐类型和离子对试剂中非对离子(non-counter ion)对溶质保留行为的影响。鉴于此,该文以14种磺酸化合物为研究对象,甲醇为有机调节剂,分别考察了3种缓冲盐体系(磷酸二氢铵、氯化铵和乙酸铵)和5种离子对试剂体系(四丁基溴化铵、四丁基磷酸二氢铵、四丁基硫酸氢铵、四丁基硝酸铵和四丁基乙酸铵)下强离解酸性化合物的IP-RPLC保留行为,通过比较不同流动相条件下得到的溶质log k_w(100%水相作流动相时的保留因子)、S(线型溶剂强度模型线性回归得到的常数),以及CHI(色谱疏水指数,log k_w/S),寻找保留行为规律。研究表明,流动相中的缓冲盐类型和离子对试剂非对离子均会影响化合物的log k_w和S值,所有化合物在氯化铵缓冲盐体系下具有最大的log k_w值。相对于无机阴离子,离子对试剂中弱离解性有机阴离子(乙酸根)的存在有利于增加磺酸化合物的S值。通过对比不同条件下的保留行为,推测磺酸化合物的IP-RPLC保留机理中同时存在着离子对模型和动态离子交换模型。与log k_w和S值不同,化合物的CHI值受缓冲盐类型以及离子对试剂非对离子的影响较弱。此外,研究发现化合物的表观正辛醇/水分配系数(log D)与log k_w、S、CHI之间均具有良好的线性相关性。不同缓冲溶液和不同离子对试剂非对离子条件下获得的log k_w和S值存在着一定的差异,而CHI值相对稳定,因此,CHI更适用于IP-RPLC中定量结构-保留行为关系模型的建立。     

High-performance liquid chromatography of selenium compounds utilizing perfluorinated carboxylic acid ion-pairing agents and inductively coupled plasma and electrospray ionization mass spectrometric detection

Increasing speciation demands in clinical chemistry, toxicology and nutrition have made the determination of the total elements in a sample inadequate; the amount of an element and the chemical forms in which it is present need to be known. Inductively coupled plasma mass spectrometry (ICP-MS) was used after high-performance liquid chromatographic (HPLC) separation, as was electrospray ionization mass spectrometry (ESI-MS). The effect of variation of the number of carbon atoms in perfluorinated carboxylic acids used as ion-pairing agents for the separation of selenium compounds was examined. Trifluoroacetic acid (0.1%), pentafluoropropanoic acid (0.1%) or heptafluorobutanoic acid (0.1%; HFBA) were alternatively used as additives to methanol-water (1:99, v/v) solutions as mobile phases. Reversed-phase HPLC-ICP-MS with 0.1% HFBA in the mobile phase allowed more than 20 selenium compounds to be separated in 70 min in an isocratic elution mode; the separation of natural selenium-enriched sample extracts was examined and explained. The pH of the 0.1% HFBA solution was modified with hydrochloric acid or ammonia and the pH of the sample extracts before injection was modified in order to overcome unwanted double peak formation in the chromatograms of sample extracts. Oxidations of standard gamma-glutamyl-Se-methylselenocysteine and Se-methylselenocysteine were carried out using 30% H2O2 solution and identifications of selenium-containing oxidation products were made using HPLC-ICP-MS and HPLC-ESI-MS. The principal organic oxidation product in both cases was methaneseleninic acid (MeSeO2H).     

Ion-pair Reversed-phase×Low-pH Reversed-phase Two-dimensional Liquid Chromatography for In-depth Proteomic Profiling

High-resolution liquid chromatography separation is essential to in-depth proteomic profiling of complex biological samples. Herein, we established an ion-pair reversed-phase×reversed-phase two-dimensional liquid chromatography (IPRP×RP 2DLC) strategy for comprehensive proteomic analysis. Both RPLC separation dimensions were performed at low pH, with trifluoroacetic acid(TFA) and formic acid(FA) as mobile phase addictive, respectively. As the good separation resolution offered by ion-pairing effect of TFA, the fractionation efficiency was greatly improved with 74.0% peptides identified in just one fraction. Comparing with conventional high pH RP fractionation, the overall separation rate of IPRP was about 1.6 times that of high-pH RP, which increased the number of identified peptides by 21%. Further, 2169 proteins and 8540 peptides were confidently identified from crude serum sample by our IPRP×RP 2DLC strategy, exhibiting great potential in clinical proteomics in the future.     

