Controlling the polarization fluctuation of excitons in armchair graphene ribbons by a laser field

We investigate the effect of the laser field on the polarization fluctuation of excitons in graphene ribbons. In order to calculate the fluctuation, we develop a bosonization method to deal with the electron-hole system. Our results show that the polarization fluctuation may be controlled by adjusting the strength and frequency of the laser field. The insulating armchair graphene ribbons may be divided into two types according to the width-dependences of the excitonic polarization fluctuation.     

基于宇称时间对称结构实现石墨烯光增强吸收

为增强石墨烯对近红外通信波段光波的吸收,提出了一种基于周期性宇称-时间(Parity-time)对称结构的石墨烯基吸收器,该结构由顶层的石墨烯层和底层周期性PT对称单元构成.采用传输矩阵方法系统地研究了该结构中石墨烯对1450～1650 nm波长范围内光波的吸收特性.结果表明,通过优化石墨烯复合PT对称微纳结构参数,对...     

Polarization‐independent absorption enhancement in a graphene square array with a cascaded grating structure

The polarization‐independent enhanced absorption effect of graphene in the near‐infrared range is investigated. This is achieved by placing a graphene square array on top of a dielectric square array backed by a two‐dimensional multilayer grating. Total optical absorption in graphene can be attributed to critical coupling, which is achieved through the combined effect of guided‐mode resonance with the dielectric square array and the photonic band gap with the two‐dimensional multilayer grating. To reveal the physical origin of such a phenomenon, the electromagnetic field distributions for both polarizations are illustrated. The designed graphene absorber exhibits near‐unity polarization‐independent absorption at resonance with an ultra‐narrow spectrum. Moreover, the polarization‐independent absorption can be tuned simply by changing the geometric parameters. The results may have promising potential for the design of graphene‐based optoelectronic devices.     

基于磁激元效应的石墨烯-金属纳米结构近红外吸收研究

石墨烯作为一种单层碳原子二维材料,在可见光和近红外波段吸收率只有2.3%左右,这限制了石墨烯在光电探测、光电调制等领域的应用.本文基于纳米超材料结构的磁激元共振效应,设计了一种金属-绝缘层-金属-石墨烯混合二维浅光栅结构,通过设计混合二维浅光栅结构尺寸来改变石墨烯化学势,实现了石墨烯在近红外波段的吸收增强和调制.利用有限元仿真和等效电路模型,系统地分析了非正入射、结构参数和石墨烯化学势对吸收特性的影响.研究结果表明,混合二维浅光栅结构的磁激元共振效应可以明显提升石墨烯在近红外波段的吸收率,并且对入射角度和极化方向不敏感.在特定结构参数下,混合二维浅光栅结构在1480nm处吸收率达到了85%,其中石墨烯的吸收率为55%,提升了24倍;通过调控石墨烯化学势从0.1eV增大到1.0eV,分别实现了不同结构尺寸下54.8%,50.3%,46.8%的反射率调制深度.     

Tunability of temperature-dependent absorption in a graphene-based hybrid nanostructure cavity

Enhanced absorption is obtained in a hybrid nanostructure composed of graphene and one-dimensional photonic crystal as a cavity in the visible wavelength range thanks to the localized electric field around the defect layers. The temperature-induced wavelength shift is revealed in the absorption spectra in which the peak wavelength is red-shifted by increasing the temperature. This temperature dependence comes from the thermal expansion and thermo-optical effects in the constituent layers of the structure. Moreover, the absorption peaks can be adjusted by varying the incident angle. The results show that absorption is sensitive to TE/TM polarization and its peak values for the TE mode are higher than the TM case. Also, the peak wavelength is blue-shifted by increasing the incident angle for both polarizations. Finally, the possibility of tuning the absorption using the electro-optical response of graphene sheets is discussed in detail. We believe our study may be beneficial for designing tunable graphene-based temperature-sensitive absorbers.     

