Influence of vacancy ordering on the percolative behavior of (Li(1)(-x)Na(x))(3y)La(2/3-y)TiO(3) perovskites

Influence of the vacancy concentration on the Li conductivity of the (Li(1-x)Na(x))(0.2)La(0.6)TiO(3) and (Li(1-x)Na(x)(0.5)La(0.5)TiO(3) perovskite series, with 0 < or = x < 1, has been investigated by neutron diffraction (ND), impedance spectroscopy (IS), nuclear magnetic resonance (NMR), and Monte Carlo simulations. In both series, Li(+) ions occupy unit cell faces, but Na(+) ions are located at A sites of the perovskite. From this fact, the amount of vacant A sites that participate in Li conductivity is given by the expression n(v) = [Li] + square, where square is the nominal vacancy concentration. Substitution of Li by Na decreases the amount of vacancies, reducing drastically the Li conductivity when n(v) approaches the percolation threshold of the perovskite conduction network. In disordered (Li(1-x)Na(x))(0.5)La(0.5)TiO(3) perovskites, the percolation threshold is 0.31; however, in ordered (Li(1-x)Na(x))(0.2)La(0.6)TiO(3) perovskites, this parameter changes to 0.26. Near the percolation threshold, the amount of mobile Li species deduced by (7)Li NMR spectroscopy is lower than that derived from structural formulas but higher than deduced from dc conductivity measurements. Conductivity values have been explained by Monte Carlo simulations, which assume a random walk for Li ions in the conduction network of the perovskite. In these simulations, distribution of vacancies conforms to structural models deduced from ND experiments.     

Characterization of Rh-Cr mixed-oxide nanoparticles dispersed on (Ga(1-x)Zn(x))(N(1-x)Ox) as a cocatalyst for visible-light-driven overall water splitting

The structure of Rh-Cr mixed-oxide (Rh(2)(-)(y)Cr(y)O(3)) nanoparticles dispersed on (Ga(1)(-)(x)Zn(x))(N(1)(-)(x)O(x)) is characterized by electron microscopy and X-ray spectroscopy. The Rh(2)(-)(y)Cr(y)O(3) nanoparticle is an efficient cocatalyst for photocatalytic overall water splitting on the (Ga(1)(-)(x)Zn(x))(N(1)(-)(x)O(x)) solid solution and is loaded onto the catalyst by impregnation from an aqueous solution containing Na(3)RhCl(6).2H(2)O and Cr(NO(3))(3).9H(2)O followed by calcination in air. Impregnation of the (Ga(1)(-)(x)Zn(x))(N(1)(-)(x)O(x)) with 1 wt % Rh and 1.5 wt % Cr followed by calcination at 623 K for 1 h provides the highest photocatalytic activity. Structural analyses reveal that the activity of this photocatalyst is strongly dependent on the generation of trivalent Rh-Cr mixed-oxide nanoparticles with optimal composition and distribution.     

La_(0.5)Na_(0.5)TiO_3纳米晶的制备及光致发光研究

以硬脂酸、硝酸镧、氢氧化钠和钛酸四丁酯为原料制备了La0 .5Na0 .5TiO3 纳米晶 ,粒度最小可达 1 4nm ,烧成温度为 50 0℃ ,低于传统固相反应的合成温度。光致发光研究表明 :用 392nm光作激发光 ,在室温下观察到了一个强的蓝光发射带 ,并且它的强度和半宽度随粒度发生明显变化。     

Structural study of the Li(0.5)Na(0.5)MnFe2(PO4)3 and Li(0.75)Na(0.25)MnFe2(PO4)3 alluaudite phases and their electrochemical properties as positive electrodes in lithium batteries

