A spectroscopic study of calcium surface sites and adsorbed iron species at aqueous fluorapatite by means of 1H and 31P MAS NMR

Assignments of the protolytic speciation at the calcium hydroxyl surface sites of synthetic fluorapatite and the chemical interactions between fluorapatite-maghemite and fluorapatite-Fe2+ ions have been studied by means of 1H and 31P single-pulse and 31P CP MAS NMR. Three possible forms of calcium hydroxyl surface sites have been suggested and assigned to [triple bond] CaOH, [triple bond]Ca(OH)2-, and [triple bond]CaOH2+, and their mutual ratios were found to vary as a function of pH. Due to their paramagnetic properties, iron species and Fe2+ ions adsorbed at the fluorapatite surface display a broad spinning sideband manifold in the single-pulse 31P MAS NMR spectra. The resonance lines in the 31P CP MAS NMR spectra originating from the bulk phosphate groups PO4(3-) and phosphorus surface sites [triple bond]POx and [triple bond]POxH decrease with increasing Fe2+ ion adsorption. When iron species originating from maghemite are adsorbed at the fluorapatite surface, no 31P NMR signal is detected, which supports the hypothesis that surface reactions occur between the phosphorus surface sites of fluorapatite and iron species.     

Solid-state NMR and EXAFS spectroscopic characterization of polycrystalline copper(I) O,O'-dialkyldithiophosphate cluster compounds: Formation of copper(I) O,O'-diisobutyldithiophosphate compounds on the surface of synthetic chalcocite

A number of polycrystalline copper(I) O,O'-dialkyldithiophosphate cluster compounds with Cu4, Cu6, and Cu8 cores were synthesized and characterized by using extended X-ray absorption fine-structure (EXAFS) spectroscopy. The structural relationship of these compounds is discussed. The polycrystalline copper(I) O,O'-diisobutyldithiophosphate cluster compounds, [Cu8{S2P(OiBu)2}6(S)] and [Cu6{S2P(OiBu)2}6], were also characterized by using 31P CP/MAS NMR (CP = cross polarization, MAS = magic-angle spinning) and static 65Cu NMR spectroscopies (at different magnetic fields) and powder X-ray diffraction (XRD) analysis. Comparative analyses of the 31P chemical-shift tensor, and the 65Cu chemical shift and quadrupolar-splitting parameters, estimated from the experimental NMR spectra of the polycrystalline copper(I) cluster compounds, are presented. The adsorption mechanism of the potassium O,O'-diisobutyldithiophosphate collector, K[S2P(OiBu)2], at the surface of synthetic chalcocite (Cu2S) was studied by means of solid-state 31P CP/MAS NMR spectroscopy and scanning electron microscopy (SEM). 31P NMR resonance lines from collector-treated chalcocite surfaces were assigned to a mixture of [Cu8{S2P(OiBu)2}6(S)] and [Cu6{S2P(OiBu)2}6] compounds.     

Characterization of active phosphorus surface sites at synthetic carbonate-free fluorapatite using single-pulse 1H, 31P, and 31P CP MAS NMR

The chemically active phosphorus surface sites defined as PO(x), PO(x)H, and PO(x)H2, where x = 1, 2, or 3, and the bulk phosphorus groups of PO4(3-) at synthetic carbonate-free fluorapatite (Ca5(PO4)3F) have been studied by means of single-pulse 1H,31P, and 31P CP MAS NMR. The changes in composition and relative amounts of each surface species are evaluated as a function of pH. By combining spectra from single-pulse 1H and 31P MAS NMR and data from 31P CP MAS NMR experiments at varying contact times in the range 0.2-3.0 ms, it has been possible to distinguish between resonance lines in the NMR spectra originating from active surface sites and bulk phosphorus groups and also to assign the peaks in the NMR spectra to the specific phosphorus species. In the 31P CP MAS NMR experiments, the spinning frequency was set to 4.2 kHz; in the single-pulse 1H MAS NMR experiments, the spinning frequency was 10 kHz. The 31P CP MAS NMR spectrum of fluorapatite at pH 5.9 showed one dominating resonance line at 2.9 ppm assigned to originate from PO4(3-) groups and two weaker shoulder peaks at 5.4 and 0.8 ppm which were assigned to the unprotonated PO(x) (PO, PO2-, and PO3(2-)) and protonated PO(x)H (PO2H and PO3H-) surface sites. At pH 12.7, the intensity of the peak representing unprotonated PO(x) surface sites has increased 1.7% relative to the bulk peak, while the intensity of the peaks of the protonated species PO(x)H have decreased 1.4% relative to the bulk peak. At pH 3.5, a resonance peak at -4.5 ppm has appeared in the 31P CP MAS NMR spectrum assigned to the surface species PO(x)H2 (PO3H2). The results from the 1H MAS and 31P CP MAS NMR measurements indicated that H+, OH-, and physisorbed H2O at the surface were released during the drying process at 200 degrees C.     

