N2 Activation in NiI–NN–NiI Units: The Influence of Alkali Metal Cations and CO Reactivity

After single electron reduction of the dinitrogen complex [L^tBuNi(μ‐η¹:η¹‐N₂)NiL^tBu] ( I ) with KC₈, reaction of the resulting compound K[L^tBuNi(μ‐η¹:η¹‐N₂)NiL^tBu] ( II ) with sodium sand yields KNa[L^tBuNi(μ‐η¹:η¹‐N₂)NiL^tBu] ( 1 ), which contains two different alkali metal ions. Treatment of I with two equivalents of sodium sand leads to the symmetric complex Na₂[L^tBuNi(μ‐η¹:η¹‐N₂)NiL^tBu] ( 2 ). Complexes 1 and 2 were investigated by single crystal X‐ray diffraction analysis as well as by Raman spectroscopy, and the results were compared with the data of K₂[L^tBuNi(μ‐η¹:η¹‐N₂)NiL^tBu] ( III ), which contains two K⁺ ions. Thus, it became obvious that the nature of the alkali metal ion M in compounds M₂[L^tBuNi(μ‐η¹:η¹‐N₂)NiL^tBu] has hardly any influence on the degree of NN bond activation. Furthermore, it was shown that treatment of the dinickel(I) complex III with CO leads to the dinickel(0) compound K₂[L^tBuNi(CO)]₂ ( 4 ) and N₂. Reaction of the unreduced dinickel(I) complex I with CO leads to a more simple replacement of the N₂ ligand and formation of [L^tBuNi(CO)] ( 3 ).     

Syntheses and structures of zinc and tin(II) compounds with hemilabile N-silyl-tert-butylamido and N-silyl-p-tolylamido ligands that contain pendent tert-butoxy groups

Syntheses and solid-state structures of zinc and tin(II) compounds, containing the N-silyl-amide ligands (O^tBu)(NR)SiMe₂, R = ^tBu (L^tBu), or R = p-tolyl (L^pTol), are reported. The N-silyl amines were synthesized by modified published procedures from commercially available Me₂SiCl₂, ^tBuOH, and ^tBuNH₂, or p-Me-C₆H₄NH₂, respectively. Treatment of SnCl₂ with LiL^pTol furnished Sn(L^pTol)₂, which was X-ray structurally characterized and shown to contain two covalent Sn-N bonds and two asymmetrical O → Sn donor bonds. The single-crystal X-ray structure of Sn(L^tBu)₂ revealed a much more symmetrically-coordinated, pseudo-trigonal-bipyramidal tin atom. Aminolysis of diethylzinc with HL^pTol produced [EtZn(L^pTol)]₂, which crystallized as a centrosymmetric dimer, containing four-coordinate zinc atoms connected by bridging amides. Zinc dichloride, by contrast, reacted with two equivalents of LiL^tBu to produce the homoleptic, pseudo-spirocyclic Zn(L^tBu)₂.     

Lanthanide(II) Complexes of the Dihydrotriazinido Ligand [N{C(Ph)=N}2C(tBu)Ph]−

The potassium dihydrotriazinide K(L^Ph,tBu) ( 1 ) was obtained by a metal exchange route from [Li(L^Ph,tBu)(THF)₃] and KOtBu (L^Ph,tBu = [N{C(Ph)=N}₂C(tBu)Ph]). Reaction of 1 with 1 or 0.5 equivalents of SmI₂(thf)₂ yielded the monosubstituted Sm^II complex [Sm(L^Ph,tBu)I(THF)₄] ( 2 ) or the disubstituted [Sm(L^Ph,tBu)₂(THF)₂] ( 3 ), respectively. Attempted synthesis of a heteroleptic Sm^II amido‐alkyl complex by the reaction of 2 with KCH₂Ph produced compound 3 due to ligand redistribution. The Yb^II bis(dihydrotriazinide) [Yb(L^Ph,tBu)₂(THF)₂] ( 4 ) was isolated from the 1:1 reaction of YbI₂(THF)₂ and 1 . Molecular structures of the crystalline compounds 2 , 3· 2C₆H₆ and 4· PhMe were determined by X‐ray crystallography.     

