Sulfur-rich CpCo(dithiolene) complexes: Isostructural or non-isostructural couples of CpCo(III) with CpNi(III) dithiolene complexes

Eight new sulfur-rich [CpCo(dithiolene)] complexes were synthesized from [Zn(dmit)₂]²⁻ as a starting material. The structures, electrochemical behavior and electronic absorption spectra of the sulfur-rich [CpCo(S₂C₂S₂Y)] complexes could be compared with the early data of analogous Ni complexes. [CpCo(pddt)] (Y = -(CH₂)₃-), [CpCo(dpdt)] (Y = -CH₂C(CH₂)CH₂-), [CpCo(bddt)] (Y = -(CH₂)₄-), [CpCo(dtdt)] (Y = -CH₂SCH₂-) and [CpCo(poddt)] (Y = -CH₂C(O)CH₂-) crystallized in all isostructural with the corresponding paramagnetic [CpNi(dithiolene)] complexes, but [CpCo(dmid)] (Y = CO), [CpCo(dddt)] (Y = -(CH₂)₂-) and [CpCo(F₂pddt)] (Y = -CH₂CF₂CH₂-) crystallized in non-isostructural with them. These molecules are associated with intermolecular short S?S contacts in the crystals. [CpCo(F₂pddt)] did not show any remarkable S?S contacts but indicated interesting fluorine segregation and Cp?Cp face-to-face interactions. Redox potentials of [CpCo(dithiolene)] complexes were obtained with the cyclic voltammetry measurements and dimerized by electrochemical oxidations. Electronic absorption spectra of [CpCo(dithiolene)] complexes showed visible absorption in the range of 585-701 nm as lowest energy wavelengths (? = 9800-11,800 M⁻¹ cm⁻¹) in solutions, and they were higher energy than those of [CpNi(dithiolene)] complexes (near-IR).     

Diverse reactivities of aromaticity-unsaturation coexisted metalladithiolene rings

This review paper summarizes the reactivities of metal dithiolene complexes based on the ‘coexistence of aromaticity and unsaturation’ in the five-membered metallacycle, the so-called metalladithiolene ring (MS₂C₂). The 16-electron [LM(dithiolene)] (LM = CpM^III, Cp*M^III, (C₆R₆)M^II) complexes are coordinatively unsaturated and usually show M-S centered cycloaddition reactions with nucleophiles (e.g. diazoalkanes, organic azides, quadricyclane) and electrophiles (e.g. tetracyanoethylene oxide, activated acetylene). The resulting metalladithiolene cycloadducts, which have three-membered M-S-C or M-S-N rings, further react with protic acids or PR₃ to undergo the ring-opening reactions involving the M-C bond, M-S bond or M-N bond cleavages. Furthermore, diverse adduct dissociations are observed by thermal, photochemical or electrochemical redox reactions. Such reactions normally produce the original [LM(dithiolene)] complexes (non-adduct) and the eliminated fragments. Among them, the Co-S centered imido adduct [CpCo(dithiolene)(NR)] (R = Ts, Ms) reacted under thermal conditions in the presence of PR₃ to undergo the intramolecular imido migration reaction to the Cp ligand, giving [(C₅H₄-NHR)Co(dithiolene)] complexes. The M-S centered multinuclear cluster complexes are obtained by the reaction of [LM(dithiolene)] with low valent M(CO)_n complexes. The square-planar bis(dithiolene) complexes [M(dithiolene)₂]⁰ (M = Ni, Pd, Pt) or tris(dithiolene) complexes [M(dithiolene)₃]⁰ yield cycloaddition products with olefins. These reactions are due to ligand centered reactions made possible by a molecular orbital overlap between dithiolene LUMO and olefin HOMO. Similar ligand centered adducts are obtained by the reaction of dianionic [M(dithiolene)₂]²⁻ with haloalkanes or dihaloalkanes. Also these adducts of bis(dithiolene) complex are dissociated photochemically and electrochemically. This paper also describes the reactivities of organometallic o-carborane dithiolate complexes, which are generally formulated as [LM(S₂C₂B₁₀H₁₀)] (LM = CpCo, Cp*Rh, Cp*Ir, (p-cymene)Ru and (p-cymene)Os). Diverse addition reactions are reported; in particular, the reaction with acetylene involves B-H bond activation in the carborane moiety.     

