单框架控制力矩陀螺输出特性分析

广泛用于航天领域的单框架控制力矩陀螺, 具有力矩放大效应的优点,其理论基础为有假设条件的力矩放大原理. 本文不局限于这些假设, 不限定工况,解析单框架控制力矩陀螺的输出特性. 考虑安装基座的运动,得到具有两维输入三维输出的单框架控制力矩陀螺力矩输出模型,提出将输出力矩分解为可调控与不可调控两部分. 为分析单框架控制力矩陀螺的输出特性,定义两个参数, 分别为输出输入力矩比和输出力矩利用率. 研究发现,单框架控制力矩陀螺不恒有力矩放大效应, 也不恒有高效的力矩利用率,两者与其状态密切相关. 最后,以含两个单框架控制力矩陀螺的航天器姿态机动任务为例,对非对角奇异鲁棒操纵控制和优化控制进行仿真,检验了单框架控制力矩陀螺输出特性对控制效果的影响. 同时,根据单框架控制力矩陀螺的三维输出特性, 借助一个单框架控制力矩陀螺的优化控制,实现了航天器的三轴姿态机动. 仿真结果显示, 在优化控制过程中,单框架控制力矩陀螺始终具有力矩放大效应和高效的力矩利用率.      

Combined control of fast attitude maneuver and stabilization for large complex spacecraft

In remote sensing or laser communication space missions, spacecraft need fast maneuver and fast stabilization in order to accomplish agile imaging and attitude tracking tasks. However, fast attitude maneuvers can easily cause elastic deformations and vibrations in flexible appendages of the spacecraft. This paper focuses on this problem and deals with the combined control of fast attitude maneuver and sta- bilization for large complex spacecraft. The mathematical model of complex spacecraft with flexible appendages and momentum bias actuators on board is presented. Based on the plant model and combined with the feedback controller, modal parameters of the closed-loop system are calculated, and a multiple mode input shaper utilizing the modal information is designed to suppress vibrations. Aiming at reducing vibrations excited by attitude maneuver, a quintic polynomial form rotation path planning is proposed with constraints on the actuators and the angular velocity taken into account. Attitude maneuver simulation results of the control systems with input shaper or path planning in loop are sepa- rately analyzed, and based on the analysis, a combined control strategy is presented with both path planning and input shaper in loop. Simulation results show that the combined control strategy satisfies the complex spacecraft＇s require- ment of fast maneuver and stabilization with the actuators＇ torque limitation satisfied at the same time.     

航天器太阳帆板振动抑制的输入整形方法研究

利用输入整形与PD(比例微分)控制相结合的主动振动控制策略,在保证航天器完成三轴姿态机动的同时抑制太阳帆板的振动。首先,基于角动量定律和拉格朗日法建立了带挠性太阳帆板航天器的动力学模型。然后,在动力学模型的基础上,采用PD控制作为航天器三轴姿态机动的控制策略,利用挠性太阳帆板各阶模态的固有频率和阻尼比得到系统的输入整形器,对原始姿态机动的脉冲进行输入整形前馈控制,以抑制太阳帆板各阶模态的振动。仿真结果表明:两种输入整形方法均能抑制太阳帆板的振动,ZV(零残余振动)输入整形器简单且脉冲数量少,输入时间较短,但对于参数摄动以及输入的微小误差比较敏感,抑制振动的效果难以满足零残余振动的标准;ZVD(微分零残余振动)输入整形器脉冲数量较多,具有一定量的延时,但更为高效,鲁棒性强,能够极大地抑制挠性太阳帆板的残余振动,缩短航天器的机动稳定时间,且整个机动过程更加平稳。     

Analytical solution of the optimal attitude maneuver problem with a combined objective functional for a rigid body in the class of conical motions

The optimal attitude maneuver control problem without control constraints is studied in the quaternion statement for a rigid body with a spherical mass distribution. The performance criterion is given by a functional combining the time and energy used for the attitude maneuver. A new analytical solution in the class of conical motions is obtained for this problem on the basis of the Pontryagin maximum principle.     

