The thermal decomposition reactions of [Co(en)n(phen)m]Cl3 complexes

The thermal behaviour of [Co(en)_n(phen)_m]Cl₃ complexes has been studied using thermogravimetry (TG), differential thermogravimetry (DTG) and differential thermal analysis (DTA) in air, nitrogen and oxygen atmospheres. The effect of the stoichiometry of the complexes and that of the gas atmosphere in the furnace chamber on the thermal decomposition reaction is evidenced and discussed. The following thermal stability order has been found [Co(en)₃]Cl₃ [Co(en)₂(phen)]Cl₃ > [Co(en)(phen)₂]Cl₃ [Co(phen)₃]Cl₃     

胺基邻菲咯啉-钌(Ⅱ)反应性荧光指示剂的合成与化学固定的研究

为减少荧光指示剂被水萃取流失,提高荧光膜的使用寿命,将5-氨基-邻菲咯啉与二(4,7-二苯基-邻菲咯啉)二氯化钌(Ⅱ)络合,合成带氨基的荧光指示剂[Ru(dpp)₂(phen-NH₂)]Cl₂,并经氨基键合到有机玻璃表面。以核磁、质谱、红外验证合成荧光指示剂的结构,研究键合条件对染色有机玻璃荧光发射的影响,监测荧光强度随水浸泡时间的变化。合成荧光指示剂的荧光发射峰值波长为570 nm,键合到有机玻璃后发射光谱红移20 nm,荧光强度受溶解氧影响,响应时间约为10 s,氧猝灭比达4。染色有机玻璃的荧光稳定性好,在50 ℃水中浸泡7个月,荧光强度下降小于1%。     

Homo-metathesis of vinylsilanes catalysed by ruthenium carbene complexes

Effective homo-metathesis of a series of dichloro-substituted vinylsilanes H₂C = C(H)SiCl₂R (where R = Me, OSiMe₃, C₆H₅, C₆H₄–Me-4, C₆H₄–CF₃-4) in the presence of second generation Grubbs catalyst [Cl₂(PCy₃)(IMesH₂)Ru(=CHPh)] (I) and Hoveyda–Grubbs catalyst (II) leads to selective formation of E-1,2-bis(silyl)ethenes and ethene. On the basis of the results of experiments with deuterium-labelled reagents, a metallacarbene mechanism has been suggested for these reactions.     

Characterization and crystal structures of copper(II), cobalt(II), and nickel(II) complexes with two kinds of piperidine carboxylic acids

Copper(II) complex with -piperidine-3-carboxylic acid ( -Hpipe-3):[Cu( -pipe-3)₂(H₂O)] and cobalt(II) and nickel(II) complexes with piperidine-4-carboxylic acid (Hpipe-4):[M(Hpipe-4)₂(H₂O)₄]Cl₂ (M: Co, Ni) have been prepared and characterized by means of IR and powder diffuse reflection spectra, thermal analysis, and magnetic susceptibility. The crystal structures of these complexes have been determined by X-ray diffraction. The crystal of [Cu( -pipe-3)₂(H₂O)] is orthorhombic with the space group Pbcn. The copper atom is in a square pyramidal geometry, ligated by two carboxylato oxygen atoms, two nitrogen atoms, and a water molecule. One molecule of this complex consists of either -piperidine-3-carboxylic acid or -piperidine-3-carboxylic acid. The crystals of [M(Hpipe-4)₂(H₂O)₄]Cl₂ are monoclinic with space group P2₁/n. In these complexes the metal atom is in an octahedral geometry ligated by two carboxylato oxygen atoms and four water molecules.     

