Catalytic oxidation of methane over Pd/Co3O4

The catalytic activity of Pd/Co₃O₄ toward methane oxidation has been examined in this study as a function of Pd loading, reaction temperature, space velocity and methane concentration in the reaction gas mixture. The bare oxide is quite active achieving a 100% methane conversion at 480°C under the reaction conditions used. The catalyst with the highest Pd loading tested of 10 wt.% yields the best activity curve, but the 5 wt.% Pd/Co₃O₄ catalyst performs nearly as well. Complete conversion for this catalyst is attained at 300°C and the activity remains stable over a 90-min test period.     

Catalytic oxidation of carbon monoxide over Au/Fe2O3 preparations

Low temperature catalytic oxidation of carbon monoxide has been studied over Au/Fe₂O₃. On the coprecipitated samples the catalytic activity shows a maximum at a gold content of about 5%. Calcination of Au/Fe₂O₃ decreases the catalytic activity and the stability. The catalytic activity measured is the highest ever reported in the literature on Au/Fe₂O₃ preparations.     

CO oxidation over Co3O4/SiO2 catalysts: Effects of porous structure of silica and catalyst calcination temperature

The catalytic performances of Co3O4/SiO2 catalysts prepared by incipient wetness impregnation for CO oxidation were investigated using three kinds of silica as carriers with different pore sizes of 7.7, 14.0 and 27.0 nm. The effects of calcination temperature on the catalyst surface and micro structure properties as well as catalytic performance for the oxidation of carbon monoxide were also studied. All catalysts were characterized by N2 adsorption-desorption, XRD, XPS, FTIR, H2-TPR and O2-TPD. It was found that the properties and crystal size of cobalt-containing species strongly depended on the pore size of silica carrier. While the silica pore size increased from 7.7 to 27.0 nm, the Co3O4 crystal size increased from 8.5 to 13.5 nm. Moreover, it was demonstrated that if the spinel crystal structure of Co3O4 was obtained at a calcination temperature as low as 150 ℃, the catalyst sample would have a high Co3O4 surface dispersion and a increase of surface active species, and thus exhibit a high activity for the oxidation of carbon monoxide.     

Kinetics of low temperature CO oxidation over Pt/SnO2 catalyst

In a CO−O₂ stoichiometric mixture, the kinetic parameters, reaction order, rate constant and activation energy of CO oxidation over a Pt/SnO₂ catalyst have been measured using a fixed bed flow reactor near 0°C. The results show that it is a first-order reaction. The activation energy of CO oxidation over Pt/SnO₂ prepared with SnO₂ calcined at 300°C was approximately 21 kJ/mol. The activation energy of CO oxidation over Pt/SnO₂ changed slowly with SnO₂ calcination temperature above 400°C, and reached approximately 45 kJ/mol.     

Low-temperature and stable CO oxidation of Co3O4/TiO2 monolithic catalysts

Highly efficient Co₃O₄/TiO₂ monolithic catalysts with enhanced stability were in-situ grown on Ti mesh for CO oxidation,which could completely oxidize CO at 120℃.The comprehensive catalytic performance is competitive to some noble metal catalysts and conventional Co₃O₄ powder catalysts,which holds great potential toward industrial applications.Meanwhile,the in-situ synthesis strategy of Co₃O₄/TiO₂ monolithic catalysts on flexible mesh substrate in this work can be extended to the development of a variety of oxide-based monolithic catalysts towards diverse catalysis applications.     

Co3O4/CeO2 CO氧化的原位红外光谱研究

采用沉淀氧化法制备了Co₃O₄/CeO₂催化剂。分别在干、湿条件下进行了一氧化碳氧化反应研究。运用FT-IR表征手段,在钴铈复合氧化物上进行了CO吸附及CO/O₂共吸附研究。结果表明,与纯的Co₃O₄样品相比,Co₃O₄/CeO₂具有明显的抗湿气能力。Co₃O₄/CeO₂催化剂在进行CO氧化时,表面形成了类碳酸盐物种。当环境温度低于453 K时,催化剂上类碳酸盐的生成与形成类碳酸盐物种后受热分解存在着动态平衡。当环境温度高于493 K,催化剂上生成的类碳酸盐物全部受热分解。氧化铈的加入提高了催化剂的抗湿气性能。较小粒径的Co₃O₄与CeO₂产生的强相互作用可使CeO₂向Co₃O₄提供氧,因而间接提供了CO氧化需要的氧。     

Carbon monoxide oxidation on Pt/TiO2 sol-gel catalysts

Comparative results (specific area, metallic dispersion, and activity in the carbon monoxide oxidation) on sol-gel and impregnated Pt/TiO₂ catalysts are presented. In order to explain the important differences between the two preparations, among them high resistivity of sol-gel catalyst to sintering, the formation of anchored and/or partially buried particles into the support is proposed.     

