Synthesis and characterization of a silylated Brazilian clay mineral surface

Clay mineral containing kaolinite, illite and montmorillonite was organofunctionalized with silylating agents: (3-aminopropyl)triethoxysilane, 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane and (3-mercaptopropyl)trimethoxy-silane, to yield three hybrids labelled Clay1, Clay2 and Clay3, respectively. These solids were characterized using elemental analysis, thermogravimetry, X-ray diffractometry, infrared spectroscopy, scanning electron micrograph, and ²⁹Si and ²⁷Al solid state NMR. Immobilized quantities of the organic groups were 0.66 mmol g^?1, 0.48 mmol g^?1 and 0.88 mmol g^?1 for Clayx (x = 1–3), respectively. X-ray diffraction patterns confirmed the immobilization of silanes onto the surface without changes in the textural properties of the clay mineral as noted from the SEM images. Spectroscopic measurements were in agreement with the covalent bonding between the silanes and the hydroxyl groups deposited on the surface. The new hybrids were utilized as adsorbents of cobalt in aqueous solution, with retention values of 0.78 mmol g^?1, 1.1 mmol g^?1 and 0.70 mmol g^?1 for Clayx (x = 1–3), respectively.     

Construction of a dimethyl sulfoxide sensor based on dimethyl sulfoxide reductase immobilized on a au film electrode.

A novel dimethyl sulfoxide (DMSO) sensor using DMSO reductase and film electrodes was constructed. The Au and Ag electrodes were fabricated on slide glass by vacuum deposition and the application of a photolithographic technique. The micro-chamber (4 x 50 x 1 mm, volume 200 microl) was fabricated on a poly(dimethylsiloxane) (PDMS) polymer. The Pt electrode was implanted in a PDMS polymer. DMSO reductase was immobilized on a Au film electrode with bovine serum albumin (BSA)-glutaraldehyde. This sensor could determine DMSO in an unpurged aqueous solution with glucose oxidase (GOD) and catalase (CAT) for oxygen removal. The DMSO sensor showed a linear response within 1 mM DMSO with a correlation coefficient of 0.999. The detection limit was 200 microM (3sigma), and the sensitivity was 23.8 mA M(-1) cm(-2). The relative standard deviations at each concentration were within 3.6%.     

Thermolysis of dimethyl sulfoxide

The thermal decomposition of dimethyl sulfoxide at small extent of reaction has been studied at temperatures of 297-350°C and pressures of 10–400 Torr. The major products CH₄, C₂H₄, and SO₂ were shown to follow first-order kinetics. The activation energies for production of each was about 48 kcal·mole^?1. A chain mechanism has been postulated in the light of the results of isotopic substitution experiments.     

Carbocation-forming reactions in dimethyl sulfoxide

Mesylate derivatives of 3-aryl-3-hydroxy-beta-lactams and thiolactams react in DMSO-d(6) by first-order processes to give alcohol products. Substituent effect studies implicate carbocation intermediates (ion-pairs) that are captured by DMSO-d(6) to give transient oxosulfonium ions. Rapid reaction of the oxosulfonium ions with trace amounts of water leads to the alcohol product and regenerates DMSO-d(6). H(2)(17)O labeling studies show that (17)O is incorporated into the DMSO. The mesylate derivatives of endo- and exo-2-hydroxy-2-phenylbicyclo[2.2.1]heptan-3-one also react in DMSO-d(6) to give the alcohol products. Ion-pair intermediates that capture DMSO giving unstable oxosulfonium ions are again proposed. Exo-2-phenyl-endo-bicyclo[2.2.1]heptyl trifluoroacetate readily eliminates trifluoroacetic acid in DMSO-d(6) via a cationic mechanism involving loss of the endo-trifluoroacetate leaving group as well as an exo-hydrogen. The O-methyl oxime derivative of alpha-chloro-alpha,alpha-diphenylacetophenone reacts in DMSO-d(6) to give 1-methoxy-2,3-diphenylindole, a product derived from cyclization of a cationic intermediate. A common ion rate suppression provides further evidence for a cationic mechanism. The triflate derivative of pivaloin reacts by a cationic mechanism in DMSO-d(6) to give rearranged products. The rate is even faster than in highly ionizing solvents such as trifluoroethanol or trifluoroacetic acid. 1-Adamantyl mesylate reacts in DMSO-d(6) by a first-order process (Y(OMs) = -4.00) to give a long-lived oxosulfonium ion, 1-Ad-OS(CD(3))(2)(+), which can be characterized spectroscopically. This oxosulfonium ion reacts only slowly with water at elevated temperatures to give 1-adamantanol. DMSO is therefore a viable solvent for k(s), k(C), and k(Delta) cationic processes.     

