Cytotoxic half-sandwich rhodium(III) complexes: Polypyridyl ligand influence on their DNA binding properties and cellular uptake

The DNA binding of polypyridyl (pp) (η⁵-C₅Me₅)Rh^III complexes of the types [(η⁵-C₅Me₅)RhCl(pp)](CF₃SO₃) (2-6) (pp = bpy, phen, dpq, dppz, dppn), [(η⁵-C₅Me₅)Rh{(Me₂N)₂CS}(pp)](CF₃SO₃)₂ (7-9) (pp = dpq, dppz, dppn) and [(η⁵-C₅Me₅)Rh(L)(pp)](CF₃SO₃) (10) (L = C₆H₅S⁻) and (11) (L = C₁₀H₇S⁻) has been studied by UV/Vis spectroscopy, circular dichroismus and viscosity measurements. Complexes 3-11 are cytotoxic towards the human MCF-7 breast and HT-29 colon cancer cell lines and exhibit IC₅₀ values in the range 0.56-10.7 μM. Stable intercalative binding into CT-DNA is indicated for the dpq and dppz complexes by large increases ΔT_m of 6-12 °C in the DNA thermal denaturation temperature for r = [complex]/[DNA] = 0.1 and by induced CD bands and large viscosity increases. In contrast, significant DNA lengthening is not observed after incubation of the biopolymer with the dppn complexes 2 and 9 at molar ratios of r < 0.08. Pronounced hypochromic shifts for the π-π^∗ transitions of the dppn ligands in the range 320-425 nm indicate the possible presence of surface stacking. The in vitro cytotoxicities of the chloro complexes 4-6 and the (Me₂N)₂CS complexes 7-9 are dependent on the size of the polypyridyl ligand with IC₅₀ values decreasing in the order dpq > dppz > dppn. For instance, IC₅₀ values of 5.3, 1.5 and 0.91 μM were determined for 7-9 against MCF-7 cells. Rapid Cl⁻/H₂O exchange leads the formation of aqua dications for 4-6, whose levels of cellular uptake and cytotoxicities are similar to those established for 7-9. Intramolecular interactions between the aromatic thiolate and dppz ligands of 10 and 11 prevent significant DNA intercalation. X-ray structural determinations have been performed for 2-7 and 11.     

Palladium(II)/allylpalladium(II) complexes with xanthate ligands: Single-source precursors for the generation of palladium sulfide nanocrystals

In an effort to find simple and common single-source precursors for palladium sulfide nanostructures, palladium(II) complexes, [Pd(S₂X)₂] (X = COMe (1), COⁱPr (2)) and η³-allylpalladium complexes with xanthate ligands, [(η³-CH₂C(CH₃)CR₂)Pd(S₂X)] (R = H, X = COMe (3); R = H, X = COEt (4); R = H, X = COⁱPr (5); R = CH₃, X = COMe (6)), have been investigated. The crystal structures of [Pd(S₂X)₂] (X = COMe (1), CoⁱPr (2)) and [(η³-CH₂C(CH₃)CH₂)Pd(S₂COMe)] (3) have been established by single crystal X-ray diffraction analysis. The complexes, 1, 2 and 3 all contain a square planar palladium(II) centre. In the allyl complex 3, this is defined by the two sulfurs of the xanthate and the outer carbons of the 2-methylallyl ligand, while in the complexes, 1 and 2 it is defined by the four sulfur atoms of the xanthate ligand. Thermogravimetric studies have been carried out to evaluate the thermal stability of η³-allylpalladium(II) analogues. The complexes are useful precursors for the growth of nanocrystals of PdS either by furnace decomposition or solvothermolysis in dioctyl ether. The solvothermal decomposition of complexes in dioctyl ether gives a new metastable phase of PdS which can be transformed to the more stable tetragonal phase at 320 °C. The nanocrystals obtained have been characterized by PXRD, SEM, TEM and EDX.     