Synthesis and characterisation of two novel Rh(I) carbene complexes: Crystal structure of [Rh(acac)(CO)(L1)]

The [Rh(acac)(CO)(L)] (acac = acetylacetonato; L₁ = 1,3-bis-(2,6-diisopropylphenyl)imidazolinylidene and L₂ = 1,3-bis-(2,4,6-trimethylphenyl)imidazolinylidene) complexes were prepared by the action of the parent carbene on [Rh(acac)(CO)₂] in THF. The crystal structure characterisation of [Rh(acac)(CO)(L₁)] revealed a slightly distorted square planar geometry with the carbene ligand orientated almost perpendicular to the equatorial plane; an elongated trans Rh-O bond of 2.0806(18) Å reflecting the considerable trans-influence of the carbene ligand. By measuring the CO stretching frequencies in a range of [Rh(acac)(CO)(L)] complexes (L = CO, L₁, L₂, PPh₃, PⁿBu₃, P(O-2,4-^tBu₂-Ph)₃) the following electron donating ability series was established: L₁ ∼ L₂ ∼ PⁿBu₃ > PPh₃ > P(O-2,4-^tBu₂-Ph)₃ > CO; indicating the carbenes investigated in this study to have a similar electronic cis-influence as trialkyl phosphines. Both complexes do not display hydroformylation activity towards 1-hexene in the absence of added phosphine or phosphite ligands under the conditions investigated (P = 60; T = 85 °C). In the presence of a phosphine or phosphite ligand the resulting hydroformylation catalysis was identical to that observed for [Rh(acac)(CO)₂] and the corresponding ligand and subsequent high-pressure ³¹P NMR studies confirmed substitution of the carbene ligand under these conditions.     

Titanium ketimide complexes as α-olefin homo- and copolymerisation catalysts. X-ray diffraction structures of [TiCp(NCBu2)Cl2] (Cp=Ind, Cp*)

The synthesis of [TiInd(NC^tBu₂)Cl₂] and the applications of [TiCp^′(NC^tBu₂)Cl₂] (Cp^′=Ind, Cp*, Cp) as ethylene and propylene homopolymerisation catalysts, as well as its behaviour as catalysts of ethylene and 10-undecen-1-ol copolymerisation are described. The optimisation of the catalytic reactions showed that all compounds are very active homopolymerisation catalysts, particularly [TiInd(NC^tBu₂)Cl₂] that gives 123.37 × 10⁶ g/(molTi [E] h) and 50.77 × 10⁶ g/(molTi [P] h) of linear polyethylene and atatic polypropylene, respectively. The less active homopolymerisation catalyst, [TiCp(NC^tBu₂)Cl₂], is the most effective ethylene/10-undecen-1-ol copolymerisation catalyst, leading to the highest degree of polar monomer incorporation. The polymers obtained were characterised by NMR and DSC. The molecular structures of [TiCp^′(NC^tBu₂)Cl₂] (Cp^′=Ind, Cp*) were determined by X-ray diffraction studies.     