[Co（NH3）6]Cl3实验中制备条件对配合物形成影响的讨论

针对[Co(NH3)6]Cl3制备实验中,反应条件不同会导致生成具有不同组成的Co(Ⅲ)氨配合物这一问题,系统探讨了制备过程中在配体NH3、Cl-和H2O共存时,[Co(NH3)6]Cl3、[Co(NH3)5Cl]Cl2和[Co(NH3)5(H2O)]Cl3这三种Co(Ⅲ)氨配合物的生成条件和稳定性。通过对比分析各自的形成过程和制备条件,将化学原理应用于解释实验现象,可培养学生结合理论知识对实验案例进行对比分析的探究能力。     

Template-directed Synthesis of Three Metal Oxalates via 4-Connected Building Units

Three novel compounds, [Co（en）3]2[Zr2（C2O4）7]·2H20（HNU-2, en=ethylenediamine）, [Co（NH3）6]· [Ce（CzO4）3（H2O）]·H2O（HNU-3） and [Co（dien）2][Gd（C2On）3]·0.75H2O（HNU-4, dien=dethylenetriamine） were hydro- thermal synthesized based on the templates of [Co（en）3]C13, [C0（NH3）6]C13 and [Co（dien）2]C13, respectively. The Zr4＋ Ce3＋ and Gd3＋ cations are all coordinated by four oxalates to form [M（C2O4）n（H2O）n]m （M=Zr, Ce or Gd; n=0 or 1; m=4 or 5）, which are similar to [In（C2O4）4]5- in NKB-1, and can be regarded as 4-connected building units. The [M（C2O4）a（H2O）n]m units are connected via sharing the bis-bidentate bridging oxalate ligands to form binuclears in HNU-2 and 1D ＂zigzag＂ chains in HNU-3 and HNU-4. cular building units to design 3D open frameworks with It is suggested that these compounds could be used as mole- zeolite topologies.     

Synthesis, structure and hydrogenation catalytic activity of [Ru3(μ3,η-ampy)(μ,η:η-PhC=CHPh)(CO)6(PPh3) (Hampy = 2-amino-6-methylpyridine)

The compound [RU₃(μ₃,η²- -ampy)(μ₃η¹:η²-PhC=CHPh)(CO)₆(PPh₃)₂] (1) (ampy = 2-amino-6-methylpyridinate) has been prepared by reaction of [RU₃(η-H)(μ₃,η²- ampy) (μ,η¹:η²-PhC=CHPh)(CO)₇(PPh₃)] with triphenylphosphine at room temperature. However, the reaction of [RU₃(μ-H)(μ₃, η² -ampy)(CO)₇(PPh₃)₂] with diphenylacetylene requires a higher temperature (110°C) and does not give complex 1 but the phenyl derivative [RU₃(μ₃,η²-ampy)(μ,η ¹:η² -PhC=CHPh)(μ,-PPh₂)(Ph)(CO)₅(PPh₃)] (2). The thermolysis of complex 1 (110°C) also gives complex 2 quantitatively. Both 1 and 2 have been characterized by0 X-ray diffraction methods. Complex 1 is a catalyst precursor for the homogeneous hydrogenation of diphenylacetylene to a mixture of cis- and trans -stilbene under mild conditions (80°C, 1 atm. of H₂), although progressive deactivation of the catalytic species is observed. The dihydride [RU₃(μ-H)₂(μ ₃,η²-ampy)(μ,η¹:η²- PhC=CHPh)(CO)₅(PPh₃)₂] (3), which has been characterized spectroscopically, is an intermediate in the catalytic hydrogenation reaction.     

Structural diversity of lanthanide–amino acid complexes under near physiological pH conditions and their recognition of single-stranded DNA

We reported here four structures of lanthanide–amino acid complexes obtained under near physiological pH conditions and their individual formula can be described as [Tb₂(dl-Cys)₄(H₂O)₈]Cl₂ (1), [Eu₄(μ₃-OH)₄(l-Asp)₂(l-HAsp)₃(H₂O)₇] Cl · 11.5H₂O (2), [Eu₈(l-HVal)₁₆(H₂O)₃₂]Cl₂₄ · 12.5H₂O (3), and [Tb₂(dl-HVal)₄(H₂O)₈]Cl₆ · 2H₂O (4). These complexes showed diverse structures and have shown potential application in DNA detection. We studied the interactions of the complexes with five single-stranded DNA and found different fluorescence enhancement, binding affinity and binding stoichiometry when the complexes are bound to DNA.     

