共查询到20条相似文献,搜索用时 187 毫秒
1.
在分析面阵CCD图像传感器结构和驱动时序基础上,针对高分辨率高灵敏度ICX694ALG大面阵CCD图像传感器 ,研究其驱动时序发生器。以现场可编程门阵列 ( FPGA) 作为硬件平台 ,通过Verilog HDL硬件描述语言对该驱动时序发生器进行了硬件描述,采用ISE软件进行功能仿真,并针对XILINX公司的可编程逻辑器件XC3S1000进行了硬件适配。仿真测试表明,FPGA驱动时序发生器能够满足高分辨高灵敏ICX694ALG大面阵CCD图像传感器驱动要求,达到了设计要求。 相似文献
2.
基于CPLD的空间面阵CCD相机驱动时序发生器的设计与硬件实现 总被引:13,自引:11,他引:2
在分析e2v公司的CCD47-20 Backthinned NIMO型CCD器件驱动时序关系的基础上, 设计了可调帧频和曝光时间的空间面阵CCD相机驱动时序发生器及其硬件电路.选用可编程逻辑器件作为硬件设计载体,使用VHDL语言对驱动时序发生器进行了硬件描述.针对ALTERA公司的EPM9400LC84-15对设计进行了RTL级仿真及配置,完成了时序发生器的硬件电路.硬件实验结果表明,所研制的驱动时序发生器不仅可以满足空间CCD相机的驱动要求,而且还可以调节帧频和曝光时间. 相似文献
3.
高速CCD摄像机驱动时序发生器的设计及基于CPLD技术的实现 总被引:9,自引:0,他引:9
在分析DALSA公司的IA D1型高速CCD器件驱动时序关系的基础上 ,设计了可调曝光时间的高速摄像机驱动时序发生器。选用复杂可编程逻辑器件 (CPLD)作为硬件设计平台 ,使用VHDL语言对驱动时序发生器进行了硬件描述 ,采用EDA软件对所设计的驱动时序发生器进行了功能仿真 ,针对Lattice公司的可编程逻辑器件ISPLSI5 2 5 6进行适配。系统测试结果表明 ,所研制的驱动时序发生器不仅可以满足高速CCD摄像机的驱动要求 ,而且还能够调节其曝光时间 相似文献
4.
在分析e2v公司的CCD47—20 Backthinned NIMO型CCD器件驱动时序关系的基础上,结合空间面阵CCD相机电子系统的总体要求,完成了基于FPGA的驱动时序发生器与下位机的一体化设计。选用FPGA器件作为硬件设计载体,使用VHDL语言对一体化的时序与控制通信系统进行了硬件描述。针对ALTERA公司的FPGA器件EP1C6Q240C8对设计进行了RTL级仿真及配置,完成了一体化系统的硬件电路。硬件实验结果表明,所研制的基于FPGA的一体化的时序与控制通信系统不仅可以满足CCD芯片和视频处理的时序要求,还可以与CCD相机上位机进行可靠的串行通信,监测和控制相机的工作状态. 相似文献
5.
基于CPLD的可选输出CCD驱动时序设计 总被引:23,自引:7,他引:16
在分析了CCD器件驱动时序关系的基础上,设计了可选输出的驱动时序发生器.作为卫星上的有效载荷,CCD成像系统可以根据入射能量的多少及探测分辨率的需求,以单像元或像元二合一方式输出.选用复杂可编程逻辑器件(CPLD)作为硬件设计平台,使用VHDL语言对驱动时序发生器进行了硬件描述,采用Maxplus Ⅱ对所设计的驱动时序发生器进行了仿真,针对Altera公司的可编程逻辑器件EPM7128SLC84-7进行适配.系统测试结果表明,所研制的驱动时序发生器可以满足高速CCD成像仪的驱动要求. 相似文献
6.
7.
8.
9.
基于FPGA的一种长线阵CCD驱动时序电路设计 总被引:1,自引:0,他引:1
驱动时序电路的设计是CCD应用的关键技术,在分析ATMEL公司的TH7834C型长线阵CCD器件驱动时序关系的基础上,设计了TH7834C的驱动时序电路。选用现场可编程门阵列(FPGA)作为硬件设计平台,使用VHDL语言对驱动时序电路进行了硬件描述,采用EDA软件对所设计的驱动时序进行了功能仿真,针对ALTERA公司的现场可编程门阵列EPF10K30RC240-3进行了适配。工程实践结果表明,所设计的驱动时序电路不仅可以满足TH7834C型CCD的驱动要求,而且该驱动电路结构简单、功耗小、成本低、抗干扰能力强,具有较高的实用价值,适用于其它型号的CCD。 相似文献
10.