Chaotic attitude and reorientation maneuver for completely liquid-filled spacecraft with flexible appendage

The present paper investigates the chaotic attitude dynamics and reorientation maneuver for completely viscous liquid-filled spacecraft with flexible appendage. All of the equations of motion are derived by using Lagrangian mechanics and then transformed into a form consisting of an unperturbed part plus perturbed terms so that the system＇s nonlinear characteristics can be exploited in phase space. Emphases are laid on the chaotic attitude dynamics produced from certain sets of physical parameter values of the spacecraft when energy dissipation acts to derive the body from minor to major axis spin. Numerical solutions of these equations show that the attitude dynamics of liquid-filled flexible spacecraft possesses characteristics common to random, non- periodic solutions and chaos, and it is demonstrated that the desired reorientation maneuver is guaranteed by using a pair of thruster impulses. The control strategy for reorientation maneuver is designed and the numerical simulation results are presented for both the uncontrolled and controlled spins transition.     

Model predictive control of rigid spacecraft with two variable speed control moment gyroscopes

In this paper, an attitude maneuver control problem is investigated for a rigid spacecraft using an array of two variable speed control moment gyroscopes(VSCMGs)with gimbal axes skewed to each other. A mathematical model is constructed by taking the spacecraft and the gyroscopes together as an integrated system, with the coupling interaction between them considered. To overcome the singular issues of the VSCMGs due to the conventional torque-based method, the first-order derivative of gimbal rates and the second-order derivative of the rotor spinning velocity, instead of the gyroscope torques, are taken as input variables. Moreover, taking external disturbances into account,a feedback control law is designed for the system based on a method of nonlinear model predictive control(NMPC). The attitude maneuver can be realized fast and smoothly by using the proposed controller in this paper.     

含间隙铰接的柔性航天器刚柔耦合动力学与控制研究

大型柔性航天器展开锁定后,运动副中仍存在大量无法消除的间隙. 铰链间隙直接影响柔性航天器的姿态 运动和有效载荷的指向精度及稳定度,会对航天器的动力学特性造成较大的影响. 针对这一问题, 提出一种含间隙铰 接的航天器刚柔耦合动力学建模与控制方法. 首先建立含间隙的铰链精确动力学模型,从而构建含间隙铰接的柔性结构 动力学模型. 然后利用哈密顿原理和模态离散方法,建立含间隙铰接柔性航天器离散形式的刚柔耦合非线性动力学 模型,采用 Newmark 算法对非线性动力学方程进行求解. 基于压电纤维复合材料 (macro fiber composite, MFC) 驱动器 构建航天器的刚-柔-电耦合动力学方程,采用最优控制设计控制律. 分析了铰链参数、中心刚体转动惯量、间隙尺寸和间隙数目对航天器动力学特性的影响,着重研究了铰链间隙对航天器姿态运动和结构振动的影响作用. 最后采用 MFC 驱动器对航天器施加主动控制. 结果表明,铰链参数和中心刚体转动惯量影响航天器的固有频率;随着铰链间隙尺寸的增大及间隙数目的增多,航天器的整体刚度逐渐减小,而航天器的姿态角和振动位移响应不断增大;通过基于 MFC 的主动控制,能够实现含间隙铰接航天器姿态运动与结构振动的协同控制,并缓解间隙对系统动态特性造成的影响.      

局部可观测理论在惯导系统快速传递对准中的应用

鉴于传统的全局可观测理论很难定量分析时变系统的可观测性,从机载导弹传递对准姿态角误差的可观测性出发,首次将局部可观测性理论应用于"速度 姿态"匹配的快速传递对准中。将条件数的概念引入局部可观测矩阵,定量地计算出在三种不同机动方式下,局部可观测矩阵的条件数,用以表征机动对准过程中系统的局部可观测度。仿真结果证明,提高姿态角误差可观测度的最佳载体机动方式为机翼摇摆运动。该研究结果为实现机载武器动基座快速精确对准技术在工程中的应用提供了依据。     