The alluaudite lithiated phases Li(0.5)Na(0.5)MnFe(2)(PO(4))(3) and Li(0.75)Na(0.25)MnFe(2)(PO(4))(3) were prepared via a sol-gel synthesis, leading to powders with spongy characteristics. The Rietveld refinement of the X-ray and neutron diffraction data coupled with ab initio calculations allowed us for the first time to accurately localize the lithium ions in the alluaudite structure. Actually, the lithium ions are localized in the A(1) and A(1)' sites of the tunnel. M?ssbauer measurements showed the presence of some Fe(2+) that decreased with increasing Li content. Neutron diffraction revealed the presence of a partial Mn/Fe exchange between the two transition metal sites that shows clearly that the oxidation state of the element is fixed by the type of occupied site. The electrochemical properties of the two phases were studied as positive electrodes in lithium batteries in the 4.5-1.5 V potential window, but they exhibit smaller electrochemical reversible capacity compared with the non-lithiated NaMnFe(2)(PO(4))(3). The possibility of Na(+)/Li(+) ion deintercalation from (Na,Li)MnFe(2)(PO(4))(3) was also investigated by DFT+U calculations.     

The quantum cutting of Tb(3+) in Ca(6)Ln(2)Na(2)(PO(4))(6)F(2) (Ln = Gd, La) under VUV-UV excitation: with and without Gd(3+)

The VUV-vis spectroscopic properties of Tb(3+) activated fluoro-apatite phosphors Ca(6)Ln(2-x)Tb(x)Na(2)(PO(4))(6)F(2) (Ln = Gd, La) were studied. The results show that phosphors Ca(6)Gd(2-x)Tb(x)Na(2)(PO(4))(6)F(2) with Gd(3+) ions as sensitizers have intense absorption in the VUV range. The emission color of both phosphors can be tuned from blue to green by changing the doping concentration of Tb(3+) under 172 nm excitation. The visible quantum cutting (QC) via cross relaxation between Tb(3+) ions was observed in cases with and without Gd(3+). Though QC can be realized in phosphors Ca(6)La(2-x)Tb(x)Na(2)(PO(4))(6)F(2), we found that Gd(3+)-containg phosphors have a higher QC efficiency, confirming that the Gd(3+) ion indeed plays an important role during the quantum cutting process. In addition, the energy transfer process from Gd(3+) to Tb(3+) as well as (5)D(3)-(5)D(4) cross relaxation was investigated and discussed in terms of luminescence spectra and decay curves.     

Structure Refinement and Two-Center Luminescence of Ca(3)La(3)(BO(3))(5):Ce(3+) under VUV-UV Excitation

A series of Ca(3)La(3(1-x))Ce(3x)(BO(3))(5) phosphors were prepared by a high-temperature solid-state reaction technique. Rietveld refinement was performed using the powder X-ray diffraction (XRD) data, which shows occupation of Ce(3+) on both Ca(2+) and La(3+) sites with a preferred location on the La(3+) site over the Ca(2+) site. The prepared samples contain minor second phase LaBO(3) with contents of ～0.64-3.27 wt % from the Rietveld analysis. LaBO(3):1%Ce(3+) was prepared as a single phase material and its excitation and emission bands were determined for identifying the influence of impurity LaBO(3):Ce(3+) luminescence on the spectra of the Ca(3)La(3(1-x))Ce(3x)(BO(3))(5) samples. The luminescence properties of Ca(3)La(3(1-x))Ce(3x)(BO(3))(5) samples under vacuum ultraviolet (VUV) and UV excitation were investigated, which exhibited two-center luminescence of Ce(3+), assigned to the Ce(1)(3+) center in the La(3+) site and Ce(2)(3+) center in the Ca(2+) site, taking into account the spectroscopic properties and the Rietveld refinement results. The influences of the doping concentration and the excitation wavelength on the luminescence of Ce(3+) in Ca(3)La(3(1-x))Ce(3x)(BO(3))(5) are discussed together with the decay characteristics.     

