Extraction of copper(II) and nickel(II) by nopinoquinone dioxime

In the research for a selective extractant for nickel a strained dioxime, β-nopinoquinone dioxime, has been studied in its extraction properties for copper(II) and nickel(II). Spectroscopic investigations (ESR and NMR) showed that both copper and nickel are extracted as a N,N-coordinated chelate. The extraction studies showed that the use of strained instead of aliphatic dioximes makes the extraction more convenient because of the higher extraction rate, but the selectivity for nickel above copper disappears.δ-nopinoquinone dioxime is easily converted into its furazan by treatment with 1N NaOH. This furazan is a rather weak ligand without significant extraction capacities.     

Liquid–liquid extraction of Cu(II), Co(II) and Ni(II) with salicylidèneaniline from sulphate media

For a fundamental study on the development of novel extraction divalent metal, the extraction behaviour of copper(II), cobalt(II) and nickel(II) is studied with salicylidèneaniline (SAN). The phenol group in the Schiff base moiety leads to a large increase in the percentage of transition metal ions. SAN has both good reactivity towards metal ions and solubility in organic solvents. The solvent extraction of copper(II), cobalt(II) and nickel(II) with salicylidèneaniline from sulphate media is studied with the following parameters: pH, concentration of the extractant and the nature of diluent. The stoichiometry coefficients of the extracted species are determined by the slope analysis method. The extraction reaction proceeds by cation exchange mechanism and the extracted species are: CuL₂HL, CoL₂HL and NiL₂. The extaction constants are evaluated for the different diluents. Under suitable conditions of pH, the solvent extraction of cobalt(II) and nickel(II) in different diluents leads to third phase formation. This tendency is confirmed from numerical extraction constants for both metal cations (log?K _ex?=??15.10?±?0.03 for nickel(II) in CHCl₃) and (log?K _ex?=??12.56?±?0.04 for cobalt(II) in CHCl₃). The extraction efficiency is found to follow the order Cu(II)?>?Co(II)?>?Ni(II).     

Selective separation of copper with Lix 864 in a hollow fiber module

The transfer and separation of Cu(II), Co(II), Ni(II) and Zn(II) ions across a hollow fiber supported liquid membrane containing LIX 864 as the mobile carrier dissolved in kerosene solvent has been investigated. The flux and selectivity for copper has been studied as a function of the feed flow, the carrier concentration in the liquid membrane and the extraction solution acidity. A maximum copper recovery at 30% of LIX (v/v) in the diluent was obtained. The permeation experiments showed that at pH 2 in the extraction solution a highly selective separation of Cu over the other cations can be achieved. Increasing the acidity of the extraction solution copper selectivity decrease and the grade of recuperation sequence is Cu>Co>Ni>Zn. These results suggest that in selected situations, this membrane system can be competitive with the conventional liquid-liquid extraction process, in particular in leaching solutions with low metal concentration.     

Metal complexes and solvent extraction properties of isonitrosoacetophenone 2-aminobenzoylhydrazone

Three types of copper complexes as well as an oximate-bridged nickel complex with isonitrosoacetophenone 2-aminobenzoylhydrazone (H(2)L) have been prepared in ethanolic solution and characterized by elemental analyses, IR, (1)H NMR, UV-vis and magnetic susceptibility measurement. IR spectra show the ligand coordinates as a neutral, monoanionic and dianionic O,N,N-tridentate acylhydrazoneoxime ligand depending reaction conditions and metal salts employed. The elemental analyses results, spectroscopic and magnetic data are consistent with the formation of mononuclear copper complexes and binuclear complexes with both copper and nickel. The effects of varying pH and solvent on the absorption behavior of both ligand and complexes have been investigated. The extraction ability of acylhydrazoneoxime ligand has been examined by the liquid-liquid extraction of selected transition metal [Cu(2+), Ni(2+), Co(2+), Cr(3+), Hg(2+), Zn(2+), Cd(2+) and Mn(2+)] cations. The ligand shows strong binding ability toward copper(II) ion.     

Macrocyclic ligand design. Structure-function relationships involving the interaction of pyridinyl-containing, oxygen-nitrogen donor macrocycles with selected transition and post transition metal ions on progressive N-benzylation of their secondary amines

Structure-function relationships underlying the interaction of progressively N-benzylated N(4)O(2)-donor macrocycles with cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II), silver(I) and lead(II) have been probed using a range of techniques that include X-ray diffraction, DFT computations, solvent extraction, potentiometric stability constant determinations and competitive membrane transport experiments. Collectively, the results indicate that N-benzylation of the secondary amine donor groups of the parent macrocyclic ring results in an enhanced tendency towards selectivity for silver(I) relative to the other six metals investigated. The observed behaviour serves as additional exemplification of the previously proposed concept of selective 'detuning' as a mechanism for metal ion discrimination.     