Interaction of terahertz electromagnetic waves with periodic gratings of graphene micro- and nanoribbons

An original mathematical model of the interaction of terahertz (THz) electromagnetic waves with periodic gratings of graphene micro- and nanoribbons is based on the solution to the boundary-value problem of diffraction for the Maxwell equations with electrodynamic boundary conditions and material equations. The electrodynamic calculations of the transmission coefficients of the TEM wave versus frequency are performed for the 2D grating of graphene micro- and nanoribbons at several chemical potentials, grating periods, and geometrical sizes of ribbons. The results of the calculations show that the transmission spectrum exhibits a minimum in the THz range if the electric field of the wave is perpendicular to the graphene ribbons. The minimum is due to the plasmon resonance of the fundamental mode in graphene, and the absorption peaks at higher frequencies in the upper part of the THz range are related to the highorder plasmon modes.     

Synthesis of graphene ribbons using selective chemical vapor deposition

A new method for implementing graphene ribbons using selective graphene growth on metal-sidewall by chemical vapor deposition has been proposed. In this method, Ni catalyst is pre-patterned before chemical vapor deposition, and graphene film is selectively grown on the sidewall of the nickel for graphene ribbons. The graphene ribbons were confirmed by TEM image and Raman spectroscopy, and the fabricated graphene ribbon transistors showed well gate-modulated output characteristics. We believe this sidewall-graphene could be useful for applications such as graphene sensors which require high surface area of graphene.     

Enhancement of THz absorption in monolayer graphene for light at Brewster angle incidence

The enhancement of absorption in graphene for light at Brewster angle incidence is investigated. It is achieved by placing a graphene on a resonant Brewster filter that incorporating a spacer layer. The absorber presents above 50% absorption at resonance, which is attributed to the excitation of guided mode resonances. The electromagnetic field intensity distributions are illustrated to intuitively confirm the physical mechanism of such phenomenon. Moreover, the influence of geometric parameters on absorption is investigated to provide a useful guidance for practical fabrication. Besides, it is found that the absorption properties not only can be controlled by adjusting the incident angle but also can be dynamically tuned by changing the Fermi level. Last, the graphene absorption can be easily extended to multichannel by only an increase in the thickness of spacer. The results open new avenues for combining graphene with general guided mode resonance structure to enable novel optoelectronics device applications.     

Spectroscopic Mueller matrix polarimeter using four-channeled spectra

A Mueller matrix polarimeter acquired for four-channeled spectra is proposed. Both the polarizing and analyzing optics of this system consist of a linear polarizer and a high-order retarder. The polarizing elements can modulate the polarization states in the wavenumber space. By applying a Fourier transform method to a single-channeled spectrum, nine elements of the Mueller matrix can be deconvoluted without modifying the configuration of either the polarizing or analyzing optics. It is thus possible to determine the wavelength dependence of all the Mueller matrix elements from four-channeled spectra obtained using four different configurations for the polarizing and analyzing optics. The performance of this method is evaluated by measuring polarization properties, such as retardance, azimuthal angle, and linear diattenuation, from the obtained Mueller matrix in wavenumber space.     

Chirality effect in disordered graphene ribbon junctions

We investigate the influence of edge chirality on the electronic transport in clean or disordered graphene ribbon junctions. By using the tight-binding model and the Landauer-Büttiker formalism, the junction conductance is obtained. In the clean sample, the zero-magnetic-field junction conductance is strongly chirality-dependent in both unipolar and bipolar ribbons, whereas the high-magnetic-field conductance is either chirality-independent in the unipolar or chirality-dependent in the bipolar ribbon. Furthermore, we study the disordered sample in the presence of magnetic field and find that the junction conductance is always chirality-insensitive for both unipolar and bipolar ribbons with adequate disorders. In addition, the disorder-induced conductance plateaus can exist in all chiral bipolar ribbons provided the disorder strength is moderate. These results suggest that we can neglect the effect of edge chirality in fabricating electronic devices based on the magnetotransport in a disordered graphene ribbon.     

