Interaction force measurement between E. coli cells and nanoparticles immobilized surfaces by using AFM

To better understand environmental behaviors of nanoparticles (NPs), we used the atomic force microscopy (AFM) to measure interaction forces between E. coli cells and NPs immobilized on surfaces in an aqueous environment. The results showed that adhesion force strength was significantly influenced by particle size for both hematite (α-Fe(2)O(3)) and corundum (α-Al(2)O(3)) NPs whereas the effect on the repulsive force was not observed. The adhesion force decreased from 6.3±0.7nN to 0.8±0.4nN as hematite NPs increased from 26nm to 98nm in diameter. Corundum NPs exhibited a similar dependence of adhesion force on particle size. The Johnson-Kendall-Roberts (JKR) model was employed to estimate the contact area between E. coli cells and NPs, and based on the JKR model a new model that considers local effective contact area was developed. The prediction of the new model matched the size dependence of adhesion force in experimental results. Size effects on adhesion forces may originate from the difference in local effective contact areas as supported by our model. These findings provide fundamental information for interpreting the environmental behaviors and biological interactions of NPs, which barely have been addressed.     

Viscous solvent colloidal system for direct visualization of suspension structure, dynamics and rheology

We introduce a model colloid system comprised of particles dispersed in a viscous solvent that can be applied to 3D direct visualization studies of suspension structure, dynamics and rheology. The colloids are poly(methyl methacrylate) (PMMA) spheres sterically stabilized by a copolymer of poly(diphenyl-dimethyl) (DPDM) siloxane that matches the refractive index of PMMA. The monodisperse particles, synthesized with mean diameter varying from 0.7 to 1.1 microm, are stably dispersed in a DPDM siloxane solvent, with viscosity varying from 2.2 to 4.3 Pa s at 20 degrees C. As opposed to other classes of PMMA colloids dispersed in organic solvents, this system displays minimal charge interactions. At room temperature, pair potential interactions (measured by extrapolation of pair correlation functions to infinite dilution) are well modeled by a generalized Lennard-Jones alpha-2alpha potential (alpha=10) with dimensionless interaction energy, epsilon/k(B)T=0.6. We use the DPDM-PMMA colloidal system in conjunction with confocal microscopy studies to measure: (i) the radial distribution function in 3D at dilute concentrations and (ii) the colloid self-diffusivity in 3D at dilute concentrations. Both measurements, neither previously reported in uncharged systems, are facilitated by the slow, viscous dynamics of the system. We also show that the viscosity and particle size of the system are such that the high-volume fraction shear thickening transition can be accessed at shear rates amenable to direct visualization.     

Characterisation of membrane surfaces: direct measurement of biological adhesion using an atomic force microscope

An atomic force microscope (AFM) in conjunction with coated colloid probe and cell probe techniques has been used to measure directly the adhesive force between both the protein bovine serum albumin (BSA) and a yeast cell at two different membranes. These were polymeric ultrafiltration membranes of similar MWCO (4000 Da) but of different materials (ES 404 and XP 117, PCI Membrane Systems, UK). The XP 117 membrane is made from a mixture of polymers chosen with the aim of achieving low fouling. The BSA was adsorbed on a 5 μm silica colloid probe formed from a tipless V-shaped AFM cantilever. The cell probe was created by immobilising a single yeast cell on such a tipless cantilever. Measurements were made in 10⁻² M NaCl solution. It was found for both protein and cell systems that the adhesive force at the ES 404 membrane was greater than that at the XP 117 membrane. The paper shows that coated colloid probe and cell probe techniques can provide useful means of directly quantifying the adhesion of biological materials to membrane surfaces.     

Direct measurement of hydrophobic forces on cell surfaces using AFM

Although hydrophobic forces are of great relevance in biological systems, quantifying these forces on complex biosurfaces such as cell surfaces has been difficult owing to the lack of appropriate, ultrasensitive force probes. Here, chemical force microscopy (CFM) with hydrophobic tips was used to measure local hydrophobic forces on organic surfaces and on live bacteria. On organic surfaces, we found an excellent correlation between nanoscale CFM and macroscale wettability measurements, demonstrating the sensitivity of the method toward hydrophobicity and providing novel insight into the nature of hydrophobic forces. Then, we measured hydrophobic forces associated with mycolic acids on the surface of mycobacteria, supporting the notion that these hydrophobic compounds represent an important permeation barrier to drugs.     