Organoplatinum(II) complexes with phosphite ligands

The phosphite complexes cis-[PtMe₂L(SMe₂)] in which L = P(OⁱPr)₃, 1a, or L = P(OPh)₃, 1b, were synthesized by the reaction of cis,cis-[Me₂Pt(μ-SMe₂)₂PtMe₂] with 2 equiv. of L. If 4 equiv. of L was used the bis-phosphite complexes cis-[PtMe₂L₂] in which L = P(OⁱPr)₃, 2a, or L = P(OPh)₃, 2b, were obtained. The reaction of cis-[Pt(p-MeC₆H₄)₂(SMe₂)₂] with 2 equiv. of L gave the aryl bis-phosphite complexes cis-[Pt(p-MeC₆H₄)₂L₂] in which L = P(OⁱPr)₃, 2a′, or L = P(OPh)₃, 2b′. Use of 1 equiv. of L in the latter reaction gave the bis-phosphite complex along with the starting complex in a 1:1 ratio.The complexes failed to react with MeI. The reaction of cis,cis-[Me₂Pt(μ-SMe₂)₂PtMe₂] with 2 equiv. of the phosphine PPh₃ gave cis-[PtMe₂(PPh₃)₂] and cis-[PtMe₂(PPh₃)(SMe₂)] along with unreacted starting material. Reaction of cis-[PtMe₂L(SMe₂)], 1a and 1b with the bidentate phosphine ligand bis(diphenylphosphino)methane, dppm = Ph₂PCH₂PPh₂, gave [PtMe₂(dppm)], 8, along with cis-[PtMe₂L₂], 2. The reaction of cis-[PtMe₂L(SMe₂)] with 1/2 equiv. of the bidentate N-donor ligand NN = 4,4′-bipyridine yielded the binuclear complexes [PtMe₂L(μ-NN)PtMe₂L] in which L = P(OⁱPr)₃, 3a, or L = P(OPh)₃, 3b.The complexes were fully characterized using multinuclear NMR (¹H, ¹³C, ³¹P, and ¹⁹⁵Pt) spectroscopy.     

Diazaallyls of group 4 metals based on trans-1,2-diaminocyclohexane

Amination of 1-bromo-2-methylpyridine with trans-1,2-diaminocyclohexane gives the corresponding bis(aminopyridine) H₂L¹. Conversion of the same diamine to the N,N′-bis(amino-4,4-dimethylthiazoline) H₂L² is also completed in three steps. The analogous aminooxazoline is however inaccessible, although the aminocyclohexane analogue is prepared readily. The proligand H₂L¹ forms bis(aminopyridinato) alkyl complexes of the type [ZrL¹R₂] (R = CH₂Ph, CH₂Bu^t). The molecular structure of the neopentyl complex shows that the chiral backbone leads to a puckering of the N₄Zr coordination sphere, which contrasts with the related cyclohexyl-bridged Schiff-base complexes which are essentially planar. [ZrL²(CH₂Bu^t)₂] - the first aminothiazolinato complex - is formed similarly. A comparison of the structures of [ZrL¹(CH₂Bu^t)₂] and [ZrL²(CH₂Bu^t)₂] indicates that the latter has a fully delocalised N-C-N system, rather similar to a bis(amidinate). Reaction of H₂L² with [Ti(NMe₂)₄] gives [TiL²(NMe₂)₂] which appears to be C₂-symmetric like the above complexes according to NMR spectra, but has one uncoordinated thiazoline unit in the solid state. This is a result of increased ring strain at the smaller titanium metal centre.     

New lead(II) complexes with N,S-ligands,including a lead pyrazolonate with unusual packing flexibility

The reaction of lead(II) acetate in methanol with thiosemicarbazones derived from β-keto esters and β-keto amides (HTSCs) afforded two lead(II) thiosemicarbazonates and numerous homoleptic ([PbL₂]) and/or heteroleptic ([Pb(OAc)L]) complexes containing deprotonated pyrazolones L⁻ formed by metal-induced cyclization of the starting HTSC ligands. All the complexes isolated were characterized by IR spectroscopy in the solid state and by ¹H and ¹³C NMR spectroscopy in DMSO solution; in addition, crystals containing [Pb(L⁶)₂] and [Pb(L⁷)₂] were examined by X-ray crystallography. [Pb(L⁶)₂] · 0.5H₂O · 0.3MeOH (HL⁶ = 4-ethyl-2,5-dihydro-3-methyl-5-oxo-1H-pyrazole-1-carbothiamide) showed three types of molecule with significant structural differences that appear to be determined by packing interactions. In all three molecules the Pb?Pb distances are very short [3.6096(8)–3.7562(8) Å], but density-functional-theoretic calculations at the B3LYP level do not support the existence of Pb–Pb bonds. In [Pb(L⁷)₂] (HL⁷ = N-ethyl-2,5-dihydro-3-methyl-5-oxo-1H-pyrazole-1-carbothiamide) all the molecules are of a single type, and they are linked in a three-dimensional network by weak intermolecular Pb?O bonds.     