Nanoscale Hemispheres in Novel Mixed-Valent Uranyl Chromate(V,VI), (C(3)NH(10))(10)[(UO(2))(13)(Cr(12)(5+)O(42))(Cr(6+)O(4))(6)(H(2)O)(6)](H(2)O)(6)

The structure of a novel mixed-valent chromium uranyl compound, (C(3)NH(10))(10)[(UO(2))(13)(Cr(12)(5+)O(42))(Cr(6+)O(4))(6)(H(2)O)(6)](H(2)O)(6) (1), obtained by the combination of a hydrothermal method and evaporation from aqueous solutions with isopropylammonium, contains uranyl chromate hemispheres with lateral dimensions of 18.9 × 18.5 ?(2) and a height of about 8 ?. The hemispheres are centered by a UO(8) hexagonal bipyramid surrounded by six dimers of Cr(5+)O(5) square pyramids, UO(7) pentagonal bipyramids, and Cr(6+)O(4) tetrahedra. The hemispheres are linked into two-dimensional layers so that two adjacent hemispheres are oriented in opposite directions relative to the plane of the layer. From a topological point of view, the hemispheres have the formula U(21)Cr(23) and can be considered as derivatives of nanospherical cluster U(26)Cr(36) composed of three-, four-, and five-membered rings.     

Polyoxoanions Derived from [gamma-SiO(4)W(10)O(32)](8-)-Containing Oxo-Centered Dinuclear Chromium(III) Carboxylato Complexes: Synthesis and Single-Crystal Structural Determination of [gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCCH(3))(2)(OH(2))(2)](5-)

The previously unknown heteropolyoxometalates [gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCR)(2)(OH(2))(2)](5-) (R = H, CH(3)) have been prepared by the reaction of [gamma-SiO(4)W(10)O(32)](8-) with [Cr(OH(2))(6)](3+) in formate or acetate buffer solution. Isolation of these new Cr(III)-substituted polyoxometalates was accomplished both as Cs(+) salts and as the Bu(4)N(+) salt for the acetate-containing anion. The compounds were characterized by elemental analysis, UV/vis, IR, and ESR spectroscopy, and cyclic voltammetry. The single-crystal X-ray structural analysis of (Bu(4)N)(3)H(2)[gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCCH(3))(2)(OH(2))(2)].3H(2)O [P2(1)2(1)2(1); a = 17.608(12), b = 20.992(13), c = 24.464(11) ?; Z = 4; R = 0.057 for 6549 observed independent reflections] reveals that the two corner-linked CrO(6) octahedra are additionally bridged by two acetate groups, demonstrating the relationship to the well-studied oxo-centered trinuclear carboxylato complexes of Cr(III).     

Synthesis and characterization of iron(III)-substituted, dimeric polyoxotungstates, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](n-) (n = 6, X = As(III), Sb(III); n = 4, X = Se(IV), Te(IV))

Interaction of the lacunary [alpha-XW(9)O(33)](9-) (X = As(III), Sb(III)) with Fe(3+) ions in acidic, aqueous medium leads to the formation of dimeric polyoxoanions, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)) in high yield. X-ray single-crystal analyses were carried out on Na(6)[Fe(4)(H(2)O)(10)(beta-AsW(9)O(33))(2)] x 32H(2)O, which crystallizes in the monoclinic system, space group C2/m, with a = 20.2493(18) A, b = 15.2678(13) A, c = 16.0689(14) A, beta = 95.766(2) degrees, and Z = 2; Na(6)[Fe(4)(H(2)O)(10)(beta-SbW(9)O(33))(2)] x 32H(2)O is isomorphous with a = 20.1542(18) A, b = 15.2204(13) A, c = 16.1469(14) A, and beta = 95.795(2) degrees. The selenium and tellurium analogues are also reported, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](4-) (X = Se(IV), Te(IV)). They are synthesized from sodium tungstate and a source of the heteroatom as precursors. X-ray single-crystal analysis was carried out on Cs(4)[Fe(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)] x 21H(2)O, which crystallizes in the triclinic system, space group P macro 1, with a = 12.6648(10) A, b = 12.8247(10) A, c = 16.1588(13) A, alpha = 75.6540(10) degrees, beta = 87.9550(10) degrees, gamma = 64.3610(10) gamma, and Z = 1. All title polyanions consist of two (beta-XW(9)O(33)) units joined by a central pair and a peripheral pair of Fe(3+) ions leading to a structure with idealized C(2h) symmetry. It was also possible to synthesize the Cr(III) derivatives [Cr(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)), the tungstoselenates(IV) [M(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)]((16)(-)(4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), and Hg(2+)), and the tungstotellurates(IV) [M(4)(H(2)O)(10)(beta-TeW(9)O(33))(2)]((16-4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), and Hg(2+)), as determined by FTIR. The electrochemical properties of the iron-containing species were also studied. Cyclic voltammetry and controlled potential coulometry aided in distinguishing between Fe(3+) and W(6+) waves. By variation of pH and scan rate, it was possible to observe the stepwise reduction of the Fe(3+) centers.     