The simultaneous determination of copper and nickel by solvent extraction and gas-liquid chromatography with bis (acetylpivalylmethane) ethylenediimine as reagent

The copper(II), nickel(II) and palladium(II) chelates of the bridged β-ketoamine, bis(acetylpivalylmethane) ethylenediimine, are described. The copper and nickel complexes are readily extracted by cyclohexane at pH 8.0 from aqueous solution. The gas chromatographic separation of the copper and palladium, the nickel and palladium, and the copper and nickel chelates is reported on a silicone gum rubber phase (E-350) supported on Universal B at 285°C. Optimal conditions for the complete separation of copper and nickel are reported; the solvent extraction—gas chromatographic procedures are applied to the determination of the individual metal ions (limit of detection, 1 ng) and to the simultaneous determination of copper and nickel in solution and in alloy samples. A rapid method for the determination of copper in domestic water samples is also described.     

Acetylacetonate bis(thiosemicarbazone) complexes of copper and nickel: towards new copper radiopharmaceuticals

A series of copper(II) and nickel(II) 1,3-bis(thiosemicarbazonato) complexes have been synthesised by the reaction of the metal acetates with pyrazoline proligands. In each case the complexes have an overall neutral charge with a dianionic ligand. The copper 1,3-bis(4-methyl-3-thiosemicarbazonato complex has been characterised by X-ray crystallography, which shows the copper is in an essentially square-planar symmetric N(2)S(2) environment. The nickel 1,3-bis(4-methyl-3-thiosemicarbazonato) and nickel 1,3-bis(4-phenyl-3-thiosemicarbazonato) complexes have been characterised by X-ray crystallography and show that in these cases the nickel is in a distorted square-planar environment, but the bonding mode of the ligands is unusual; the nickel binds to one of the aza-methinic nitrogen atoms and one hydrazinic nitrogen, creating one five-membered N-N-C-S-Ni chelate ring and one four-membered N-C-S-Ni chelate ring. Interestingly, the X-ray structure of the ethyl analogue [1,3-bis(4-ethyl-3-thiosemicarbazonato)nickel(II)] shows that in this case the nickel is symmetrically coordinated in the usual manner. The nickel complexes are diamagnetic and the different coordination modes are confirmed in solution by NMR spectroscopy. The complexes are susceptible to oxidation in air and a nickel complex, in which the central methylene carbon has been oxidised, has been characterised by X-ray crystallography and NMR spectroscopy. Electrochemical measurements show that the copper complexes undergo a reversible one-electron reduction at biologically accessible potentials.     

Membrane-based solvent extraction for selective removal and recovery of metals

A membrane-based solvent extraction process was developed for selective removal and recovery of metals from aqueous solutions. The process utilizes microporous membranes as an interface between an aqueous solution and organic solvents containing liquid ion exchangers. Metal ions are transported from the aqueous solution to the organic phase at the interface created in the pores of membrane. The organic solvent, which is loaded with metal ions in the extraction module, is regenerated in contact with the stripping solution in the stripping module. One important feature of this process is the stability of the membrane system, which results from using an aqueous—organic separator to remove aqueous solution from the organic circulating line. This process was evaluated for enrichment of copper using solvents containing LIX 64N. The process is applicable to selective recovery of metals from ore leachates or metal-containing wastewater.     

Positron lifetime diagnostics of β-diketonates of bivalent metals

Positron lifetime diagnostics was used to study manganese(II), cobalt(II), nickel(II), copper(II), and zinc(II) acetylacetonates, γ-chloro and γ-bromo chelate complexes of cobalt and nickel, and similar halo and nitro chelate complexes of copper. The dependences of the annihilation lifetime τ₂ on the metal nature and the stability constant of the metal chelate ring were established. The annihilation lifetime and intensity were found to depend not only on the electronic effect of the γ-substituent in the chelate ring but also on the structure of the complex. A comparison of the dependences of the frequencies of the C-O and M-O stretching vibrations on τ₂ revealed that a positron interacts simultaneously with the γ-carbon atoms and the O atoms of the chelate ring, whose accessibilities are determined by the structures of bis(chelates). The plots of the ionization potentials of the n-orbitals of the bis(chelates) vs. τ₂ were similar to the plots of the quenching rate constant of the benzophenone triplet vs. τ₂ in the presence of the bis(chelates).     

