Backbone modified small bite-angle diphosphines: Synthesis and molecular structures of [M(CO)4{X2PC(RR)PX2}] (M = Mo, W; X = Ph, Cy; R = H, Me, Et, Pr, allyl, R = Me, allyl)

A range of new small bite-angle diphosphine complexes, [M(CO)₄{X₂PC(R¹R²)PX₂}] (M = Mo, W; X = Ph, Cy; R¹ = H, Me, Et, Pr, allyl, R² = Me, allyl), have been prepared via elaboration of the methylene backbones in [M(CO)₄(X₂PCH₂PX₂)] as a result of successive deprotonation and alkyl halide addition. When X = Ph it proved possible to replace both methylene protons but for X = Cy only one substitution proved possible. This is likely due to the electron-releasing nature of the cyclohexyl groups but may also be due to steric constraints. Attempts to prepare the bis(allyl) substituted complex [Mo(CO)₄{Ph₂PC(allyl)₂PPh₂}] were only moderately successful. The crystal structures of nine of these complexes are presented.     

Reactivity of ZrCl4 and HfCl4 with silylamines and thermal decomposition of the compounds [MCl4{NH(R)(SiR′3)}] (M = Zr,Hf, R = tBu,R′ = Me; R = SiR′3 = SiMe3, SiMe2H)

The Lewis acid/base adducts [MCl₄{NH(R)(SiR′₃)}] (M = Zr, Hf; R = tBu, R′ = Me; R = SiR′₃ = SiMe₃, SiMe₂H) were synthesized by the 1:1 reaction of MCl₄ with NH(R)(SiR′₃) in dichloromethane solution at room temperature. The decomposition of [MCl₄{NH(R)(SiR′₃)}] proceeds with the elimination of R′₃SiCl, as shown by thermogravimetric analysis. Pyrolysis of the compounds at 620 °C under inert conditions (N₂, vacuum) afforded powders of composition [ClMN] or [Cl₂MNH]. Preliminary low pressure chemical vapour deposition experiments show that [MCl₄{NH(R)(SiR′₃)}] deposits thin films of metal nitride contaminated with metal oxide.     

Synthesis and characterization of metal diselenophosphates: M[Se2P(OR)2]2 (M = Pd,Pt; R = Et,Pr, Pr)

The first Pd(II) and Pt(II) complexes incorporating diselenophosphate (dsep) ligands are presented. Treatment of M(II) (M = Pd, Pt) salts with two equivalents of the dsep ligand in CH₂Cl₂ yielded square-planar compounds of the type M[Se₂P(OR)₂]₂ (M = Pd, Pt; R = Et, ⁱPr, ⁿPr) (1a–2c). These complexes were characterized by elemental analysis, multinuclear NMR spectroscopy and X-ray diffraction (1b and 2b). The dsep ligands coordinate to the metal in an approximately isobidentate fashion and form four-membered Se–P–Se–M chelate rings. Structural elucidations indicated that minute differences exist in the M–Se bond distances and these were observed from solution ³¹P NMR studies, which exhibited two sets of satellites arising from one-bond coupling to ⁷⁷Se nuclei. A packing diagram showed a chain-like motif which was composed of square-planar M[Se₂P(OR)₂]₂ units and occurred via non-covalent Se?Se secondary interactions.     

Si-Fluoro substituted quasisilatranes (N → Si) FYSi(OCH2CH2)2NR

The reaction of fluorosilanes XYSiF₂ (X = Y = F; X = F, Y = Ph; X = Ph, Y = Me) with diethanolamines and their O-trimethylsilyl derivatives affords novel Si-fluoro substituted quasisilatranes 3, 5 and 9. These compounds were characterized by the multinuclear NMR spectroscopy and X-ray diffraction analysis. Experimental and theoretically calculated electron density distribution functions in crystal structure of 9 have shown that the N → Si coordination bond corresponds to polar bond with pronounced ionic contribution. Calculated N → Si bond order in the compound 9 does not exceed 1/3 of the normal Si-N bond. A strong N → Si coordination bond exists in compounds 3, 5 and 9 the length of which varies in the range 1.98-2.175 Å.     