Na(THF)2Cr(N3N)]: The first trigonal monopyramidal chromium(II) complex

Reduction of [Cr(N(3)N)] (1) [(N(3)N)(3)(-) = ((SiMe(3)NCH(2)CH(2))(3)N)(3)(-)] with sodium powder in THF affords the yellow, extremely air-sensitive amidochromate(II) [Na(THF)(2)Cr(N(3)N)] (2) in good yield. Complex 2 has an effective magnetic moment of 5.1 mu(B) indicative of a d(4) high-spin electronic configuration. (1)H NMR spectroscopy in solution and single-crystal X-ray crystallography show that compound 2 is composed of idealized C(s) symmetric contact ion pairs, in which trigonal-monopyramidal [Cr(II)(N(3)N)](-) anions are linked to the [Na(THF)(2)](+) countercations by two bridging amide ligands. DFT calculations of 1, 2, and the anion [Cr(N(3)N)](-) at the RI-BP86/TZVPP level of theory provide in combination with extended Hückel calculations a rationale for the observed structural changes from 1 to 2.     

Synthesis, crystal structure, and solution stability of Keggin-type heteropolytungstates (NH4)6NiII0.5[alpha-FeIIIO4W11O30NiIIO5(OH2)].nH2O, (NH4)7Zn0.5[alpha-ZnO4W11O30ZnO5(OH2)].nH2O, and (NH4)7NiII0.5[alpha-ZnO4W11O30NiIIO5(OH2)].nH2O (n approximately 18)

Reaction of acidified (pH approximately 7) sodium tungstate solutions with transition metal cations (Fe(3+), Ni(2+), Zn(2+), Co(2+)) leads to the formation of transition-metal-disubstituted Keggin-type heteropolytungstates with 3d-metal ions distributed over three different positions. A detailed investigation of the synthesis conditions confirmed that the complexes could equally be obtained using aqueous solutions of either Na(2)WO(4).2H(2)O (sodium monotungstate) at pH approximately 7, Na(6)[W(7)O(24)]. approximately 14H(2)O (sodium paratungstate A), or Na(10)[H(2)W(12)O(42)].27H(2)O (sodium paratungstate B) as starting materials. Three complexes, (NH(4))(6)Ni(II)(0.5)[alpha-Fe(III)O(4)W(11)O(30)Ni(II)O(5)(OH(2))].18H(2)O, (NH(4))(7)Zn(0.5)[alpha-ZnO(4)W(11)O(30) ZnO(5)(OH(2))].18H(2)O, and (NH(4))(7)Ni(II)(0.5)[alpha-ZnO(4)W(11)O(30)Ni(II)O(5)(OH(2))].18H(2)O were isolated in crystalline form. X-ray single-crystal structure analysis revealed that the solid-state structures of the three compounds consist of four main structural fragments, namely [MO(4)W(11)O(30)M'O(5)(OH(2))](n-) (Keggin-type, alpha-isomer) heteropolytungstates, hexaquo metal cations, [M'(OH(2))(6)](2+), ammonium-water cluster ions, [(NH(4)(+))(8)(OH(2))(12)], and additional ammonium cations and water molecules. The 3d metals occupy the central (tetrahedral, M) and the peripheral (octahedral, M') positions of the Keggin anion, as well as cationic sites (M') outside of the polyoxotungstate framework. UV-vis spectroscopy, solution ((1)H, (183)W) and solid-state ((1)H) NMR, and also chemical analysis data provided evidence that the 3d-metal-disubstituted Keggin anions do not exist in solution but are being formed only during the crystallization process. Investigations in the solid state and in solution were completed by ESR, IR, and Raman measurements.     