Syntheses and crystal structures of [Bu3SbCr(CO)5], [Bu3BiM(CO)5] (M = Cr, W), and [Bu3BiMnCp′(CO)2] (Cp′ = η-C5H4CH3)

Syntheses and crystal structures of [^tBu₃SbCr(CO)₅] (1), [^tBu₃BiM(CO)₅] [M = Cr (2), W (3)] and [^tBu₃BiMnCp′(CO)₂] (4) (Cp′ = η⁵-C₅H₄CH₃) are reported.     

Reactions of tBu2P–PLi–PtBu2 with [(Et3P)2MCl2] (M = Ni,Pd, Pt). Synthesis and Properties of [(1,2‐η‐tBu2P=P–PtBu2)M(PEt3)Cl] (M=Ni,Pd)

^tBu₂P–PLi–P^tBu₂·2THF reacts with [cis‐(Et₃P)₂MCl₂] (M = Ni, Pd) yielding [(1,2‐η‐^tBu₂P=P–P^tBu₂)Ni(PEt₃)Cl] and [(1,2‐η‐^tBu₂P=P–P^tBu2)Pd(PEt₃)Cl], respectively. ^tBu₂P– PLi–P^tBu₂ undergoes an oxidation process and the ^tBu₂P–P–P^tBu₂ ligand adopts in the products the structure of a side‐on bonded 1,1‐di‐tert‐butyl‐2‐(di‐tert‐butylphosphino)diphosphenium cation with a short P–P bond. Surprisingly, the reaction of ^tBu₂P–PLi–P^tBu₂·2THF with [cis‐(Et₃P)₂PtCl₂] does not yield [(1,2‐η‐^tBu₂P=P–P^tBu₂)Pt(PEt₃)Cl].     

Cu(II) and Pd(II) complexes of N-(2-hydroxybenzyl)aminopyridines

N-(2-Hydroxybenzyl)aminopyridines (Lⁱ) react with Cu(II) and Pd(II) ions to form complexes in the compositions Cu(Lⁱ)₂(CH₃COO)₂ · nH₂O (n = 0, 2, 4), Pd(Lⁱ)₂Cl₂ · nC₂H₅OH (n = 0, 2) and Pd(L²)₂Cl₂ · 2H₂O. In the complexes, the ligands are neutral and monodentate which coordinate through pyridinic nitrogen. Crystal data of the complexes obtained from 2-amino pyridine derivative have pointed such a coordinating route and comparison of the spectral data suggests the validity of similar complexation modes of other analog ligands. Cu(II) complex of N-(2-hydroxybenzyl)-2-aminopyridine (L¹), [Cu(L¹)₂(CH₃COO)₂] has slightly distorted square planar cis-mononuclear structure which is built by two oxygen atoms of two monodentate carboxylic groups disposed in cis-position and two nitrogen atoms of two pyridine rings. The remaining two oxygen atoms of two carboxylic groups form two Cu and H bridges containing cycles which joint at same four coordinated copper(II) ion. IR and electronic spectral data and the magnetic moments as well as the thermogravimetric analyses also specify on mononuclear octahedric structure of complexes [Cu(L²)₂(CH₃COO)₂ · 2H₂O] and [Cu(L³)₂(CH₃COO)₂ · 4H₂O] where L² and L³ are N-(2-hydroxybenzyl)-2- or 3-aminopyridines, respectively.     