Synthesis, characterisation and catalytic activities of manganese(III) complexes of pyridoxal-based ONNO donor tetradenatate ligands

Reaction of Mn^II(CH₃COO)₂ with dibasic tetradentate ligands, N,N′-ethylenebis(pyridoxylideneiminato) (H₂pydx-en, I), N,N′-propylenebis(pyridoxylideneiminato) (H₂pydx-1,3-pn, II) and 1-methyl-N,N′-ethylenebis(pyridoxylideneiminato) (H₂pydx-1,2-pn, III) followed by aerial oxidation in the presence of LiCl gives complexes [Mn^III(pydx-en)Cl(H₂O)] (1) [Mn^III(pydx-1,3-pn)Cl(CH₃OH)] (2) and [Mn^III(pydx-1,2-pn)Cl(H₂O)] (3), respectively. Crystal and molecular structures of [Mn(pydx-en)Cl(H₂O)] (1) and [Mn(pydx-1,3-pn)Cl(CH₃OH)] (2) confirm their octahedral geometry and the coordination of ligands through ONNO(2-) form. Reaction of manganese(II)-exchanged zeolite-Y with these ligands in refluxing methanol followed by aerial oxidation in the presence of NaCl leads to the formation of the corresponding zeolite-Y encapsulated complexes, abbreviated herein as [Mn^III(pydx-en)]-Y (4), [Mn^III(pydx-1,3-pn)]-Y (5) and [Mn^III(pydx-1,2-pn)]-Y (6). These encapsulated complexes are used as catalysts for the oxidation, by H₂O₂, of methyl phenyl sulfide, styrene and benzoin efficiently. Oxidation of methyl phenyl sulfide under the optimized reaction conditions gave ca. 86% conversion with two major products methyl phenyl sulfoxide and methyl phenyl sulfone in the ca. 70% and 30% selectivity, respectively. Oxidation of styrene catalyzed by these complexes gave at least five products namely styrene oxide, benzaldehyde, benzoic acid, 1-phenylethane-1,2-diol and phenylacetaldehyde with a maximum of 76.9% conversion of styrene by 4, 76.3% by 5 and 76.0% by 6 under optimized conditions. The selectivity of the obtained products followed the order: benzaldehyde > benzoic acid > styrene oxide > phenylacetaldehyde > 1-phenylethane-1,2-diol. Similarly, ca. 93% conversion of benzoin was obtained by these catalysts, where the selectivity of the products followed the order benzil > benzoic acid > benzaldehyde-dimethylacetal. Tests for the recyclability and heterogeneity of the reactions have also been carried. Neat complexes are equally active. However, the recycle ability of encapsulated complexes makes them better over neat ones.     

Radical CpNi(dithiolene) and CpNi(diselenolene) complexes: Synthetic routes and molecular properties

The formally Ni(III) d⁷ radical organometallic complexes formulated as [CpNi(dithiolene)] can be prepared by different routes involving different CpNi sources such as the Ni^(I) [CpNi(CO)]₂, the Ni^(II) [Cp₂Ni] or [CpNi(cod)]⁺ or the Ni^(III) [Cp₂Ni]⁺ complexes. As dithiolene precursors, the naked dithiolate, the mono- as well as bis-(dithiolene) metal complexes were investigated. The highest yields are generally associated with an appropriate redox match, that is a CpNi^(II) precursor with a formally Ni^(IV) [Ni(dithiolene)₂]⁰ complex, or a CpNi^(III) precursor with a formally Ni^(III) [Ni(dithiolene)₂]^? complex. The structural, electrochemical and spectroscopic (UV–vis–NIR, EPR) properties of more than twenty complexes are described and compared, with the help of DFT calculations. They all exhibit a small optical gap with a low-energy absorption band in the Near Infra-Red region, between 700 and 1000 nm. The smaller electrochemical and optical gap found in the [CpNi(dmit)] and [CpNi(dddt)] complexes is correlated with an extensive delocalisation of the spin density in these complexes, while the other members of the series are characterized with a larger and sizeable spin density on the cyclopentadienyl ring.     

