Theoretical and experimental studies of ion imprinted polymer for nitrate detection

Molecular imprinting is an approach to synthesize receptors with specific molecular recognition properties. A computational method was carried out to study interaction between template and monomer in prepolymerization mixture. The functional monomer and template complexes were optimized, at the minimum energy confirmation using Austin Model 1 semi empirical method within Restricted Hartree Fock formalism. The theoretical results showed that allylthiourea (functional monomer) has the largest interaction energy towards template (sodium nitrate) with the mole ratio of 4 : 1; functional monomer : template. The resulting polymers were characterized using Fourier Transform infrared spectroscopy, thermogravimetry analysis and field emission scanning electron microscopy. Rebinding experiments were carried out to evaluate binding capacity of the polymer. The adsorption data of ion imprinted polymer (IIP) were fitted with Langmuir-Freundlich isotherm model. Pseudo-second order kinetic model was used to describe the kinetic adsorption behavior of IIP. The experimental binding result showed good agreement with theoretical computation and the IIP was further used for nitrate ion detection. The results of membrane optimization indicated that the sensor, which composed of 30% polyvinylchloride, 60% nitrophenyl octyl ether as a plasticizer, 2% sodium tetraphenyl borate, and 10% IIP as ionophore exhibited an almost Nernstian slope with the limit of detection 3.9 × 10^-6 M. The fabricated sensor had shown good potential in nitrate detection with wide linear range, low limit of detection and found to have good selectivity towards nitrate ion over other anion.     

Atomic-absorption spectrometric determination of calcium, magnesium and potassium in leaf samples after decomposition with molten sodium hydroxide

The decomposition of standard leaf samples of varied origin and nature by fusion with sodium hydroxide in an open system has been studied. The use of sodium nitrate as an auxiliary agent facilitated the mineralization of most of the samples. The solutions obtained were analysed for calcium, magnesium and potassium by flame atomic-absorption spectrometry. The method is fast and quite precise, with absolute standard deviations of 0.04-0.13, 0.002-0.03 and 0.04-0.12% for calcium, magnesium and potassium contents of O.8-5.0, 0.13-0.48 and 0.36-2.2% respectively. The limits of detection (mug/ml) in the determination step were 0.10 for calcium, 0.011 for magnesium, and 0.09 for potassium.     

A renewable copper electrode as an amperometric flow detector for nitrate determination in mineral water and soft drink samples

A novel approach was developed for nitrate analysis in a FIA configuration with amperometric detection (E = −0.48 V). Sensitive and reproducible current measurements were achieved by using a copper electrode activated with a controlled potential protocol. The response of the FIA amperometric method was linear over the range from 0.1 to 2.5 mmol L⁻¹ nitrate with a detection limit of 4.2 μmol L⁻¹ (S/N = 3). The repeatability of measurements was determined as 4.7% (n = 9) at the best conditions (flow rate: 3.0 mL min⁻¹, sample volume: 150 μL and nitrate concentration: 0.5 mmol L⁻¹) with a sampling rate of 60 samples h⁻¹. The method was employed for the determination of nitrate in mineral water and soft drink samples and the results were in agreement with those obtained by using a recommended procedure. Studies towards a selective monitoring of nitrite were also performed in samples containing nitrate by carrying out measurements at a less negative potential (−0.20 V).     

Indirect fluorometric detection in micro high-performance liquid chromatography

Summary Indirect fluorometric detection of non-electrolytes and inorganic anions were examined by using a commercially available fluorometer. The dynamic reserve achieved by the present system was (1.0–1.4)×10³, and it was about one-tenth of the value achieved by UV detection. The mass detection limit of 0.2 pmol was achieved for nitrate by using 3×10^–5 M sodium salicylate as the mobile phase. In the case of ion chromatography the mass detection limit was improved by using a low concentration mobile phase.     

Sodium Ion-Selective Chalcogenide Glass Electrodes

Abstract

Analytical characteristics and sensing mechanism of sodium ion-selective electrodes based on NaCl-Ga₂S₃-GeS₂ glasses have been investigated. Chalcogenide glass electrodes containing 10 mol.% NaCl in the membrane showed near-Nernstian response in the concentration range from 10-³ to 1 M sodium nitrate solution. These sensors were superior to the conventional pNa oxide glass electrodes in selectivity in the presence of hydrogen ions and in Na⁺ ion sensitivity in fluoride media. Prolonged solution treatment for several days reduces, however, the detection limit of the sensors and the slope of the electrode response. Ionic processes at the membrane surface have been investigated using XPS technique and ²²Na tracer measurements. It was shown that sodium ion-exchange governed Na⁺ ion response of chalcogenide     

Ionic strength dependence of formation constants, complexation of nitrilotriacetic acid with tungsten(VI) ion

The dependence on ionic strength of protonation of nitrilotriacetic acid and its complexation with W(VI) is reported in sodium perchlorate, sodium nitrate and sodium chloride solutions as background salts. The measurements have been performed at 25°C and various ionic strengths in the range 0.1–1.0 mol dm⁻³, using a combination of potentiometric and spectrophotometric techniques. The overall analysis of the present and the previous data dealing with the determination of stability constants at different ionic strengths allowed us to obtain a general equation, by which a formation constant determined at a fixed ionic strength can be calculated, with a good approximation, at another ionic strength, if 0.1 ≤ ionic strength ≤ 1.0 mol dm⁻³ sodium perchlorate, sodium nitrate or sodium chloride.     