New examples of mixed organochalcogene compounds: Synthesis, structural features and spectroscopic data of [PhSe(etu)][PhTeX4] (Ph = phenyl; etu = ethylenethiourea; X = Br, I)

(PhSe)₂ reacts with Br₂, ethylenethiourea and PhTeBr₃, further with I₂, ethylenethiourea and PhTeI₃, to give [PhSe(etu)][PhTeBr₄] (1) (Ph = phenyl; etu = ethylenethiourea) and [PhSe(etu)][PhTeI₄] (2) in very good yields.The tellurium centers present a distorted octahedral configuration, achieved through dimerization involving secondary, reciprocal Te···X interactions.In both compounds the anionic dimmers are linked through X···X interactions, attaining a one-dimensional, polymeric assembly along the b axis. Cations and anions are linked through short Se···X contacts. In addition to single crystal X-ray data, multinuclear NMR results for 1 and 2 are also presented and discussed.     

Pentabenzylcyclopentadienyl molybdenum and tungsten hydrides: Syntheses, structures and electrochemistry of [MHCp(CO)2(L)] (L = CO, PMe3, PPh3)

Complexes [MHCp^Bz(CO)₂(PR₃)] (R = CH₃, M = Mo (1); M = W (2); R = Ph, M = Mo (3); Cp^Bz = C₅(CH₂Ph)₅) were prepared by thermal decarbonylation of the corresponding [MHCp^Bz(CO)₃] in the presence of trimethyl- or triphenyl-phosphine. In solution the NMR spectra of all compounds show the presence of cis and trans isomers that interconvert at room temperature. In the solid state the molecular structures obtained for compounds 1 and 2 correspond to the trans isomers, while for 3 the cis isomer is present.The electrochemistry of [MoHCp^Bz(CO)₂(PMe₃)] (1), [MoHCp^Bz(CO)₃] (5), [WHCp^Bz(CO)₃] (6), [WCp^Bz(CO)₃]₂ (7), and [MCp^Bz(CO)₃(CH₃CN)]BF₄ (8), is described. The cleavage of M-H bonds takes place upon oxidation or reduction. Cations [MCp^Bz(CO)₂L(CH₃CN)]⁺ form in solvent-assisted M-H bond breaking upon oxidation of [MHCp^Bz(CO)₂L] (L = PMe₃, CO). Reduction of [MHCp^Bz(CO)₃] gives [MCp^Bz(CO)₃]⁻ and H₂. The presence of one PMe₃ ligand lowers the reduction potential and precludes the observation of reduction waves.     

Synthesis and coordinating properties of the facultative Sb2O- and As2O-donor ligands O{(CH2)2ER2}2 (E = Sb or As; R = Ph or Me)

The new mixed Sb₂O-donor ligands O{(CH₂)₂SbR₂}₂ (R = Ph, 1; R = Me, 2) with flexible backbones have been prepared in good yields as air-sensitive oils from reaction of NaSbR₂ with 0.5 mol equivalents of O(CH₂CH₂Br)₂ in thf solution. The As₂O-donor analogues, O{(CH₂)₂AsR₂}₂ (R = Ph, 3; R = Me, 4) were obtained similarly from LiAsPh₂ or NaAsMe₂, respectively and O(CH₂CH₂Br)₂, although ligand 4 appears to be considerably less stable with respect to C-O bond fission under some conditions than the other ligands. Using O(CH₂CH₂Cl)₂ leads only to partial substitution by the SbPh₂⁻ or AsPh₂⁻ nucleophile. These ligands behave as bidentate chelating Sb₂- or As₂-donors in the distorted tetrahedral [M(L-L)₂]BF₄ (M = Cu or Ag; L-L = 1-4) on the basis of solution ¹H and ⁶³Cu NMR spectroscopic studies, mass spectrometry and microanalyses. Crystal structures of three representative examples with Cu(I) and Ag(I) confirm the distorted tetrahedral Sb₄ or As₄ coordination at the metal and allow comparisons of geometric parameters. The crystallographic identification of an unexpected Cu(I)-Cu(I) complex, [Cu₂{Me₂As(CH₂)₂OH}₃](BF₄)₂, obtained as a by-product via C-O bond fission within ligand 4 is also reported. The distorted octahedral [RhCl₂(L-L)₂]Cl and the distorted square planar cis-[PtCl₂(L-L)] (L-L = 1 or 2) are also described. The ether O atoms are not involved in coordination to the metal ion in any of the late transition metal complexes isolated.     