Cationic half-sandwich complexes (Rh, Ir, Ru) containing 2-substituted-1,8-naphthyridine chelating ligands: Syntheses, X-ray structure analyses and spectroscopic studies

Reactions of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, p-ⁱPrC₆H₄Me) and [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂ (M = Rh, Ir) with 2-substituted-1,8-naphthyridine ligands, 2-(2-pyridyl)-1,8-naphthyridine (pyNp), 2-(2-thiazolyl)-1,8-naphthyridine (tzNp) and 2-(2-furyl)-1,8-naphthyridine (fuNp), lead to the formation of the mononuclear cationic complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ {L = pyNp (1); tzNp (2); fuNp (3)}, [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ {L = pyNp (4); tzNp (5); fuNp (6)}, [(η⁵-C₅Me₅)Rh(L)Cl]⁺ {L = pyNp (7); tzNp (8); fuNp (9)} and [(η⁵-C₅Me₅)Ir(L)Cl]⁺ {L = pyNp (10); tzNp (11); fuNp (12)}. All these complexes are isolated as chloro or hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV/Vis spectroscopy. The molecular structures of [1]Cl, [2]PF₆, [4]PF₆, [5]PF₆ and [10]PF₆ have been established by single crystal X-ray structure analysis.     

Planar chiral alkenylferrocene phosphanes: Preparation, structural characterisation and catalytic use in asymmetric allylic alkylation

Planar chiral alkenylferrocene phosphanes, viz. (S_p)-[Fe(η⁵-C₅H₃-1-PPh₂-2-CHCR₂)(η⁵-C₅H₅)] (R = H, (S_p)-2; Ph, (S_p)-5) and (S_p)-[Fe(η⁵-C₅H₃-1-PPh₂-2-(E)-CHCHR)(η⁵-C₅H₅)] (R = Ph, (S_p)-3; C(O)CH₃, (S_p)-6; and CO₂CH₂CH₃, (S_p)-7) have been prepared by alkenylation of (S_p)-2-(diphenylphosphanyl)ferrocenecarboxaldehyde and tested as ligands for enantioselective palladium-catalysed allylic alkylation of 1,3-diphenyprop-2-en-1-yl acetate with dimethyl malonate. All phosphanylalkenes formed active catalysts. However, the induced enantioselectivity was only poor to moderate [12-43% ee after 20 h at room temperature], with the ee’s and configuration of the preferred product strongly depending on the ligand structure. The catalytic results have been related to solution properties (NMR, ESI MS) and the solid-state structural data (X-ray diffraction) of [Pd(η³-1,3-Ph₂C₃H₃){(S_p)-2-η²:κP}]ClO₄ ((S_p)-12), which represent a model of the plausible reaction intermediate.     

Pd(0) and Pd(II) derivatives with heteroannularly bridged chiral ferrocenyl diphosphine ligands - A stereochemical analysis

The ligands (S_c, S_p)-1-diphenylphosphino-2,1′-(1-dicyclohexylphosphinopropanediyl)ferrocene, (S_c, S_p)-PP^CyPF, and (S_c, S_p)-1-diphenylphosphino-2,1′-(1-diphenylphosphinopropanediyl)ferrocene, (S_c, S_p)-PP^PhPF, have been used in the synthesis of the new Pd(0) and Pd(II) derivatives [Pd(PP^CyPF)(DMFU)] (1) (DMFU = dimethylfumarate), [Pd(PP^CyPF)(MA)] (2) (MA = maleic anhydride), [Pd(η³-2-Me-C₃H₄)(PP)]OTf (PP = PP^CyPF, 3; PP^PhPF, 4) (OTf = triflate), [PdRR′(PP)] (R = Me, R′ = Cl, PP = PP^CyPF, 5, PP^PhPF, 6; R = R′ = Me, PP = PP^CyPF, 7, PP^PhPF, 8; R = R′ = C₆F₅, PP = PP^CyPF, 9, PP^PhPF, 10). The molecular structure of 7 has been determined by X-ray diffraction. In the cases of complexes 1-4 two isomers are formed depending on the orientation of the ancillary ligand with respect to the ferrocenyl core. The stereochemistry of these complexes has been determined. In complex 6 the two possible isomers are obtained whereas in complex 5 the derivative with the Me group trans to PPh₂ is selectively formed. Restricted rotation of the pentafluorophenyl groups with respect to the Pd-C bond has been found in 9 and 10. In all derivatives the conformation of the ferrocenyl ligand is the same as that seen by X-ray diffraction and deduced from NMR data.     