Potentiometric studies on organic compounds containing sulphur with a sulphide ion-selective membrane electrode

Phenylthiourea and N,N-diphenylthiourea can be determined in the concentration range 10¹–10^?3M by potentiometric titration with silver nitrate solution with a sulphide ion-selective membrane electrode. The influence of the alkali and acid concentration on the course of the reactions with the silver nitrate titrant was studied. When phenylthiourea is titrated in the presence of 0.1 M sodium hydroxide, silver sulphide is precipitated, and the phenylcyanamide formed simultaneously reacts further with silver nitrate to form a silver phenylcyanamide precipitate. When N,N-diphenylthiourea is titrated under similar conditions, silver sulphide is again formed, but no cyanamide-type compound can be formed owing to the presence of the second phenyl group. In 1 M sodium hydroxide both compounds studied react with two equivalents of silver to give silver sulphide and phenylurea or diphenylurea, respectively. In the presence of nitric acid both compounds react similarly with silver nitrate. Two molecules of the compounds react with one molecule of silver nitrate to give a white precipitate.     

Nitrate ion-selective sensor based on electrochemically prepared conducting polypyrrole films

Nitrate-doped polypyrrole (PPy) films on a glassy carbon substrate have been prepared electrochemically in aqueous, acetonitrile, and propylene carbonate solutions for use as nitrate sensors. Lithium nitrate, sodium nitrate, nitric acid, tetraethylammonium p-toluene sulfonate (TS), and tetradodecylammonium nitrate (TDN) were employed as electrolytes. The effect of dibutylphthalate (DBP) as a plasticizer on the sensitivity and lifetime of PPy film sensors was also investigated. A Nernstian behavior with a slope of 56.9 m V/decade over 0.1–7.4 × 10⁻⁵ M NO and a detection limit of 4.7 × 10⁻⁵ M were observed for the polymer sensor prepared in acetonitrile solution containing lithium nitrate and 15% plasticizer (DBP). A lifetime of more than 6 months for this PPy film electrode was obtained.     

Spectrophotometric Study of Isoniazid by Using 1,2‐Naphthoquinone‐4‐Sulfonic Acid Sodium as the Chemical Derivative Chromogenic Reagent

A new method for the determination of isoniazid by using 1,2‐naphthoquinone‐4‐sulfonic sodium as the chemical derivative chromogenic reagent is established. The method is based on a condensation reaction to measure the pink compound produced by the reaction of isoniazid with 1,2‐naphthoquinone‐4‐sulfonic sodium in pH 13.00 buffer solution. The stoichiometric ratio of the compound is 1:1, and its maximum absorption wavelength is at 460 nm, ? = 1.18 × 10⁴ L·mol^?1 cm^?1. Beer's law is perfectly obeyed in the range of 0.50?30 μg.mL^?1 of isoniazid. The linear regression equation is A = 0.0185 + 0.11056C (mol.L^?1), with 0.9994 of a linear regression correlation. The detection limit is 0.40 μg.mL^?1, RSD is 0.48%, and average recovery is over 99.3%. This paper further optimizes the determination of isoniazid compared to the previous methods, and the kinetic property and reaction mechanism are studied intensively. This proposed method has been successfully applied to the determination of isoniazid in tablets of isoniazid with satisfactory results.     

Development of a simple and effective silver staining protocol for detection of DNA fragments

Silver staining is one of the widely used methods for DNA fragment detection in biological research. Silver staining protocols have been steadily optimized to improve detection efficiency. This research reports a continuous effort to simplify the existing silver staining protocols, lower experiment cost, and improve DNA detection sensitivity and image clarity. The new method only requires three reagents (silver nitrate, sodium hydroxide, and formaldehyde) and 6–7 min with high detection sensitivity to visualize as low as 14.6 pg (3.3 pg/mm²) of DNA in a non‐denaturing polyacrylamide gel. In comparison to previous reported protocols, the new one has the highest resolution, is the easiest to operate, takes the shortest time, and uses the fewest chemical reagents. Therefore, the new method can be used for quick generation of high quality molecular marker data in genetic analysis.     