介绍了行间转移面阵CCD芯片KAI-1010M的内部结构、工作时序和驱动系统,采用将存储区内相同像素在不同曝光时间的感应电荷叠加,实现了行间转移面阵CCD的时间延时和积分工作方式;采用Fast Dump Gate(FDG)功能快速清除电荷而只保留3行CCD信号以提高帧频,克服面阵帧周期长的缺点,实现三线阵工作方式,最终实现了三线阵的时间延时和积分成像工作方式.实验结果表明,此实现方式是可行的,最大帧频可达54.3 fps,控制曝光时间的方式灵活,而且能使CCD输出信号的幅度成倍的增加. 相似文献
11.
12.
We study the relation between the centro-affine geometry of star-shaped planar curves and the projective geometry of parametrized maps into RP1. We show that projectivization induces a map between differential invariants and a bi-Poisson map between Hamiltonian structures. We also show that a Hamiltonian evolution equation for closed star-shaped planar curves, discovered by Pinkall, has the Schwarzian KdV equation as its projectivization. (For both flows, the curvature evolves by the KdV equation.) Using algebro-geometric methods and the relation of group-based moving frames to AKNS-type representations, we construct examples of closed solutions of Pinkall’s flow associated with periodic finite-gap KdV potentials. 相似文献
13.
A. H. Taub 《General Relativity and Gravitation》1979,10(12):1009-1009
14.
Ugeda MM Fernández-Torre D Brihuega I Pou P Martínez-Galera AJ Pérez R Gómez-Rodríguez JM 《Physical review letters》2011,107(11):116803
Understanding the coupling of graphene with its local environment is critical to be able to integrate it in tomorrow's electronic devices. Here we show how the presence of a metallic substrate affects the properties of an atomically tailored graphene layer. We have deliberately introduced single carbon vacancies on a graphene monolayer grown on a Pt(111) surface and investigated its impact in the electronic, structural, and magnetic properties of the graphene layer. Our low temperature scanning tunneling microscopy studies, complemented by density functional theory, show the existence of a broad electronic resonance above the Fermi energy associated with the vacancies. Vacancy sites become reactive leading to an increase of the coupling between the graphene layer and the metal substrate at these points; this gives rise to a rapid decay of the localized state and the quenching of the magnetic moment associated with carbon vacancies in freestanding graphene layers. 相似文献
15.
基于密度泛函理论的第一性原理计算方法,研究了Pt原子在五边形石墨烯(PG)上的吸附与动力学行为.研究结果表明,单个Pt原子在PG上虽然具有较大的吸附能及较高的扩散势垒,却不能够在衬底形成均匀分散的单原子.这是因为,随Pt原子数增加,Ptn(n=1, 2, 3)在PG上的平均结合能也逐渐增加,更倾向于形成团簇,该发现有效否定了之前的报道称Pt能在PG上形成稳定的单原子催化剂这一结论(Phys. Chem. Chem. Phys. 21, 12201 (2019)).基于此,我们考虑对PG施加双轴应变,随着拉伸应力增加,Pt金属原子间的平均结合能逐渐降低,当拉伸应变施加至12%左右时,单个Pt在衬底上的结合能与Pt2在衬底上的平均结合能相等,从而实现PG上均匀分散的Pt单原子催化剂.该结果对五边形石墨烯基材料应变调控实现单原子催化剂提供理论借鉴. 相似文献
16.
17.
18.
H. Lenske 《Progress in Particle and Nuclear Physics》2008,61(1):205-211
The coupled-channel Giessen Model is used to investigate meson production on the nucleon simultaneously in reactions with hadrons and the photon. The essential aspects of the model are discussed. Results for strangeness producing KΛ reactions on the proton and eta photoproduction on the proton and the neutron, respectively, are presented. A resonance model is used to explore the production of hypernuclei in proton and photon induced reactions. 相似文献
19.
András Telcs 《Journal of statistical physics》1990,60(5-6):801-807
We consider random walks on polynomially growing graphs for which the resistances are also polynomially growing. In this setting we can show the same relation that was found earlier but that needed more complex conditions. The diffusion speed is determined by the geometric and resistance properties of the graph. 相似文献