DYNAMICS AND CONTROL OF RIGID-FLEXIBLE COUPLING FLEXIBLE SPACECRAFT WITH JOINT CLEARANCE1)

大型柔性航天器展开锁定后,运动副中仍存在大量无法消除的间隙. 铰链间隙直接影响柔性航天器的姿态 运动和有效载荷的指向精度及稳定度,会对航天器的动力学特性造成较大的影响. 针对这一问题, 提出一种含间隙铰 接的航天器刚柔耦合动力学建模与控制方法. 首先建立含间隙的铰链精确动力学模型,从而构建含间隙铰接的柔性结构 动力学模型. 然后利用哈密顿原理和模态离散方法,建立含间隙铰接柔性航天器离散形式的刚柔耦合非线性动力学 模型,采用 Newmark 算法对非线性动力学方程进行求解. 基于压电纤维复合材料 (macro fiber composite, MFC) 驱动器 构建航天器的刚-柔-电耦合动力学方程,采用最优控制设计控制律. 分析了铰链参数、中心刚体转动惯量、间隙尺寸和间隙数目对航天器动力学特性的影响,着重研究了铰链间隙对航天器姿态运动和结构振动的影响作用. 最后采用 MFC 驱动器对航天器施加主动控制. 结果表明,铰链参数和中心刚体转动惯量影响航天器的固有频率;随着铰链间隙尺寸的增大及间隙数目的增多,航天器的整体刚度逐渐减小,而航天器的姿态角和振动位移响应不断增大;通过基于 MFC 的主动控制,能够实现含间隙铰接航天器姿态运动与结构振动的协同控制,并缓解间隙对系统动态特性造成的影响.     

大型柔性航天器动力学与振动控制研究进展

随着航天重大工程的逐步实施,航天器正朝着超高速、超大尺度、多功能的方向发展,其面临的发射和运行环境也更加恶劣.航天器发射过程中的振动及其主/被动控制、在轨运行中大型柔性航天器动力学建模与动态响应分析、结构振动与飞行器姿态的混合控制等问题越来越复杂且难于处理;航天器结构的大型化和柔性化(如大阵面天线和太阳翼等)也对其地面试验和半实物仿真提出了挑战.本文着重介绍大型柔性航天器涉及到的动力学与振动控制问题,包括航天器发射过程中的整星隔振,大型柔性结构动力学建模与振动响应分析,大型柔性航天器的结构振动与姿轨控耦合动力学及其混合控制等.提炼出航天动力学与控制领域中亟待解决的若干基础科学问题,包括:多刚柔体系统动力学建模与模型降阶(涉及大变形柔性体动力学建模、多求解器合作仿真、模型降阶、组合结构动力学建模的解析方法等);复杂结构状态空间模型构建方法与能控性(涉及状态空间模型构建的理论与实验方法、复杂结构振动控制系统的能观性与能控性等);航天器姿态运动与大型柔性结构振动的混合控制律设计(涉及姿态机动与结构振动的鲁棒混合控制、执行机构与压电控制器的协同控制等).      

一类带柔性附件充液航天器姿态机动控制

基于Lyapunov稳定性理论研究了用动量轮控制一类带轻质悬臂梁附件的充液航天器的姿态机动控制问题, 其中晃动液体用黏性力矩球摆模型代替, 悬臂梁附件用若干集中质量代替. 用动量矩定理和Lagrange方程分别推导得到航天器主刚体、等效球摆、等效集中质量的动力学方程, 所用反馈控制律包含了与动量轮角加速度密切相关的权重因子, 利用系统初、终状态和到达最终姿态所需时间解析确定此权重因子. 同时利用Lyapunov稳定性理论得到了实现最终姿态机动的稳定性判据. 数值仿真表明所用控制律的有效性, 分析附件的相对主刚体平面的转角、相对系统质心的高度、长度、刚度、质量、阻尼系数和到达最终姿态所需时间等因素对控制过程中航天器剩余章动角的影响大小.      

