Palladium(II) chloride/EDTA-catalyzed biaryl homo-coupling of aryl halides in aqueous medium in the presence of ascorbic acid

Both electron-deficient and electron-rich aryl bromides undergo biaryl homo-coupling in a basic aqueous-ethanolic medium in the presence of PdCl₂-EDTA (1:1 molar ratio, 3 mol %) as catalyst and ascorbic acid as reductant (1 mol equiv) in acceptable to good yields.     

Diastereoselective synthesis of 2-fluoroaziridine-2-carboxylates by Reformatsky-type aza-Darzens reaction

The reaction of ethyl dibromofluoroacetate with imines using zinc metal gave 2-fluoroaziridine-2-carboxylates via aza-Darzens reaction of the primary product of the Reformatsky reaction with high diastereoselectivity in excellent yields (quantitative yield and Dr = 85:15). This chemoselective formation of 2-fluoroaziridines was achieved by using CH₃CN as a solvent. Interestingly, the reaction proceeded without activation of zinc metal, which was necessary for the Reformatsky reaction of bromodifluoroacetate. None of α-bromo-α-fluoro-β-lactams, four-membered cyclization products, and noncyclized 3-amino-2-bromo-2-fluorocarboxylic esters, usual Reformatsky adducts, were formed.     

Highly enantioselective addition of linear alkyl alkynes to linear aldehydes

It is discovered that the use of biscyclohexylamine (Cy₂NH) as an additive can greatly enhance the enantioselectivity for the reaction of linear alkyl alkynes with linear aldehydes. The combination of (S)-BINOL (20 mol %), Cy₂NH (5 mol %), ZnEt₂ (2 equiv), and Ti(OⁱPr)₄ (0.5 equiv) catalyzes the reaction at room temperature in diethyl ether solution with 81-89% ee and 57-77% yield.     

Ligand-free, atom-efficient Suzuki-Miyaura type cross-coupling reactions at room temperature

The atom-efficient cross-coupling reaction of sodium tetraarylborates with aryl iodides and bromides was reported. The reaction can be performed directly using a catalytic system composed of palladium chloride, sodium carbonate and methanol (PdCl₂/Na₂CO₃/MeOH) under heat-free conditions at room temperature in an open air conditions. The reactions carried out in an atom-efficient way as 4 equiv of aryl halides coupled effectively with 1 equiv of sodium tetraarylborates to furnish 4 equiv of the corresponding functionalized biaryls in good to excellent yields.     

Deprotonation of chloropyridines using lithium magnesates

4-Chloropyridine was deprotonated on treatment with 1/3 equiv of the highly coordinated magnesate Bu₃(TMP)MgLi₂ in THF at −10 °C, as evidenced by trapping with I₂. The use of Bu(TMP)₂MgLi in Et₂O allowed the reaction of 2-chloropyridine, giving the 3-functionalized derivative as the main product. Mixtures of 3- and 4-functionalized derivatives were obtained when 2,6-dichloropyridine was involved in the reaction. Performing the reaction on 3-chloropyridine with lithium magnesates in THF, either the 4,4′-dimer or the 4-iodo derivative was formed after quenching by I₂, the former using 1/3 equiv of Bu₂(TMP)MgLi and the latter using 1 equiv of (TMP)₃MgLi. Similar results were observed with 3,5-dichloropyridine, 2,5-dichloropyridine and 3-chloro-2-fluoropyridine. 1,2-Migration of the lithium arylmagnesate formed by deprotonation was proposed to justify the dimers formation.     

Palladium catalyzed atom-efficient cross-coupling reactions of triarylbismuths with aryl bromides

Aryl bromides (3 equiv) were coupled efficiently with triarylbismuths (1 equiv) in an atom-efficient way using the Pd(OAc)₂/PPh₃ catalytic system in the presence of K₃PO₄ as base in DMF at 90 °C, providing excellent yields of the cross-coupled biaryls in short reaction times.     

gem-Difluoropropargylation of aldehydes using cat. In/Zn in aqueous media

Zn (0.9 equiv) in combination with catalytic amounts of In (0.1 equiv) and I₂ (0.1 equiv) was found to effect the reaction of several difluoropropargyl bromide derivatives with aldehydes to produce gem-difluorohomopropargyl alcohols in aqueous media under conditions suitable for large scale applications.     