Influence of pretreatment conditions on low-temperature CO oxidation over Au/MOx/Al2O3 catalysts

Composite oxide MO_x/Al₂O₃ supported gold catalysts for low-temperature CO oxidation were prepared and investigated. The presence of transition metal oxide was proved to be beneficial to the improvement of catalytic performance of Au/Al₂O₃ catalysts for low-temperature CO oxidation. Furthermore, the influence of various pretreatment conditions on Au/MO_x/Al₂O₃ catalysts was studied carefully. The image of TEM showed that gold catalyst with small gold particles only in the form of a fine dispersion exhibited highly catalytic activity. The XPS, Fourier transform infrared (FTIR) spectroscopy characterization results of Au/FeO_x/Al₂O₃ catalyst showed that gold catalysts having partially oxidized gold species have the best catalytic performance. One possible pathway for CO oxidation on Au/FeO_x/Al₂O₃ catalyst is that the CO adsorbed on gold particles reacts with adsorbed oxygen, which is possible to occur on oxygen vacancies on the support or at the metal–support interface.     

PdCl2-CuCl2/Al2O3催化剂低温催化CO氧化的失活机理

采用X射线衍射、N₂吸-脱附、X射线光电子能谱分析、氢气-程序升温还原和原位红外漫反射等方法对新鲜和失活的PdCl₂-CuCl₂/Al₂O₃低温催化CO氧化催化剂进行表征,研究了高相对湿度(100%)下催化剂的失活机理.结果表明,催化剂表面沉积的水使得活性铜物种容易从催化剂表面向载体孔道内部迁移,由于Pd、Cu相互作用弱化从而减弱了Pd与Cu物种间的相互作用,使得催化剂的氧化还原性能受到影响,抑制了Pd⁰再氧化为Pd²⁺的过程,从而因CO氧化反应中催化剂氧化还原循环受阻而导致失活.     

Characterization of PdO/Ce0.8Y0.2O1.9 catalysts for carbon monoxide and methane oxidation

The Ce_0.8Y_0.2O_1.9 solid solution was prepared by nitrate sol–gel method, and a series of catalysts with different PdO loading were prepared using impregnation method. These catalysts were characterized by XRD, Raman, CO-TPR, CO₂- and O₂-TPD techniques. The PdO is highly dispersed on the surface of the solid solution when the loading is lower than 0.5 wt.%. As PdO loading increases to 2 wt.%, it begins to form the crystalline structure. CO₂-TPD profiles show that the CO adsorbed on highly dispersed PdO is more easily oxidized to CO₂ than that adsorbed on crystalline structure and O₂-TPD results indicate that it is more difficult to decompose for highly dispersed PdO than that for crystalline structure. CO-TPR profiles show that the highly dispersed PdO is easily reduced. Catalytic activities of these catalysts for CO and CH₄ oxidation indicate that both the highly dispersed and crystalline PdO are the active site for CO oxidation, while the crystalline structure is the active site for CH₄ oxidation.     

不同形貌Co3O4和NiO的可控合成及光学性质

采用沉淀法,选择不同的钴盐和镍盐,以草酸为沉淀剂,磷酸三钠作为形貌导向剂,分别合成了具有特殊形貌的四氧化三钴和氧化镍。并对样品进行了微观结构、形貌和光学性质的表征。结果表明:在磷酸三钠的辅助下,四氧化三钴的晶体生长沿一维方向发展,氧化镍的晶体生长沿二维方向发展。紫外光谱测试表明,磷酸三钠参与下得到的四氧化三钴和氧化镍的禁带宽均增加。     

Selective oxidation of octadecan-1-ol to octadecanoic acid over Co3O4/SiO2 catalysts

Factors (reaction temperature, reaction time, flow rate of oxygen, amount of catalyst, etc.) influencing the catalytic properties of Co₃O₄/SiO₂catalyst in the oxidation octadecan-1-ol to octadecanoic acid were investigated. The catalysts were characterized by means of XRD, FT-IR and N₂-adsorption. The experimental results indicate that under the optimal condition the selectivity to octadecanoic acid reached 97.5 % over 5 % Co₃O₄/SiO₂ catalyst.This revised version was published online in December 2005 with corrections to the Cover Date.     

Preferential oxidation of CO in H2 over Co3O4-CeO2 catalysts

The impact of nanoscience on heterogeneous catalysis is discussed with the emphasis on enantioselective hydrogenation. Experimental data on liquid-phase hydrogenation reactions of 1-phenyl-1,2-propanedione are presented, demonstrating that the size of nanoparticles should account for the explanation of activity, regio- and enantioselectivity.     

甲苯和一氧化碳氧化用介孔LaFeO3催化剂（英文）

以KIT-6和二氧化硅纳米球为硬模板制备了比表面积分别为138和65 m2/g的正交相蠕虫状介孔LaFeO3催化剂LFO-1和LFO-2.在空速为20000 mL/(g劒h)的条件下,LFO-1样品显示出最高的催化活性:对于CO氧化反应,T50%和T90%分别为155和180 oC;对于甲苯氧化反应,T50%和T90%分别为200和253 oC.该样品优异的催化性能与它具有较大的比表面积、较高的氧吸附物种浓度、较好的低温还原性以及良好的蠕虫状介孔结构有关.     

