Spectrophotometric determination of sulfate by solvent extraction with the non-ionic surfactant span 20 and crystal violet

The sulfate ion is extracted into toluene with Span 20 (sorbitan monolaurate) and crystal violet. The calibration graph is linear over the range 2.5 × 10^-5–2.5 × 1O^-4 mol l^-1 sulfate (2.4–24 mg l^-1) in the aqueous phase when the extracted crystal violet is measured at 600 nm. The method is applied to natural waters.     

Enzymatic inhibition enthalpimetry: The analytical potential of the inhibitory action of a series of physiologically active alkaloids on the activity of serum cholinesterase

A kinetic method is described for the enthalpimetric determination of a series of physiologically active alkaloids based on their inhibitory effect on the cholinesterase-catalysed hydrolysis of butyrylcholine iodide. All analyses are done at pH 8.0 and at 25.0°C (short term stability ± 0.002°C). Precision (< 3.0%) data are reported for the determination of physostigmine sulphate (1.0–4.0 × 10^-8), quinine sulphate (1.0 × 10^-6–4.0 × 10^-5), procaine hydrochloride (1.0 × 10^-5–× 2.5 × 10^-4), atropine sulphate (5.0 × 10^-5–3.0 × 10^-4), morphine sulphate (1.0–8.0 × 10^-4), codeine phosphate (3.0 × 10^-4–2.4 × 10^-3), pilocarpine nitrate (5.0 × 10^-4––6.0 × 10^-3) and thiamine hydrochloride (1.0–5.0 × 10^-3); the linear response ranges in mol dm^-3 are given in parentheses. Complete inhibition curves are presented and relative “potency” is inferred. The effects of several interfering inhibitors are discussed.     

Electrolytic determination of nanomolar concentrations of silver in solution with a piezoelectric quartz crystal

Silver in solution is determined in situ by the frequency change of a piezoelectric quartz crystal on electrodeposition on the electrode of the crystal. The electrolyte solution flows through a cell containing the platinum-plated electrode (cathode) of the quartz crystal, a coiled platinum-wire anode and a silver—silver(I) chloride reference electrode, and is electrolyzed at —0.2 V vs. $\text{Ag}\text{AgCl}$. The frequency change is proportional to the silver concentration in the range 10^-5–5 × 10^-7 M after electrodeposition for 5 min, and in the range 10^-8–10^-9 M by recycling 20 ml of the solution over the electrodes for 3 h.     

Extraction—spectrophotometric determination of boron with naphthalene-2,3-diol and crystal violet

Boron reacts with naphthalene-2,3-diol to form a complex anion extractable into benzene with crystal violet and is determined indirectly by measuring the absorbance of the crystal violet in the extract at 610 nm. The calibration graph is linear for boron over the range 8.0 × 10^-7–8.0 × 10^-8 mol l^-1; the apparent molar absorptivity is 8.8 × 10⁴ l mol^-1 cm^-1. The method is applied to the determination of boron in natural waters.     

Determination of silver in solution with a piezoelectric detector after electrodeposition

Silver in solution is determined in situ by frequency change of a piezoelectric quartz crystal due to electrodeposition on the electrode of the crystal immersed in the solution. A test solution containing EDTA for masking other metal ions flows through a thermostated cell which contains the crystal with platinum-plated electrodes. The frequency change is proportional to the silver concentration in the range 10^?6?3 × 10^?5 M after electrodeposition for 10 min, and 2 × 10^?7?1 × 10^?6 M for 1 h.     

Differential pulse anodic stripping voltammetry of copper(II) at the glassy carbon electrode

Optimum conditions for the use of the bare glassy carbon electrode (GCE) are reported. Linear calibration graphs are obtained in the range 5 × 10^-7–3.5 × 10^-5 M copper(II). The detection limit for copper(II) is 5.9 × 10^-9 M at pH 4.5 and 3.3 × 10^-8 M at pH 6.5.     

Electrolytic determination of traces of iodide in solution with a piezoelectric quartz crystal

The frequency of a piezoelectric quartz crystal is decreased when iodide is electrodeposited on the silver electrode of the crystal at—0.05 V vs. Ag/AgCl. From 3 × lO^-7 M to 1 × 10^-5 M iodide can be determined with few interferences, and a procedure for removal of interfering species is given. Iodide is removed from the electrode by electrolysis at —0.4 V after each determination.     