An atom-efficient palladium-catalyzed cross-coupling reaction of triarylbismuths with acid chlorides: synthesis of diaryl and alkyl aryl ketones

The cross-coupling reaction of triarylbismuths with acid chlorides using a catalytic amount of PdCl₂/PPh₃ afforded the corresponding ketones in high yields. The reactions of aromatic and aliphatic acid chlorides occurred with atom efficiency, as 3 equiv of acid chlorides coupled effectively with 1 equiv of triarylbismuths to yield 3 equiv of the corresponding diaryl and alkyl aryl ketones.     

Sonogashira coupling with aqueous ammonia directed to the synthesis of azotolane derivatives

Sonogashira coupling with aqueous ammonia is tolerable for the reaction of aryl iodides or terminal alkynes bearing an azobenzene group. The reaction of (4-heptyloxyphenyl)ethyne with (4-heptyloxyphenyl)-(4-iodophenyl)diazene in the presence of 1 mol% of PdCl₂(PPh₃)₂, 2 mol% of CuI, and 2 equiv of 0.5 M aqueous ammonia gives the corresponding azotolane in 87% isolated yield after stirring at room temperature for 15 h.     

Synthesis and characterisation of titanium pyridine- and pyrimidine-thiolates and their application as precursors to titanium disulfide

The reaction of TiCl₄ with pyridine- and pyrimidine-thiol has been investigated. Reaction of TiCl₄ with 3 equiv. of 2-mercaptopyridine and 3 equiv. of tert-butylpyridine in toluene at room temperature resulted in the formation of the tris(pyridine-2-thiolate) complex [TiCl(SC₅H₄N)₃] (1). The related reaction between TiCl₄ with 3 equiv. of 2-mercaptopyrimidine and 3 equiv. of tert-butylpyridine in toluene at room temperature resulted in the isolation of the complex [TiCl(SC₄H₃N₂)₃] (2). Compound 2 has been characterised by X-ray crystallography. Low pressure CVD of 1 and 2 produced brown/gold films of TiS₂/TiO₂ on glass substrates at 550 and 600 °C.     

Synthesis of α-aminonitriles under mild catalytic,metal-free conditions

α-Aminonitriles have been synthesized by a Strecker synthesis from aldehydes and ketones under mild catalytic, metal-free conditions. Aromatic aldehydes (1 equiv) were reacted with aromatic and 1° or 2° aliphatic amines (1 equiv) in EtOH containing 3 mol % of NH₄Cl to give high yields of α-aminonitriles. An alternative to adding NH₄Cl as a catalyst involved the use of excess TMSCN (1 equiv) and to promote the process. The reaction was also successful under microwave conditions using excess TMSCN with no solvent. Ketones similarly reacted with aromatic amines and excess TMSCN under conventional and microwave heating, but 30 mol % of added NH₄Cl was required for optimum conversion.     

One-pot synthesis of 1,4-diarylsubstituted 1,3-diynes from the sequential coupling reactions of aryl iodides and propiolic acid

1,4-Disubstituted 1,3-dialkynes were obtained from the one-pot palladium/copper-catalyzed coupling reactions of aryl iodide and propiolic acid. The optimized catalytic system consisted of 5.0 mol % Pd(PPh₃)₂Cl₂, 10 mol % dppb, 10 mol % CuI, 2.4 equiv of DBU, and 1.2 equiv of K₂CO₃. The coupling reaction was carried out at 30 °C for 6 h and subsequently at 80 °C for 3 h.     

Barium bis(5,5-dimethyl-1,1,1-trifluorohexane-2,4-dionate)(crown-ether) complexes: Synthesis,characterization and crystal structure

The preparation of the barium β-diketonate complexes with crown-ethers [Ba(pta)₂(18-crown-6)] (1), [Ba(pta)₂(18-crown-6)] (THF) (2), [Ba(pta)₂(18-dibenzocrown-6)](C₆H₅CH₃) (3), [Ba(pta)₂(18-dibenzocrown-6)] (4) (pta = 1,1,1-trifluoro-5,5-dimethylhexanedionato-2,4; 18-crown-6 = 1,4,7,10,13,16-hexaoxacyclooctadecane; 18-dibenzocrown-6 = 6,7,9,10,17,18,20,21-octahydrodibenzo[b,k][1,4,7,10,13,16]-hexaoxacyclooctadecane) is described. The complexes 1 and 2 have been synthesized from reaction of metallic barium with 2 molar equiv. of Hpta and 1 molar equiv. of 18-crown-6 in toluene; the complexes 3 and 4 from reaction of Ba(OH)₂·8H₂O with 1 molar equiv. 18-dibenzocrown-6 and 2 molar equiv. Hpta. The complexes were characterized by elemental analyses, IR-spectroscopy, ¹H NMR spectroscopy. The crystal structures of 2 and 3 were determined by means of single-crystal X-ray diffraction methods. A single-crystal X-ray study of 2 and 3 has shown it be monomeric. The coordination number of Barium cation in 2 and 3 is nine owing to nine oxygen atoms from two pta ligands and crown-ether molecule.     