基于graphene条带的硅纳米结构

采用分子动力学模拟方法研究了graphene条带上生长硅纳米结构的过程,分析了不同温度下硅原子在graphene条带边沿生成的新型纳米结构.研究表明,随机分布的硅原子吸附到锯齿型graphene条带边沿在不同的温度T下可生成不同类型的硅纳米结构：300K≤T<2000K时形成无规则的团簇,2000K≤T≤2800K时形成单原子链结构,2800K<T<3900K时形成含缺陷的硅链结构,T≥3900K时硅原子逐渐替代条带边沿的碳原子直至graphene条带破坏.而硅原子吸附到扶手椅型graphene条带边沿在300K≤T<3000 K内仅能形成非链状的不定型的硅纳米结构. 关键词： graphene 硅 纳米结构 分子动力学模拟     

Ultra-broadband and polarization-independent planar absorber based on multilayered graphene

We propose an ultra-broadband and polarization independent planar absorber comprising multilayered graphene. The bandwidth of the proposed absorber is extended by increasing the number of layers of graphene, and it is polarization independent due to its symmetrical unit structure. The full wave simulation results show that an absorber with three graphenebased layers can efficiently harvest an electromagnetic wave with random polarization from 17.9 GHz to 188.7 GHz(i.e.,covering frequency regimes from K to D bands and relative bandwidth of ~ 165%). The physical absorption mechanism of ultra-broadband absorption has been elaborated upon using the destructive interference method and multiple resonances approach in a multilayered medium. The proposed absorber can be used in many applications such as medical treatment,electromagnetic compatibility, and stealth technique.     

Optical strong coupling in hybrid metal-graphene metamaterial for terahertz sensing

We propose a terahertz hybrid metamaterial composed of subwavelength metallic slits and graphene plasmonic ribbons for sensing application. This special design can cause the interaction between the plasmon resonances of the metallic slits and graphene ribbons, giving rise to a strong coupling effect and Rabi splitting. Intricate balancing in the strong coupling region can be perturbed by the carrier concentration of graphene, which is subject to the analyte on its surface. Thereby, the detection of analyte can be reflected as a frequency shift of resonance in terahertz transmission spectra. The result shows that this sensor can achieve a theoretical detection limit of 325 electrons or holes per square micrometer. Meanwhile, it also works well as a refractive index sensor with the frequency sensitivity of 485 GHz/RIU. Our results may contribute to design of ultra-micro terahertz sensors.     

新型偏振干涉成像光谱仪信噪比研究

基于辐射度学、电磁与偏振理论和傅里叶变换光谱学理论，从理论和实验上对超小型稳态偏振干涉成像光谱仪的信噪比进行了深入地分析与讨论.推导出了其信噪比的理论计算公式；采用计算机模拟给出了傍轴条件下信噪比随入射角的变化规律；深入分析了偏振干涉成像光谱仪所特有的偏振化方向对信噪比的影响.在调制度等于0.6，0.7，0.8，0.9，1.0时，给出信噪比随偏振器光轴偏角的变化关系，并给出最优化值.在最优化情况下，采用计算机模拟得出了信噪比随探测器像元数的变化规律，与干涉成像光谱实验结果完全相符.理论与实验结果表明，该偏振干涉成像光谱仪在高调制度的情况下具有高通量、高信噪比的显著特点，适合于航空航天、远距离目标和微弱信号的探测.该研究为新型偏振干涉成像光谱技术的研究和新型成像光谱仪的设计、研制和工程化提供了重要的理论依据和实践指导.     