Synthesis of a tripalladium cluster containing an η:η:η-bridging butadienyl ligand stabilized by a zwitterionic structure

An η¹-butadienyl complex [trans-η¹-CH₂=C(Me)C=CH₂Pd(PPh₃)₂Cl] (1) reacted with [(μ-η²:η²-1,3-butadiene)Pd₂(PPh₃)(μCl)Cl] (2) to result in displacement of the diene ligand of 2 accompanied by exchange of PPh₃ of 1 with Cl anion of 2 producing a butadienyl tripalladium cluster [(μ-CH₂=C(Me)C=CH₂)Pd(PPh₃)Cl₂ · Pd₂(PPh₃)₂(μ-Cl)] (3) stabilized by the zwitterionic structure in moderate yield. The X-ray structure analysis of 3 revealed rigid binding of [Pd₂(PPh₃)₂(μ-Cl)]⁺ and [CH₂ =C(Me)C=CH₂Pd(PPh₃)Cl₂]⁻ through the π-bond coordination of the butadienyl group to the dipalladium cation.     

Ring-opening metathesis polymerization of norbornene and norbornadiene by tungsten(II) and molybdenum(II) complexes

The reaction of norbornene (NBE) and norbornadiene (NBD) in the presence of seven-coordinate tungsten(II) and molybdenum(II) complexes of the [(CO)₄M(μ-Cl)₃M(SnCl₃)(CO)₃] and [MCl(M′Cl₃)(CO)₃(NCMe)₂] (M=W, Mo; M′=Sn, Ge) types leads to ring-opening metathesis polymerization (ROMP) and to the formation of high molecular weight polymers. The geometric structure of these polymers was determined by means of ¹H- and ¹³C-NMR spectroscopy. The monitoring of the reaction between cyclic olefins and the metal complex by means of ¹H-NMR spectroscopy allowed us to observe the coordination of NBD to metal atoms in the initiation step of the polymerization process. Compounds of the [MCl(SnCl₃)(CO)₃(η⁴-NBD)] type prepared directly from [(CO)₄M(μ-Cl)₃M(SnCl₃)(CO)₃] or [MCl(M′Cl₃)(CO)₃(NCMe)₂] (M=W, Mo) in the presence of an excess of NBD initiate the ROMP reaction immediately. The detection of the first-formed products in the reaction between the metal complex and cyclic olefins provides valuable information concerning the nature of the initiating species.     

Synthesis and ring-opening metathesis polymerization of eight-membered unsaturated lactams and related monomers

Novel eight-membered ring unsaturated lactams were synthesized and tested as monomers for the ruthenium-catalyzed ring-opening metathesis polymerization (ROMP). The reaction of a N-protected cyclic alkeneamine was also investigated. The Grubbs’ benzylidene complexes RuCl₂(=CHPh)(PCy₃)₂ or RuCl₂(=CHPh)(PCy₃)(IMesH₂) and selected ruthenium–arene species bearing either phosphine or stable Arduengo-type N-heterocyclic carbene ligands served as catalyst precursors. In most cases, isomerization of the starting materials took place and only 1-benzyl-1-aza-2-ketocyclooct-5-ene afforded a polymeric product. This polyamide was characterized by numerous analytical techniques.     

