Compression induced helical nanotubes in a spreading film of a bolaamphiphile at the air/water interface

Inspired by the elegant helical structures endowed by mother nature, we designed an L-glutamic acid terminated bolaamphiphile and obtained helical nanotubes through the manipulation on the two-dimensional Langmuir films at the air/water interface. It has been found that on the subphase with a pH value lower than 3, stable monolayers with plateau regions were obtained for the bolaamphiphile. Although a flat and uniform morphology was observed for the film deposited at a surface pressure below the plateau region, helical nanotube structures were obtained when the film was compressed over the plateau region. It was suggested that the compression of the monolayer at the air/water interface caused the one end of the bolaamphiphile to leave from the water surface and form an intermediate monolayer in which one end group attached on the water surface and the other extruded in the air. Such an intermediate monolayer subsequently rolled into a helical structure due to the chiral nature of the L-glutamic acid headgroup.     

Multilayer structure of an unsymmetrical monolayer lipid membrane with a 'head-to-tail' interface

A synthetic unsymmetrical 1-galactosamide bolaamphiphile self-assembles in methanol to form a multilayer structure comprising unsymmetrical monolayer lipid membranes linked via a sugar-carboxylic acid H-bonding interface.     

Configuration and photochemical reaction of a bolaamphiphilic diacid with a diazo resin in monolayers and Langmuir-Blodgett films

The monolayer formation of a bolaamphiphile, 1,18-octadecanedicarboxylic acid (ODA), on pure water and the subphase containing a positively charged photoactive 2-nitro-N-methyldiphenylamine-4-diazoniumformaldehyde resin (NDR) have been investigated by pi-A isotherms, pi-t curves, and Brewster angle microscopy (BAM) measurements. It has been revealed that although an unstable monolayer was formed by ODA alone, a stable complex monolayer between ODA and NDR could be formed at the interface through electrostatic adsorption and hydrogen bonding. It has been shown that the ODA formed a U-shaped monolayer at a lower pressure and was converted to a stretched configuration upon compression to a higher surface pressure on the subphase containing NDR. Under UV irradiation at the interface photoreaction can occur in the complex monolayer, which causes shrinkage of the monolayer. Photochemical reactions can also occur in deposited Langmuir-Blodgett films. In reactions occurring at the air/water interface, the two ends of ODA can react with NDR to form an ester containing aromatic rings. This makes the compound more hydrophobic and can easily be stretched without any phase transition upon compression. When the film with U-shaped configuration was deposited onto solid substrates, the configuration could be kept even upon photoirradiation.     

Synthesis and properties of a novel bolaamphiphile surfactant derived from proline

A novel bolaamphiphile surfactant N,N0-(octane-1,8-diyl)bis(pyrrolidine-2-carboxamide)(DAOP), was designed and synthesized from proline and 1,8-diaminooctane, as the hydrophilic part and hydrophobic part, respectively. After separation and purification, the structures of the synthesized bola surfactants were verified by IR, MS and~1 H NMR. The p Kawas measured by a titration experiment, the turbidity was determined using a Shimadzu UV-1750 spectrophotometer, and the critical micelle concentration(CMC)values of the synthesized surfactants in water were obtained using the conductivity and fluorescence probe measurements. The synthesized bolaamphiphile surfactants demonstrate the ability of selfassemble to form vesicles that were confirmed with dynamic light scattering and transmission electron microscopy. The results showed that the novel bolaamphiphile surfactant derived from proline might potentially be an excellent carrier for drug delivery.     

Coagulation and stabilization of sterically functionalized magnetite nanoparticles in an organic solvent with different technical polymers

Single crystalline zinc tin oxide (ZTO) nanocrystallites were prepared at room temperature through association with a peptide-containing bolaamphiphile molecule. The bolaamphiphile molecules self-assembled to form spherical structures with creation of ZTO nanocrystallites inside. ZTO nanocrystallite synthesis was achieved only when the bolaamphiphile molecule was present, while a mixture of amorphous Sn and Zn precipitates was formed in the absence of the bolaamphiphile molecule. The bolaamphiphile molecule is thought to stabilize the Zn(2+) and Sn(4+) precursor ions by ligation and to induce subsequent condensation forming crystalline ZTO. The ZTO formation was achieved only at a strong acidic condition that promotes dissociation and ionization of Zn and Sn precursors and represses formation of ZnO and H(2)SnO(3). The prepared ZTO nanocrystallites had almost the same band gap energy as ZTO nanoparticles prepared by the conventional hydrothermal process. The outcomes of this study indicate that the controlled mineralization of metal precursor ions in a peptide-containing bolaamphiphile molecule suspension can be an alternative method to synthesize metal oxides at room temperature, while maintaining their crystalline structure and optoelectrical properties.     