Synthesis and characterization of palladium(II) complexes with chiral aminophosphine ligands: Catalytic behaviour in asymmetric hydrovinylation. Crystal structure of cis-[PdCl2(PPh((R)-NHCHCH3Ph)2)2]

Optically active ligands of type Ph₂PNHR (R = (R)-CHCH₃Ph, (a); (R)-CHCH₃Cy, (b); (R)-CHCH₃Naph, (c)) and PhP(NHR)₂ (R = (R)-CHCH₃Ph, (d); (R)-CHCH₃Cy, (e)) with a stereogenic carbon atom in the R substituent were synthesized. Reaction with [PdCl₂(COD)₂] produced [PdCl₂P₂] (1) (P = PhP(NHCHCH₃Ph)₂), whose molecular structure determined by X-ray diffraction showed cis disposition for the ligands. All nitrogen atoms of amino groups adopted S configuration. The new ligands reacted with allylic dimeric palladium compound [Pd(η³-2-methylallyl)Cl]₂ to gave neutral aminophosphine complexes [Pd(η³-2-methylallyl)ClP] (2a-2e) or cationic aminophosphine complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3a-3e) in the presence of the stoichiometric amount of AgBF₄. Cationic complexes [Pd(η⁴3-2-methylallyl)(NCCH₃)P]BF₄ (4a-4e) were prepared in solution to be used as precursors in the catalytic hydrovinylation of styrene. ³¹P NMR spectroscopy showed the existence of an equilibrium between the expected cationic mixed complexes 4, the symmetrical cationic complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3) and [Pd(η³-2-methylallyl)(NCCH₃)₂]BF₄ (5) coming from the symmetrization reaction. The extension of the process was studied with the aminophosphines (a-e) as well as with nonchiral monodentate phosphines (PCy₃ (f), PBn₃ (g), PPh₃ (h), PMe₂Ph (i)) showing a good match between the extension of the symmetrization and the size of the phosphine ligand. We studied the influence of such equilibria in the hydrovinylation of styrene because the behaviour of catalytic precursors can be modified substantially when prepared ‘in situ’. While compounds 3 and bisacetonitrile complex 5 were not active as catalysts, the [Pd(η³-2-methylallyl)(η²-styrene)₂]⁺ species formed in the absence of acetonitrile showed some activity in the formation of codimers and dimers. Hydrovinylation reaction between styrene and ethylene was tested using catalytic precursors solutions of [Pd(η³-2-methylallyl)LP]BF₄ ionic species (L = CH₃CN or styrene) showing moderate activity and good selectivity. Better activities but lower selectivities were found when L = styrene. Only in the case of the precursor containing Ph₂PNHCHCH₃Ph (a) ligand was some enantiodiscrimination (10%) found.     

The influence of alkane spacer of bis(diphenylphosphino)alkanes on the nuclearity of silver(I): Syntheses and structures of P,P′-bridged clusters and coordination polymers involving dithiophosphates

The effect of the length of alkane spacer in diphosphines on the nuclearity of Ag(I) complexes containing dialkyl dithiophosphates (dtp) ligands has been investigated. 1,1-Bis(diphenylphosphino)methane (dppm) yielded tetranuclear [Ag₄(dppm)₂{S₂P(OEt)₂}₄] (1), [Ag₄(dppm)₂{S₂P(OⁱPr)₂}₄] (3), trinuclear [Ag₃(dppm)₃{S₂P(OEt)₂}₂](PF₆) (2), and a dinuclear [Ag₂(dppm)₂{S₂P(OⁱPr)}](PF₆) (4). The increase in spacer length from one methylene in dppm to two in 1,2-bis(diphenylphosphino)ethane (dppe) resulted in the formation of polymeric, [Ag(dppe){S₂P(OR)₂}]_∞ (R = Et, 5a and 5a′; ⁱPr, 5b), and [Ag₄(μ₃-Cl)(dppe)_1.5{S₂P(OR)₂}₃]_∞ (R = Et, 6a; ⁱPr, 6b). Compounds 5a, 5b, 6a and 6b were reported earlier [C.W. Liu, B.-J. Liaw, L.-S. Liou, J.-C. Wang, Chem. Commun. (2005) 1983]. Further increase in the chain length to four methylene units in 1,4-bis(diphenylphosphino)butane (dppb) yielded dppb-bridged polymers, [Ag(dppb){S₂P(OEt)₂}]_∞ (7) and [Ag₂(dppb){S₂P(OEt)₂}₂]_∞ (8). In all the polynuclear compounds, diphosphines acted as P,P′-bridging ligands, while the dtp ligands (S,S′-donors) adopted varieties of coordination patterns: S,S′-chelating (5, 7), S,S′-bridging (4), bimetallic-triconnective, μ₂:η²,η¹ (1, 3, 8), bimetallic-diconnective, μ₂:η² (2, 3) and trimetallic-triconnective, μ₃:η²,η¹ (6). Some of the complexes exhibit argentophilicity with Ag?Ag distances in the range, 2.918-3.360 Å. Concomitant bridging of two silver atoms either by dppm and dtp ligands (1, 3 and 4) or two dtp ligands (8) lead to close silver-silver contacts. The diphosphines (dppe and dppb) with longer spacer appeared to favor 1D or 2D polymers due to the flexibility of the spacer within the diphosphine unit by adopting anti conformation as opposed to syn conformation of the dppm linker is revealed in complexes.     