Schwefel(IV)-Verbindungen als Liganden XVII. Übergangsmetall-vermittelte Insertion von Schwefeldioxid in die C---O-Einfachbindung

Methoxyethyliron complexes [Cp(CO)(L)Fe(CH₂CHROMe)] (L = CO, P(OPh)₃; R = H, Me) insert SO₂ into the C---O single bond wih formation of metalated sulphonic acid esters [Cp(CO)(L)Fe(CH₂-CHRSO₂OMe)]. the insertion is stereospecific wih retention of configuration at carbon. The complexes [Cp(CO)₃M(CH₂CHRSO₂OMe)] (M = Mo, W; R = H, Me) are obtained analogously. Oxidation of [Cp(CO)₃W(CH₂CH₂SO₂OMe)] wih iodine gives the ionic tungsten(IV) alkyl complex [Cp(CO)₃(I)W(CH₂CH₂SO ₂OMe)]⁺. Triphenylphosphine converts [Cp(CO)₃Mo(CH₂CHRSO₂OMe)] into acyl complexes [Cp(CO)₂(Ph₃P)Mo(C(O)CH₂CHRSO ₂OMe)] (R = H, Me), which upon oxidation with Ce^IV in MeOH yield the diesters MeOC(O)CH₂CHRSO₂OMe.     

The use of thermotropic liquid crystals in organometallic chemistry. Synthesis of new mercury, silver and gold complexes with 4,4′-disubstituted azob

Liquid crystalline 4-XC₆H₄N=NC₆H₄X-4′ [X = C₄H₉ (1a), C_1OH₂₁ (1b), OC₄H₉ (1c), OC₈H₁₇(1d)] can be easily prepared in high yields from the corresponding anilines. In order to study the influence of metals on the thermal properties of these materials, we have obtained adducts [AuCl ₃(4-C₄H₉OC₆H₄N=NC₆H₄OC₄H₉-4′)] (2) and [Ag(OC1O₃)L₂] [L = 4-XC₆H₄N=NC₆H₄X-4′; X = OC₄H, (3a), OC₈H₁₇ (3b)]. The silver adducts show themotropic behaviour. Mercuriation of dialkylazobenzenes 1a-b takes place with [Hg(OAc)₂] and LiCl to give [Hg(R)Cl] [R = C₆H₃(N=NC₆H₄X-4′)-2, X-5; X = C₄H₉ (bpap) (4a), C₁₀H₂₁ (dpap) (4b)] while dialkoxyazobenzenes 1c–d require [Hg (OOCCF₃)₂] to obtain [Hg(R)Cl] [R = C₆H₃(N---NC₆H₄X-4′)-2, X-5; X = OC₄H₉ (bxpap) (4c), OC ₈H₁₇ (4d)]. 4a-c react with NaI to give [HgR₂] [R= bpap (5a), dpap (5b), bxpap (5c), oxpap (5d)l. Both chloroaryl-, 4a and 4c, and diaryl-mercurials, 5a and 5c, act readily as transmetailating agents towards [Me₄N] [AuCl₄] in the presence of [Me₄N]Cl to give [Au(η²-R)Cl₂] [R = bpap (6a), bxpap (6b)]. After reaction of [AuCl ₃(tht)] (tht = tetrahydrothiophene) with [Me₄N]Cl and 4b (1:2:1), [Me₄N][Au(dpap)Cl₃] (7) can be isolated. C---H activati bxpap (8b)]. None of the complexes 4–8 shows mesomorphic behaviour.     