Formation of {Cu6[S2P(OC2H5)2]6} on Cu2S surfaces from aqueous solutions of the KS2P(OC2H5)2 collector: scanning electron microscopy and solid-state 31P cross-polarization/magic angle spinning and static 65Cu NMR studies

The interactions of synthetic chalcocite surfaces with diethyldithiophosphate, potassium salt, K[S2P(OC2H5)2], were studied by means of 31P cross-polarization/magic angle spinning (CP/MAS) NMR spectroscopy and scanning electron microscopy (SEM). To identify the species formed on the Cu2S surfaces, a polycrystalline {CuI6[S2P(OC2H5)2]6} cluster was synthesized and analyzed by SEM, powder X-ray diffraction techniques and solid-state 31P CP/MAS NMR and static 65Cu NMR spectroscopy. 31P chemical shift anisotropy (CSA) parameters, delta(cs) and eta(cs), were estimated and used for assigning the bridging type of diethyldithiophosphate ligands in the {CuI6[S2P(OC2H5)2]6} cluster. The latter data were compared to 31P CSA parameters estimated from the spinning sideband patterns in 31P NMR spectra of the collector-treated mineral surfaces: formation of polycrystalline {CuI6[S2P(OC2H5)2]6} on the Cu2S surfaces is suggested. The second-order quadrupolar line shape of 65Cu was simulated, and the NMR interaction parameters, CQ and etaQ, for the copper(I) diethyldithiophosphate cluster were obtained.     

Synthesis of four different antimony(III) O,O'-dialkyldithiophosphates: characterization by 31P CP/MAS NMR, single-crystal X-ray diffraction, and adsorption at a stibnite surface (Sb2S3)

Four different dialkyldithiophosphate (DTP) ions, (RO)(2)PSS(-) (R=C(3)H(7), iso-C(3)H(7), iso-C(4)H(9), and cyclo-C(6)H(11)), have been adsorbed on the surface of synthetically prepared stibnite, Sb(2)S(3), and studied by means of (31)P CP/MAS NMR. Corresponding individual [Sb{S(2)P(OR)(2)}(3)] complexes have also been synthesized and used for comparison with the surface-adsorbed DTP species. The results show that a low concentration of collector at the surface leads to a chemisorbed monolayer of DTP on the mineral surface. At high concentration of DTP, a surface precipitate of Sb(DTP)(3) is formed. (31)P CP/MAS NMR and chemical shift anisotropy data indicate that the SPS bite angle of the chemisorbed DTP groups on the surface is larger than in the corresponding precipitated complexes and the coordination of the ligands differs. Using single-crystal X-ray diffraction technique, the molecular structure of a solvated form of crystalline O,O'-di-cyclo-hexyldithiophosphate antimony(III) complex has been resolved. In this novel molecular structure, the central antimony atom S,S'-anisobidentately coordinates three structurally non-equivalent DTP groups, and therefore, the geometry of the [SbS(6)] chromophore can be approximated by a distorted octahedron. Besides that, useful correlations between (31)P CSA parameters and structural data on this complex were also established.     

