The determination of selenium by atomic absorption spectrophotometry

The problems involved in the determination of selenium by atomic absorption spectrophotometry are discussed. A practical method is described for which the sensitivity is approximately 1 p.p.m. Such concentrations can be determined in organic samples, but with mineral samples the preliminary treatment renders the procedure unsuitable for concentrations lower than 50 p.p.m. in a sulphide ore.     

The determination of arsenic and selenium in coal by continuous flow hydride-generation atomic absorption spectrometry and atomic fluorescence spectrometry

Concentrated perchloric acid is used to digest coal for subsequent determination of arsenic and selenium by hydride-generation atomic absorption and fluorescence spectrometry. Arsenic and selenium are removed from potentially interfering metal ions by coprecipitation with lanthanum hydroxide. The detection limits, 58 and 36 ng g^?1 by atomic absorption and 25 and 10 ng g^?1 by atomic fluorescence, for arsenic and selenium in coal, respectively, are adequate for the normal levels of these metals.     

The determination of gallium by atomic absorption spectrometry

The use of a nitrous oxide-acetylene flame for the determination of gallium by atomic absorption spectrometry was compared with the use of air-acetylene flames. The nitrous oxide method provided higher sensitivity and was much less sensitive to acid and base composition and to diverse added salts. Significant matrix and background effects, which occurred when gallium was determined in ore solutions with the air-acetylene flame, were eliminated with the nitrous oxideacetylene flame.     

Simultaneous determination of manganese and selenium in serum by electrothermal atomic absorption spectrometry

A method for determination of manganese and selenium in serum by simultaneous atomic absorption spectrometry (SIMAAS) is proposed. The samples (30 mul) were diluted (1+3) to 1.0% v/v HNO(3)+0.10% w/v Triton X-100 directly in the autosampler cups. A total of 20 mug Pd+10 mug Mg(NO(3))(2) was used as chemical modifier. The pyrolysis and atomization temperatures for the simultaneous heating program were 1200 and 2300 degrees C, respectively. The addition of an oxidant mixture (15% w/w H(2)O(2)+1.0% v/v HNO(3)) and the inclusion of a low temperature pyrolysis step (400 degrees C) attenuated the build-up of carbonaceous residues onto the integrated platform. An aliquot of 15 mul of the reference or sample solution was introduced into the graphite tube and heated at 80 degrees C; subsequently, 10 mul of oxidant mixture+10 mul of chemical modifier was introduced over that aliquot and the remaining heating program steps were executed. This strategy allowed at least 250 heating cycles for each THGA tube without analytical signal deterioration. The characteristic masses for manganese (6 pg) and selenium (46 pg) were estimated from the analytical curves. The detection limits were 6.5 pg (n=20, 3delta) for manganese and 50 pg (n=20, 3delta) for selenium. The reliability of the entire procedure was checked with the analysis of serum from Seronormtrade mark Trace Elements in Serum (Sero AS) and by addition and recovery tests (97+/-9% for manganese and 96+/-7% for selenium) using five serum samples.     

The determination of selenium in biological material by thermal neutron activation analysis and atomic absorption spectrometry

Neutron activation analysis and atomic absorption spectrometry (graphite furnace) methods for the analysis of selenium in human tissue are described. The sensitivity (10–30 ng/sample), accuracy and precision are of the same order for both techniques and the choice can only be made on grounds of urgency or convenience. AAS should be chosen for the analysis of wet tissue or the urgent analysis of small numbers of dry tissue. NAA should be chosen for the analysis of large numbers of dry tissue samples where time is not important. The selenium concentration of human liver is shown to be in the region of 1 to 2 ppm (dry weight). Selenium may be lost from tissue during freeze drying if the samples are not maintained at −35°C.     

Direct determination of selenium in a wild fruit juice by electrothermal atomic absorption spectrometry

A matrix modifier composed of platinum and nickel is proposed for the determination of selenium in a wild fruit juice made from Lantingguo (Vuccinium uliginosam). Five matrix modifiers (copper/nickel, palladium/magnesium, platinum/magnesium, platinum/nickel and platinum/copper) for suppressing the interference effects of seven co-existing elements (potassium, phosphorus, calcium, magnesium, manganese, zinc and iron) in a wild juice were studied and a matrix modifier composed fro;m 10 mug of platinum and 200 mug of nickel was found to give the best performance. Selenium in three juices was determined by electrothermal atomic absorption spectrometry employing the proposed matrix modifier without matrix preseparation. The relative standard deviation was 14% for 0.20 mg l(-1) of selenium. The recoveries were 95-110%. A characteristic mass was 28 pg.     