Structural characterization of the first hydroxo-bridged plutonium compound, (PuO(2))(2)(IO(3))(mu(2)-OH)(3)

The hydrothermal reaction of a (239)Pu(IV) stock solution in the presence of iodic acid and 1 M KOH produces reddish-brown single crystals of (PuO(2))(2)(IO(3))(OH)(3). The structure consists of two-dimensional layers forming in the ac plane and is the first single-crystal structure of plutonium(VI) connected through hydroxide anions. The additional linkage of plutonium centers is completed through iodate ligands.     

Stabilising pentavalent actinides--visible-near infrared and X-ray absorption spectroscopic studies of the utility of the [(Np3W4O15)(H2O)3(MW9O33)3]18- (M = Sb, Bi) structural type

We report the interaction between B-type tri-lacunary heteropolyoxotungstate anions and actinyl(V) cations in aqueous solution, yielding a greater understanding of the stability of the O≡An≡O(1+) linear dioxo actinide moiety. Previously we reported that B-α-[BiW(9)O(33)](9-) and B-α-[SbW(9)O(33)](9-) will react with NpO(2)(1+) to yield [(Np(3)W(4)O(15))(H(2)O)(3)(MW(9)O(33))(3)](18-) (M = Bi, or Sb). Single crystal structural characterisation of salts of these complexes revealed a core in which three Np(V) atoms interact with a central W(VI) atom through bridging oxo groups. These bridging oxygen atoms come from one of the two axial oxygens in O≡Np≡O(1+) and represent a highly unusual interaction for a discrete molecular species. In this study visible/near infra-red spectroscopy indicates that [(Np(3)W(4)O(15))(H(2)O)(3)(BiW(9)O(33))(3)](18-) could be readily stabilized in solution at near neutral pH for several months, with (NH(4))(14)Na(4)[(Np(3)W(4)O(15))(H(2)O)(39)BiW(9)O(33))(3)]·62H(2)O crystallising from solution in high yield. At lower pH and [BiW(9)O(33)](9-) : NpO(2)(1+) ratios additional Np(V) species could be observed in solution. Stabilization of [(Np(3)W(4)O(15))(H(2)O)(3)(SbW(9)O(33))(3)](18-) in solution proved more challenging, with several distinctive Np(V) near infra-red transitions observed in solution. Slow complexation kinetics and reduction to Np(IV) was also observed. High [SbW(9)O(33)](9-) : NpO(2)(1+) molar ratios and careful control of solution pH was required to prepare solutions in which [(Np(3)W(4)O(15))(H(2)O)(3)(SbW(9)O(33))(3)](18-) was the only neptunium containing species. In stark contrast to the NpO(2)(1+) chemistry, [BiW(9)O(33)](9-) readily oxidizes PuO(2)(1+) to PuO(2)(2+) yielding further evidence of the decreased stability of Pu(V)vs. Np(V). Np L(II)-edge XAFS measurement revealed very good agreement with single crystal diffraction data for the Np structural environment for [(Np(3)W(4)O(15))(H(2)O)(3)(MW(9)O(33))(3)](18-) (M = Bi, or Sb) in the solid state. There was also good agreement between coordination shells for [(Np(3)W(4)O(15))(H(2)O)(3)(BiW(9)O(33))(3)](18-) in the solid state and in solution, yielding further confirmation of the high stability of this particular cluster.     