Two near-UV and visible chromophores of CpCo(Dithiolene) complexes with pyridinium-dicyanomethylide group

Tetracyanoethylene oxide (TCNEO) reacted with [CpCo(dithiolene)] (Cp = η⁵-cyclopentadienyl) complexes having 4-pyridyl or 3-pyridyl group to undergo a dicyanomethylation to the nitrogen atom on the pyridyl group. The reaction of [CpCo(S₂C₂(⁴Py)₂)] (1) with TCNEO formed both the monodicyanomethylated [CpCo(S₂C₂(⁴Py)(⁴Py-C(CN)₂))] (1a) and bisdicyanomethylated [CpCo(S₂C₂(⁴Py-C(CN)₂)₂)] (1b). [CpCo(S₂C₂(²Py)(⁴Py))] (2) reacted with TCNEO to give [CpCo(S₂C₂(²Py)(⁴Py-C(CN)₂))] (2a) but no dicyanomethylation occurred on the 2-pyridyl group. 2 reacted with excess TCNEO to form the only dicyanomethylated acetylene derivative ²Py-CC-(⁴Py-C(CN)₂) (2c), followed by a dissociation of the CpCoS₂ fragment. The monodicyanomethylated [CpCo(S₂C₂(ⁿPy-C(CN)₂)(2-thienyl))] (n = 4 (4a) or 3 (5a)) complexes were also prepared from [CpCo(S₂C₂(ⁿPy)(2-thienyl))] (n = 4 (4) or 3 (5)) and TCNEO. 1b was structurally characterized by X-ray diffraction study. The all dicyanomethylated [CpCo(dithiolene)] complexes showed the dithiolene LMCT absorption in the range of 605-644 nm (ε = 7000-9200 M⁻¹ cm⁻¹) and very strong absorption due to their pyridinium-dicyanomethylide moieties in near-UV region (e.g. 1b: λ_max = 470 nm, ε = 43,400 M⁻¹ cm⁻¹). The CV of the all dicyanomethylated complexes exhibited two reduction waves. The first reduction is due to Co^III/Co^II and the second one is due to the reduction of the pyridinium-dicyanomethylide moiety. The reduced 1b⁻ is stable enough for several minutes according to the visible spectroelectrochemical measurement. The ESR spectrum of 1b⁻ indicated eight hyperfine splittings due only to the interaction with the nuclear spin of cobalt (I = 7/2).     

Synthesis and structural characterization of (CH2)n-bridged indenyl-pyrazoles and their cyclopentadienyl nickel(II) complexes

A new class of (CH₂)_n-bridged indenyl-pyrazoles [4-{Ind-(CH₂)_n}-RR′PzH] (Ind = 1H-inden-3-yl, n = 1-3, RR′Pz = 3,5-disubstituted pyrazolato) were synthesized. Reactions of the indenyl-functionalized pyrazoles with nickelocene in refluxing toluene afforded trimetallic and dimetallic cyclopentadienyl nickel(II) complexes, i.e., [CpNi{4-(Ind-(CH₂)_n)-RR′Pz}₂]₂Ni and [CpNi{4-(Ind-(CH₂)_n)-RR′Pz}]₂, depending on the steric hindrance from the 3,5-disubstituents on the pyrazolato rings. In the CpNi(II) complexes, pyrazolato ligands exhibit μ-η¹:η¹ coordination to the metal centers and the indenyl moieties demonstrate no interaction with the metals. All the indenyl-pyrazoles and their complexes were characterized by spectroscopic and analytical methods including X-ray crystallographic study.     