Dual-function terahertz metasurface based on vanadium dioxide and graphene

A dual-function terahertz metasurface based on VO₂ and graphene is proposed in this paper. It consists of a gold layer embedded with VO₂ patches, a SiO₂ spacer layer, a VO₂ layer, graphene and a SiO₂ spacer substrate. When the bottom VO₂ layer is in the metallic state, the designed metasurface can achieve absorption. When the top VO₂ patches are in the metallic state, the proposed metasurface can be used as a single-band absorber with terahertz absorptance of 99.7% at 0.736 THz. When the top VO₂ patches are in the insulating state, the designed structure behaves as a dual-band absorber with an absorptance of 98.9% at 0.894 THz and 99.9% at 1.408 THz. In addition, the absorber is polarization insensitive and keeps good performance at large angles of incidence. When the bottom VO₂ is in an insulating state, the metasurface shows electromagnetically induced transparency. The transparent window can be dynamically regulated by controlling the chemical potential of graphene. The proposed metasurface exhibits the advantages of terahertz absorption, electromagnetically induced transparency and dynamic control, which provides more options for the design of terahertz devices in the future.     

Design and fabrication of ultra-high precision thin-film polarizing beam splitter

An ultra-high precision thin-film polarizing beam splitter (PBS) has been designed and fabricated. Using Needle optimization technology, we design the thin-film polarizing beam splitter that is transparent for P polarization and reflective for S polarization with ultra-high precision at 64.8° angle of incidence and 632.8 ± 10 nm wavelength band. The experiments with the fabricated thin-film PBS demonstrate that both the reflectance of P polarization and transmittance of S polarization at 64.8° angle of incidence and 632.8 nm wavelength point are less than 0.02%, which is ultra-high for reported PBSs.     

Anisotropy of the Raman spectra of nanographite ribbons

A polarized Raman study of nanographite ribbons on a highly oriented pyrolytic graphite substrate is reported. The Raman peak of the nanographite ribbons exhibits an intensity dependence on the light polarization direction relative to the nanographite ribbon axis. This result is due to the quantum confinement of the electrons in the 1D band structure of the nanographite ribbons, combined with the anisotropy of the light absorption in 2D graphite, in agreement with theoretical predictions.     

Design of a type of broadband metamaterial absorber based on metal and graphene

In this paper, we demonstrate a kind of broadband metamaterial perfect absorber using both graphene and metal resonator elements. Through step by step design and simulation, wider absorption band from about 4.22 THz to 7.48 THz with average absorption rate up to 98.21% is achieved in the absorption spectrum. In addition, the absorber has characteristics of polarization insensitivity and wide incident angle due to its inherent rotational symmetry. Moreover, the absorption band can be adjusted by changing the chemical potential of the graphene. The superiorities of broadband, high absorption rate, polarization independent and wide-angle characteristics make it have potential application prospects in electromagnetic wave absorbing, signal sensing and detection, and other optoelectronic devices.     

A polarization insensitive dual-band tunable graphene absorber at the THz frequency

A dual-band and polarization insensitive tunable graphene absorber for THz frequency has been proposed and investigated. The absorber consists of a square graphene ring with a slit at the middle of each side separated from a metallic mirror by a dielectric spacer. Two distinct absorption peaks of 99.87% and 97.82% are observed at 3.92 THz and 6.96 THz, respectively. In addition, the distributions of electric field intensity are also presented for well-recognized the physical origin of such perfect absorption phenomenon. Furthermore, the influence of geometric parameters on the dual-band absorption properties is studied in detail to provide a useful guidance for practical fabrication. The perfect dual-band absorption properties can also be dynamically tuned through the change of the Fermi energy along with large angle insensitivity, both are interesting for real application. The proposed tunable graphene absorber should found potential applications in areas including sensors, modulators, and detectors.     

Graphene valley filter using a line defect

With its two degenerate valleys at the Fermi level, the band structure of graphene provides the opportunity to develop unconventional electronic applications. Herein, we show that electron and hole quasiparticles in graphene can be filtered according to which valley they occupy without the need to introduce confinement. The proposed valley filter is based on scattering off a recently observed line defect in graphene. Quantum transport calculations show that the line defect is semitransparent and that quasiparticles arriving at the line defect with a high angle of incidence are transmitted with a valley polarization near 100%.