The reaction between palladium(II) and complexes of 8-quinolinol-5-sulfonic acid

Anomalous results for the reaction between palladium(II) and fluorescent complexes of 8-quinolinol-5-sulfonic acid were found to be due to a slow reaction. Heating the solution permits the determination of palladium(II) in combination with copper(II) or nickel(II), the two cations being titrated stepwise The approximate value for the overall formation constant of the PdL₂^2- complex was determined.     

Nickel(II) and copper(II) complexes based on N-(2-carboxyethyl)alkanolamines: Influence of the amino alcohol structure on the coordination sphere of the metal center

New nickel(II) complexes based on N-(3-hydroxypropyl)-β-alanine, N-(bis(hydroxymethyl)methyl)-β-alanine, and N-(tris(hydroxymethyl)methyl)-β-alanine are synthesized, and their structures are studied by X-ray diffraction analysis. The coordination spheres of the nickel and copper metal centers in the condensed phase are compared for a series of N-substituted β-alaninate ligands with the regularly changed dentate mode. In the case of the copper(II) complexes, an increase in the size of the alkanolamine chelate ring or the number of hydroxymethyl groups provides the formation of achiral coordination structures, whereas the structures of the nickel(II) complexes are independent of the size of the alkanolamine chelate ring or the number of hydroxymethyl groups, thus providing the formation of the complexes as racemic modifications.     

Metal exchange kinetics: uncatalyzed replacement of Ni(II) from tetramethylenediaminetetraacetatonickel(II) complex by Cu(II)

The kinetics of metal exchange between copper(II) and tetramethylenediaminetetraacetatonickel(II), [Ni(TMDTA)] has been studied between pH 3.4 and 4.8 at an ionic strength of 1.25 M (NaClO₄) and a temperature of 25.0 ± 0.1 °C. The reaction is first order in [Ni(TMDTA)]. The reaction order in [Cu²⁺] varies from first to zero and then back to first as [Cu²⁺] is increased. At low copper concentration, the first-order rate constant is pH independent and represents the attack of copper on the nickel complex through a pathway in which TMDTA is partially uncoordinated before reaction with copper. Evidence is presented for a stepwise dechelation mechanism followed by attack of copper to give a dinuclear intermediate. The zero-order rate is pH dependent. At higher [Cu²⁺], the swing back to first order is due to the formation of a weak copper-tetramethylenediaminetetraacetatonickelate complex which then converts to products through a dinuclear intermediate. A plausible mechanism, consistent with all the kinetic data, is presented.     

Crystal structures of triazine-3-thione derivatives by reaction with copper and cobalt salts

The reaction of 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]triazine-3-thione L1H2OCH3 with copper(II) chloride leads to the formation of an organic molecule L2 containing two triazine rings linked by a new S-S bond. A binuclear copper(II) complex, 1, containing L1 is also isolated. The reaction of L1H2OCH3 with copper(I) chloride yields a hexanuclear cluster of copper(I), 2, in which the copper atoms form a distorted octahedron with the ligand L1 acting as an NS chelate and sulfur bridge, giving to the copper ion a trigonal geometry by one N and two S atoms. In any reaction of the disulfide L2 with metal salts, complexes containing this molecule are isolated. Reactions with copper(I) and copper(II) chloride and nickel(II) and cadmium(II) nitrate produce the S-S bond cleavage, giving complexes containing the triazine L1 behaving as the NS anion, which show spectroscopic characteristics identical with those formed by reaction with L1H2OCH3. However, the reaction with cobalt(II) nitrate gives a low-spin octahedral cobalt(III) complex, in which an asymmetric rupture of the disulfide L2 has been produced, giving an unexpected complex with a new ligand and keeping the S-S bond.     

Spectrophotometric Study on the Extraction of 4-(2- Thiazolylazo)Resorcinol Chelates of Cobalt(II), Nickel(II), Copper(II), and Zinc(II) with Zephiramin

Abstract

The solvent extraction of the transition metals(II)4-(2-thia-zolylazo)resorcinol(TAR) chelate anions with cation of zephiramin (Z⁺ Cl^?) was spectrophotometrically investigated. The composition of the extracted species was estimated to be 2Z⁺ MR₂ ^2-, which had the absorption maxima in the same ranges of wavelength at about 550 nm, and the constant extractions were obtained at pH 6.7–10.2 for cobalt, 7.2–9.1 for nickel, 8.2–10.1 for zinc, and 8.5–10.7 for copper system. In the presence of sodium chloride, cobalt chelate could be effectively separated from the other transition metals. The extraction equilibrium was also investigated and the extraction constants were calculated.     