N,N′-Bis(aryl)pyridine-2,6-dicarboxamide complexes of ruthenium: Synthesis,structure and redox properties

Reaction of five N,N′-bis(aryl)pyridine-2,6-dicarboxamides (H₂L-R, where H₂ denotes the two acidic protons and R (R = OCH₃, CH₃, H, Cl and NO₂) the para substituent in the aryl fragment) with [Ru(trpy)Cl₃](trpy = 2,2′,2″-terpyridine) in refluxing ethanol in the presence of a base (NEt₃) affords a group of complexes of the type [Ru^II(trpy)(L-R)], each of which contains an amide ligand coordinated to the metal center as a dianionic tridentate N,N,N-donor along with a terpyridine ligand. Structure of the [Ru^II(trpy)(L-Cl)] complex has been determined by X-ray crystallography. All the Ru(II) complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on the [Ru^II(trpy)(L-R)] complexes shows a Ru(II)–Ru(III) oxidation within 0.16–0.33 V versus SCE. An oxidation of the coordinated amide ligand is also observed within 0.94–1.33 V versus SCE and a reduction of coordinated terpyridine ligand within −1.10 to −1.15 V versus SCE. Constant potential coulometric oxidation of the [Ru^II(trpy)(L-R)] complexes produces the corresponding [Ru^III(trpy)(L-R)]⁺ complexes, which have been isolated as the perchlorate salts. Structure of the [Ru^III(trpy)(L-CH₃)]ClO₄ complex has been determined by X-ray crystallography. All the Ru(III) complexes are one-electron paramagnetic, and show anisotropic ESR spectra at 77 K and intense LMCT transitions in the visible region. A weak ligand-field band has also been shown by all the [Ru^III(trpy)(L-R)]ClO₄ complexes near 1600 nm.     

CpNi(dithiolene)] (and diselenolene) neutral radical complexes

Various preparations of the neutral radical [CpNi(dddt)] complex (dddt = 5,6-dihydro-1,4-dithiin-2,3-dithiolate) were investigated with CpNi sources, [Cp2Ni], [Cp2Ni](BF4), [CpNi(CO)]2, and [CpNi(cod)](BF4), and dithiolene transfer sources, O=C(dddt), the naked dithiolate (dddt(2-)), the monoanion of square-planar Ni dithiolene complex (NBu4)[Ni(dddt)2], and the neutral complex [Ni(dddt)2]. The reaction of [CpNi(cod)](BF4) with (NBu4)[Ni(dddt)2] gave the highest yield for the preparation of [CpNi(dddt)] (86%). [CpNi(ddds)] (ddds = 5,6-dihydro-1,4-dithiin-2,3-diselenolate), [CpNi(dsdt)] (dsdt = 5,6-dihydro-1,4-diselenin-2,3-dithiolate), [CpNi(bdt)] (bdt = 1,2-benzenedithiolate), and [CpNi(bds)] (bds = 1,2-benzenediselenolate) were synthesized by the reactions of [Cp2Ni] with the corresponding neutral Ni dithiolene complexes [Ni(ddds)2]2, [Ni(dsdt)2], [Ni(bdt)2], and [Ni(bds)2], respectively. The five, formally Ni(III), radical complexes oxidize and reduce reversibly. They exhibit, in the neutral state, a strong absorption in the NIR region, from 1000 nm in the dddt/ddds/dsdt series to 720 nm in the bdt/bds series with epsilon values between 2500 and 5000 M(-1) cm(-1). The molecular and solid state structures of the five complexes were determined by X-ray structure analyses. [CpNi(dddt)] and [CpNi(ddds)] are isostructural, while [CpNi(dsdt)] exhibits a closely related structure. Similarly, [CpNi(bdt)] and [CpNi(bds)] are also isostructural. Correlations between structural data and magnetic measurements show the presence of alternated spin chains in [CpNi(dddt)], [CpNi(ddds)], and [CpNi(dsdt)], while a remarkably strong antiferromagnetic interaction in [CpNi(bdt)] and [CpNi(bds)] is attributed to a Cp...Cp face-to-face sigma overlap, an original feature in organometallic radical complexes.     