Trimethylstannyl (diphenylphosphino)acetate: a source of (diphenylphosphino)acetate ligand in the synthesis of coordination compounds

Trimethylstannyl (diphenylphosphino)acetate (1), which is readily accessible from potassium (diphenylphosphino)acetate and trimethylstannyl chloride, may serve as the source of (diphenylphosphino)acetate anion in the preparation of coordination compounds. Thus, the reactions between [M(cod)Cl₂] (M = Pd and Pt; cod = η²:η²-cycloocta-1,5-diene) and two equivalents of 1 give [M(Ph₂PCH₂CO₂-κ²O,P)₂] (2 and 3), while the reaction of [{Pd(μ-Cl)Cl(PFur₃)}₂] (4; Fur = 2-furyl) with one equivalent of 1 yields [SP-4-3]-[PdCl(Ph₂PCH₂CO₂-κ²O,P)(PFur₃)] (5). The reactions of 1 with the dimers [{Rh(η⁵-C₅Me₅)Cl(μ-Cl)}₂] and [{Ru(η⁶-1,4-MeC₆H₄(CHMe₂))Cl(μ-Cl)}₂] (at 1-to-metal ratio 1:1) produce O,P-chelated complexes as well, albeit as stable adducts with the liberated Me₃SnCl: [RhCl(η⁵-C₅Me₅)(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (6) and[RuCl(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (8). The related complexes with P-monodentate (diphenylphosphino)acetic acid, [RhCl₂(η⁵-C₅Me₅)(Ph₂PCH₂CO₂H-κ,P)] (7) and [RuCl₂(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂H-κP)] (9), were obtained by bridge splitting in the dimers with the phosphinocarboxylic ligand. All new compounds were characterized by spectral methods and combustion analyses, and the structures of 2 · 3CH₂Cl₂, 3, 4, 5, 6 and 8 were determined by X-ray crystallography.     

Synthesis, characterization, and norbornene polymerization of η-benzylnickel(II) complexes of N-heterocyclic carbenes

Neutral η¹-benzylnickel carbene complexes, [Ni(η¹-CH₂C₆H₅)(IiPr)(PMe₃)(Cl)] (3) (IiPr = 1,3-bis-(2,6-diisopropylphenyl)imidazol-2-ylidene) and [Ni(η¹-CH₂C₆H₅)(SIiPr)(PMe₃)(Cl)] (4) (SIiPr = 1,3-bis-(2,6-diisopropylphenyl)imidazolin-2-ylidene), were prepared by the reaction between [Ni(η³-CH₂C₆H₅)(PMe₃)(Cl)] and an equivalent amount of the corresponding free N-heterocyclic carbene. The preparation of η³-benzylnickel carbene complexes, [Ni(η³-CH₂C₆H₅)(IiPr)(Cl)] (5) and [Ni(η³-CH₂C₆H₅)(SIiPr)(Cl)] (6) were carried out by the abstraction of PMe₃ from 3 and 4 by the treatment of B(C₆F₅)₃. The treatment of AgX on 5 and 6 produced the anion-exchanged complexes, [Ni(η³-CH₂C₆H₅)(NHC)(X)] (7, NHC = IiPr, X = O₂CCF₃; 8, NHC = IiPr, X = O₃SCF₃; 9, NHC = SIiPr, X = O₂CCF₃; 10, NHC = SIiPr, X = O₃SCF₃). The solid state structures of 3 and 10 were determined by X-ray crystallography. The η³-benzyl complexes of IiPr (5, 7, and 8) alone, in the absence of any activators such as borate and MAO, showed good catalytic activity towards the vinyl-type norbornene polymerization. The catalyst was thermally robust and the activity increases as the temperature rises to 130 °C.     