Multinuclear solid-state NMR spectroscopy of doped lanthanum fluoride nanoparticles

Multinuclear solid-state NMR spectroscopy and powder X-ray diffraction (XRD) experiments are applied to comprehensively characterize a series of pure and lanthanide-doped LaF3 nanoparticles (NPs) that are capped with di-n-octadectyldithiophosphate ligands (Ln3+ = diamagnetic Y3+ and Sc3+ and paramagnetic Yb3+ ions), as well as correlated bulk microcrystalline materials (LaF3, YF3, and ScF3). Solid-state 139La and 19F NMR spectroscopy of bulk LaF3 and the LaF3 NPs reveal that the inorganic core of the NP retains the LaF3 structure at the molecular level; however, inhomogeneous broadening of the NMR powder patterns arises from distributions of 139La and 19F NMR interactions, confirming a gradual change in the La and F site environments from the NP core to the surface. 139La and 19F NMR experiments also indicate that low levels (5 and 10 mol %) of Ln3+ doping do not significantly change the LaF3 structure in the NP core. Similar doping levels of paramagnetic Yb3+ ions severely broaden 19F resonances, but only marginally effect 139La powder patterns, suggesting that the dopant ions are uniformly distributed throughout the NP core and occupy vacant La sites. Measurements of 139La T1 and T2 relaxation constants are seen to vary between the bulk material and NPs and between samples with diamagnetic and paramagnetic dopants. 45Sc NMR experiments confirm that the dopants are integrated into the La sites of the LaF3 core. Solid-state 1H and 31P magic-angle spinning (MAS) NMR spectra aid in probing the nature of the capping ligands and their interactions at the NP surface. 31P cross-polarization (CP)/MAS NMR experiments identify not only the dithiophosphate head groups but also thiophosphate and phosphate species which may form during NP synthesis. Finally, 19F-31P CP/MAS and 1H MAS experiments confirm that ligands are coordinated to the NP surface.     

Influence of synthetic routes on the conformational order and mobility of C18 and C30 stationary phases

Silica gels modified with n-alkyl chains (n = 18, 30) are prepared by two different synthetic routes and are examined by variable temperature FTIR and solid-state NMR spectroscopy. HPLC measurements of SRM 869, cis/trans ss-carotene isomers and xanthophylls isomers confirm the dependence of the separation mechanism on the alkyl chain length and the synthetic routes. The determination of the silane functionality and degree of cross-linking of silane ligands on the silica surface is achieved by 29Si CP/MAS NMR measurements. The structural order and mobility of the alkyl chains are investigated by means of variable temperature 13C CP/MAS NMR measurements. Variable temperature FTIR studies are performed where conformational order and flexibility of the alkyl chains in C18 and C30 phases are monitored through conformational sensitive CH2 symmetric, anti-symmetric stretching and wagging modes. In addition, the chromatographic properties of the C18 and C30 phases are determined. The results derived from the FTIR, NMR and HPLC measurements are discussed in the context of the applied synthetic routes and alkyl chain lengths.     

Effect of surface coverage on the conformation and mobility of C18-modified silica gels

C18-modified silica gels with surface coverages of 2 to 8.2 micromol m(-2), were prepared by different synthetic pathways and characterized by Fourier Transform infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (NMR) spectroscopy, and chromatographic measurements. The effects of temperature and bonding density on the conformational order of C18-modified silica gels were studied in detail by FTIR spectroscopy. The silane functionality and degree of cross-linking of silane ligands on the silica surface were evaluated by 29Si cross-polarization magic-angle spinning (CP/MAS) NMR and the structural order and mobility of the alkyl chains were investigated by 13C CP/MAS NMR spectroscopy. CH2 symmetric and anti-symmetric stretching bands and CH2 wagging bands were used as IR probes to monitor the conformational order and flexibility of the alkyl chains in the C18 phases. Qualitative information about the conformational order was obtained from frequency shifts of the CH2 symmetric and anti-symmetric stretching bands. The relative amounts of kink/gauche-trans-gauche, double-gauche, and end-gauche conformers in the alkyl chains were determined by analysis of CH2 wagging bands. These results indicate that surface coverage plays a dominant role in the conformational order of C18-modified silica gels. The FTIR and NMR data are discussed in the context of the chromatographic shape-selectivity differences.     