Aminobis(phenolate)s of imidomolybdenum(VI) and -tungsten(VI)

The reactions of trans-[MoO(ONO^Me)Cl₂] 1 (ONO^Me = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) dianion) and trans-[MoO(ONO^tBu)Cl₂] 2 (ONO^tBu = methylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenolate) dianion) with PhNCO afforded new imido molybdenum complexes trans-[Mo(NPh)(ONO^Me)Cl₂] 3 and trans-[Mo(NPh)(ONO^tBu)Cl₂] 4, respectively. As analogous oxotungsten starting materials did not show similar reactivity, corresponding imido tungsten complexes were prepared by the reaction between [W(NPh)Cl₄] with aminobis(phenol)s. These reactions yielded cis- and trans-isomers of dichloro complexes [W(NPh)(ONO^Me)Cl₂] 5 and [W(NPh)(ONO^tBu)Cl₂] 6, respectively. The molecular structures of 4, cis-6 and trans-6 were verified by X-ray crystallography. Organosubstituted imido tungsten(VI) complex cis-[W(NPh)(ONO^tBu)Me₂] 7 was prepared by the transmetallation reaction of 6 (either cis or trans isomer) with methyl magnesium iodide.     

Titanium and zirconium ketimide complexes: synthesis and ethylene polymerisation catalysis

The syntheses of ketimide titanium complexes of the type Ti(NC^tBu₂)₃X (X = Cl, Cp, Ind), Ti(NC^tBu₂)₄ and the zirconium complex CpZr(NC^tBu₂)₂Cl are described. When activated by MAO, all compounds are ethylene polymerisation catalysts. In the conditions studied, the most active catalyst is CpZr(NC^tBu₂)₂Cl, with an activity of 2.7 × 10⁵ kg/(molZr [E] h). Titanium complexes are less active by about two orders of magnitude. The polyethylene produced is linear, as determined by NMR spectroscopy. Molecular structures of Ti(NC^tBu₂)₃X (X = Cl, Cp, Ind) and Ti(NC^tBu₂)₄ were determined by X-ray single crystal diffraction.     

Synthesis, crystal structure and biological activities of four novel tetranuclear di-organotin(IV) carboxylates

Four complexes: [Bu₂(L₁)SnOSn(L₁)Bu₂]₂ (1), [Bu₂(L₂)SnOSn(L₂)Bu₂]₂ (2), [Bu₂(L₃)SnOSn(L₃)Bu₂]₂ (3), and [Bu₂(L₄)SnOSn(L₄)Bu₂]₂ (4), (HL₁ = 2-(4-methylbenzoyl)benzoic acid, HL₂ = 2-(2,4-diethylbenzoyl)benzoic acid, HL₃ = 2-(4-chlorobenzoyl)benzoic acid, HL₄ = 2-(4-isopropylbenzoyl)benzoic acid) have been prepared and structurally characterized by means of elemental analysis and vibrational, ¹H NMR and FT-IR spectroscopies. The crystal structures of all complexes have been determined by X-ray crystallography. Three distannoxane rings are present to the dimeric tetraorganodistannoxane of planar ladder arrangement. Each structure is centro-symmetric and features a central rhombus Sn₂O₂ unit with two additional tin atoms linked at the O atoms. Complex 1 exhibited good antibacterial and antitumor activities and have a potential to be used as drugs.     

Synthesis and ROMP activity of aminophenol-substituted tungsten(VI) and molybdenum(VI) complexes

Tungsten(VI) and molybdenum(VI) complexes [MO(L¹)Cl₂] and [M(X)(L²)Cl₃] (X = O, NPh) with tridentate aminobis(phenolate) ligand L¹ = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) and bidentate aminophenolate ligand L² = 2,4-di-tert-butyl-6-((dimethylamino)methyl)phenolate) were prepared and characterised. These complexes are principally stable in open atmosphere under ambient conditions. When activated with Et₂AlCl, they exhibited high activity in ring-opening metathesis polymerisation (ROMP) of 2-norbornene (NBE) and its derivatives. Especially complexes [M(NPh)(L²)Cl₃], which are easily available from corresponding metal oxides MO₃ by a simple three-step synthesis, were found very efficient ROMP catalysts for NBE (M = Mo, W) and 2-norbornen-5-yl acetate (M = Mo).     