Titanium imido complexes containing 1,3,5-triazacyclohexane ligands

The syntheses of the 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane-supported imido complexes [M(NR)(R′₃tach)Cl₂] (M = Ti or Zr (NMR only); R = Bu^t or 2,6-C₆H₃Prⁱ₂; R′ = Me or Bu^t) are reported, along with that of the thermally robust dibenzyl derivative [Ti(NBu^t)(Me₃tach)(CH₂Ph)₂]. The tert-butylimido ligand in [Ti(NBu^t)(Me₃tach)Cl₂] undergoes exchange with ArNH₂ (Ar = 4-C₆H₄Me or 2,6-C₆H₄Me or 2,6-C₆H₃Prⁱ₂) to form the corresponding arylimides [Ti(NAr)(Me₃tach)Cl₂]. The Me₃tach ring in [Ti(NR)(Me₃tach)Cl₂] undergoes slow exchange with Bu^t₃tach or Me₃tacn (1,4,7-trimethyl-1,4,7-triazacyclononane) to give the ring-exchanged products [Ti(NR)(Bu^t₃tach)Cl₂] and [Ti(NR)(Me₃tacn)Cl₂], respectively. The complexes [Ti(NR)(Me₃tach)X₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂; X = Cl or CH₂Ph) exhibit room-temperature dynamic NMR behaviour via an unusual trigonal twist of the facially coordinated Me₃tach ligand, and the activation parameters for these processes have been measured and are discussed. The X-ray structures of [Ti(NR)(Bu^t₃tach)Cl₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂) and [Ti(NBu^t)(Me₃tach)(X)₂] [X= Cl or CH₂Ph) are reported. Me₃tach and Bu^t₃tach = 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane, respectively.     

The phenomenon of conglomerate crystallization: Part 52. Stereochemical control of the crystallization pathway by small alterations of ligands

The X-ray structure analysis of mer-trans-[Co(aepn)Cl₂(OH₂)](ClO₄)·H₂O (1) (aepn=N-(2-aminoethyl)-1,3-propanediamine) reveals that the compound crystallizes in an enantiomorphic space group P2₁2₁2₁ implying a spontaneous resolution of its racemic solution, known as conglomerate crystallization. Substitutions of the two chloride ligands with bromides result in the isostructural compound mer-trans-[Co(aepn)Br₂(OH₂)](ClO₄)·H₂O (2), which also crystallizes as a conglomerate in the space group P2₁2₁2₁. Meanwhile, a substitution of the coordinated OH₂ of 1 with NH₃ gives mer-trans-[Co(aepn)Cl₂(NH₃)](ClO₄) (3), which crystallizes as a simple racemate in P2₁/n space group. When N-(3-aminopropyl)-1,3-propanediamine (dpt) is used instead of aepn in the preparation of 1, it gives racemic crystals of mer-trans-[Co(dpt)Cl₂(OH₂)](ClO₄) (4) whose molecular packing pattern is identical to that of 3. In the conglomerate structures, the protons of coordinated water ligand are strongly hydrogen-bonded to the oxygen of a water of crystallization to form a spiral packing structures. In the packing structures of 3 and 4, two molecules of opposite chirality are brought together around a crystallographic center of inversion by hydrogen bonds of the protons of the corresponding tridentate amine ligand with oxygens of perchlorate anion.     

有机膦溴化钯(Ⅱ)配合物的合成、结构及其催化偶联反应活性

以PdBr2为起始原料,分别选择二叔丁基苯基膦((t-Bu)2PPh)、二叔丁基-(4-二甲基氨基苯基)膦(Amphos)、4,5-双二苯基膦-9,9-二甲基氧杂蒽(Xantphos)为有机膦配体,通过溶剂的配位加成和有机膦的配位取代,合成出3种溴化钯配合物,以寻找性能更佳的偶联催化剂.借助元素分析仪、核磁共振仪及单晶...     

三嗪-吡唑钌配合物的合成、结构及光催化活性

光催化具有无污染、安全高效等优点,已成为环保领域的研究热点。 本文选择2,4-二(3,5-二甲基吡唑)-6-二乙基胺-1,3,5-三嗪(L₁)和2, 6-二[3-(5-甲基吡唑基)]吡啶(L₂)为配体、以RuCl₃为金属源,合成了3种配合物[Ru(L₁)Cl₃](1)、[Ru(L₂)₂]·Cl₃(2)和[Ru(L₂)₂]·(H₂BTC)·(HBTC)·H₂O(3),同时进行了IR、UV-Vis、TG及X射线衍射等表征,并对配合物在光催化降解罗丹明B方面进行了探讨,结果表明,配合物13均具有一定程度的光降解效果,降解效果分别为46.8%、44.7%和40.4%。 相同条件下,加入H₂O₂后的配合物13的降解效果比金属盐、配体及H₂O₂单独存在时的降解效果好。     