Catalytic carbon monoxide oxidation over CuO/CeO2 composite catalysts

Summary CeO₂ nanoparticles were prepared by thermal decomposition of cerous nitrate and then used as supports for CuO/CeO₂ catalysts prepared via the impregnation method. The samples were characterized by XRD, HRTEM, H₂-TPR and XPS. The catalytic properties of the catalysts for low-temperature CO oxidation were studied by using a microreactor-GC system.     

Influence of promoters on the performance of Au/MnOx and Pt/SnOx/SiO2 low-temperature CO oxidation catalysts

The influence of promoters on Pt/SnO_x/SiO₂ and Au/MnO_x low-temperature CO oxidation catalysts has been investigated under stoichiometric reaction conditions with no CO₂ added to the feed gas. The performance of Pt/SnO_x/SiO₂ catalysts is improved significantly by the addition of 1 wt.% Fe but reduced by the addition of 5 wt.%Fe, 1 wt.% Sb, 5 wt.% Sb, 1 wt.% As, 5 wt.%As and 1.8 wt.% P. The performance of Au/MnO_x is improved significantly by the addition of 1 at.% Ce but reduced by the addition of 1 at.% Co. For the catalysts and conditions examined, the Au/MnO_x catalysts are superior to the Pt/SnO_x/SiO₂ catalysts with respect to both activity and decay characteristics.     

Effect of the calcination temperature on the properties of Fe2O3/SiO2 catalysts for oxidation of hydrogen sulfide

The effect of the calcination temperature on the properties of supported iron oxide catalysts for hydrogen sulfide oxidation prepared by impregnation of silica with iron(III) nitrate has been studied. An increase in the calcination temperature was found to diminish the catalytic activity of the Fe₂O₃/SiO₂ catalysts in hydrogen sulfide oxidation. This behavior can be explained by the agglomeration of iron oxide particles and by a decrease in the surface concentration of active sites. It has been shown that an increase in the calcination temperature makes the catalyst more stable towards the sulfidation of the active component (Fe₂O₃) to the iron disulfide phase.     

纯相和镍取代的Co_3O_4尖晶石催化剂用于N_2O直接分解(英文)

A series of NixCo1-xCo2O4(0 ≤ x ≤ 1) spinel catalysts were prepared by the co-precipitation method and used for direct N2O decomposition. The decomposition pathway of the parent precipitates was characterized by thermal analysis. The catalysts were calcined at 500 °C for 3 h and characterized by powder X-ray diffraction, Fourier transform infrared, and N2 adsorption-desorption. Nickel cobaltite spinel was formed in the solid state reaction between NiO and Co3O4. The N2O decomposition measurement revealed significant increase in the activity of Co3O4 spinel oxide catalyst with the partial replacement of Co2+ by Ni2+. The activity of this series of catalysts was controlled by the degree of Co2+ substitution by Ni2+, spinel crystallite size, catalyst surface area, presence of residual K+, and calcination temperature.     

硫中毒对Co3O4/CeO2复合氧化物上炭黑催化燃烧的影响

采用共沉淀法制备了CeO₂,Co₃O₄和一系列Co₃O₄/CeO₂复合氧化物催化剂,在400 ℃下含SO₂的氧化气氛中对催化剂进行了硫中毒处理,通过原位红外光谱、X射线衍射、程序升温脱附和X射线光电子能谱对新鲜和硫中毒的样品进行了表征. 结果表明,所有测试的硫中毒样品上均形成了硫酸盐,CeO₂上累积的硫酸盐明显比Co₃O₄上的多,Co₃O₄/CeO₂复合氧化物在硫中毒过程中形成了硫酸钴和硫酸铈. 对新鲜和硫化样品在NO/O₂气氛下进行了催化炭黑燃烧实验,发现Co₃O₄/CeO₂复合氧化物的活性和抗硫性能优于CeO₂,但抗硫性能低于Co₃O₄.     

Combination of CO2 reforming and partial oxidation of CH4 over Ni/Al2O3 catalysts using fluidized bed reactor

The effects of the Ni loading, total feed flow rate, prereduction temperature, reaction temperature and feed gas ratio for combination of CO₂ reforming and partial oxidation of CH₄ over Ni/Al₂O₃ were investigated using a fluidized bed reactor. Methane conversion to syngas was drastically enhanced using a fluidized bed reactor over Ni/Al₂O₃ catalyst calcined at high temperature. The fluidized bed and the fixed bed reactor were compared and a promoting mechanism of the fluidized bed reactor was proposed. This revised version was published online in August 2006 with corrections to the Cover Date.