Mononuclear ruthenium(II) complexes bearing the (S,S)-Pr-pybox ligand

The complexes trans-[RuCl₂(L){(S,S)-ⁱPr-pybox}] ((S,S)-ⁱPr-pybox = 2,6-bis[4′-(S)-isopropyloxazolin-2′-yl]pyridine, L = PMe₃ (1), P(OMe)₃ (2), PPh₂(CH₂CHCH₂) (3), CNBn (5), CNCy (6) and MeCN (7)) have been synthesized by substitution of ethylene on the precursor trans-[RuCl₂(η²-C₂H₄){(S,S)-ⁱPr-pybox}]. This complex also reacts with cyclooctadiene (cod) or norbornadiene (nbd) and NaPF₆, in refluxing methanol, giving the coordination compounds [RuCl(η⁴-cod){(S,S)-ⁱPr-pybox}][PF₆] (8) and [RuCl(η⁴-nbd){(S,S)-ⁱPr-pybox}][PF₆] (9). The structures of complexes [RuCl(CO)(PPh₃)(H-pybox)][BF₄] (H-pybox = 2,6-bis(dihydrooxazolin-2′-yl)pyridine) (4), 6 and 8, have been resolved by X-ray diffraction methods. The catalytic activity of the new complexes in transfer hydrogenation of acetophenone has also been examined.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Cyclopalladation of N-phenyl-4-ferrocenylmethylpyrazoles: Crystal structure of [Pd{κ-C,N-C6H4-1-[(3,5-Me2-C3N2)-CH2-(η-C5H4)Fe(η-C5H5)]}Cl(PPh3)] · CH2Cl2

The synthesis and characterization of pyrazole derivatives of general formula [C₆H₄-4-R-1-{(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}] [R = OMe (1a) or H (1b)] with a ferrocenylmethyl substituent are described.The study of the reactivity of compounds 1 with palladium(II) acetate has allowed the isolation of complexes (μ-AcO)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (2) [R = OMe (2a) or H (2b)] that contain a bidentate [C(sp², phenyl), N]⁻ ligand and a central “Pd(μ-AcO)₂Pd” unit.Furthermore, treatment of 2 with LiCl produced complexes (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (3) [R = OMe (3a) or H (3b)] that arise from the replacement of the acetato ligands by the Cl⁻.Compounds 2 and 3 also react with PPh₃ giving the monomeric complexes [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}X(PPh₃)] {X⁻ = AcO⁻ and R = OMe (5a) or H (5b) or X⁻ = Cl⁻ and R = OMe (6a) or H (6b)}, where the phosphine is in a cis-arrangement to the metallated carbon atom. Treatment of 3 with thallium(I) acetylacetonate produced [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}(acac)] (7) [R = OMe (7a) or H (7b)]. Electrochemical studies of the free ligands and the cyclopalladated complexes are also reported. The dimeric complexes 3 also react with MeO₂C-CC-CO₂Me (in a 1:4 molar ratio) giving [Pd{(MeO₂C-CC-CO₂Me)₂C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}Cl] (8) [R = OMe (8a) or H (8b)], which arise from the bis(insertion) of the alkyne into the σ{Pd-C(sp², phenyl)} bond of 3.     