Isoelectric point of fluorite by direct force measurements using atomic force microscopy

Interaction forces between a fluorite (CaF2) surface and colloidal silica were measured by atomic force microscopy (AFM) in 1 x 10(-3) M NaNO3 at different pH values. Forces between the silica colloid and fluorite flat were measured at a range of pH values above the isoelectric point (IEP) of silica so that the forces were mainly controlled by the fluorite surface charge. In this way, the IEP of the fluorite surface was deduced from AFM force curves at pH approximately 9.2. Experimental force versus separation distance curves were in good agreement with theoretical predictions based on long-range electrostatic interactions, allowing the potential of the fluorite surface to be estimated from the experimental force curves. AFM-deduced surface potentials were generally lower than the published zeta potentials obtained from electrokinetic methods for powdered samples. Differences in methodology, orientation of the fluorite, surface carbonation, and equilibration time all could have contributed to this difference.     

A new technique for membrane characterisation: direct measurement of the force of adhesion of a single particle using an atomic force microscope

An Atomic Force Microscope (AFM) has been used to quantify directly the adhesive force between a colloid probe and two polymeric ultrafiltration membranes of similar MWCO (4000 Da) but different materials (ES 404 and XP 117, PCI Membrane Systems (UK)). The colloid probe was made from a polystyrene sphere (diameter 11 μm) glued to a V shaped AFM cantilever. Measurements were made in 10⁻² M NaCl solution at pH 8. It was found that the adhesive force at the ES 404 membrane was more than five times greater than that at the XP 117 membrane. As it allows direct quantification of particle/membrane interactions, this technique should be invaluable in the development of new membrane materials and in the elucidation of process behaviour.     

Analysis of rheology and wall depletion of microfibrillated cellulose suspension using optical coherence tomography

A rheometric method based on velocity profiling by optical coherence tomography (OCT) was used in the analysis of rheological and boundary layer flow properties of a 0.5% microfibrillated cellulose (MFC) suspension. The suspension showed typical shear thinning behaviour of MFC in the interior part of the tube, but the measured shear viscosities followed interestingly two successive power laws with an identical flow index (exponent) and a different consistency index. This kind of viscous behaviour, which has not been reported earlier for MFC, is likely related to a sudden structural change of the suspension. The near-wall flow showed existence of a slip layer of 2–12 μm thickness depending on the flow rate. Both the velocity profile measurement and the amplitude data obtained with OCT indicated that the slip layer was related to a concentration gradient appearing near the tube wall. Close to the wall the fluid appeared nearly Newtonian with high shear rates, and the viscosity approached almost that of pure water with decreasing distance from the wall. The flow rates given by a simple model that included the measured yield stress, viscous behavior, and slip behavior, was found to give the measured flow rates with a good accuracy.     

Polymer nanogels grafted from nanopatterned surfaces studied by AFM force spectroscopy

Nanopatterned cross-linked polymers are important for applications with controlled mechanical properties. Grafted linear and cross-linked polydimethylacrylamide gels on micro- and nanopatterns were created using iniferter-driven quasi-living radical polymerization combined with conventional photolithography and nanosphere lithography. Micropatterned linear polymers reproduce the expected scaling behavior at moderate grafting density. The addition of cross-linker to the polymerization solution leads to an increased tendency of early termination as determined by AFM force spectroscopy. Similarly, nanopatterned linear polymers show reduced thickness in agreement with the expected scaling relationship for nanoisland grafts that have reduced lateral confinement. The addition of cross-linker reintroduces some of the lateral confinement for the length of polymers reported here. The mechanical properties of both the micro- and nanopatterned linear as well as cross-linked polymers were analyzed using an algorithm to objectively determine the contact point in AFM force spectroscopy and two independent Hertz-based analysis approaches. The obtained Young's moduli are close to those expected for homogeneous thick polymer films and are independent of pattern size. Our results demonstrate that polymeric nanopillars with controlled elastic modulus can be fabricated using irreversible cross-linkers. They also highlight some of the factors that must be considered for successful fabrication of grafted nanopillars of defined mechanical and structural properties.     