Structural and spectroscopic trends in mononuclear arylchalcogenolato-palladium(II) and -platinum(II) complexes: Crystal structures of [M(TeAr)2(dppe)] {M = palladium, platinum; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane}

A series of mononuclear [M(EAr)₂(dppe)] [M = Pd, Pt; E = Se, Te; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane] complexes has been prepared in good yields by the reactions of [MCl₂(dppe)] and corresponding ArE⁻ with a special emphasis on the aryltellurolato palladium and -platinum complexes for which the existing structural information is virtually non-existent. The complexes have crystallized in five isomorphic groups: (1) [Pd(SePh)₂(dppe)] and [Pt(SePh)₂(dppe)], (2) [Pd(TePh)₂(dppe)] and [Pt(TePh)₂(dppe)], (3) [Pd(SeTh)₂(dppe)], (4) [Pt(SeTh)₂(dppe)] and [Pd(TeTh)₂(dppe)], and (5) [Pt(TePh)₂(dppe)]. In addition, solvated [Pd(TePh)₂(dppe)] · CH₃OH and [Pd(TeTh)₂(dppe)] · 1/2CH₂Cl₂ could be isolated and structurally characterized. The metal atom in each complex exhibits an approximate square-planar coordination. The Pd-Se, Pt-Se, Pd-Te, and Pt-Te bonds span a range of 2.4350(7)-2.4828(7) Å, 2.442(1)-2.511(1) Å, 2.5871(7)-2.6704(8) Å, and 2.6053(6)-2.6594(9) Å, respectively, and the respective Pd-P and Pt-P bond distances are 2.265(2)-2.295(2) Å and 2.247(2)-2.270(2) Å. The orientation of the arylchalcogenolato ligands with respect to the M(E₂)(P₂) plane has been found to depend on the E-M-E bond angle. The NMR spectroscopic information indicates the formation of only cis-[M(EAr)₂(dppe)] complexes in solution. The trends in the ³¹P, ⁷⁷Se, ¹²⁵Te, and ¹⁹⁵Pt chemical shifts expectedly depend on the nature of metal, chalcogen, and aryl group. Each trend can be considered independently of other factors. The ⁷⁷Se or ¹²⁵Te resonances appear as second-order multiplets in case of palladium and platinum complexes, respectively. Spectral simulation has yielded all relevant coupling constants.     

CpCo(dithiolene) complexes of highly flexible oxddt ligand with two different Z-shaped and U-shaped structures

[CpCo(oxddt)] complex (2, oxddt = o-xylenediyldithioethylene-1,2-dithiolate, Cp = η⁵-cyclopentadienyl) was obtained from o-xylenediyldithioethylene-1,3-dithiol-2-one (OC(oxddt)) (1). 2 further reacted with diazoalkanes (N₂CHR) to form some alkylidene-bridged adducts [CpCo(CHR)(oxddt)] (R = H (3a), SiMe₃ (3b)). Adduct 3a further reacted with protic acids (HX) to give some S-methylated adducts [CpCo(X)(oxddt)(S-Me)] (X = Cl (4a), OCOCF₃ (4c)), followed by the Co-C bond cleavage in the three-membered cobaltathiirane ring. Two different Z-shaped and U-shaped molecular structures were observed by X-ray diffraction studies. In the former structure (Z), the dithiolene and o-xylylene planes are located at almost parallel position each other, and in the latter structure (U), both planes are not parallel but the o-xylylene moiety is located closer to the dithiolene plane than the Z-shaped one. The Z-shaped structure involves 1 and 2. The U-shaped structure involves 3a, 3b, 4a and 4c. Complex 1 showed a one-dimensional chain through intermolecular π-π interaction in the crystal. Complex 2 had a dimeric interaction between dithioethylenedithiolate moieties (S₂C₂S₂) in the oxddt. The SiMe₃ group in 3b was placed at an exo-position with respect to the cobaltadithiolene ring due to a steric hindrance from the U-shaped oxddt ligand. In 4a, the X and Me groups are located at the opposite side of the dithiolene plane (anti-form) but in 4c, both groups are presented at the same side of the dithiolene plane (syn-form). The NMR analysis of 4a in solution indicated existence of both anti- and syn-isomers (7:1).     