Further evidence of incorporation of chromium ions into the framework of silicoaluminophosphate molecular sieves

Three different molecular sieves were synthesised and characterized using³¹P and²⁷Al magic angle spinning nuclear magnetic resonance (³¹P and²⁷Al MAS NMR) spectroscopy and acidity measurement techniques. The synthesized solids were: a silicoaluminophosphate (SAPO-11) sample, a chromium-substituted silicoaluminophosphate (CrAPSO-11) sample and a chromium-supported SAPO-11 (Cr/SAPO-11) sample. Significant differences were observed between the CrAPSO-11 MAS NMR spectra and the spectra for the other two solids. The differences can be understood in terms of a different chemical environment for the Al(III) and P(V) ions in the molecular sieve framework, as a result of a different type of interaction, probably with substituted chromium ions in the framework. The acidity measurements were in agreement with the MAS NMR spectroscopy results, providing further evidence for the incorporation of chromium ions into the molecular sieve framework.     

Role of carboxylate chelating agents on the chemical, structural and textural properties of hydroxyapatite

Organically-modified hydroxyapatite materials were synthesized through the addition of oxalic, succinic, adipic and citric acids to a calcium hydroxide solution before neutralization by ammonium dihydrogenphosphate. All carboxylic acids have a significant influence on apatite crystallinity and nanoparticle size, as indicated by XRD and TEM. Chemical and thermogravimetric analyses as well as FTIR and {(1)H}-(13)C CP MAS NMR spectroscopies indicate that the additives are present in the final material. (1)H, {(1)H}-(31)P HPDec MAS, CP MAS and 2D {(1)H}-(31)P CP-HETCOR MAS NMR experiments suggest that carboxylic acids are localized on the apatite nanocrystallite surface, resulting in the formation of a disordered outer layer. Nitrogen sorption measurements indicate minor modifications of the specific surface area of the resulting mesoporous materials upon carboxylic acid addition but more significant variations in the average dimensions of the pores as well as in the chemical nature of the pore surface. Although these evolutions are mainly in good agreement with the ligand affinity for calcium ions in solution, an unexpected difference was observed between succinic and adipic acid, that may be attributed to steric constraints resulting from the interfacial nature of the calcium-ligand interactions. These data should provide useful guidelines to identify novel efficient additives to control apatite growth.     

Observation of (31)P-(31)P Indirect Spin-Spin Coupling in Copper-Bis(phosphine) Complexes by Two-Dimensional Solid-State NMR

The first observations of (31)P-(31)P indirect spin-spin (J) coupling in copper(I) phosphine complexes are reported for solid Cu(PPh(3))(2)X (X = NO(3)(-), BH(4)(-)). Values of (2)J((31)P,(31)P), 157 +/- 5 and 140 +/- 5 Hz for Cu(PPh(3))(2)NO(3) and Cu(PPh(3))(2)BH(4), respectively, have been obtained from two-dimensional (2D) J-resolved (31)P NMR spectra obtained under slow magic-angle spinning (MAS) conditions. In both complexes, the two phosphine ligands are crystallographically equivalent; thus, the two (31)P nuclei have identical isotropic chemical shifts. Under rapid sample spinning conditions, the (31)P MAS NMR spectra exhibit relatively sharp overlapping asymmetric quartets arising from (1)J((63/65)Cu,(31)P) and residual (63/65)Cu-(31)P dipolar interactions. No evidence of (2)J((31)P,(31)P) is apparent from the spectra obtained with rapid MAS; however, under slow MAS conditions there is evidence of homonuclear J-recoupling. Peak broadening due to heteronuclear dipolar interactions precludes measurement of (2)J((31)P,(31)P) from standard 1D (31)P MAS NMR spectra. It is shown that this source of broadening can be effectively eliminated by employing the 2D J-resolved experiment. For the two copper(I) phosphine complexes investigated in this study, the peak widths in the f(1) dimension of the 2D J-resolved (31)P MAS NMR spectra are about three times narrower than those found in the corresponding 1D (31)P MAS NMR spectra.     