Tandem catalysis in ionic liquids: a recyclable catalytic synthesis of benzofuran derivatives

A convenient, recyclable catalytic synthesis of benzofuran-2-acetic esters 2 by sequential Pd(0)-catalyzed deallylation—Pd(II)-catalyzed carbonylative heterocyclization of 1-(2-allyloxyphenyl)-2-yn-1-ols 1 in ionic liquids is presented. Reactions were typically carried out in BmimBF₄ as the solvent at 100 °C and under 30 atm of CO, in the presence of catalytic amounts (1 mol %) of PdI₂ in conjunction with KI (1 equiv), PPh₃ (4 mol %), MeOH (28 equiv), and H₂O (2 equiv). The solvent-catalyst system could be recycled several times without appreciable loss of catalytic activity.     

Facile nucleophilic fluorination by synergistic effect between polymer-supported ionic liquid catalyst and tert-alcohol reaction media system

A highly efficient method was developed for nucleophilic fluorination using an alkali metal fluoride through the synergistic effect of the polymer-supported ionic liquid (PSIL) as a catalyst and tert-alcohol as an alternative reaction media. This PSIL/tert-alcohol system not only enhances the reactivity of alkali metal fluorides and reduces the formation of by-products but also allows the use of a polymer-supported catalyst protocol. As an example, the nucleophilic fluorinations of the model compound, 2-(3-bromopropoxy)naphthalene, with CsF using only tert-amyl alcohol as solvent (for 2 h reaction time), 0.5 equiv of PS[hmim][BF₄] in CH₃CN (for 12 h reaction time), and 0.5 equiv of PS[hmim][BF₄] in tert-amyl alcohol (which is a PSIL/tert-alcohol system for the synergistic effect; for 2 h reaction time) provided 18, 40, and 84% yield, respectively. The characteristics of the nucleophilic fluorination reactions of some halo- and alkanesulfonyloxyalkane systems to the corresponding fluoroalkanes using various alkali metal fluorides are also reported.     

Some phosphinite complexes of Rh and Ir, their intramolecular reactivity and DFT calculations about their application in biphenyl metathesis

Biphen(OPR₂) (with R: Ph, iPr, Cy) is reacted with [Rh(COE)₂Cl]₂. The corresponding μ-chloro-bridged dimers are received. An X-ray analysis of [Biphen(OPCy₂)RhCl]₂ is included. This compound shows a dynamic behaviour in solution, ascribed to a monomer/dimer equilibrium. The difference of the Biphen ligands to Milsteins PCP pincer-type ligand is shown. A catalytic cycle for biphenyl metathesis containing the coupling of oxidative addition and reductive elimination of the bridging C-C single bond in the biphenyl fragment using Rh^I/III complexes and the concept of chelating assistance was calculated using DFT (B3PW91/LANL2DZ). According to the calculations the activation energy of the oxidative addition is about 30 kcal/mol and for the reductive elimination about 19 kcal/mol. The fac-Rh^III complex is by far the most stable compound, but the formation of it is kinetically strongly disfavoured. Pre-catalysts (COD)M(Ph-O-PR₂) (M: Rh, Ir) were synthesized by pre-coordinating the phosphinite to the metal (X-ray structures of four such compounds included) followed by treatment with 2 equiv. of sec. BuLi (X-ray structures of two such compounds included). In case of Ir this synthesis is complicated by C-H activation (X-ray structure of (COD)Ir(H)(Cl)(2-Br-phenyl-O-(diisopropylphosphinite)) included) and fast oxidative addition of the Ph-C-Halide bond. For (COD)Ir(H)(Cl)(2-phenyl-O-(diisopropylphosphinite)) the C-H activation is reversible and thermodynamic parameters for the ring closure reaction were determined by VT-NMR measurement (ΔH = −21.1 ± 0.5 kJ/mol, ΔS = −62.8 ± 1.7 J/(mol K)). The pre-catalysts were reacted with Biphen(OPR₂) to enter the calculated catalytic cycle. With Rh as center metal this reaction works out cleanly to give new complexes with the three P-atoms coordinated to one Rh center. No hemi-labile character was found for these P-donors even at 105 °C in toluene. If (COD)Rh(2-phenyl-O-(diisopropylphosphinite)) is reacted with 2 equiv. of 2-iodo-phenyl-O-(diisopropylphosphinite) oxidative addition of one C-Iodo bond is observed and the corresponding mer-Rh^III complex is received. Upon treatment with 2 equiv. of sec. BuLi the resulting product is(Biphen(OPiPr₂))Rh^I(2-phenyl-O-(diisopropylphosphinite)) rather than mer-Rh^III(2-phenyl-O-(diisopropylphosphinite))₃. Reaction of [Rh(COD)Cl]₂ with 3 equiv. of 2-bromo-phenyl-O-(diphenylphosphinite) shows a fast scrambling of the chlorine into all possible ortho positions of the phenolate rings in the final Rh^III reaction product.     