Capillary electrophoresis of synthetic peptide standards varying in charge and hydrophobicity

A mixture of eight structurally closely related synthetic peptides as capillary electrophoretic (CE) standards is introduced. The almost identical mass-to-charge ratio of the standards, coupled with their random-coil (i.e., no secondary structure) nature, offer a potent analytical test for CE to separate peptides varying only subtly in hydrophobicity. Parameters varied to effect a separation included background electrolyte concentration, temperature, applied voltage in capillary zone electrophoresis (CZE in uncoated capillaries), as well as the introduction of hydrophobic mechanisms to the separation either through the use of micelles or C8-coated capillaries. Our step-by-step approach culminated in an optimized combination of a CZE mechanism for separation of differently charged peptide groups (based on common mass-to-charge ratio) and an ion-pairing mechanism (effecting a separation within each group of identically charged peptides), which we have termed ion-interaction CZE or II-CZE. The study clearly shows how the peptide standards allow an excellent assessment of the resolving power of CE.     

Capillary electrophoresis of cationic random coil peptide standards: effect of anionic ion-pairing reagents and comparison with reversed-phase chromatography

The present study compares a charge/hydrophobicity capillary electrophoresis (CE) approach to reversed-phase high-performance liquid chromatography (RP-HPLC) for the separation of three series of four synthetic, random coil peptide standards. Each series has peptides of the same positive charge (+1, +2 and +3 series) and length but differing in hydrophobicity. Complete resolution of the 12 peptides was achieved via a novel CE approach: a capillary zone electrophoresis (CZE) mode effected a separation of identically charged peptides; within each charged group of peptides, the addition of perfluorinated acid anionic ion-pairing reagents allowed resolution of the peptides through a mechanism based on peptide hydrophobicity which we have termed ioninteraction (II)-CZE. The peak capacity and peptide resolution of this CE approach was superior to that of RP-HPLC and stresses an important role for CE for peptide/proteomic applications.     

The relative influence of phosphorylation and methylation on responsiveness of peptides to MALDI and ESI mass spectrometry

Qualitative and quantitative analysis of post‐translational protein modifications by mass spectrometry is often hampered by changes in the ionization/detection efficiencies caused by amino acid modifications. This paper reports a comprehensive study of the influence of phosphorylation and methylation on the responsiveness of peptides to matrix‐assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI) mass spectrometry. Using well‐characterized synthetic peptide mixtures consisting of modified peptides and their unmodified analogs, relative ionization/detection efficiencies of phosphorylated, monomethylated, and dimethylated peptides were determined. Our results clearly confirm that the ion yields are generally lower and the signal intensities are reduced with phosphopeptides than with their nonphosphorylated analogs and that this has to be taken into account in MALDI and ESI mass spectrometry. However, the average reduction of ion yield caused by phosphorylation is more pronounced with MALDI than with ESI. The unpredictable impact of phosphorylation does not depend on the hydrophobicity and net charge of the peptide, indicating that reliable quantification of phosphorylation by mass spectrometry requires the use of internal standards. In contrast to phosphorylation, mono‐ and dimethylated peptides frequently exhibit increased signal intensities in MALDI mass spectrometry (MALDI‐MS). Despite minor matrix‐dependent variability, MALDI methods are well suited for the sensitive detection of dimethylated arginine and lysine peptides. Mono‐ and dimethylation of the arginine guanidino group did not significantly influence the ionization efficiency of peptides in ESI‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

The Use of Perfluorinated Carboxylic Acids in the Reversed-Phase HPLC of Peptides

Abstract

The relative effectiveness of trifluoroacetic acid (TFA), pentafluoropropanoic acid (PFPA), heptafluorobutyric acid (HFBA) and undecafluorocaproic acid (UFCA) as hydrophobic counter-ions in the reversedphase high performance liquid chromatography (RP-HPLC) of peptides was assessed. Four solvent systems were compared each containing 0.01M of a perfluorocarboxylic acid throughout. Twelve standard peptides and proteins were loaded onto the RP-HPLC column which was eluted with a linear gradient of 20-58.4% aqueous acetonitrile over 90 minutes. The retention times of the peptide standards were different in each solvent system. In progressing from TFA to PFPA, HFBA and UFCA all the peptides showed greater retention times. However, the effect was most marked with peptides having the greatest number of basic groups. By exploiting this behaviour a different type of chromatography can be introduced into the RP-HPLC purification of peptides. For instance, column fractions obtained from the use of the TFA solvent system can be re-chromatographed in a solvent system containing HFBA. It is possible by this procedure to purify naturally occurring peptides on the basis of their overall positive charges. At 0.01M each acid solution is sufficiently U.V. transparent to permit monitoring of column effluents at 210 nm. TFA, PFPA, HFBA and UFCA solvent systems are also completely volatile and this property facilitates the bioassay, radioimmunoassay and amino acid analysis of column fractions.