(18-Crown-6)potassium tetrachloroferrate(III), dibromodichloroferrate(III), and tetrabromoferrate(III): Synthesis and crystal structures

Three new crystalline complexes are synthesized: [K(18-crown-6)]⁺ · An, where An = [FeCl₄]^?(I), [FeBr₂Cl₂]^? (II), and [FeBr₄]^? (III). The crystals of compounds I–III are cubic and isomorphic, space group Fd $ \bar 3 Three new crystalline complexes are synthesized: [K(18-crown-6)]⁺ · An, where An = [FeCl₄]⁻(I), [FeBr₂Cl₂]⁻ (II), and [FeBr₄]⁻ (III). The crystals of compounds I–III are cubic and isomorphic, space group Fd (Z = 16): a = 20.770(2) ? for I, 20.844(3) ? for II, and 20.878(4) ? for III. Structures I–III are solved by a direct method and refined by the full-matrix least-squares method in the anisotropic approximation to R = 0.047 (I), 0.059 (II), and 0.098 (III) for all 680 (I), 684 (II), and 686 (III) independent reflections. In two tetrahedral anions [Fe(1)X₄]⁻ and [Fe(2)X₄]⁻ in structures I–III, all halogen atoms (X = Cl and Br) are randomly disordered over three close positions relative to the crystallographic axes 3. Structures I–III contain the [K(18-crown-6)]⁺ host-quest complex cation. The K⁺ cation (CN = 8) resides in the cavity of the 18-crown-6 ligand and coordinated by its six O atoms and two disordered halogen X atoms. The coordination polyhedron of the K⁺ cation in complexes I–III is a distorted hexagonal bipyramid. Original Russian Text ? A.N. Chekhlov, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 9, pp. 1566–1570.     

Kinetics of the oxidation of iodide by copper(III)-imine-oxime complexes

Summary The copper(III)-imine-oxime complexes [Cu^III(Enio)]⁺ and [Cu^III(Pre)]⁺ {EnioH₂ =N,N-ethylene bis(isonitrosoacetylacetoneimine) and PreH₂ = N,N-propylene bis (isonitrosoacetylacetoneimine)} react very rapidly with iodide. The rate law under fixed conditions for the reaction is given by the equation: –d[Cu^III]/dt = (2k₂[I^–] + 2k₃[I^–]²)[Cu^III] The [Cu^III(Enio)]⁺ reaction was pH-independent whereas the [Cu (Pre)]⁺ reaction rate increased with increasing pH. Both the k₂ and the k₃ pathways are believed to involve one-electron transfer. An inner-sphere mechanism may operate in the pathway, first-order in [I^–].     

Rhenium(I), (III) and (V) complexes of tridentate ONX (X = O,N, S)-donor Schiff bases

The reactions of the potentially tridentate Schiff bases 2-[(2-hydroxyphenyl)iminomethyl]phenol (H₂ono) and 2-(2-aminobenzylideneimino)phenol (H₃onn) with trans-[ReOBr₃(PPh₃)₂] were studied, and the complexes [Re^IIIBr(PPh₃)₂(ono)] (1) and [Re^VBr(PPh₃)₂(onn)]Br (2) were isolated. In 1ono acts as a dianionic tridentate ligand, and in 2onn is coordinated as a tridentate trianionic imido-imino-phenolate. The complex [Re^I(CO)₃(ons)(Hno)] was isolated from the reaction of [Re(CO)₅Br] with 2-[(2-methylthio)benzylideneimino]phenol (Hons; Hno = 2-aminophenol), with ons coordinated as a bidentate chelate with a free SCH₃ group. These complexes were characterized by X-ray crystallography, NMR and IR spectroscopy.     

Conformational study of Co(II), Ni(II), and Cr(III) complexes of the edta-type: Crystal structure of 1D polymeric trans(O)-Ba[Co(1,3-pddadp)] · 8H2O complex stabilized by infinite water tapes