Preferential solvation of lysozyme by dimethyl sulfoxide in binary solutions of water and dimethyl sulfoxide

To reveal the denaturation mechanism of lysozyme by dimethyl sulfoxide (DMSO), thermal stability of lysozyme and its preferential solvation by DMSO in binary solutions of water and DMSO was studied by differential scanning calorimetry (DSC) and using densities of ternary solutions of water (1), DMSO (2) and lysozyme (3) at 298.15 K. A significant endothermic peak was observed in binary solutions of water and DMSO except for a solution with a mole fraction of DMSO (x ₂) of 0.4. As x ₂ was increased, the thermal denaturation temperature T _m decreased, but significant increases in changes in enthalpy and heat capacity for denaturation, ΔH _cal and ΔC _p, were observed at low x ₂ before decreasing. The obtained amount of preferential solvation of lysozyme by DMSO (∂g ₂/∂g ₃) was about 0.09 g g⁻¹ at low x ₂, indicating that DMSO molecules preferentially solvate lysozyme at low x ₂. In solutions with high x ₂, the amount of preferential solvation (∂g ₂/∂g ₃) decreased to negative values when lysozyme was denatured. These results indicated that DMSO molecules do not interact directly with lysozyme as denaturants such as guanidine hydrochloride and urea do. The DMSO molecules interact indirectly with lysozyme leading to denaturation, probably due to a strong interaction between water and DMSO molecules.     

Vinylation of pyrroles in dimethyl sulfoxide

A number of 1-vinylpyrroles were obtained in up to 97% yields by base-catalyzed addition of substituted pyrroles to acetylene in dimethyl sulfoxide at 80–100°C.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 213–214, February, 1977.     

Kinetics and mechanism of the oxidation of dimethyl sulfoxide by chloramine-T in hydrochloric and medium

The kinetics of oxidation of dimethyl sulfoxide (DMSO) by chloramine-T (CAT) in HCl medium obeys the rate law — d log [CAT]/dt=k[DMSO]^0.5[H⁺]. The active species in the oxidation is N-chloro-p-toluenesulfonamide. Chloride ion catalyzes the reaction. An order dependence of 1.7 on the gross concentration of HCl is obtained, indicating mixed order kinetics, with simultaneous catalysis by H⁺ and Cl^– ions.

---

(DMSO) -T (CAT) HCl . N----. . HCl 1,7, -, .. H⁺ Cl^–.

     

Cyclopolymerization of diallylamine derivatives in dimethyl sulfoxide

Diallyl quaternary ammonium chlorides, bromides and N-alkyldiallylamine hydrochlorides were polymerized with ammonium persulfate (APS) in dimethyl sulfoxide (DMSO). The dependences of yield and molecular weight of polymers on polymerization conditions were examined and quaternary ammonium chlorides were found to have better polymerizability than bromides. The poly(diallyl quaternary ammonium chlorides) obtained with APS—DMSO system are expected to have quite high molecular weights, as determined from the measurement of limiting viscosity numbers of the polymers in NaCl aqueous solution.     