Suitability of Different 13C Solid-state NMR Techniques in the Characterization of Humic Acids

Qualitative and quantitative analyses of humic acids (HAs) with five different ¹³C solid-state NMR techniques were assessed using HAs of various origins and locations. The NMR techniques compared are: (1) direct polarization/magic angle spinning (DP/MAS) at 13 kHz, (2) conventional cross polarization (CP)/MAS at 5 kHz, (3) ramp-CP/MAS at 8 kHz, (4) CP/total sideband suppression (TOSS) at 4.5 kHz, and (5) DP/MAS corrected by CP/spin-lattice relaxation with TOSS. The spectra from the five techniques were first compared qualitatively. Then, each spectrum was divided into eight regions for quantitative evaluation. DP/MAS spectra were used as quantitative references. Ramp-CP/MAS and CP/TOSS spectra gave consistently better results than those of the conventional CP/MAS spectra at a ¹³C frequency of 75 MHz, which were incorrect due to spinning sidebands. CP/MAS at low magnetic fields (22.6 and 50.6 MHz ¹³C frequency) indicated improved integration results but lower resolution. Correction factors calculated by comparison with DP/MAS will be useful to convert the non-quantitative peak areas in the CP/TOSS and ramp-CP/MAS spectra into more quantitative results.     

Synthesis,structural and multinuclear natural abundance (<Superscript>13</Superscript>C, <Superscript>31</Superscript>P, <Superscript>195</Superscript>Pt) CP/MAS NMR studies of crystalline O,O′-dialkyldithiophosphate platinum(II) complexes

Platinum(II) O,O′-dicyclohexyl dithiophosphate [Pt{S₂P(O-cyclo-C₆H₁₁)₂}₂] (I) and platinum(II) O,O′-diisopropyl dithiophosphate [Pt{S₂P(O-iso-C₃H₇)₂}₂] (II) complexes were obtained and studied by solidstate ¹³C, ³¹P, and ¹⁹⁵Pt CP/MAS NMR spectroscopy. The dithiophosphate (Dtph) ligands in molecular structure I were found to be coordinated by platinum in S,S′-bidentate fashion to form the planar chromophore [PtS₄] (single-crystal X-ray diffraction data). For complex II, a new α-form (α-II) was obtained and identified by ³¹P MAS NMR spectroscopy. The ³¹P chemical shift anisotropy δ_aniso and the asymmetry parameter η of the ³¹P chemical shift tensor were calculated from the whole MAS spectra.     

X-Ray and 31P CP MAS NMR studies of bis(dialkoxythiophosphoryl) disulfides

The crystal and molecular structures of the title compounds were determined by X-ray diffraction technique from diffractometer intensity measurements. It has been found that two homologous disulfides, bis(dimethoxythiophosphoryl) disulfide 1 and bis(dineopentoxythiophosphoryl) disulfide 2 , form different molecular and crystal structures with space groups C2/c and P&1macr;, respectively. These results were confirmed by ³¹P CP MAS NMR studies, which showed that under favorable conditions the solid state NMR may lead to determination of the number of crystallographically unique phosphorus atoms. Moreover, the variation of the disulfide S–S bond length versus torsional P–S–S–P angles was observed.     

Modification and intercalation of layered zirconium phosphates: a solid‐state NMR monitoring

Several layered zirconium phosphates treated with Zr(IV) ions, modified by monomethoxy‐polyethyleneglycol‐monophosphate and intercalated with doxorubicin hydrochloride have been studied by solid‐state MAS NMR techniques. The organic components of the phosphates have been characterized by the ¹³C{¹H} CP MAS NMR spectra compared with those of initial compounds. The multinuclear NMR monitoring has provided to establish structure and covalent attachment of organic/inorganic moieties to the surface and interlayer spaces of the phosphates. The MAS NMR experiments including kinetics of proton‐phosphorus cross polarization have resulted in an unusual structure of zirconium phosphate 6 combining decoration of the phosphate surface by polymer units and their partial intercalation into the interlayer space. Copyright © 2016 John Wiley & Sons, Ltd.     