A new ruthenium nitrosyl species based on a pendant-arm 1,4,8,11-tetraazacyclotetradecane (cyclam) derivative: An experimental and theoretical study

The complex cis-[Ru(L^py)NO]³⁺ (I) (L^py = N-(2-methylpyridyl)1,4,8,11-tetraazacyclotetradecane) was prepared by the stoichiometric reaction between Ru(dmso)₄Cl₂ and L^py and an excess of NaNO₂ in ethanolic medium, followed by acidification of the solution. The diamagnetic species was isolated as its hexafluorophosphate salt, and fully characterized by IR (ν_NO = 1917 cm⁻¹) and diverse NMR techniques in combination with theoretical computations based on the density functional theory (DFT). The compound displays strong electronic transitions below 300 nm and weak ones in the visible region of the spectrum, all of them solvent insensitive. The reaction of cis-[Ru(L^py)NO]³⁺ with OH⁻ generates the strongly colored nitro compound cis-[Ru(L^py)NO₂]⁺ (II) The {RuNO}⁶ compound can be interconverted into the one-electron reduced {RuNO}⁷ species cis-[Ru(L^py)NO]²⁺ (III). The reduction process is completely reversible in the cyclic voltammetry timescale with E⁰ (versus Ag/AgCl, 3 M Cl⁻) = −0.02 V and 0.18 V in water and acetonitrile, respectively. Controlled potential reduction in both solvents yields to the quantitative formation of III, a process which involves significant changes in the electronic spectroscopy. The {RuNO}⁷ species proved to be inert against ligand loss, and electrogenerated solutions remained unchanged for several hours if protected from atmospheric oxygen. Electrochemical reoxidation or exposure to air lead to the complete recovery of the starting cis-[Ru(L^py)NO]³⁺ material, without signs of secondary reactions. The robustness of the coordination sphere appears as a consequence of the multidentate nature of L^py.     

Cationic (fluoromesityl)palladium(II) complexes

Halide abstraction from [Pd(μ-Cl)(Fmes)(NCMe)]₂ (Fmes = 2,4,6-tris(trifluoromethyl)phenyl or nonafluoromesityl) with TlBF₄ in CH₂Cl₂/MeCN gives [Pd(Fmes)(NCMe)₃]BF₄, which reacts with monodentate ligands to give the monosubstituted products trans-[Pd(Fmes)L(NCMe)₂]BF₄ (L = PPh₃, P(o-Tol)₃, 3,5-lut, 2,4-lut, 2,6-lut; lut = dimethylpyridine), the disubstituted products trans-[Pd(Fmes)(NCMe)(PPh₃)₂]BF₄, cis-[Pd(Fmes)(3,5-lut)₂(NCMe)]BF₄, or the trisubstituted products [Pd(Fmes)L₃]BF₄ (L = CN^tBu, PHPh₂, 3,5-lut, 2,4-lut). Similar reactions using bidentate chelating ligands give [Pd(Fmes)(L-L)(NCMe)]BF₄ (L-L = bipy, tmeda, dppe, OPPhPy₂-N,N′, (OH)(CH₃)CPy₂-N,N′). The complexes trans-[Pd(Fmes)L₂(NCMe)]BF₄ (L = PPh₃, tht) (tht = tetrahydrothiophene) and [Pd(Fmes)(L-L)(NCMe)]BF₄ (L-L = bipy, tmeda) were obtained by halide extraction with TlBF₄ in CH₂Cl₂/MeCN from the corresponding neutral halogeno complexes trans-[Pd(Fmes)ClL₂] or [Pd(Fmes)Cl(L-L)]. The aqua complex trans-[Pd(Fmes)(OH₂)(tht)₂]BF₄ was isolated from the corresponding acetonitrile complex. Overall, the experimental results on these substitution reactions involving bulky ligands suggest that thermodynamic and kinetic steric effects can prevail affording products or intermediates different from those expected on purely electronic considerations. Thus,water, whether added on purpose or adventitious in the solvent, frequently replaces in part other better donor ligands, suggesting that the smaller congestion with water compensates for the smaller M-OH₂ bond energy.     