A nafion/crown ether film electrode and its application in the anodic stripping voltammetric determination of traces of silver

Glassy carbon electrodes are modified by coating with dicyclohexyl-18-crown-6 in Nafion-117. The electrode is used for a very sensitive anodic stripping voltammetric determination of silver. High sensitivity is obtained owing to the release of crown molecules from the silver-crown complex during the deposition. The detection limit is 2×10^?12 M after electrodeposition for 30 min. The recommended supporting electrolyte is 4×10^?3–7×10^?3 M potassium chloride in 0.01 M nitric acid with a deposition potential of ?0.30 V vs. SCE and a linear potential scan. Three typical calibration graphs were linear over the range 2×10^?11–1×10^?8 M for deposition times of 30, 20 and 8 min, respectively. The silver content of reagent-grade ammonium nitrate was found to be 0.48×10^?4% with a relative standard deviation of 3.7% (n=7) for parallel determinations.     

In-Situ Formation of Modified Nickel–Zinc-Layered Double Hydroxide Followed by HPLC Determination of Neonicotinoid Insecticide Residues

A single-step preconcentration procedure using the in-situ formation of modified nickel–zinc-layered double hydroxides (LDHs) prior to high-performance liquid chromatography (HPLC) is investigated for the determination of neonicotinoid insecticide residues in honey samples. The LDHs could be prepared by the sequential addition of sodium hydroxide, sodium dodecyl sulfate, nickel nitrate 6-hydrate and zinc nitrate 6-hydrate, which were added to the sample solution. The co-precipitate phase and phase separation were obtained by centrifugation, and then the precipitate phase was dissolved in formic acid (concentrate) prior to HPLC analysis. Various analytical parameters affecting extraction efficiency were studied, and the characterization of the LDHs phase was performed using Fourier-transformed infrared spectroscopy and scanning electron microscopy. Under optimum conditions, the limit of detection of the studied neonicotinoids, in real samples, were 30 μg L⁻¹, for all analytes, lower than the maximum residue limits established by the European Union (EU). The developed method provided high enrichment, by a factor of 35. The proposed method was utilized to determine the target insecticides in honey samples, and acceptable recoveries were obtained.     

Electrochemical determination of nitrate on Ag nanoparticles-decorated poly (direct blue 15) electrodes

In this study, for the first time, the electro-polymerization of Direct blue15 (DB15), an azo dye, was carried out on the surface of ITO. Furthermore, the poly(DB15) surface was electrochemically decorated with Ag nanoparticles (AgNPs), and the fabricated AgNPs/PDB15 electrodes were examined as nitrate sensors. Compared to unmodified ITO electrode, the AgNPs/PDB15 electrode had greatly improved electrochemical response to nitrate reduction. The nitrate determination in a linear range from 1.0×10⁻⁵ mol L⁻¹ to 2.27×10⁻³ mol L⁻¹ was performed with a detection limit of 9.66 μM. The synthesized electrode is a promising sensor for the electrochemical detection of nitrate pollutants in water.     

Determination of nitrate with a flow-injection system combining square-wave polarographic detection with on-line deaeration

The combination of a flow-injection system with square-wave polarography and on-line deaeration is applied to the determination of nitrate, utilizing the catalytic reaction between nitrate and uranyl ion. The method is simple, rapid (60 samples h^?1), sensitive and accurate, with a detection limit of 2 μM nitrate. The method has been applied to the determination of nitrate in drinking and river waters.     

Method optimization for quantitative analysis of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) by liquid chromatography-electrospray ionization mass spectrometry

A simple, sensitive LC-ESI-MS method was optimized for quantitative analysis of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) in environmental samples. Under negative ionization mode, HMX can form adduct ions with various organic acids and salts, including acetic acid, formic acid, propionic acid, ammonium nitrate, ammonium chloride, sodium nitrite, and sodium nitrate. Acetic acid was chosen as additive and the ion, [M + CH₃COO]⁻ with m/z = 355 was used for selective ion monitoring (SIM) in this study. Good sensitivity was achieved with low acetic acid concentration in the mobile phase and relatively low capillary temperature. The method detection limit was 0.78 pg for HMX in standard solution. Linearity (R² > 0.9998) was obtained at low concentrations (0.5-50 μg/L). This method has been used to determine HMX concentrations in water samples and lizard egg samples from an animal exposure study.     