MODEL OF CENTRIFUGAL EFFECT AND ATTITUDE MANEUVER STABILITY OF A COUPLED RIGID-FLEXIBLE SYSTEM

IntroductionThedynamicandcontrolofcoupledrigid_flexiblesystemisaleading_edgeresearchsubjectthathasdrawnextensiveattentionfromtheacademiccommunityintheworld[1].TheresearchconductedbyKaneetal.in 1 987[2 ]suggestedthat,thetraditionalmodelapplyingstructuraldynamicsassumptionaboutelasticdeformationindiscriminately[3,4 ],ineffect,hasneglectedtheso_called“dynamicstiffening”effectresultedfromcoupledrigid_flexiblesystem .Therefore ,itisofparticularimportancetoresearchtheactionofcoupledrigid_flexibles…     

采用动量轮及推进器的微小卫星的姿态机动控制(英文)

提出了一种利用偏置动量轮及推进器实现大角度姿态机动控制的方法。首先建立轨道系下的卫星模型及动量轮推进器的模型,并基于该模型采用动量轮及推进器结合的反馈线性化控制方法,最后设计了大角度机动的参考轨迹。仿真和分析结果表明,文中的控制方法可以在45 s内使卫星机动40°,并在100 s内达到180°大角度,控制精度达到0.4°。可以无需对动量轮进行加减速操作而进行实时的姿态机动。不仅能满足实时性需要,同时可以避免动量轮饱和,降低能源消耗,为微小卫星姿态控制系统的工程实现提供了非常有价值的参考。     

Attitude maneuver of liquid-filled spacecraft with a flexible appendage by momentum wheel

Attitude maneuver of liquid-filled spacecraft with an appendage as a cantilever beam by momentum wheel is studied.The dynamic equations are derived by conservation of angular momentum and force equilibrium principle.A feedback control strategy of the momentum wheel is applied for the attitude maneuver.The residual nutation of the spacecraft in maneuver process changes with some chosen parameters,such as steady state time,locations of the liquid container and the appendage,and appendage parameters.The results indicate that locations in the second and fourth quadrants of the body-fixed coordinate system and the second quadrant of the wall of the main body are better choices for placing the liquid containers and the appendage than other locations if they can be placed randomly.Higher density and thicker cross section are better for lowering the residual nutation if they can be changed.Light appendage can be modeled as a rigid body,which results in a larger residual nutation than a flexible model though.The residual nutation decreases with increasing absolute value of the initial sloshing angular height.     

多储液腔航天器刚液耦合动力学与复合控制

采用复合控制方法对充液航天器的姿态和轨道机动进行高精度控制.通过傅里叶-贝塞尔级数展开法,将低重力环境下液体的弯曲自由表面的动态边界条件转化为简单的微分方程,其中耦合液体晃动方程的状态向量由相对势函数的模态坐标和波高的模态坐标组成.通过广义准坐标下的拉格朗日方程得到航天器刚体部分运动和液体燃料晃动的耦合动力学方程,提出了自适应快速终端滑模策略和输入整形技术相结合的复合控制器,并分别用于控制携带有一个燃料腔和四个燃料腔航天器的轨道机动和姿态机动.通过数值模拟来验证控制器的效率和精度.结果表明,对于多储液腔航天器,如果在设计航天器的姿态和轨道控制器时没有充分考虑燃料晃动效应,那么在受控航天器系统中将会出现刚-液-控耦合问题并导致航天器姿态不稳定.而本研究中的复合自适应终端滑模控制器可以实现航天器机动的高精度控制并有效抑制液体燃料晃动.     