Polymerization of vinylene carbonate in dimethyl sulfoxide

Pure vinylene carbonate polymerizes readily in dimethyl sulfoxide solutions upon initiation by azobisisobutyronitrile (AIBN). The monomer conversion is characterized by a limiting value which appears to be a function of the temperature and the initial concentrations of both the initiator and the monomer. Increasing both initiator concentration and temperature results in higher final conversions, whereas a maximum conversion is indicated for initial monomer concentrations in the range of 80% to 90%. Principal kinetic quantities were found to be adequately represented by the equations k_d = 24.3 × 10⁵ exp {?11300/RT} and k_p(f/k_t)^1/2 = 46.3 × 10⁵ exp {?8900/RT} for the temperature range of 50–80°C. The average degree of polymerization was found to be affected by chain transfer to the solvent. A value of 5.8 × 10^?4 was determined for the corresponding chain transfer constant.     

Base-catalyzed dehydration of aldoximes in dimethyl sulfoxide

Conclusions A convenient method is proposed for the alkaline dehydration of aldoximes into nitriles in the presence of KOH in dimethyl sulfoxide at 140°.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 690–691, March, 1976.     

Thermodynamic properties of resveratrol in dimethyl sulfoxide

In this article, the enthalpies of dissolution of resveratrol in dimethyl sulfoxide (DMSO) were measured using a RD496-2000 Calvet microcalorimeter at 298.15?K under atmospheric pressure. The differential enthalpy (??_dif H _m) and molar enthalpy (??_sol H _m) of dissolution of resveratrol in DMSO were determined, and the relationship between heat and the amount of solute was also established. Based on the thermodynamic and kinetic knowledge, the corresponding kinetic equation, half-life, ??_sol H _m, ??_sol S _m, ??_sol G _m, the relative partial molar enthalpy (??_sol H _m(partial)) and the relative apparent molar enthalpy (??_sol H _m(app)) of the dissolution process were obtained. The results showed that this study not only provided a simple method for the determination of the half-life for a drug, but also offered a theoretical reference for the clinical application of resveratrol.     

Synthesis of ZnO and TiO2 nanoparticles

We report on the synthesis of ZnO and TiO₂ nanoparticles by solution-phase methods, with a particular focus on the influence of experimental parameters on the kinetics of nucleation and coarsening. The nucleation rate of ZnO from the reaction between ZnCl₂ and NaOH in ethanol was found to increase with increasing precursor concentration, while the coarsening rate is independent of precursor concentration up to a threshold concentration. The nucleation rate of ZnO from Zn(OOC-CH₃)₂ and NaOH in n-alkanols was found to decrease with decreasing chain length, which is explained by the increase of the dielectric constant of the solvent. Due to the larger solubility of ZnO, nucleation is significantly slower than that observed in the case of TiO₂. TiO₂ nanoparticles coarsen according to the Lifshitz-Slyozov-Wagner model for Ostwald ripening. We also show that using amorphous titania as a base material, pure anatase and brookite nanoparticles can be synthesized.     

Nicotinamide solvation state in aqueous dimethyl sulfoxide

The solvation state of biologically active compound vitamin B₃, viz., 3-pyridinecarboxamide, in an aqueous-dimethyl sulfoxide solvent of a variable composition was studied by ¹H and ¹³C NMR and IR spectroscopy. Below X _DMSO ?0.65 molar fraction, the solvation of the N heteroatom due to hydrogen bonds with water molecules weakens. At X _DMSO > 0.65 molar fraction, almost no changes are observed in the solvate state of the N heteroatom. The ¹H NMR spectra indicate that the degree of conjugation of the carbamide group with the heterocycle increases with an increase in the DMSO concentration. The structures of the dimethyl sulfoxide and mixed aqueous-dimethyl sulfoxide solvates of nicotinamide were optimized by the B3LYP/6311++(DP) method, and their ¹³C chemical shifts (GIAO) and IR spectra were obtained. According to the IR spectroscopic data, the number of hydrogen bonds involving the carbamide group decreases on going from H₂O to DMSO.