The trans(O⁶) isomer of the Ba[Co(1,3-pddadp)] · 8H₂O complex (where 1,3-pddadp represents hexadentate 1,3-propanediamine-N,N′-diacetate-N,N′-di-3-propionate ion) has been prepared and characterized by X-ray crystallography. In the crystal structure the complex cations and anions are bridged by carboxylate oxygen atoms from the in-plane coordinated glycinate rings (G-rings) of [Co(1,3-pddadp)]²⁻ and by the barium-coordinated water molecules, thus forming 1D polymeric chains, separated by infinite water tapes hydrogen bonded to the [Co(1,3-pddadp)]²⁻ carboxylate oxygens from the out-of-plane β-alaninate rings (R-rings). Conformational analysis of the three possible geometrical isomers: trans(O⁵), trans(O⁵O⁶), and trans(O⁶) of the [Co(1,3-pddadp)]²⁻ complex, with ligand acting as hexadentate, as well as of the corresponding complexes of Ni(II) and Cr(III) has been performed using the consistent force field (CFF) method, with the parameters developed previously for edta-type complexes of chromium(III) and supplemented with new parameters for cobalt(II) and nickel(II). The energy-minimized structure of the trans(O⁵O⁶) isomer represents the global minimum for the [M(1,3-pddadp)]ⁿ⁻ (M = Co(II), Ni(II), and Cr(III)) species. The occurrence of the least energetically favored trans(O⁶) isomer in a crystal and the exceptional conformation of the axially oriented β-alaninate rings can be accounted for by the stabilizing role of the infinite tapes of planar cyclic water pentamers and hexamers which act as a “glue” to reinforce the coordination polymeric chains.     

Copper(I) halide complexes with 2,2′-bis(diphenylphosphano)-1,1′-binaphthyl (rac-binap) and heterocyclic thiones. Racemic compounds in chiral and achiral crystal space groups

Reactions of copper(I) halides with racemic 2,2′-bis(diphenylphosphano)-1,1′-binaphthyl (rac-binap) in 1:1 molar ratio afforded mononuclear complexes of the type [CuX(rac-binap)] (X = Cl, Br, I) which, on further treatment with 1 equiv. of pyridine-2-thione (py2SH), pyrimidine-2-thione (pymtH) or 4,6-dimethyl-pyrimidine-2-thione (dmpymtH) gave rise to the formation of mixed-ligand complexes of the formula [CuX(rac-binap)(thione)]. The molecular structures of [CuBr(rac-binap)(py2SH)] · 2CH₂Cl₂, [CuBr(rac-binap)(py2SH)] · CH₂Cl₂ and [CuBr(rac-binap)(dmpymtH)] · CH₂Cl₂ have been established by single-crystal X-ray diffraction. Each of the complexes features a distorted tetrahedral copper(I) center with the phosphane acting in a chelating fashion. The complexes are strongly luminescent in the solid state at ambient temperature. Unusually, the [CuBr(rac-binap)(py2SH)] · 2CH₂Cl₂ molecules crystallise in a chiral space group with independent S- and R-enantiomers in the asymmetric unit.     

Syntheses and reactivities of azido coordinated CpCo(dithiolene) complexes

Azido coordinated dithiolene complexes [CpCo(N₃){S₂C₂(CO₂Me)₂}(S-CHR¹R²)], where R¹, R² = H (4a); R¹ = H, R² = SiMe₃ (4b); R¹ = H, R² = CO₂Et (4c), were synthesized by the reactions of the corresponding Cl⁻ coordinated precursors [CpCo(Cl){S₂C₂(CO₂Me)₂}(S-CHR¹R²)] (3a-3c) with sodium azide. The Cl⁻ coordinated complex 3d (R¹, R² = CO₂Me) did not produce any N₃⁻ coordinated complexes but formed the CR¹R²-bridged alkylidene adduct [CpCo{S₂C₂(CO₂Me)₂}(CR¹R²)] (2d; R¹, R² = CO₂Me). The structure of 4a was determined by X-ray diffraction study. In the molecular structure of 4a, the coordinated N₃⁻ ligand and CHR¹R² group were located at the same side with respect to the dithiolene ring (syn form), although the corresponding Cl⁻ precursor (3a; R¹, R² = H) was anti form. A structural conversion of syn/anti was conceivable during the Cl⁻/N₃⁻ ligand exchange. Thermal (80 °C) and photochemical reactions (Hg lamp) of 4a-4c were performed. Among them, 4c was relatively well reacted compared with the others to form the CR¹R²-bridged alkylidene adduct (2c; R¹ = H, R² = CO₂Et), followed by a formal HN₃ elimination, and the reaction also produced non-adduct of the cobalt dithiolene complex [CpCo{S₂C₂(CO₂Me)₂}] (1). The electrochemical 1e⁻ reduction of 4c underwent a formal N₃⁻ ligand elimination, and successive second reduction caused the CHR¹R² group elimination or reformed the CR¹R²-bridged alkylidene adduct 2c.     