Sliding mode maneuvering control and active vibration damping of three-axis stabilized flexible spacecraft with actuator dynamics

This paper presents a dual-stage control system design method for the three-axis-rotational maneuver control and vibration stabilization of a spacecraft with flexible appendages embedded with piezoceramics as sensor and actuator. In this design approach, the attitude control system and vibration suppression were designed separately using a lower order model. Based on the sliding mode control (SMC) theory, a discontinuous attitude control law in the form of the input voltage of the reaction wheel is derived to control the orientation of the spacecraft actuated by the reaction wheel, in which the reaction wheel dynamics is also considered from the real applications point of view. The asymptotic stability is shown using Lyapunov analysis. Furthermore, an adaptive version of the proposed attitude control law is also designed for adapting the unknown upper bounds of the lumped disturbance so that the limitation of knowing the bound of the disturbance in advance is released. In addition, the concept of varying the width of boundary layer instead of a fixed one is also employed to eliminate the chattering and improve the pointing precision as well. For actively suppressing the induced vibration, modal velocity feedback and strain rate feedback control methods are presented and compared by using piezoelectric materials as additional sensors and actuators bonded on the surface of the flexible appendages. Numerical simulations are performed to show that rotational maneuver and vibration suppression are accomplished in spite of the presence of disturbance torque and parameter uncertainty.     

机动对速度匹配法传递对准效果的影响

传递对准过程中,机动运动有利于改善对准效果,不同的机动运动方式对特定匹配模式下的对准效果改善程度不同。通过建立速度匹配法传递对准卡尔曼滤波器模型,对几种典型机动方式下的模型分别进行深入仿真研究,详细比较不同机动方式对捷联惯导系统对准效果的影响。仿真结果表明,采用速度匹配传递对准方式,载体单独做摇摆加线运动姿态误差角估计精度能达到1',陀螺常值漂移的估计精度能达到90%,加速度计常值零偏无法估计。载体做"S"形机动运动姿态误差角估计精度优于0.5',陀螺常值漂移的估计精度能达到95%以上,加速度计常值零偏估计精度能达到99%。     

Robust adaptive sliding mode attitude maneuvering and vibration damping of three-axis-stabilized flexible spacecraft with actuator saturation limits

This paper presents a dual-stage control system design method for flexible spacecraft attitude maneuvering control by use of on-off thrusters and active vibration suppression by embedded smart material as actuator. As a stepping stone, an adaptive sliding mode controller with the assumption of knowing the upper bounds of the lumped perturbation is designed that ensures exponential convergence or uniform ultimate boundedness (UUB) of the attitude control system in the presence of bounded parameter variation/disturbances and control input saturation as well. Then this adaptive controller is redesigned such that the need for knowing the upper bound in advance is eliminated. Lyapunov analysis shows that this modified adaptive controller can also guarantee the exponential convergence or UUB of the system. For actively suppressing the induced vibration, linear quadratic regulator (LQR) based positive position feedback control method is presented. Numerical simulations are performed to show that rotational maneuver and vibration suppression are accomplished in spite of the presence of disturbance torque/parameter uncertainty and saturation input.     

AIRSHIP ATTITUDE TRACKING SYSTEM

The attitude tracking control problem for an airship with parameter uncertainties and external disturbances was considered in this paper. The mathematical model of the airship attitude is a multi-input/multi-output uncertain nonlinear system. Based on the characteristics of this system, a design method of robust output tracking controllers was adopted based on the upper-bounds of the uncertainties. Using the input/output feedback linearization approach and Liapunov method, a control law was designed, which guarantees that the system output exponentially tracks the given desired output. The controller is easy to compute and complement. Simulation results show that, in the closed-loop system, precise attitude control is accomplished in spite of the uncertainties and external disturbances in the system.     

XNAV/UVNAV/SINS组合导航在航天器轨道机动中的应用

针对X射线脉冲星导航在航天器轨道机动过程中精度不高甚至发散的问题,提出一种将X射线脉冲星导航结合惯性导航和紫外敏感器的组合导航方法。以航天器在惯性系中的位置、速度、姿态四元数和惯性导航设备误差作为系统状态变量,用X射线探测器测量X射线脉冲到达时间,用紫外敏感器测量中心天体质心相对于航天器的方向矢量和距离以及航天器在惯性系中的姿态四元数,用扩展卡尔曼滤波器估计组合导航系统状态。仿真结果验证了该组合导航方法的可行性,能够解决轨道机动中X射线脉冲星单独导航的误差过大(位置误差达107m)问题,且该组合导航具有较高的导航精度,在轨道机动前、机动中和机动后导航位置误差均在100 m以内。