Study of potassium O,O'-Dibutyldithiophosphate combining DFT, 31P CP/MAS NMR and infrared spectroscopy

Dithiophosphates are used in many different industrial applications. To explain their functions and properties in these applications, a fundamental understanding on a molecular level is needed. Potassium O, O'-Dibutyldithiophosphate and its anion have been investigated by means of a combination of DFT and (31)P CP/MAS NMR and infrared spectroscopy. Several low-energy conformations were studied by DFT. Three different conformations with significantly different torsion angles of the O-C bond relative to the O-P-O plane were selected for further studies of infrared frequencies and (31)P NMR chemical-shift tensors. A good agreement between theoretical and experimental results was obtained, especially when the IR spectra or (31)P chemical shift tensor parameters of all three conformations were added, indicating that, because of the low energy difference between the conformations, the molecules are rapidly fluctuating between them.     

Characterization of a chiral stationary phase by HR/MAS NMR spectroscopy and investigation of enantioselective interaction with chiral ligates by transferred NOE

The surface chemistry of a chiral stationary phase (CSP) with a (tert-butyl carbamoyl) quinine selector immobilized on thiol-modified silica has been characterized by (1)H HR/MAS NMR and (29)Si CP/MAS NMR spectroscopy. The mostly well-resolved (1)H signals could be assigned to stem from the surface-bound selector and the latter suggested a bi- and trifunctional silane linkage. Suspended-state NMR spectroscopy thus proved a well-characterized surface chemistry as proposed. To study chiral recognition phenomena in the presence of the CSP, (1)H HR/MAS 2D transfer NOESY investigations in methanol-d(4) have been undertaken with various solutes including N-3,5-dinitrobenzoyl derivatives of leucine (DNB-Leu) and N-acetyl phenylalanine (Ac-Phe). Both (R)- and (S)-enantiomers of DNB-Leu and Ac-Phe interacted with the tBuCQN-CSP as indicated by negative cross-peaks in the trNOESY spectra, while the 2D NOESY of the dissolved solutes in absence of the chiral stationary phase showed positive cross-peaks. The intensities of the trNOE cross-peaks were much stronger for the (S)-enantiomers. This stereoselectivity paralleled the experimental chromatographic behavior, where the (S)-enantiomers revealed stronger binding and retention on the tBuCQN-CSP as well. Hence, we were able to correlate the retention behavior to the trNOE NMR spectroscopic data in a qualitative manner.     

Phosphate uptake by TiO2: batch studies and NMR spectroscopic evidence for multisite adsorption

Systematic studies, combining batch experiments with NMR spectroscopic methods, are carried out for phosphate sorption on titanium dioxide (TiO(2)). It is found that phosphate sorption on TiO(2) decreases with increasing pH, whereas the phosphate uptake by TiO(2) increases with increasing ionic strength of the solution. In I ≤ 0.1 M, the sorption sharply increases and reaches a near maximum and then followed by little changes showing Langmuir-type behavior, whereas in I = 0.7 M, non-Langmuirian uptake becomes evident as equilibrium phosphate concentrations increase in solution. The sorption of phosphate on TiO(2) is rapid and mostly irreversible at pH 4.5 and 7.0. At pH 9.0, however, the phosphate sorption is initially reversible and followed by resorption of phosphate on TiO(2) at the system re-equilibration. (31)P{(1)H} cross-polarization and magic angle spinning (CP/MAS) NMR spectra contain at least four main peaks which appear similar in position and width under all adsorption conditions, but vary in intensity with surface loading. The spectral characteristics of these peaks, including cross-polarization dynamics and chemical shift anisotropy obtained from spinning sideband analysis, suggest that they arise from distinct inner-sphere adsorption complexes, most of which are protonated. These results indicate that uptake of phosphate by TiO(2) occurs by formation of several types of surface complexes.     

层状磷酸铝UT-4的固体核磁共振研究

用吡啶代替四乙二醇作为溶剂, 在Al2O3-H3PO4-C6H11NH2-Py体系下合成出层状阴离子骨架磷酸铝［Al2P3O12H］2-·2［C6H11NH+3］(UT-4)的纯晶相, 采用一维27Al, 31P MAS NMR , 1H→31P CP(Cross Polarization)以及二维27Al- 31P HETCOR(Heteronuclear Correlation)高分辨固体核磁共振技术对其骨架结构进行了表征. 采用两种方法对 27Al信号进行了归属, 并通过分析27Al-31P HETCOR谱对31P 信号进行了归属.