General route for the synthesis of terminal phosphanylphosphido complexes of Zr(IV) and Hf(IV): Structural investigations of the first zirconium complex with a phosphanylphosphido ligand

Reactions of R₂P-P(SiMe₃)Li with [Cp₂MCl₂] (M = Zr, Hf) in hydrocarbons yield the related terminal phosphanylphosphido complexes [Cp₂M(Cl){(Me₃Si)P-PR₂-κP¹}] (R = ⁱPr and ^tBu). The solid state structures of [Cp₂M(Cl){P(SiMe₃)-PⁱPr₂-κP¹}] (M = Zr, Hf) were established by single crystal X-ray diffraction studies. The phosphido-P atoms adopt almost planar geometries and the phosphanyl P atoms adopt pyramidal geometries. The reaction of a mixture of (Me₃Si)₂PLi and Ph₂P-P(SiMe₃)Li with [CpZrCl₃] in toluene yields the dinuclear complex [Cp₂Zr₂Cl₅(Ph₂PPPSiMe₃)(Li THF DME)].     

Syntheses and crystal structures of mono- and bi-metallic zinc compounds of symmetrically- and asymmetrically-substituted bis(amino)cyclodiphosph(V)azanes

The dioxocyclodiphosph(V)azane cis-[(^tBuHN)OP(μ-N^tBu)₂PO(NH^tBu)] reacted with two equivalents of diethylzinc to form the centrosymmetric dimer {[(OPN^tBu)₂(N^tBu)₂ZnEt](ZnEt · THF)}₂ (1) while under identical conditions, the sulfur and selenium analogues afforded only the monoethylzinc compounds {[(^tBuHN)EP(μ-N^tBu)₂PE(N^tBu)](ZnEt · THF)}ES(2), Se (3). To further probe the apparent ligand effects on coordination number and coordination site, cis-[(PhHN)SP(μ-N^tBu)₂PS(NH^tBu)] (5) was synthesized from cis-[ClP(μ-N^tBu)₂P(NH^tBu)] (4) and both were characterized by single-crystal X-ray diffraction. Two equivalents of 5 reacted with diethylzinc to produce the homoleptic, trispirocyclic complex {[(^tBuHN)SP(μ-N^tBu)₂PS(NPh)]₂Zn} (6). A second asymmetrically-substituted cyclodiphosph(V)azane, namely [(^tBuNH)SP(μ-N^tBu)₂PNp-tol(NH^tBu)] (7), was also synthesized and structurally characterized. In contrast to 5, only one equivalent of this ligand reacted with excess diethylzinc, via its N,N^′, rather than its N,S side, to afford {[(^tBuHN)SP(μ-N^tBu)₂PNp-tolyl(N^tBu)](ZnEt)} (8).     

A novel blue luminescent high-spin iron(III) complex with interlayer O–H⋯Cl bridging: Synthesis,structure and spectroscopic studies

A blue luminescent high-spin (s = 5/2) iron(III) complex, [Fe^III(HL¹)₂]Cl (2), was synthesized with the acyclic tridentate salicylaldehyde 2-pyridyl hydrazone ligand, H₂L¹ (1), and it can subsequently be deprotonated and methylated into blue luminescent iron(III) complexes, [Fe^III(L²)₂]Cl (3) and [Fe^III(MeL¹)₂]Cl (4) respectively. On excitation at 390 nm, the ligand and the complexes display fluorescence in the blue region (λ_em = 440–450 nm) of the spectrum. The association constant, (K_ass = 4.6421 × 10⁴ at 298 K) and the thermodynamic parameters for complex 2 have been determined by UV–Vis spectroscopy. The iron(III)–iron(II) reduction potentials lie near – 0.2 V versus SCE. The X-ray crystal structure of the complex, [Fe^III(HL¹)₂]Cl · H₂O (2), was determined, revealing meridional binding of the two ligands affording a cis-FeN₄O₂ geometry with alternate chlorine and water molecules at the interface of the main molecule, resulting in interesting interlayer O–H?Cl bridging.