Energy analysis of metal-metal bonding in [RM-MR] (M = Zn, Cd, Hg; R = CH3, SiH3, GeH3, C5H5, C5Me5)

The metal-metal bonds of the title compounds have been investigated with the help of energy decomposition analysis at the DFT/TZ2P level. In good agreement with experiment, computations yield Hg-Hg bond distance in [H₃SiHg-HgSiH₃] of 2.706 Å and Zn-Zn bond distance in [(η⁵-C₅Me₅)Zn-Zn(η⁵-C₅Me₅)] of 2.281 Å. The Cd-Cd bond distances are longer than the Hg-Hg bond distances. Bond dissociation energies (-BDE) for Zn-Zn bonds in zincocene −70.6 kcal/mol in [(η⁵-C₅H₅)₂Zn₂] and −70.3 kcal/mol in [(η⁵-C₅Me₅)₂Zn₂] are greater amongst the compounds under study. In addition, [(η⁵-C₅H₅)₂M₂] is found to have a binding energy slightly larger than those in [(η⁵-C₅Me₅)₂M₂]. The trend of the M-M bond dissociation energy for the substituents R shows for metals the order GeH₃ < SiH₃ < CH₃ < C₅Me₅ < C₅H₅. Electrostatic forces between the metals are always attractive and they are strong (−75.8 to −110.5 kcal/mol). The results demonstrate clearly that the atomic partial charges cannot be taken as a measure of the electrostatic interactions between the atoms. The orbital interaction (covalent bonding) ΔE_orb is always smaller than the electrostatic attraction ΔE_elstat. The M-M bonding in [RM-M-R] (R = CH₃, SiH₃, GeH₃, C₅H₅, C₅Me₅; M = Zn, Cd, Hg) has more than half ionic character (56-64%). The values of Pauli repulsions, ΔE_Pauli, electrostatic interactions, ΔE_elstat, and orbital interactions, ΔE_elstat are larger for mercury compounds as compared to zinc and cadmium.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Structural and spectroscopic trends in mononuclear arylchalcogenolato-palladium(II) and -platinum(II) complexes: Crystal structures of [M(TeAr)2(dppe)] {M = palladium, platinum; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane}

A series of mononuclear [M(EAr)₂(dppe)] [M = Pd, Pt; E = Se, Te; Ar = phenyl, 2-thienyl; dppe = 1,2-bis(diphenylphosphino)ethane] complexes has been prepared in good yields by the reactions of [MCl₂(dppe)] and corresponding ArE⁻ with a special emphasis on the aryltellurolato palladium and -platinum complexes for which the existing structural information is virtually non-existent. The complexes have crystallized in five isomorphic groups: (1) [Pd(SePh)₂(dppe)] and [Pt(SePh)₂(dppe)], (2) [Pd(TePh)₂(dppe)] and [Pt(TePh)₂(dppe)], (3) [Pd(SeTh)₂(dppe)], (4) [Pt(SeTh)₂(dppe)] and [Pd(TeTh)₂(dppe)], and (5) [Pt(TePh)₂(dppe)]. In addition, solvated [Pd(TePh)₂(dppe)] · CH₃OH and [Pd(TeTh)₂(dppe)] · 1/2CH₂Cl₂ could be isolated and structurally characterized. The metal atom in each complex exhibits an approximate square-planar coordination. The Pd-Se, Pt-Se, Pd-Te, and Pt-Te bonds span a range of 2.4350(7)-2.4828(7) Å, 2.442(1)-2.511(1) Å, 2.5871(7)-2.6704(8) Å, and 2.6053(6)-2.6594(9) Å, respectively, and the respective Pd-P and Pt-P bond distances are 2.265(2)-2.295(2) Å and 2.247(2)-2.270(2) Å. The orientation of the arylchalcogenolato ligands with respect to the M(E₂)(P₂) plane has been found to depend on the E-M-E bond angle. The NMR spectroscopic information indicates the formation of only cis-[M(EAr)₂(dppe)] complexes in solution. The trends in the ³¹P, ⁷⁷Se, ¹²⁵Te, and ¹⁹⁵Pt chemical shifts expectedly depend on the nature of metal, chalcogen, and aryl group. Each trend can be considered independently of other factors. The ⁷⁷Se or ¹²⁵Te resonances appear as second-order multiplets in case of palladium and platinum complexes, respectively. Spectral simulation has yielded all relevant coupling constants.     