Pre-column chelation liquid chromatographic separation and determination of trace V,Cu, Co,Pd, Fe and Ni

Conditions for the separation by reversed-phase liquid chromatography (LC) of V(V), Cu(II), Co(III), Pd(II), Fe(III) and Ni(II) chelates with 2-(5-bromopyridylazo)-5-diethylaminophenol (5-Br-PADAP) were studied. Six species of metal chelates were separated successfully with methanol-acetonitrile-water (72:12:16, v/v/v) containing 0.13 M NaCl and 0.29 mM cetyltrimethylammonium bromide (pH 5.0) as the mobile phase on a Nucleosil C₁₈ (5 μm) column (250 × 4 mm i.d.).The conditions of the determination of these metal chelates are discussed. A simple and rapid method for the determination of trace amounts of V(V), Cu(II), Co(III), Pd(II) and Ni(II) simultaneously by reversed-phase LC has been developed. The detection limits are 5 × 10^?12, 1 × 10^?10, 3 × 10^?11, 5.3 × 10^?9 and 2 × 10^?10 g, respectively. The method is applied to the determination of these metals in natural waters and mineral samples.     

Parabens determination with a hybrid FIA/HPLC system with ultra-short monolithic column

The combination of an ultra-short C18 monolithic column (5 mm long) with a flow injection analysis (FIA) scheme results in a versatile and efficient system that has been used for the chromatographic determination of four preservatives — methylparaben (MP), ethylparaben (EP), propylparaben (PP) and butylparaben (BP). The separation is carried out by using two carriers, A and B, consisting of a mixture of ACN: water in different proportions. The described procedure is able to separate the analytes in only 150 s. The applicable concentration range, detection limit and the relative standard deviation were the following: for MP from 1.6 × 10^-5 to 1.1 × 10^-3 M; 4.8 × 10^-4 M; 0.65%; for EP between 3.7 × 10^-5 and 2.0 × 10^-3 M; 1.2 × 10^-5 M; 1.2%; for PP between 3.9 × 10^-5 and 2.0 × 10^-3 M; 1.2 × 10^-5 M; 1.2%; and for BT between 6.0 × 10^-5 and 2.0 × 10^-3 M; 1.8 × 10^-5 M; 1.8%. The method was applied and validated satisfactorily for the determination of these parabens in commercial cosmetics samples, comparing the results with those obtained by HPLC reference method.     

Effect of metal ions on a piezoelectric quartz crystal in aqueous solution and the adsorptive determination of iron(III) as phosphate

At 1.5 V applied between the electrodes on the piezoelectric crystal, many metals electrodeposit on an electrode so that the frequency changes. Iron(III) (1 × 10^?5-1 × 10^?4 M) can be determined by adsorption of iron(III) phosphate which also causes a frequency change. Electrodeposition can be prevented by covering one electrode with a thin glass plate.     

Prediction of the detection ranges for HPLC-peroxyoxalate chemiluminescence detection system of fluorescent compounds

Summary A manual method for predicting the detection ranges of fluorescent compounds for the HPLC-peroxyoxalate chemiluminescence detection system is presented utilizing bis(4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl) oxalate (TDPO) as a chemilumigenic reagent. The generated chemiluminescence decay curves were measured on a photomultiplier and extrapolated to zero time based on the first part of the decay curve. Dipyridamole, perylene, DNS-Ser, Rose Bengal, DNS-Asp, Trp-P-1, pyrencarboxylic acid methyl ester, perfenazine, alimemazine, oxypertine, Glu-P-2, benzydamine and doxorubicin gave chemiluminescence intensity (Icl) values of 3.2 × 10⁶, 2.8 × 10⁶, 2.3 × 10⁵, 2.1 × 10⁵, 1.9 × 10⁵, 1.4 × 10⁵, 9.4 × 10³, 6.2 × 10³, 4.2 × 10³, 3.3 × 10³, 2.3 × 10³, 9.7 × 10² and 3.1 × 10², respectively. The reaction conditions for the HPLC-CL detection system were investigated and optimum conditions obtained.     

Amperometric Biosensor for the Determination of Phenols Using a Crude Extract of Sweet Potato (Ipomoea Batatas (L.) Lam.)