Reactions of the metallocene dichlorides [M(Cp)2Cl2] (M = Zr, Hf) and [Ti(MeCp)2Cl2] with the pyridine-2,6-dicarboxylate(−2) ligand: Synthesis, spectroscopic characterization and X-ray structures of the products

The reactivity pattern of the 16-electron species [M(Cp)₂Cl₂] (M = Zr, Hf; Cp⁻ = η⁵-C₅H₅⁻) and [Ti(MeCp)₂Cl₂] (MeCp⁻ = η⁵-C₅H₄CH₃⁻) towards the dipicolinate(−2) (dipic²⁻) ligand under mild (ambient temperature) and convenient (aerobic reactions, aqueous media) conditions have been investigated. The syntheses, molecular structures and spectroscopic (IR, ¹H NMR) characterization are reported for the 18-electron products [Zr(Cp)₂(dipic)] (1), [Hf(Cp)₂(dipic)] (2) and [Ti(MeCp)₂(dipic)] (3). The dipic²⁻ ion behaves as N,O,O′-chelating ligand in the three complexes, while the centroids of the Cp⁻ (1, 2) and MeCp⁻ (3) rings formally occupy the fourth and fifth coordination sites about the central metal. The two identical/very similar bite angles of only ∼70° make the dipic²⁻ ligand particularly suited to form stable metallocene derivatives with 5-coordinate geometry. IR and ¹H NMR data are discussed in terms of the known structures and the tridentate chelating mode of the dipic²⁻ ligand.     

N-substituted salicylaldimine complexes of rhodium(III) and related rhodium(III) organometallic derivatives

A series of new Rh^III complexes with N-substituted salicylaldimines have been prepared of the form [RhSBPy₂]PF₆ where SB is a tetradentate N,N′-substituted bis(salicylaldimine) or represents two molecules of a corresponding bidentate derivative. Several of these complexes have been reduced with 0.5% sodium amalgam and the products reacted with CH₃I to yield the organometallic derivatives CH₃RhSBPy.     

Sulfur-alkylation-initiated CpRu thiyl radicals

The formation of thiyl radicals from [Cp^∗Ru^III{κ³SSS′-tpdt}] (1A) and [Cp^∗Ru^III{κ³SSN-apdt}] (1B) {Cp^∗ = η⁵-C₅Me₅; tpdt = S(CH₂CH₂S⁻)₂; apdt = HN(CH₂CH₂S⁻)₂} has been initiated by thiolate alkylation or oxidation with iodine. Subsequent electron transfer processes yielded disulfide-bridged dinuclear complexes. The mechanistic pathways of these processes will be discussed.     

Ruthenium(III) complexes of amine-bis(phenolate) ligands as catalysts for transfer hydrogenation of ketones

Twelve ruthenium(III) complexes bearing amine-bis(phenolate) tripodal ligands of general formula [Ru(L¹–L³)(X)(EPh₃)₂] (where L¹–L³ are dianionic tridentate chelator) have been synthesized by the reaction of ruthenium(III) precursors [RuX₃(EPh₃)₃] (where E = P, X = Cl; E = As, X = Cl or Br) and [RuBr₃(PPh₃)₂(CH₃OH)] with the tripodal tridentate ligands H₂L¹, H₂L² and H₂L³ in benzene in 1:1 molar ratio. The newly synthesized complexes have been characterized by analytical (elemental and magnetic susceptibility) and spectral methods. The complexes are one electron paramagnetic (low-spin, d⁵) in nature. The EPR spectra of the powdered samples at RT and the liquid samples at LNT shows the presence of three different ‘g’ values (g_x ≠ g_y ≠ g_z) indicate a rhombic distortion around the ruthenium ion. The redox potentials indicate that all the complexes undergo one electron transfer process. The catalytic activity of one of the complexes [Ru(pcr-chx)Br(AsPh₃)₂] was examined in the transfer hydrogenation of ketones and was found to be efficient with conversion up to 99% in the presence of isopropanol/KOH.