Chemical force titration of plasma polymer-modified PDMS substrates by using plasma polymer-modified AFM tips

Plasma polymerization has gained increasing attention in surface functionalization. We use here chemical force titration to characterize PDMS (polydimethylsiloxane) substrates modified by maleic anhydride-pulsed plasma polymerization. The coating is hydrolyzed to promote the formation of dicarboxylic acid groups. To enhance the variation of the adhesion forces as a function of pH, we use AFM tips modified in the same way as the substrates. The pH-dependent adhesion measurements are performed at different KCl concentrations. The dicarboxylic nature of the maleic acid groups clearly emerges from the force titration curves. The surface pK(a) values (pK(a1) = 3.5 +/- 0.5 and pK(a2) = 9.5 +/- 0.5) of the dicarboxylic acids are evaluated from low electrolyte concentration solutions. The values are shifted toward higher pK(a) values when compared to maleic acid in solution. The first pK(a) appears in the titration force curve for low salt concentration as a peak. This peak changes to a sigmoidal shape at higher salt concentrations. The appearance of a peak is attributed to the formation of strong hydrogen bonds between the tip and the substrate as reported in the literature. The effect of the ionic strength on the force curves is explained by the condensation of counterions on the carboxylate groups. At high pH, the adhesion force almost vanishes. On the approach, at high pH, one first observes repulsion between the tip and the substrate, which varies exponentially with the tip/substrate distance. The decay length of this repulsion force is in good agreement with theoretical predictions of the Debye length, attesting to the electrostatic nature of the interactions. We also find that the replacement of monovalent cation K(+) by the divalent cation Ca(2+) leads to significant changes in the force titration curve at high pH where the dicarboxylic groups are fully ionized. We observe that the adhesion force no longer vanishes at high pH but even slightly increases with pH, an effect that is explained by Ca(2+) ions bridging between two carboxylate groups.     

Study of galactomannose interaction with solids using AFM, IR and allied techniques

Guar gum (GG) and locust bean gum (LBG) are two galactomannose polysaccharides with different mannose/galactose ratio which is widely used in many industrial sectors including food, textiles, paper, adhesive, paint, pharmaceuticals, cosmetics and mineral processing. They are natural nonionic polymers that are non-toxic and biodegradable. These properties make them ideal for industrial applications. However, a general lack of understanding of the interactions between the polysaccharides and solid surfaces has hindered wider application of these polymers. In this work, adsorption of locust bean gum and guar gum at the solid-liquid interface was investigated using adsorption tests, electrophoretic mobility measurements, FTIR, fluorescence spectroscopy, AFM and molecular modeling. Electrokinetic studies showed that the adsorption of GG and LBG on talc do not change its isoelectric point. In addition, GG and LBG adsorption on talc was found not to be affected by changes in solution conditions such as pH and ionic strength, which suggests a minor role of electrostatic force in adsorption. On the other hand, fluorescence spectroscopy studies conducted to investigate the role of hydrophobic bonding using pyrene probe showed no evidence of the formation of hydrophobic domains at talc-aqueous interface. Moreover, urea, a hydrogen bond breaker, markedly reduced the adsorption of LBG and GG on talc, supporting hydrogen bonding as an important role. In FTIR study, the changes in the infrared bands, associated with the CO stretch coupled to the CC stretch and OH deformation, were significant and therefore also supporting hydrogen bonding of GG and LBG to the solid surface. In addition, Langmuir modeling of adsorption isotherm further suggested that hydrogen bonding is the dominant force for polysaccharide adsorption since the adsorption free energy of these polymers is close to that for hydrogen bond formation. From molecular modeling, different helical structures are observed for LBG and GG because of their different galactose/mannose ratio and these polymers were found to adsorb flat on solid to let more of its OH groups in contact with the surface. All of the above results suggest that the main driving force for adsorption both of GG and LBG on talc is hydrogen bonding rather than hydrophobic force even though there is difference in G/M ratio between them.     