Abstract

An amperometric biosensor for the determination of phenols is proposed using a crude extract of sweet potato (Ipomoea batatas (L.) Lam.) as an enzymatic source of polyphenol oxidase (PPO; tyrosinase; catechol oxidase; EC 1.14.18.1). The biosensor is constructed by the immobilization of sweet potato crude extract with glutaraldehyde and bovine serum albumin onto an oxygen membrane. This biosensor provides a linear response for catechol, pyrogallol, phenol and p-cresol in the concentration ranges of 2.0×10^?5-4.3×10^?4mol L^?1, 2.0×10^?5-4.3×10^?4 mol L^?1, 2.0×10^?5-4.5×10^?4 mol L^?1 and 2.0×10^?5-4.5×10^?4mol L^?1, respectively. The response time was about 3–5 min for the useful response range, and the lifetime of this electrode was excellent for fifteen days (over 220 determinations for each enzymatic membrane). Application of this biosensor for the determination of phenols in industrial wastewaters is presented.     

Direct measurement of the time of residence for holes in the potential well at the surface of an organic crystal with an electrolytic contact

The residence time of holes in the potential well at the surface of an anthracene crystal with electrolytic contacts has been determined from transient currents. It is decreasing from > 10^?7 to 10^?8 s when the external field strength is increasing from 1 × 10⁴ V/cm to 1.3 × 10⁵ V/cm.     

Indirect Differential Pulse Voltammetric Determination of Aluminum Biological Samples in the Presence of 3, 4-Dihydroxyphenylalanine

ABSTRACT

Indirect differential pulse voltammetric (DPV) determination of aluminum in the presence of 3, 4-dihydroxyphenylalanine (L-dopa) with glass carbon electrode as working electrode has been described. The method relies on the decrease of DPV anodic peak current of L-dopa with the addition of Al^III The decreasing value of the peak current is linear with the increase of Al^III concentration. Under the optimum experimental conditions (pH 4.8, 6×10^?4 M L-dopa, 0.06M NaAc - HAc ¹buffer solution), the linear ranges are 4.0×10^?7 - 5.2×10^?6 M and 7.2×10^?6 - 4.5×10^?5 M. The relative standard deviation for 8×10^?6 M aluminum is 1.0% (n = 8) and the detection limit is 3.5×10^?7 M. A number of foreign species for interference have been studied. The method has been applied to determine aluminum in drinking water, synthetic renal dialysate and urine samples.     

Determination Of Amino Acid Based On A Series Piezoelectric Quartz Crystal Sensor

ABSTRACT

A series piezoelectric quartz crystal (SPQC) sensor has been applied to detect L-glutamic acid and L-lysine acid. The effect of formaldehyde solution on the frequency shift was studied. Two methods were discussed. For the calibration curve method, in a neutralized formaldehyde medium, the linear ranges for determining L-glutamic acid and L-lysine acid were from 7.1×10^?6M to 6.5×10^?4M and from 6.9×10^?6 M to 7.4×10^?4 M, respectively, with the detection limit being 7.1×10^?6 M and 6.9×10^?6 M, the recoveries were 99.2% and 100.1%, the R.S.D were 1.63% (n=6) and 1.83%(n=6), respectively. Frequencimetric tiration method was also described and the lowest titratable concentrations were 8.3×10^?5M and 5.5×10^?5 M, respectively.     

Simultaneous Determination of Platinum and Palladium by Second Derivative Spectrophotometry Using 3-(2'-Thiazolylazo)-2, 6-Diaminopyridine as Chromophore Ligand

ABSTRACT

A second derivative spectrophotometric method has been developed for the determination of palladium and platinum in mixtures. The method is based on the formation of the platinum and palladium complexes with 3-(2-thiazolylazo)-2, 6-diaminopyridine, (2, 6-TADAP), in the presence of 1.7 M perchloric acid solution, upon heating at 90° C for 30 min and on the subsequent direct derivative spectrophotometric measurement. The zero-crossing approach and the graphic method were used for determination of platinum and palladium, respectively. Each analyte was determinated in the presence of one another in the ranges 8.9×10^-7 -3.1×10^-5 M for platinum and 4.6×10^-7 - 6.8×10^-5 M, for palladium. The detection limits achieved (3a) were found to be 2.7×10^-7 M of platinum and 1.4×10^-7 M of palladium. The relative standard deviations were in all instances less than 1.0%. In this work is included a study of effect of interferents and the application of the proposed method in synthetic mixtures.     