Lanthanide-tungstobismuthate clusters based on [BiW9O33]9- building units: synthesis, crystal structures, luminescent and magnetic properties

The reaction of Na(12)[Bi(2)W(22)O(74)(OH)(2)]·44H(2)O, Na(9)[BiW(9)O(33)]·16H(2)O, lanthanide chloride and Na(2)CO(3) in aqueous solution at a pH value of about 7.0 resulted in the three unprecedented giant lanthanide-tungstobismuthate clusters Na(x)H(22-x)[(BiW(9)O(33))(4)(WO(3)){Bi(6)(μ(3)-O)(4)(μ(2)-OH)(3)}(Ln(3)(H(2)O)(6)CO(3))]·nH(2)O {Ln = Pr(3+) (1), Nd(3+) (2), La(3+) (3), x = 22 (1), 22 (2), 20 (3), n = 95 (1), 91 (2), 73 (3)}. These three complexes represent the first examples of lanthanide ions encapsulated in polyoxotungstobismuthates and the largest polytungstobismuthates so far. Furthermore, a [{Bi(6)(μ(3)-O)(4)(μ(2)-OH)(3)}](7+) polyoxo cation was incorporated into the structure of these compounds. All complexes are characterized by single-crystal X-ray diffraction, IR spectra, electronic spectroscopy, thermogravimetric and elemental analysis. Magnetic investigation revealed that the progressive depopulation of excited Stark sublevels of the lanthanide ions at low temperature and the weak antiferromagnetic interaction between the neighboring metal centres are responsible for the magnetic properties of 1 and 2. The original synthesis strategy in this work may open a gateway to assembly of large lanthanide-tungstobismuthates clusters and novel multifunctional solid materials in aqueous solution under mild conditions.     

Two new neptunyl(V) selenites: a novel cation-cation interaction framework in (NpO2)3(OH)(SeO3)(H2O)2 3H2O and a uranophane-type sheet in Na(NpO2)(SeO3)(H2O)

Dark green crystals of (NpO(2))(3)(OH)(SeO(3))(H(2)O)(2)·H(2)O (1) have been prepared by a hydrothermal reaction of neptunyl(V) and Na(2)SeO(4) in an aqueous solution at 150 °C, while green plates of Na(NpO(2))(SeO(3))(H(2)O) (2) have been synthesized by evaporation of a solution of neptunyl(V), H(2)SeO(4), and NaOH at room temperature. Both compounds have been characterized by single-crystal X-ray diffraction. The structure of compound contains three crystallographically unique Np atoms that are bonded to two O atoms to form a nearly linear O═Np═O NpO(2)(+) cation. Neighboring Np(5+) ions connect to each other through a bridging oxo ion from the neptunyl unit, a configuration known as cation-cation interactions (CCIs), to build a complex three-dimensional network. More specifically, each Np(1)O(2)(+), Np(2)O(2)(+), and Np(3)O(2)(+) cation is involved in three, five, and four CCIs with other units, respectively. The framework of neptunyl(V) pentagonal bipyramids is decorated by selenite trigonal pyramids with one-dimensional open channels where uncoordinated waters are trapped via hydrogen bonding interactions. Compound adopts uranophane-type [(NpO(2))(SeO(3))](-) layers, which are separated by Na(+) cations and water molecules. Within each layer, neptunyl(V) pentagonal bipyramids share equatorial edges with each other to form a single chain that is further connected by both monodentate and bidentate selenite trigonal pyramids. Crystallographic data: compound, monoclinic, P2(1)/c, Z = 4, a = 6.6363(8) ?, b = 15.440(2) ?, c = 11.583(1) ?, β = 103.549(1)°, V = 1153.8(2) ?(3), R(F) = 0.0387 for I > 2σ(I); compound (2), monoclinic, C2/m, Z = 4, a = 14.874(4) ?, b = 7.271(2) ?, c = 6.758(2) ?, β = 112.005(4)°, V = 677.7(3) ?(3), R(F) = 0.0477 for I > 2σ(I).     