Structure-property relationship in stimulus-responsive bolaamphiphile hydrogels

The formation of temperature-, concentration-, and pH-responsive hydrogels composed of the symmetric long-chain bolaamphiphile dotriacontane-1,1'-diyl bis[[2-(dimethylammonio)ethyl]phosphate] (Me(2)PE-C32-Me(2)PE) was investigated by rheological, scattering, and spectroscopic techniques. At pH 5, this bolaamphiphile is known to form a dense network of helically structured nanofibers (K?hler et al. Soft Matter 2006, 2, 77-86). Rheological measurements and dynamic light scattering were used to describe the macroscopic behavior of the hydrogels. Small-angle neutron scattering (SANS) and time-resolved static light scattering were applied to get information about the morphology of the self-assembled aggregates. Finally, solid-state 31P NMR spectroscopy was used to gain insight into the mobility of the bolaamphiphile molecules within the fiber aggregates. In comparison with the previously examined trimethylammonio analogue PC-C32-PC, which forms temperature-dependent hydrogels, Me(2)PE-C32-Me(2)PE exhibits additional concentration- and pH-dependent gelling properties. The significantly higher stability of the Me(2)PE-C32-Me(2)PE hydrogel is supported by the SANS data, which indicate the presence of fiber aggregates up to 50 degrees C.     

Temperature-dependent aggregation behavior of symmetric long-chain bolaamphiphiles at the air-water interface

The behavior of the symmetric long-chain bolaamphiphiles dotriacontane-1,32-diyl bis[2-(trimethylammonio)ethyl phosphate] (PC-C32-PC), and dotriacontane-1,32-diyl bis[2-(dimethylammonio)ethyl phosphate] (Me(2)PE-C32-Me(2)PE) at the air-water interface was investigated by means of temperature-dependent film-balance measurements and Brewster angle microscopy. Upon compression of the monolayer the isotherms show a strong surface pressure increase. We assume that at high pressure the monolayer consists of molecules in a reversed U-shaped conformation. At an area of 0.9-1.1 nm(2) per molecule a plateau is reached for both bolaamphiphiles, which marks the beginning of an aggregate formation on the water surface. The plateau pressure increases with increasing temperature. For PC-C32-PC at 6.7 degrees C curved shorter fibrous domains with a diameter of 20-30 mum are seen on the water surface, whereas at 29.2 degrees C stripelike domains with a thickness of 200-500 mum are observed. Isotherms recorded within this temperature range show a characteristic break within the steep slope marking a region where a mixture or a hybrid form of both structures exists. Me(2)PE-C32-Me(2)PE in its zwitterionic state at low pH forms microcrystals on the water surface, whose formation is kinetically retarded. Depending on the temperature, the aqueous subphase is more or less homogeneously covered with a crystalline-like film. In contrast, no aggregates are observed at pH 10 when the bolaamphiphile is negatively charged.     

Self-assembly of a donor-acceptor nanotube. A strategy to create bicontinuous arrays

The self-assembly of bolaamphiphile 1 into nanotubes containing a nanostructured electron donor/acceptor heterojunction is reported. In 10% MeOH/H(2)O, the tetraphenylporphyrin (TPP) and 1,4,5,8-naphthalenetetracarboxylic acid diimide chromophores engage in strong J-type π-π interactions within monolayer rings that further stack into the nanotube assemblies. In 10% MeOH/H(2)O at pH 1 or 11 or in pure MeOH, assembly is driven exclusively by the TPP ring, leading to the formation of nonspecific, unstructured aggregates. Steady-state, time-resolved fluorescence and femtosecond transient absorption spectroscopy revealed a strong dependence of the fluorescence decay and electron-transfer/charge-recombination time constants on the nature of the assemblies. These studies highlight the importance of local nanostructure in determining the photophysical properties of optoelectronic materials.     