Some complexes containing carbon chains end-capped by M(CO)2Tp′ [M = Mo, W; Tp′ = HB(pz)3, HB(dmpz)3] groups

Complexes M(CCCSiMe₃)(CO)₂Tp′ (Tp′ = Tp [HB(pz)₃], M = Mo 2, W 4; Tp′ = Tp^∗ [HB(dmpz)₃], M = Mo 3) are obtained from M(CCCSiMe₃)(O₂CCF₃)(CO)₂(tmeda) (1) and K[Tp′].Reactions of 2 or 4 with AuCl(PPh₃)/K₂CO₃ in MeOH afforded M{CCCAu(PPh₃)}(CO)₂Tp′ (M = Mo 5, W 6) containing C₃ chains linking the Group 6 metal and gold centres.In turn, the gold complexes react with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ to give the C₄-bridged {Tp(OC)₂M}CCCC{Co₃(μ-dppm)(CO)₇} (M = Mo 7, W 8), while Mo(CBr)(CO)₂Tp^∗ and Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ give {Tp^∗(OC)₂Mo}C(CC)₂C{Co₃(μ-dppm)(CO)₇} (9) via a phosphine-gold(I) halide elimination reaction. The C₃ complexes Tp′(OC)₂MCCCRu(dppe)Cp^∗ (Tp′ = Tp, M = Mo 10, W 11; Tp′ = Tp^∗, M = Mo 12) were obtained from 2-4 and RuCl(dppe)Cp^∗ via KF-induced metalla-desilylation reactions. Reactions between Mo(CBr)(CO)₂Tp^∗ and Ru{(CC)_nAu(PPh₃)}(dppe)Cp^∗ (n = 2, 3) afforded {Tp^∗(OC)₂Mo}C(CC)_n{Ru(dppe)Cp^∗} (n = 2 13, 3 14), containing C₅ and C₇ chains, respectively. Single-crystal X-ray structure determinations of 1, 2, 7, 8, 9 and 12 are reported.     

Bicyclic phosphines as ligands for cobalt catalysed hydroformylation. Crystal structures of [Co(Phoban[3.3.1]-Q)(CO)(3)](2) (Q = C(2)H(5), C(5)H(11), C(3)H(6)NMe(2), C(6)H(11))