Determination of selenium in water by electrothermal atomic absorption spectrometry

Summary The electrothermal atomization of selenium has been investigated for the accurate determination of selenium in water samples. Hydrogen seriously affects the atomization temperature of selenium in a molybdenum micro-tube atomizer. The atomization of selenium also suffers from serious interferences caused by salts and other elements. The extraction of selenium diethyldithiocarbamate complex serves to eliminate the interferences from the matrix. The addition of copper allows the suppression of interferences from elements extracted with selenium. The method permits the determination of selenium(IV) and selenium(VI) separately.This research was in part funded by the Ministry of Education, Science and Culture, Japan, under Grant-in-Aid for Scientific Research, for which we express our appreciation.     

The determination of sulphate in fertilizers by atomic absorption spectrometry

Methods are described for the determination of sulphate in superphosphate fertilizers. Barium sulphate precipitated from an acidified EDTA solution is filtered onto a membrane filter and redissolved in ammoniacal EDTA, and the barium equivalent to the sulphate is determined by atomic absorption spectrometry. Alternatively, after precipitation of calcium as oxalate during sample solution preparation, and by following a similar sulphate precipitation technique, excess of barium is determined in the filtrate. No interferences were encountered when a nitrous oxide—acetylene flame was used with a potassium ionization buffer.     

Determination of selenium in human tissues by atomic absorption spectrometry

A simple method is described for the determination of selenium in human tissues without the use of perchloric acid. Digestion with nitric and sulphuric acids is followed by hydride generation and atomic absorption spectrometry. Results for NBS bovine liver and IAEA horse kidney reference materials were in good agreement with assigned concentrations, as was also achieved with the perchloric acid digestion. Recovery of added selenium was >90%, and the relative standard deviation was 5.5% for within-batch and 6.9% for between-batch analyses. The values of selenium in heart tissue were 0.9–1.3 μg g^?1 dry weight.     

The determination of manganese in urine by atomic absorption spectrometry

Urine samples were digested with a mixture of nitric, sulfuric, and perchloric acids containing molybdate as catalyst. A two-point standard addition technique involved extracts of buffered, digested aliquots containing 10- and 20-p.p.b. manganese(II) in the aqueous phase. The extraction system was MIBK-cupferron. Of the substances tested only bismuth, antimony, and thallium interfered. From the same subject, five morning urine samples averaged 3.0 p.p.b. of manganese with a range of 2.0–4.2 p.p.b.; the average deviation was 0.6 p.p.b.     

The determination of lead in petrol by atomic absorption spectrometry

The lead compounds are extracted into aqueous iodine monochloride, converted to lead nitrate by digestion with nitric acid, and determined by atomic absorption spectrometry against aqueous lead nitrate standards. The procedure is accurate, precise and rapid.     

The determination of tin by carbon filament atomic absorption spectrometry

The atomic absorption characteristics of tin on a carbon filament atom reservoir are described. The behaviour of tin in aqueous solution astin(II) chloride, in xylene as tin octoate and in oil solutions is studied. The interferenceeffects of a selected range of seven cations, added as chlorides in aqueous solution or as naphthenates in non-aqueous media, and of sulphate and phosphate were examined. In all cases, the signals were measured in the filament reservoir with a surrounding hydrogen diffusion flame. The 1% absorption sensitivity in the organic media at the 286.3-nm line was 10^-10 g and 9·10^-11 g in aqueous solution. In the latter medium, the corresponding sensitivity at 224.6 nm was 6.7·10^-11 g. The linear analytical range lay in the region 0 to 20 ng.     

The indirect determination of organic compounds by atomic absorption spectrometry

The feasibility of determining indirectly certain organic compounds by precipitation of insoluble silver compounds and determining the excess silver(I) by atomic absorption spectrometry (AAS) has been demonstrated. The determination of other compounds, such as alkylated barbiturates and mercaptans by similar methodology should be possible. Although direct AAS methods are preferable to indirect methods, the insolubility of many silver salts, the inherent sensitivity of the AAS method for silver, and the speed and convenience of AAS methodology suggests that under certain conditions, an indirect AAS method may be appropriate and the method of choice.     