Attachment of nanoparticles to the AFM tips for direct measurements of interaction between a single nanoparticle and surfaces

Here we report a universal method of attachment/functionalization of tips for atomic force microscope (AFM) with nanoparticles. The particles of interest are glued to the AFM tip with epoxy. While the gluing of micron size particles with epoxy has been known, attachment of nanoparticles was a problem. The suggested method can be used for attachment of virtually any solid nanoparticles. Approximately every other tip prepared with this method has a single nanoparticle terminated apex. We demonstrate the force measurements between a single approximately 50 nm ceria nanoparticle and flat silica surface in aqueous media of different acidity (pH 4-9). Comparing forces measured with larger ceria particles ( approximately 500 nm), we show that the interaction with nanoparticles is qualitatively different from the interaction with larger particles.     

Microcoulometric measurement of water in minerals

A DuPont Moisture Analyzer is used in a microcoulometric method for determining water in minerals. Certain modifications, which include the heating of the sample outside the instrument, protect the system from acid gases and insure the conversion of all hydrogen to water vapor. Moisture analyzer data are compared to concurrent data obtained by a modified Penfield method. In general, there is a positive bias of from 0.1 to 0.2% in the moisture analyzer results and a similarity of bias in minerals of the same kind. Inhomogeneity, sample size, and moisture pick-up are invoked to explain deviations. The method is particularly applicable to small samples.     

Facile measurement of polymer film thickness ranging from nanometer to micrometer scale using atomic force microscopy

As many properties of polymer thin films critically depend on their thickness, a convenient and cost‐effective method for precise measurement of film thickness in a wide range is highly desirable. Here, we present a method which enables polymer film thickness, ranging from nanometer to micrometer scale, to be facilely determined by measuring the height of an artificially created film step on smooth substrates with atomic force microscopy (AFM). Three polymeric films (polystyrene, poly(methyl methacrylate) and poly(styrene–ethylene/butylene–styrene) films), spin‐coated on either mica or quartz substrate with thickness ranging from 5.7 nm to 4.4 µm, were employed to demonstrate the procedure and feasibility of our method. The proposed method is particularly suitable for thicker polymer films, thus complementing the traditional AFM ‘tip‐scratch’ method which is generally limited to polymer films of no more than 100 nm thickness. Copyright © 2010 John Wiley & Sons, Ltd.     

In situ evaluation of anticancer drug methotrexate-DNA interaction using a DNA-electrochemical biosensor and AFM characterization

An in situ evaluation of the dsDNA-methotrexate (MTX) interaction was performed by voltammetry using a DNA-electrochemical biosensor and characterized by atomic force microscopy (AFM) at a highly oriented pyrolytic graphite (HOPG) surface. Electrochemical experiments in incubated solutions showed that the interaction of MTX with dsDNA leads to modifications to the dsDNA structure in a time-dependent manner. The AFM images show reorganization of the DNA self-assembled network on the surface of the HOPG electrode upon binding methotrexate and the formation of a more densely packed and slightly thicker MTX-dsDNA lattice with a large number of aggregates embedded into the network film. The intercalation of MTX between complementary base pairs of dsDNA lead to the increase of purine oxidation peaks due to the unwinding of the dsDNA. The dsDNA-electrochemical biosensor and the purinic homo-polynucleotide single stranded sequences of guanosine and adenosine, poly[G] and poly[A]-electrochemical biosensors, were used to investigate and understand the interaction between MTX and dsDNA.     

Preparation of hexagonal platy particles of nanoporous silica using hydrotalcite as morphology template

Hexagonal platy composite particles with a hydrotalcite core and a nanoporous silica shell with a thickness of ca. 100 nm were synthesized by the reaction of a Mg-Al hydrotalcite with a homogeneous aqueous solution containing tetraethoxysilane, hexadecyltrimethylammonium chloride, ammonia and methanol at 3 degrees C. The calcination of the products at 500 degrees C in air led to the composite particle with a Mg/Al mixed oxide core and a nanoporous silica shell. Hexagonal platy particles of nanoporous silica with a pore diameter of 2.3 nm and BET surface area of 700 m(2) (g of silica)(-1) were obtained by removing the Mg/Al mixed oxide core.     