A range of tertiary bicyclic phosphine ligands derived from cis, cis-1,5-cyclooctadiene (Phoban family) was studied by batch autoclave reactions during the hydroformylation of a mixture of linear internal decenes using a cobalt catalyst system. Comparative runs were performed with PBu(3) as representative of standard trialkyl phosphine behaviour. The Phoban ligands comprise of a cyclooctyl bicycle with a mixture of the [3.3.1] and [4.2.1] isomers where the third substituent was systematically varied, Phoban-Q (Q = CH(2)CH(3), (CH(2))(4)CH(3), (CH(2))(9)CH(3), (CH(2))(19)CH(3), (CH(2))(3)N(CH(3))(2), C(6)H(11) and C(6)H(5)). An increase in ligand concentration resulted in a decrease in the reaction rate while the selectivity towards the n-alcohol product increased in accordance with a move from more unmodified catalysis to more modified catalysis. Alcohol yields of 77-85% were obtained at rates of 1.8-2.4 h(-1) for highly modified catalysis. Under highly modified conditions the linearity of the alcohol ranges in a narrow band from approximately 85-90% from Phoban-Ph to Phoban-Cy respectively. Hydrogenation of the alkene substrate varied from approximately 9-15% for Phoban-Ph and Phoban-Cy respectively the least and most electron donating derivatives. The two phosphine isomers were separated for Phoban-C(2) and the hydroformylation activity were re-evaluated for each isomer. The less electron donating [4.2.1] isomer required slightly higher ligand concentrations to achieve fully modified catalysis and gave rates and linearities comparable to the [3.3.1] isomer but giving slightly higher yields due to less hydrogenation of the olefin. In comparison, at fully modified conditions, PBu(3) gave a rate of 0.6 h(-1), alcohol yield of 77%, linearity of 81% and 17% hydrogenation. The crystal structures of the cobalt dimers [Co(CO)(3)(Phoban[3.3.1]-C(2))](2), [Co(CO)(3)(Phoban[3.3.1]-C(5))](2), [Co(CO)(3)(Phoban[3.3.1]-C(3)NMe(2))](2), and [Co(CO)(3)(Phoban[3.3.1]-Cy)](2) have been determined and indicated very similar geometries with Co-Co and Co-P bond distances ranging from 2.6526(10)-2.707(3) and 2.1963(8)-2.2074(9) A respectively. The cone angles of the Phoban ligands were calculated from the crystallographic data, according to the Tolman model, and ranges from 159-165 degrees.     

5-Hydroxy-1-phosphabicyclo[3.3.1]nonan

5-Hydroxy-1-phosphabicyclo[3.3.1]nonane A new approach to 1-phosphabicyclo[3.3.1]nonane compounds involves free-radical cyclization of 4-trimethylsilyloxy-4-phosphinomethyl-hepta-1.6-diene synthesized by the reaction of 2.2-diallyl-oxirane with KPH₂ followed by trimethylsilylation. Trimethylsilyl groups are easily cleaved in boiling methanol forming 5-hydroxy-1-phosphabicyclo[3.3.1]nonanes. Silylated and desilylated bicyclic compounds are characterized by n.m.r. and i.r. data.     

Reactions of C5H5M (M = Fe, Ni) with substituted thiophenes

The ion molecule reactions between C₅H₅M⁺ (M = Fe, Ni) with some substituted thiophenes have been studied in an ion trap mass spectrometer. The reactions of halogen substituted thiophenes lead to the formation of a new C-C bond between the cyclopentadiene ring and the thiophene with the loss of a neutral HX. The reaction mechanism has been investigated by means of DFT calculations and it was found that the insertion of the metal atom in the C-X bond is the key step in the process.     

Alkaline earth metal poly(hydrogen fluorides) hexafluoroarsenates(V) and hexafluorophosphate(V): M2(H2F3)(HF2)2(AF6) (M = Ca, A = As; M = Sr, A = As, P)

New compounds of the type M₂(H₂F₃)(HF₂)₂(AF₆) with M = Ca, A = As and M = Sr, A = As, P) were isolated. Ca₂(H₂F₃)(HF₂)₂(AsF₆) was prepared from Ca(AsF₆)₂ with repeated additions of neutral anhydrous hydrogen fluoride (aHF). It crystallizes in a space group P4₃22 with a = 714.67(10) pm, c = 1754.8(3) pm, V = 0.8963(2) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(AsF₆) was prepared at room temperature by dissolving SrF₂ in aHF acidified with AsF₅ in mole ratio SrF₂:AsF₅ = 2:1. It crystallizes in a space group P4₃22 with a = 746.00(12) pm, c = 1805.1(5) pm, V = 1.0046(4) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(PF₆) was prepared from Sr(XeF₂)_n(PF₆)₂ in neutral aHF. It crystallizes in a space group P4₁22 with a = 737.0(3) pm, c = 1793.7(14) pm, V = 0.9744(9) nm³ and Z = 4. The compounds M₂(H₂F₃)(HF₂)₂(AF₆) gradually lose HF at room temperature in a dynamic vacuum or during being powdered for recording IR spectra or X-ray powder ray diffraction patterns. All compounds are isotypical with coordination of nine fluorine atoms around a metal center forming a distorted Archimedian antiprism with one face capped. This is the first example of the compounds in which H₂F₃⁻ and HF₂⁻ anions simultaneously bridge metal centers forming close packed three-dimensional network of polymeric compounds with low solubility in aHF. The HF₂⁻ anions are asymmetric with usual F?F distances of 227.3-228.5 pm. Vibrational frequency (ν₁) of HF₂⁻ is close to that in NaHF₂. The anion H₂F₃⁻ exhibits unusually small F?F?F angle of 95.1°-97.6° most probably as a consequence of close packed structure.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Singlet-triplet energy separations in divalent five-membered cyclic conjugated C5H3X, C4H3SiX, C4H3GeX, C4H3SnX, and C4H3PbX (X = H, F, Cl, and Br)