Membrane-mimetic films of asymmetric phosphatidylcholine lipid bolaamphiphiles

Membrane-spanning phospholipid bolaamphiphiles either alone or as a constituent of a multicomponent lipid membrane may prove to be facile building blocks for generating robust bioactive membrane-mimetic assemblies. We have previously reported the synthesis of asymmetric dialkyl phospholipid bolaamphiphiles that contain ester linked phosphatidylcholine and amine functionalities at opposite chain ends. In this report, we describe the synthesis of phospholipid bolaamphiphiles that are conjugated to biotin via the terminal amine with or without a poly(ethylene oxide) spacer arm of varying chain length. The behavior of biotinylated bolaamphiphiles as a self-assembled monolayer at an air-water interface was characterized by epi-fluorescence microscopy and revealed that domain structure and pi-A isotherms were substantially influenced by linker type and size. Substrate bound assemblies were produced by Langmuir-Blodgett deposition onto planar substrates coated with an avidin derivatized polyelectrolyte multilayer. Significantly, external reflectance infrared spectroscopy confirmed the fabrication of bolaamphiphile thin films that display extended stability in vitro.     

Rod–disc oligomeric liquid crystal based on 4-cyanobiphenyl and truxene core

A facile synthesis of a novel covalently linked disc–rod mesogen is reported consisting of a truxene-based core attached to which are six 4-cyanobiphenyl units via flexible alkyl spacers. The compound formed a stable Langmuir monolayer at the air–water interface. The atomic force microscope study on the Langmuir–Blodgett film of the molecule reveals a tilted orientation at air–solid interfaces.     

pH-Controlled Supramolecular Self-Assembly of Naphthalenediimide Appended l-Alanine and Ethylenediamine Asymmetric Bolaamphiphile

Design, synthesis and characterization of novel (2S)-2-[7-(2-aminoethyl)-1,3,6,8-tetraoxo-3,6,7,8-tetrahydrobenzo[lmn][3,8]phenanthrolin-2(1H)-yl]propanoic acid ( 1 ) bolaamphiphile, which combine naphthalene diimide (NDI) appended with l -alanine at one end of imide and ethylenediamine at the other end. An l -alanine bearing NDI-based asymmetric bolaamphiphile self-assembled at various pH ranging from 2 to 10 forms a variety of supramolecular nanostructures. The UV-Vis and emission spectroscopic techniques employed for the optical and photophysical properties study of bolaamphiphile 1 at various pH values. It was revealed that the change in pH alters both the optical and photophysical properties of bolaamphiphile 1 . Theoretical calculations used to investigate the electronic properties of the bolaamphiphile 1 . Dynamic light scattering experiments displayed formation of aggregates in solution and scanning electron microscopy (SEM) was used to visualize the nanostructures formed on silicon wafers. Furthermore, the X-ray diffraction was used to determine the nanostructure's packing properties i. e. crystalline/amorphous. Experimental circular dichroism (CD) spectroscopy results inferred and revealed the induction of chirality into the supramolecular systems, which was shown to be pH dependent. This study clearly demonstrates the manipulation of pH can control/tune chiral supramolecular structures and provide future methods for the development of chiral recognition and catalysis study.     

Effects of a bolaamphiphile on the structure of phosphatidylcholine liposomes

This paper describes the morphological characterization of aqueous dispersions of PC amphiphiles and bolaamphiphile AEC by microscopy, the liposomal membrane fluidity, and the zeta potential. Results indicate that the bolaamphiphile AEC can be included within conventional egg-PC liposome bilayers. This behavior could be due to their preference for the stretched conformation within the PC membranes.     