The evaluation of singlet-triplet separations for [W2(μ-H)(μ-Cl)Cl4(μ-dppm)2] and [W2(μ-H)2 (μ-O2CC6H5)2(P(C6H5)3)2] based on P NMR and crystallographic data

The singlet-triplet separations for the edge-sharing bioctahedral (ESBO) complex W₂(μ-H)(μ-Cl)(Cl₄(μ-dppm)₂ · (THF)₃ (II) has been studied by ³¹P NMR spectroscopy. The structural characterization of [W₂(μ-H)₂(μ-O₂CC₆H₅)₂Cl₂(P(C₆H₅)₃)₂] (I) by single-crystal X-ray crystallography has allowed the comparison of the energy of the HOMOLUMO separation determined using the Fenske-Hall method for a series of ESBO complexes with two hydride bridging atoms, two chloride bridging atoms and the mixed case with a chloride and hydride bridging atom. The complex representing the mixed case, [W₂(μ-H)(μ-Cl)Cl₄(μ-dppm)₂ · (THF)₃] (II), has been synthesized and the value of −2J determined from variable-temperature ³¹P NMR spectroscopy.     

Success and serendipity during studies aimed at preparing carbenerhodium(I) complexes

The preparation of a series of new square-planar and half-sandwich type carbenerhodium(I) complexes will be described. The key to success is the use of the bis(stibane)rhodium compound trans-[RhCl(C₂H₄)(SbiPr₃)₂] as starting material from which in a stepwise manner the complexes trans-[RhCl(=CRR′)(SbiPr₃)₂] (L = PiPr₃, AsiPr₃, SbEt₃) and [C₅H₅Rh(=CCR′)L] (L = SbiPr₃, PiPr₃, PMe₃, CO, CNtBu) have been obtained. Displacement of the carbene ligand in either trans-[RhCl(=CPH₂)L₂]L = SbiPr₃, PiPr₃ or [C₅H₅Rh(=CPh₂)(PiPr₃)] by CO or CNtBu leads to the formation of the corresponding carbonyl- or isocyanidrhodium compounds and the C---C coupling products Ph₂C=C=O and Ph₂C=C=NtBu, respectively. The carbene ligand is also involved in the selective formation of the isomeric olefins CH₂=CHCPh₂H and Ph₂C=CHCH₃ on treatment of trans-[RhCl(=CPh₂)(SbiPr₃)₂] and trans-[RhCl(=CPh₂)(PiPr₃)₂] with ethene. The most spectacular reaction of the bis(triisopropylstibane) complexes, however, occurs on warming of trans-[RhCl(=CRR′)(SbiPr₃)₂] in the absence of any substrate which yields the first representatives of dinuclear transition-metal compounds containing a tertiary stibane ligand in a bridging position. Some exploratory studies on the reactivity of the Rh₂(μ-SbiPr₃) complexes indicate that the triisopropylstibane can be replaced by SbMe₃, SbEt₃ or CNtBu without destroying the dimetallic core of the molecule.     

ADMET copolymerization of divinyltetraethoxydisiloxane with 1,9-decadiene catalyzed by Grubbs’ catalyst

The acyclic diene metathesis (ADMET) copolymerization of divinyltetraethoxydisiloxane with 1,9-decadiene, catalyzed by RuCl₂(=CHPh)(PCy₃)₂, is the first example of a siloxylene–vinylene–alkenylene copolymer reported in the literature. This copolymer was isolated and characterized by ¹H, and ¹³C NMR spectroscopy and GPC analysis (M_n=18 000, PDI=2.9).