Synthesis and structural characterization of rac-2-[(diphenylphosphino)methyl]ferrocenecarboxylic acid, its selected derivatives and some rhodium complexes

rac-2-[(Diphenylphosphino)methyl]ferrocenecarboxylic acid (1) was prepared in a good yield from rac-2-(N,N-dimethylaminomethyl)bromoferrocene (2) via rac-2-(hydroxymethyl)bromoferrocene (4) and rac-2-[(diphenylphosphino)methyl]bromoferrocene (5), and further converted to the respective phosphine oxide (6), phosphine sulfide (7) and methyl ester (8). The phosphines 1 and 8 were studied as ligands in rhodium complexes. The reaction of di-μ-chloro-bis[chloro-(η⁵-pentamethylcyclopentadienyl)rhodium(III)] with the stoichiometric amounts of 1 and 8 yielded the corresponding mononuclear complexes with P-monodentate ligands: [RhC₂(η⁵-C₅Me₅)(L-κP)], 9 and 10, respectively. Attempted deprotonation of 9 with LiBu or KOt-Bu gave intractable mixtures, in which the parent complex 9 as the major component was accompanied by two new compounds, likely the diastereoizomeric phosphinocarboxylate complexes. A defined O,P-chelating phosphinocarboxylate complex, [SP-4-2]-carbonyl-[rac-2-{(diphenylphosphino)methyl}ferrocenecarboxylato-κ²O,P]-tricyclohexylphosphinerhodium(I) (12), was obtained from the displacement of acetylacetonate(1−) (acac) ligand in [Rh(acac)(CO)(PCy₃)] (Cy = cyclohexyl) with acid 1. The structures of 1, 6 · CHCl₃, and 7 · 1/2 CH₂Cl₂, 10, and hydrated complexes 9 and 12 were determined by single-crystal X-ray diffraction.     

1-Methyl-4-ferrocenylmethyl-3,5-diphenylpyrazole: A versatile ligand for palladium(II) and platinum(II)

The syntheses and characterization of two novel ferrocene derivatives containing 3,5-diphenylpyrazole units of general formula [1-R-3,5-Ph₂-(C₃N₂)-CH₂-Fc] {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄) and R = H (2) or Me (3)} together with a study of their reactivity with palladium(II) and platinum(II) salts or complexes under different experimental conditions is described. These studies have allowed us to isolate and characterize trans-[Pd{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}₂Cl₂] (4a) and three different types of heterodimetallic complexes: cis-[M{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] {M = Pd (5a) or Pt (5b)}, the cyclometallated products [M{κ²-C,N-[3-(C₆H₄)-1-Me-5-Ph-(C₃N₂)]-CH₂-Fc}Cl(L)] with L = PPh₃ and M = Pd (6a) or Pt (6b) or L = dmso and M = Pt (8b) and the trans-isomer of [Pt{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] (7b). In compounds 4a, 5a, 5b and 7b, the ligand behaves as a neutral N-donor group; while in 6a, 6b and 8b it acts as a bidentate [C(sp²,phenyl),N(pyrazole)]⁻ group. A comparative study of the spectroscopic properties of the compounds, based on NMR, IR and UV-Visible experiments, is also reported.     

Anticancer activity of new organo-ruthenium, rhodium and iridium complexes containing the 2-(pyridine-2-yl)thiazole N,N-chelating ligand

The dinuclear dichloro complexes [(η⁶-arene)₂Ru₂(μ-Cl)₂Cl₂] and [(η⁵-C₅Me₅)₂M₂(μ-Cl)₂Cl₂] react with 2-(pyridine-2-yl)thiazole (pyTz) to afford the cationic complexes [(η⁶-arene)Ru(pyTz)Cl]⁺ (arene = C₆H₆1, p-ⁱPrC₆H₄Me 2 or C₆Me₆3) and [(η⁵-C₅Me₅)M(pyTz)Cl]⁺ (M = Rh 4 or Ir 5), isolated as the chloride salts. The reaction of 2 and 3 with SnCl₂ leads to the dinuclear heterometallic trichlorostannyl derivatives [(η⁶-p-ⁱPrC₆H₄Me)Ru(pyTz)(SnCl₃)]⁺ (6) and [(η⁶-C₆Me₆)Ru(pyTz)(SnCl₃)]⁺ (7), respectively, also isolated as the chloride salts. The molecular structures of 4, 5 and 7 have been established by single-crystal X-ray structure analyses of the corresponding hexafluorophosphate salts. The in vitro anticancer activities of the metal complexes on human ovarian cancer cell lines A2780 and A2780cisR (cisplatin-resistant), as well as their interactions with plasmid DNA and the model protein ubiquitin, have been investigated.     

Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

Rhodium(I) complexes with 1′-(diphenylphosphino)ferrocenecarboxylic acid as active and recyclable catalysts for 1-hexene hydroformylation

The rhodium complex trans-[Rh(CO)(Hdpf-κP)(dpf-κ²O,P)] (1), (Hdpf = 1′-(diphenylphosphino)ferrocenecarboxylic acid) was used as an efficient and recyclable catalyst for 1-hexene hydroformylation producing ca. 80% of aldehydes at 10 atm CO/H₂ and 80 °C. After the reaction, unchanged complex 1 was separated from the reaction mixture and used again three times with the same catalytic activity. The effect of modifying ligands, phosphines and phosphites, on the reactivity of 1 was investigated. The active catalytic systems containing 1 or trans-[Rh(CO)(L)(dpf-κ²O,P)] (2) were formed in situ from acetylacetonato rhodium(I) precursors [Rh(CO)₂(acac)] (3) or [RhL(CO)(acac)] (4) and Hdpf or Medpf (L = phosphine, Medpf = methyl ester of Hdpf).     

Synthesis and reactivity of rhodium(III) pentamethylcyclopentadienyl complexes of N-B-PTA(BH3): X-ray crystal structures of [CpRhCl2{N-B}-PTA(BH3)] and [CpRh{N-B-PTA(BH3)}(η-CH2 = CHPh)]

The reaction between 1-boranyl-1,3,5-triaza-7-phosphaadamantane ligand N-B-PTA(BH₃) and [Cp^∗RhCl(μ-Cl)]₂ affords [Cp^∗Rh{N-B-PTA(BH₃)}Cl₂] (3) or [Cp_∗Rh{N-B-PTA(BH₃)}₂Cl]Cl (5) containing one or two P-bonded boronated PTA ligands. The hydride [Cp_∗Rh{N-B-PTA(BH₃)}H₂] (8) was also obtained by reaction of 3 with NaBH₄ and alternatively by direct hydroboration of [Cp^∗Rh(PTA)Cl₂] with excess NaBH₄. Moderately slow hydrolysis of the N-boranyl rhodium complexes affords dihydrogen, H₃BO₃ and the corresponding PTA derivatives, including the water-soluble dihydride [Cp^∗Rh(PTA)H₂] (9). Finally, the reaction of 8 with electron poor alkynes gives the alkene complexes [Cp^∗Rh{N-B-PTA(BH₃)}(η²-CH₂ = CHR)] (R = Ph, 10; C(O)OEt, 11) as a mixture of rotamers η²-coordinated to rhodium without affecting the N-BH₃ moiety. The X-ray crystal structures of 3 and 10 were also obtained and are here discussed.     

Mono- and bis-(2-dimethylaminoethyl)tetramethylcyclopentadienyl zirconium(IV) complexes: synthesis and structural studies in crystalline state and in solutions

A novel half-sandwich Zr(IV) complex [η⁵:η¹-N-C₅(CH₃)₄CH₂CH₂N(CH₃)₂]ZrCl₃ (6) together with zirconocene dichlorides [η⁵-C₅(CH₃)₄CH₂CH₂N(CH₃)₂][η⁵-C₅(CH₃)₅]ZrCl₂ (4) and [η⁵-C₅(CH₃)₄CH₂CH₂N(CH₃)₂]₂ZrCl₂ (5) have been prepared. Complex 6 has been isolated and characterized in three different forms, namely, as an adduct with THF 6a, an adduct with tetrahydrothiophene 6b, and a solvent-free form 6c. Molecular structures of complexes 4, 6b, and 6c have been established by X-ray diffraction analysis. Complex 6c has been shown to be a monomeric solvent-free half sandwich Zr(IV) complex. The dynamic behavior of complex 6a in a non-solvating medium (an equilibrium between 6a and 6c along with a degenerate interconversion of the Zr-C_cp-CH₂-CH₂-N(CH₃)₂-(Zr) pseudo-five-member metallacycle) have been studied by the variable-temperature ¹H and ¹³C{¹H} NMR spectroscopy. The activation parameters for the degenerate five-member cycle interconversion have been elucidated.