Application of the zone melting technique to metal chelate systems-IV Concentration of metal-8-hydroxyquinoline chelates in 8-hydroxyquinoline

The zone melting technique has been applied to 8-hydroxyquinoline containing trace amounts of various metal 8-hydroxyquinolates such as the nickel(II), cobalt(II), zinc(II) and copper(II) chelates. The metal chelate in each system was concentrated in the direction of zone travel. The highest concentrating effect was observed in the copper(II) chelate system. The concentration ratio, defined as the fraction of the metal chelate concentrated in the bottom 15% of the column, was determined after the 30th passage. A trace amount of copper ion extracted with a large excess of 8-hydroxyquinoline, was concentrated by means of the zone melting technique. The concentration ratio was 96%.     

Hydrolytic ring opening reactions of anhydrides for first row transition metal dicarboxylate complexes

Ring opening reactions of 2,3-pyridine dicarboxylic anhydride are studied with hydrated salts of cobalt, nickel and zinc. The hydrated metal salts preferentially hydrolyze 2,3-pyridine dicarboxylic anhydride rather than causing esterification in methanol medium. Hydrolytic opening of 2,3-pyridine dicarboxylic anhydride by hydrated cobalt(II) acetate and nickel(II) acetate resulted in the corresponding chelate complexes of monodeprotonated 2,3-pyridine dicarboxylic acid. The reaction of copper acetate with pyromellitic dianhydride in the presence of 1,10-phenanthroline gives a dinuclear copper complex whereas a similar reaction with copper(II) chloride gives a mononuclear copper complex.     

Copper(II), nickel(II), and zinc(II) complexes with <Emphasis Type="Italic">o</Emphasis>-tozylaminobenzaldehyde 4,6-dimethylpyrimidyl hydrazone

o-Tosylaminobenzaldehyde dimethylpyrimidyl hydrazone and its copper(II), nickel(II), and zinc(II) complexesare synthesized and studied. According to the X-ray diffraction data, the zinc(II) complex has the structure of a tetragonal pyramid with the N₃O donor ligand environment. According to EPR and magnetochemistry data, the copper(II) complex has a similar structure of the chelate core. In the nickel(II) complex, the solvent molecule completes the coordination core to an octahedron.     

The nonaqueous potentiometric determination of commercial benzophenone oxime (LIX) extractants

A nonaqueous potentiometric method for the determination of substituted benzophenone oxime reagents (LIX) used as extradants in copper extraction processes is described. t-Butanol is used as the solvent and tetrabutylammonium hydroxide as the titrant. Endpoints are detected with a glass-modified calomel electrode system; a slow rate of titrant delivery is used near the inflection point. The syn and anti isomers of LIX reagents (substituted o-hydroxybenzophenone oximes) can be differentiated.     

Sulfonamide mit heterocyclischen Substituenten als Extraktionsmittel für Kupfer(II)

Sulfonamides with Heterocyclic Substituents as Extractants for Copper(II) With 2-picolylbenzenesulfonamide (N2NHO₂SC₆H₅) as a model of the technical extractant LIX 34, the influence of functional variations on the extraction of copper(II) is studied and estimated by a comparison of the pH_1/2 values. The relation pH_1/2～–σ_p is observed for extractants with substituents in p-position of the benzene ring. Turning to 2-pyridylethylbenzenesulfonamide, which forms six-membered rings, an increase of pH_1/2 is observed. But no direct comparison is possible with 2-pyridylbenzenesulfonamide as the copper(II) complexes are dimeric having a structure analogous to copper(II) acetate. The substitution of the methylene group by an SO₂–(PSA? H) or an NH-residue (PTSH? H) is connected with an with an increase of pH_1/2 in the first case, but a decrease of pH_1/2 in the second one (7,2₅ and 2,7₀). The application of PTSH? H as an extractant for copper(II) is confined by a slow redox reaction with this ion. π-electron delocalization within the chelate rings, which are derived from sulfonylhydrazones of heterocyclic ketones, is a factor which, in general, improves the extraction properties. There is a strong differentiation of PH_1/2 (APSH? H 1,4; BBSH? H 6,9). An increase of the tetrahedral distortion of the chromophore CuN₄, as it is indicated by ESR, measurements, is connected with a decrease of pH_1/2. The benzenesulfonyl group influences the copper(II) extraction by bidentate nitrogen containing ligands in a twofold may: The protonation of the pyridyl and also that of other heterocyclic residues is rendered more difficult, but NH-acidity is increased. Some of the new extractants (APSH? H, BPSH? H) are as active as LIX reagents.     

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.