Spectrophotometric Determination of Sulfate by Solvent Extraction with Nonionic Surfactant Span 20 and Crystal Violet

Abstract

The sulfate ion is extracted into toluene with nonionic surfactant span 20 and crystal violet. A linear calibration curve was obtained between the absorbance due to crystal violet in the extract and sulfate concentrations over the range 2.5 × 10^?5 to 2.5 × 10^?4 mol 1^?1 (2.4 to 24 ppm) in the aqueous phase.     

Study of Fluorescence System of Gmanylic Acid-Tb3+ and the Determination of Gmanylic Acid

Abstract

It was found that gmanylic acid (GMP) can be selectively completed with Tb³⁺ at pH 6.0-6.6, which then emits strong fluorescence characteristic of Tb³⁺. This reaction can be used for the determination of GMP in presence of adenylic acid (AMP), uridylic acid (UMP) and cylidylic acid (CMP). A linear relationship is obtained between the fluorescence intensity and GMP concentration in the range of 2.0×10^?7 - 1.0×10^?4M. The detection limit is 2.0×10^?8 M. The results showed that the composition ratio and apparent stability constant of GMP-Tb complex were 1:1 for GMP Tb³⁺- and 2.3×10^?5, respectively.     

Polarographic and Voltammetric Study of the Sc(III)-Acid Chrome Blue K Complex and Determination of Trace Scandium

Abstract

A new system of polarographic adsorptive wave for determining trace scandium was proposed. In 0.2 mol/L NH₄OAc, the Sc(III)- ACBK [1,8- dihydroxy- 2- (2- hydroxy- 5- sulfo- 1- phenylazo)- 3,6- disulfo- naphthalene, called acid chrome blue K] complex emerged a sensitive adsorptive complex wave(Ep′ = -0.67V). The molar ratio of Sc(III) to ACBK in the complex was established as 1: 2 and the apparent stability constant β₂ = 2.7 × 10¹⁵. But for Y(III), the molar ratio was 1: 1 and β = 1.5 × 10⁵. Because of the particularity of Sc complex, the sensitivity and the selectivity of determination Sc are much better than that of other rare earth ions. The detection limit is 1.1 × 10^?7 mol/L for oscillopolarography and 2.0 × 10^?8 mol/L for adsorptive stripping voltammetry.     

Electrocatalytic determination of hydroquinone with Mn+ modified gold-5-amino-2-mercaptobenzimidazole self-assembled monolayer electrodes

Application of immobilized metal cations on the topside of gold-5-amino-2-mercaptobenzimidazole self-assembled monolayer (Au-5A2MBI-Mⁿ⁺ SAM, Mⁿ⁺:Cu²⁺ or Ag⁺) for electrocatalytic determination of hydroquinone (H₂Q) is described by voltammetric method. Several parameters were investigated to evaluate the performance of the sensors. Calibration curves for H₂Q concentrations were linear from 1.0 × 10^-5 to 4.0 × 10^-4 M (r = 0.998) for Au-5A2MBI, from 1.0 × 10^-5 to 6.0 × 10^-4 M (r = 0.998) for Au-5A2MBI-Cu²⁺, and from 2.0 × 10^-6 to 2.0 × 10^-5 M (r = 0.996) and 1.0 × 10^-4 to 1.0 × 10^-3 M (r = 0.991) for Au-5A2MBI-Ag⁺ SAM modified electrode. The respective detection limits were found as 6.5 × 10^-6, 4.6 × 10^-6 and 1.8 × 10^-7 M. Both Cu²⁺ and Ag⁺ ions were found to have a good electrocatalytic effect on the oxidation of H₂Q; however, Ag⁺ was a more effective catalyst and showed better sensitivity and lower detection limit than all other tested electrodes. Au-5A2MBI-Ag⁺ SAM electrode was used as a suitable sensor for determination of H₂Q in a radiolysis developing agent as real sample. The results obtained by using proposed sensor and that obtained by an ASTM reference method were in good agreement at the 95% confidence level.