Electrochemically Generated Copper(I)-Catalyzed Click Chemistry: Triazole Synthesis and Insights into Their Photophysical Properties

Herein, we report the electro-click (e-CLICK) reaction via electrochemically generated copper(I) catalytic species. The reaction worked under constant potential electrolysis (−0.25 V) with copper(II) nitrate and 2,2′-bipyridine serving as pre-catalyst and ligand respectively. The reaction accommodates electronically different organic azides and terminal alkynes to afford 1,2,3-triazoles in good synthetic yields with excellent 1,4-regioselectivity. Compared to traditional click chemistry, the developed e-CLICK methodology avoids the use of external reducing agents such as sodium ascorbate. Absorptive properties of selected triazole products were assessed by UV-visible electronic spectra. Triazole ( 3 e ) was further applied for the spectrophotometric detection of Co²⁺ and Cu²⁺ species.     

Pervaporation-flow injection with chemiluminescence detection for determination of iodide in multivitamin tablets

This paper describes the use of a pervaporation (PV) technique in a flow injection (FI) system for selective improvement in iodide analysis. Iodide in the sample zone is oxidized to iodine, which permeates through a hydrophobic membrane. Detection of the diffused iodine is achieved using the chemiluminescent (CL) emission at 425 nm that results from the reaction between iodine and luminol. The method was applied for the analysis of some pharmaceutical products, such as nuclear emergency tablets and multivitamin tablets. Ascorbic acid present in multivitamin samples interfered seriously with the analysis, and off-line sample treatment using anion exchange resin was employed to successfully remove ascorbic acid before the analysis. Ascorbic acid was flushed from the column using 0.4 M sodium nitrate followed by elution of iodide with 2 M sodium nitrate. The detection limit (3S.D.) of the system was 0.5 mg l⁻¹, with reproducibility of 5.2% R.S.D. at 5 mg l⁻¹. Sample throughput was determined as 30 injections h⁻¹. There was good agreement between iodide concentrations from extracted samples determined using four different methods, i.e., PV-FI, gas diffusion-flow injection, potentiometry and ICP-MS. A comparison of the analytical features of the developed pervaporation system with these of the previously reported chemiluminescence gas diffusion-flow injection previously reported is also described.     

Molecular emission cavity analysis: Part 23. Determination of Nitrite and Nitrate after Conversion to Nitrogen Monoxide

Molecular emission cavity analysis is applied to the determination of nitrite and nitrate after their reduction to nitrogen monoxide by iodide or zinc. The white emission stimulated from nitrogen monoxide in an oxy-cavity placed in a hydrogen—nitrogen diffusion flame is measured at 526 nm. Calibration graphs are linear up to 300 μg N ml^-1; the detection limit is 0.5 μg N ml^-1 for nitrite and 2 μg N ml^-1 for nitrate. There are few interferences. Procedures for the determination of nitrite and nitrate in admixture are described.     

Chemometric approach to the optimisation of LC-FL and GC-MS methods for the determination of nitrite and nitrate in some biological,food and environmental samples

Gas chromatography–mass spectrometry (GC-MS) method and a liquid chromatography–fluorescence (LC-FL) detection method using experimental design and optimisation approach were improved for the quantitative determination of nitrite and nitrate in biological, food and environmental samples. The obtained recoveries of nitrite and nitrate ions from samples based on both GC-MS and LC-FL results ranged from 98.5% to 98.9% for nitrite and 97.9% to 98.4% for nitrate. The precision of these methods, as indicated by the relative standard deviations (RSDs), was within the range from 2.4% to 3.6% for nitrite and 2.5% to 3.8% for nitrate, respectively. The limits of detection of nitrite and nitrate ions from samples based on GC-MS and LC-FL results ranged from 0.01 to 0.14 ng L^?1 for nitrite and 0.02 to 0.71 ng L^?1 for nitrate, respectively. The optimised isolation procedure by central composite design was successfully applied to real samples. The results revealed that the proposed procedure combined with GC-MS and LC-FL techniques is more sensitive, reliable and selective compared to the other methods available for the precise determination of trace levels of nitrite and nitrate in biological, food and environmental samples.     

Thermal Decomposition of Some Chemical Compounds Used As Food Preservatives and Kinetic Parameters of This Process

Thermal decomposition processes of selected chemicals used as food preservatives such as sodium formate, sodium propionate, sodium nitrates(V and III) and sodium sulphate(IV) were examined by the derivatographic method. Based on the curves obtained, the number of decomposition stages and characteristic temperatures of these compounds have been found. Mass decrements calculated from TG curves ranged from 28.9% for sodium formate to 77.8% for sodium nitrate(V), while sodium sulphate showed a mass increment of 5.6%. Kinetic parameters such as activation energy (E _a ), frequency factor (A ) and reaction order (n ) were calculated from TG, DTG and T curves. Sodium formate shows the highest values of E _a and A which amount to 171.7 kJ mol^–1 and 5.8⋅10¹⁴ s^–1 , respectively, while the lowest ones, E _a =28.2 kJ mol^–1 and A =3.65⋅10² s^–1 belong to sodium nitrate(V). This revised version was published online in August 2006 with corrections to the Cover Date.