Deprotonation of furans using lithium magnesates

Furan was deprotonated on treatment with 1/3 equiv of Bu₃MgLi in THF at rt. The lithium arylmagnesate formed was either trapped with electrophiles or involved in a palladium-catalyzed cross-coupling reaction with 2-bromopyridine. The highly coordinated magnesate Bu₄MgLi₂ (1/3 equiv) proved to be a better deprotonating agent than Bu₃MgLi; the monitoring of the reaction using NMR spectroscopy showed that the deprotonation of furan at rt required 2 h whereas the subsequent electrophilic trapping was instantaneous. The method was extended to benzofuran, allowing its functionalization at C2 in high yields. The deprotonation of 2-methylfuran and lithium furfurylalkoxide at C5 turned out to be difficult, requiring either long reaction times or higher temperatures.     

Deprotonation of fluoro aromatics using lithium magnesates

3-Fluoropyridine was deprotonated on treatment with 1/3 equiv of Bu₃MgLi in THF at −10 °C. The lithium arylmagnesate formed was either trapped with electrophiles or involved in a palladium-catalyzed cross-coupling reaction with 2-bromopyridine. The use of a less nucleophilic lithium-magnesium-dialkylamide, (TMP)₃MgLi, allowed the reaction of 3-fluoroquinoline, giving the 2,2′-dimeric derivative. 2-Fluoropyridine and 2,6-difluoropyridine were deprotonated using 1/3 equiv of the highly coordinated magnesate Bu₄MgLi₂ in THF at −10 °C in the presence of a substoichiometric amount of 2,2,6,6-tetramethylpiperidine. 1,3-Difluorobenzene reacted similarly when treated with Bu₃MgLi; the reactivity of the base proved to be enhanced by the presence of TMEDA.     

Selective enhancement effects of silver salts on the transition metal-catalyzed synthesis of gem-difluorinated heterocyclics using 2,2-difluorohomopropargyl amides

The addition of silver salts had an effect on the catalyst activity in the Pd(0)-catalyzed cyclization-coupling tandem reaction, as well as in the Rh(I)-catalyzed Pauson-Khand reaction. The cationic palladium complex generated from Pd(PPh₃)₄ (2.5 mol%) with AgSbF₆ (1.5 equiv.) activates the triple bond of 2,2-difluoropropargylic amides to give the 4,5-disubstituted 3,3-difluoro-γ-lactams, through a sequential 5-endo-dig cyclization and cross-coupling reaction. The γ-lactam was transformed into ring-opened monofluorovinylic compounds after silica-gel chromatography. Pauson-Khand reaction of fluorinated 1,7-enyne amides using catalytic amounts of [Rh(COD)₂]₂ (5 mol%) and AgOTf (20 mol%) gave the corresponding gem-difluorinated bicyclic lactam.     

Microwave-assisted synthesis of 2-aminonicotinic acids by reacting 2-chloronicotinic acid with amines

2-(Methylamino)nicotinic acid was readily prepared in high yield by reacting 2-chloronicotinic acid with 40% aq MeNH₂ under microwave irradiation either at 120 °C for 2 h or at 140 °C for 1.5 h. Subsequently, we found that a range of 2-aminonicotinic acids could be obtained under microwave heating. The optimal reaction conditions involved the use of 3 equiv of amine, water as the solvent and heating at 200 °C for 2 h in the presence of diisopropylethylamine (3 equiv).