Synthesis, X-ray structures and luminescence properties of three multidimensional metal-organic frameworks incorporating the versatile 5-(pyrimidyl)tetrazolato bridging ligand

The hydrated sodium salt of the novel and versatile 5-(pyrimidyl)tetrazolato ligand (pmtz(-)), Na(pmtz).H(2)O (1), has been prepared in very mild conditions from 2-cyanopyrimidine and NaN(3). Two coordination polymers [Cd(pmtz)(2)]n (2)and [Cd(pmtz)(micro-Cl)(0.5)(micro-N(3))(0.5)(H(2)O)](n)(3), , have been synthesized from (1)under conventional or hydrothermal conditions, respectively, and fully characterized by single-crystal or powder X-ray diffraction methods. Compounds and consist of mono-dimensional polymeric chains, further stabilized by interchain pi-pi stacking and hydrogen bond interactions. Compound , containing octacoordinated Cd ions of crystallographic D(2) symmetry, exhibits neutral (4, 4) layers formed by square units of the metallacalix[4]arene type in 1,3-alternate conformation. Species , and display intense, room temperature, photoluminescence in the solid state.     

Photophysical and photocatalytic properties of SrTiO3 doped with Cr cations on different sites

Usually, SrTiO3 monodoped with Cr cations at the Ti4+ site hardly shows visible light photocatalytic activity. Revealing the origin of this issue is important for us to find an alternative approach to make SrTiO3 active under visible light irradiation. In this paper, two Cr-doped SrTiO3-(Sr0.95Cr0.05)TiO3 and Sr(Ti0.95Cr0.05)O3-were synthesized by a conventional solid-state reaction method, and their photophysical and photocatalytic properties were studied comparatively. It was found that both (Sr0.95Cr0.05)TiO3 and Sr(Ti0.95Cr0.05)O3 showed considerable absorption to visible light. However, their photocatalytic activities for H2 evolution from aqueous methanol solution under visible light irradiation were significantly different: the H2 evolution rate over (Sr0.95Cr0.05)TiO3 (approximately 21 micromol/h) was more than 100 times that over Sr(Ti0.95Cr0.05)O3 (approximately 0.2 micromol/h). X-ray photoelectron spectroscopy analysis results revealed that the Cr cations doped at the Sr2+ site were all trivalent state (Cr3+), while those doped at the Ti4+ site were mixed valent states (Cr3+ and Cr6+). The different photocatalytic activities of H2 evolution are supposed to closely relate to the different valent states of Cr doped at different sites (Sr2+ or Ti4+) in SrTiO3. Possible electronic structures of (Sr0.95Cr0.05)TiO3 and Sr(Ti0.95Cr0.05)O3 were proposed in relation to their photophysical and photocatalytic properties.     

Electronic and molecular structures of the members of the electron transfer series [Cr(tbpy)3]n (n = 3+, 2+, 1+, 0): an X-ray absorption spectroscopic and density functional theoretical study