Singlet-triplet energy gaps in cyclopenta-2,4-dienylidene, as well as its 2- or 3-halogenated derivatives, are compared and contrasted with their sila, germa, stana, and plumba analogues; at HF/6-31G* and B3LYP/ 6-311++G(3df, 2p) levels of theory. Energy gaps (ΔG_t-s), between triplet (t) and singlet (s) states, appear linearly proportional to: (i) the size of the group 14 divalent element (M = C, Si, Ge, Sn and Pb), (ii) the angle ∠C-M-C, and (iii) the ΔG_(LUMO-HOMO) of the singlet state involved. The magnitude of ΔG_t-s, for each 2- and/or 3-substituted species studied, increases with an order of: carbenes < silylenes < germylenes < stanylenes < plumbylenes. This order reverses for the barriers of the ring puckering. The puckering occurs with more ease for every singlet, compared to its corresponding triplet form.Regardless of the group 14 element (M) employed, every 3-halo-substituted species is more stable than the corresponding 2-halo-substituted isomer. For M = Pb, Sn and/or Ge; 3-halo-substituted species have higher ΔG_t-s than their corresponding 2-halo-substituted analogues. For M = Si, similar ΔG_t-s are found for 2- and 3-halogenated isomers. For M = C, 3-halo-substituted species have lower ΔG_t-s than their corresponding 2-halo-substituted analogues.Every cyclic singlet has a larger ∠C-M-C angle, than its corresponding cyclic triplet state, except for 3-halosilacyclopenta-2,4-dienylidenes where triplet has a larger ∠C-M-C angle than its corresponding singlet state.     

Isomerism in tetrahedral rhenium cluster complexes [Re4Q4(PMe2Ph)4X8]·nCH2Cl2 (Q = Se, X = Br; Q = Te, X = Cl, Br)

Three new tetrahedral rhenium cluster compounds [Re₄Se₄(PMe₂Ph)₄Br₈]·1.5CH₂Cl₂ (1), [Re₄Te₄(PMe₂Ph)₄Br₈]·CH₂Cl₂ (2), and [Re₄Te₄(PMe₂Ph)₄Cl₈]·CH₂Cl₂ (3) have been synthesized by the reaction of the corresponding precursor chalcohalide complexes [Re₄Q₄(TeX₂)₄X₈] (X = Br, Q = Se (for 1), Te (for 2); X = Cl, Q = Te (for 3)) with dimethylphenylphosphine in CH₂Cl₂. All compounds have been characterized by X-ray single-crystal diffraction and elemental analyses, IR and ³¹P NMR spectroscopy. ³¹P NMR spectroscopy indicates the formation of isomers in solution, confirmed by single-crystal X-ray analysis.     

Six-coordinate organotin(IV) complexes formed using the Kläui ligands; [CpCo{P(OR′)2O}3]SnR3 − nCln

The complexes [CpCo{P(OR′)₂O}₃]SnR_3 − nCl_n [R′ = Me, Et; R = Ph, Me] are readily prepared from the corresponding organotin chloride and the sodium salt of the Kläui ligands. The X-ray crystal structures of the full series are reported for R = Ph, n = 0-3, and these show that they are all six-coordinate, including the Ph₃Sn derivative which is the first example of a SnC₃O₃ coordination sphere. ¹H, ¹³C, ³¹P and ¹¹⁹Sn NMR spectra are reported, and interpreted in terms of significant second-order effects and fluxional processes.