Direct force measurement between cucurbit[6]uril and spermine using atomic force microscopy

The rupture forces of individual host-guest complexes between surface-confined cucurbit[6]uril (CB[6]) and spermine derivatives were measured directly by atomic force microscopy (AFM). While 1,2-dithiolane-attached spermine was immobilized on a gold-coated AFM tip, perallyloxyCB[6] was attached to an allyl-terminated self-assembled monolayer on a gold substrate by olefin metathesis reaction. A histogram and autocorrelation function analysis yielded a rupture force of approximately 120 pN, which is the highest value ever reported for a synthetic host-guest system.     

Conformational transition of acidic peptides exposed to minerals in suspension

Mineral surfaces probably participated in the chemical processes which led to life in the primitive oceans. The ordered conformations of simple acidic peptides exposed to insoluble minerals are described. Alternating poly(Glu-Leu) adopts a random coil conformation in water due to charge repulsion. The polypeptide extracts cations from insoluble crystalline CdS or molybdenum and adopts an ordered conformation. CdS leads to the formation of beta-sheets whereas molybdenum leads to alpha-helices. Peptides with at least 10-amino acids are necessary to exhibit a significative adsorption onto the surface. Under the same conditions, montmorillonite adsorbs the polypeptide but does not induce any conformational change.     

Simple measurement of14C in the environment using a gel suspension method

A simple analytical method for environmental¹⁴C with a low background liquid scintillation counter was developed. We used a new gelling agent, N-lauroyl-L-glutamic-α,γ-dibutylamide, for the liquid scintillation counting of¹⁴C as CaCO₃ (gel suspension method). Our procedure for sample preparation was much simpler than that of conventional methods and required no special equipment. The samples prepared with the standard sample of CaCO₃ were measured to evaluate the self absorption of the sample, the optimum condition of counting and the detection limit. Our results indicated that the newly developed technique could be efficiently applied for the monitoring of environmental¹⁴C.     

The effect of surface properties on the strength of attachment of fungal spores using AFM perpendicular force measurements

Polymeric substrata may be biodegraded by fungal species resulting in damaged, weakened and unsightly materials. This process typically begins with fungal spore attachment to the surface. In order to better understand the processes that precedes a biofouling event, fungal spore attachment to a range of surfaces, was determined using perpendicular force measurements. This was carried out using atomic force microscope cantilevers modified with fungal spores from Aspergillus niger 1957 (5μm diameter, non-wettable, spherical), Aspergillus niger 1988 (5μm diameter non-wettable, spikey) or Aureobasidium pullulans (5μm-10μm sized, wettable, ellipsoidal). The strength of attachment of the spores was determined in combination with seven surfaces (nitric acid cleaned glass, cast poly(methylmethacrylate) sheet [c-PMMA], polytetrafluoroethylene [PTFE], silicon wafers spin coated with poly(3-methacryloxypropyltrimethoxy silane (γ-MPS)-co-methylmethacrylate (MMA)) [p(γ-MPS-co-MMA)], poly (γ-MPS-co-lauryl methacrylate) [p(γ-MPS-co-LMA)] [both in a ratio of 10-90], PMMA dissolved in a solvent [PMMAsc] and silicon wafers). Perpendicular force measurements could not be related to the R(a) values of the surfaces, but surface wettability was shown to have an effect. All three spore types interacted comparably with the surfaces. All spores attached strongly to c-PMMA and glass (wettable surfaces), and weakly to PTFE, (p(γ- MPS-co-LMA)) (non-wettable) and (p(γ-MPS-co-MMA)). Spore shape also affected the strength of attachment. Aureobasidium pullulans spores attached with the widest range of forces whilst A. niger 1957 attached with the smallest. Findings will inform the selection of surfaces for use in environments where biofouling is an important consideration.