Indirect determination of perchlorate by atomic absorption spectrometry

A liquid-liquid extraction and determination of perchlorate by atomic absorption spectrometry is described. The method involves extraction of perchlorate with the Schiffs base complex [Co(BPTC)₂]⁺, where BPTC = 2-benzoyl pyridine thiosemicarbazone, in methyl isobutyl ketone in acidic medium and subsequent analysis of cobalt in flame AAS, hence indirectly for perchlorate. The extraction efficiency is 98%. The calibration graph was found to be linear for 1.0–11.4 g ClO ₄ ^– per ml of solvent, and the limit of detection is 30 ng ml^–1. The present method is free from interference of large number of foreign ions. The method has been applied for determination of perchlorate in human blood serum samples spiked with perchlorate, urine and commercial potassium chlorate sample.     

Indirect determination of vanadium by atomic absorption spectrometry

An indirect method for the determination of vanadium as vanadate by atomic absorption spectrometry is described. In neutral medium, vanadate forms a stable ion-association complex with copper (II) and biguanide, which is extractable into butanol with an efficiency higher than 99%. The copper content in the extract (and hence indirectly VO^?₃) is determined by aspirating it directly into an acetylene flame. The calibration graph is linear up to 3.4 μg ml^?1 of VO^?₃. The limit of detection is 16 ng ml^?1. Only chromium interferes.     

Indirect determination of pilocarpine by atomic absorption spectrometry

Atomic absorption spectroscopic (AAS) method for microdetermination of pilocarpine alkaloid has been developed. The procedure is based upon the measurement of mercuric content of pilocarpine complex. The experimental conditions as well as the molar ratio were thoroughly studied. The percentage recovery of pilocarpine was found to be (99.15 ± 0.79). The proposed method was applied on pharmaceutical formulations and the results were satisfactory and in good agreement with that given by the official one.     

石墨炉原子吸收光谱法测定大鼠血清中硒

通过考察不同基体改进剂效果,提出了以硝酸锶和硝酸钯做为混合基体改进剂。建立了用石墨炉原子吸收法测定牛血清和大鼠血清中痕量硒的分析方法。线性范围为0-120ng/mL,硒的检出限为0．095ng／mL,方法用于标准牛血清测定。结果与标准值基本吻合,大鼠血清测定标准加入回收率为102％。     

Direct determination of selenium in sub-milligram amounts of human sperm nuclei by electrothermal atomic absorption spectrometry

In the sperm nuclei selenium is present only in form of a single selenoenzyme, the sperm nuclei glutathione peroxidase (snGPx), involved in processes to secure the structural stability of the nuclear chromatin. As changes in its expression may affect sperm function, its analysis is of interest in the diagnosis of male infertility. A method has been developed which by removal of the other selenium compounds present in other sperm components and measurement of the concentration of selenium in the purified human sperm nuclei by electrothermal atomic absorption spectrometry (ETAAS) allows the quantitative analysis of this enzyme. As the purification resulted in yields in the range of only 150 μg nuclei/ml semen and the amount of purified nuclei in the sample could only be determined by weighing, the main analytical difficulty arose from the accurate determination of the sample masses. The procedure includes preparation of purified sperm nuclei, measurement of the sample mass and direct selenium analysis in the suspensions of the compact sperm nuclei without prior digestion of the matter, using a palladium matrix modifier, a spectrometer with Zeeman background correction and a graphite atomizer with L'vov platform. The detection limit for the determination of selenium was 8.4 pg. The quality control of the results by means of instrumental neutron activation analysis (INAA) showed the reliability of the selenium determination by ETAAS. The procedure proved to be suitable to analyze selenium and thus snGPx in very small amounts of purified human sperm nuclei.     

Reduction of effects of structured non-specific absorption in the determination of arsenic and selenium by electrothermal atomic absorption spectrometry

The presence of iron and phosphates in biological matrices causes deuterium arc background-correction systems to overcompensate at several arsenic and selenium resonance lines. The addition of platinum as matrix modifier has a significant effect on both the absorbance/time profile of iron and the formation of gaseous phosphate decomposition products. A nickel/platinum matrix modifier is shown effectively to control the problems in the determination of selenium arising both from thermal instability and spectral interferences. The same combination eliminates the spectral interferences found at the arsenic resonance lines. Remaining problems are the thermal stabilization of organometallic arsenic compounds present in biological samples. When radioactived-labelled ⁷⁴As compounds prepared in vivo were applied, none of the tested matrix modifiers (Ni, Cu, Ag, Pd, Zr, Ce, Ce + magnesium nitrate) showed a significant influence on the volatility of arsenic in whole blood and urine from rats.