The electron transfer series of complexes [Cr((t)bpy)(3)](n)(PF(6))(n) (n = 3+, 2+, 1+, 0 (1-4)) has been synthesized and the molecular structures of 1, 2, and 3 have been determined by single-crystal X-ray crystallography; the structure of 4 has been investigated using extended X-ray absorption fine structure (EXAFS) analysis. Magnetic susceptibility measurements (4-300 K) established an S = 3/2 ground state for 1, an S = 1 ground state for 2, an S = 1/2 ground state for 3, and an S = 0 ground state for 4. The electrochemistry of this series in CH(3)CN solution exhibits three reversible one-electron transfer waves. UV-vis/NIR spectra and Cr K-edge X-ray absorption spectra (XAS) are reported. The same experimental techniques have been applied for [Cr(III)(tacn)(2)]Br(3)·5H(2)O (5) and [Cr(II)(tacn)(2)]Cl(2) (6), which possess an S = 3/2 and an S = 2 ground state, respectively (tacn = 1,4,7-triazacyclononane, a tridentate, pure σ-donor ligand). The Cr K-edge XAS spectra of the corresponding complexes K(4)[Cr(II)(CN)(6)]·10H(2)O (S = 1) (7) and K(3)[Cr(III)(CN)(6)] (S = 3/2) (8) have also been recorded. All complexes have been studied computationally with density functional theory (DFT) using the B3LYP functional. The molecular and electronic structures of the anionic members of the series [Cr(bpy)(3)](1-,2-,3-) have also been calculated. It is unequivocally shown that all members of the electron transfer series 1-4 and [Cr(bpy)(3)](n) (n = 3+, 2+, 1+, 0, 1-, 2, 3-) possess a central Cr(III) ion ((t(2g))(3), S = 3/2). The three N,N'-coordinated neutral (bpy(0)) ligands in the trication 1 and [Cr(III)(bpy)(3)](3+) are one-electron reduced in a stepwise fashion to localized one, two, and three π-radical anions (bpy(?))(1-) in the dicationic, monocationic, and neutral species, respectively. Complexes 2 and [Cr(bpy)(3)](2+) cannot be described as low-spin Cr(II) species; they are in fact best described as [Cr(III)((t)bpy(?))((t)bpy(0))(2)](2+) and [Cr(III)(bpy(?))(bpy(0))(2)](2+) species. Further one-electron reductions yield one, two, and three diamagnetic (bpy(2-))(2-) dianions in the mono-, di-, and trianion. Thus, [Cr(III)(bpy(2-))(3)](3-) is a normal Werner-type Cr(III) (!) species. In all complexes containing (bpy(?))(1-) ligands, the ligand spins are strongly antiferromagnetically coupled to the spins of the central Cr(III) ion (d(3), S(Cr) = 3/2) affording the observed ground states given above. Thus, all redox chemistry of [Cr(bpy)(3)](n) complexes is ligand-based and documents that the ligand 2,2'-bipyridine is a redox noninnocent ligand; it exists in three oxidation levels in these complexes: as N,N'-coordinated neutral (bpy(0)), monoanionic π-radical (bpy(?))(1-), and diamagnetic dianionic (bpy(2-))(2-).     

Di- and tricobalt Dawson sandwich complexes: synthesis,spectroscopic characterization,and electrochemical behavior of Na(18)[(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)] and Na(17)[(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)

The reaction of the trivacant Dawson anion alpha-[P(2)W(15)O(56)](12-) and the divalent cations Co(2+) is known to form the tetracobalt sandwich complex [Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-) (Co(4)P(4)W(30)). Two new complexes, with different Co/P(2)W(15) stoichiometry, [(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)](18-) (Na(2)Co(2)P(4)W(30)) and [(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)](17-) (NaCo(3)P(4)W(30)), have been synthesized as aqueous-soluble sodium salts, by a slight modification of the reaction conditions. Both compounds were characterized by IR, elemental analysis, and (31)P solution NMR spectroscopy. These species are "lacunary" sandwich complexes, which add Co(2+) cations according to Na(2)Co(2)P(4)W(30) + Co(2+) --> NaCo(3)P(4)W(30) + Na(+) followed by NaCo(3)P(4)W(30) + Co(2+) --> Co(4)P(4)W(30) + Na(+). A Li(+)/Na(+) exchange in the cavity was evidenced by (31)P dynamic NMR spectroscopy. The electrochemical behaviors of the sandwich complexes [(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)](17-) and [(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)](18-) were investigated in aqueous solutions and compared with that of [Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-). These complexes showed an electrocatalytic effect on nitrite reduction.     

Chromium(III) and chromium(IV) bis(trimethylsilyl)amido complexes as ethylene polymerisation catalysts

Oxidation of Cr[N(SiMe(3))(2)](2)(THF)(2) with iodine and dicumyl peroxide results in tetrahedral Cr(iv) Cr[N(SiMe(3))(2)](2)I(2) and trigonal planar Cr(iii) Cr[N(SiMe(3))(2)](OCMe(2)Ph)(2), respectively; both complexes have been characterised by single-crystal X-ray diffraction, and both are active for ethylene polymerisation with alkylaluminium co-catalysts.