Hydrogen-bonding-mediated vesicular assembly of functionalized naphthalene-diimide-based bolaamphiphile and guest-induced gelation in water

This paper describes the spontaneous vesicular assembly of a naphthalene-diimide (NDI)-based non-ionic bolaamphiphile in aqueous medium by using the synergistic effects of π-stacking and hydrogen bonding. Site isolation of the hydrogen-bonding functionality (hydrazide), a strategy that has been adopted so elegantly in nature, has been executed in this system to protect these moieties from the bulk water so that the distinct role of hydrogen bonding in the self-assembly of hydrazide-functionalized NDI building blocks could be realized, even in aqueous solution. Furthermore, the electron-deficient NDI-based bolaamphiphile could engage in donor-acceptor (D-A) charge-transfer (CT) interactions with a water-insoluble electron-rich pyrene donor by virtue of intercalation of the latter chromophore in between two NDI building blocks. Remarkably, even when pyrene was located between two NDI blocks, intermolecular hydrogen-bonding networks between the NDI-linked hydrazide groups could be retained. However, time-dependent AFM studies revealed that the radius of curvature of the alternately stacked D-A assembly increased significantly, thereby leading to intervesicular fusion, which eventually resulted in rupturing of the membrane to form 1D fibers. Such 2D-to-1D morphological transition produced CT-mediated hydrogels at relatively higher concentrations. Instead of pyrene, when a water-soluble carboxylate-functionalized pyrene derivative was used as the intercalator, non-covalent tunable in-situ surface-functionalization could be achieved, as evidenced by the zeta-potential measurements.     

Molecular packing parameter in bolaamphiphile solutions: adjustment of aggregate morphology by modifying the solution conditions

The geometrical rule of molecular packing parameters in a bolaamphiphile solution was tested with experimental results. By modifying the solution conditions to change the molecular packing parameters, the morphology of the aggregate was successfully manipulated in a single-chain bolaamphiphile, disodium phenyl-1,4-bis (oxyhexanoate) (i.e., C6PhC6Na2 solution). Micelle-vesicle-tube transformation was observed by changing the pH and the addition of NaBr or octanol. In the mixed systems of oppositely charged bola/surfactants, the molecular packing parameter's role is related to the mixing ratio.     

Quantised charging of monolayer-protected nanoparticles

Metal nanoparticles coated with an organic monolayer, so-called monolayer protected clusters (MPCs), can show quantised charging at room temperature due to their sub-attofarad capacitance arising from the core size and the nature of the protecting monolayer. In this tutorial review, we examine the factors affecting the energetics of MPC charging. In the first section, the underlying physics of quantised charging is outlined and we give an overview of the various methods that can be used to measure single electron transfer to nanoparticles. In the subsequent sections, we discuss how electrochemical measurements can be used to give information on the quantised charging of freely diffusing and films of immobilised MPCs. The predictions of models used to determine MPC capacitance are compared with experimental data from the literature.     

Fluorescence microscopic investigation on morphological changes of giant multilamellar vesicles induced by amphiphilic additives

Adding an artificial bolaamphiphile to a dispersion of giant multilamellar vesicles (GMVs) made of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) induced a cup-shaped deformation in GMVs accompanied by partial extrusion of the inner vesicle; thereafter, the deformed vesicles returned to their original shape. On the other hand, when the artificial bolaamphiphile together with a surfactant was added to the vesicular dispersion, these deformation and reformation dynamics were transmitted from the outer membranes in GMVs to the inner membranes until an intact inner vesicle was extruded out of the outer membrane. The microscopic aspects of these processes were investigated using amphiphiles tagged with individual fluorophores.     

Redox‐Active Peptide‐Functionalized Quinquethiophene‐Based Electrochromic π‐Gel

An electrochromic system based on a self‐assembled dipeptide‐appended redox‐active quinquethiophene π‐gel is reported. The designed peptide‐quinquethiophene consists of a symmetric bolaamphiphile that has two segments: a redox‐active π‐conjugated quinquethiophene core for electrochromism, and peptide motif for the involvement of molecular self‐assembly. Investigations reveal that self‐assembly and electrochromic properties of the π‐gel are strongly dependent on the relative orientation of peptidic and quinquethiophene scaffolds in the self‐assembly system. The colors of the π‐gel film are very stable with fast and controlled switching speed at room temperature.     

Mixed micelles formed by SDS and a bolaamphiphile with carbohydrate headgroups

The formation of micelles in aqueous mixtures of a carbohydrate-based bolaamphiphile and sodium dodecyl sulfate (SDS) is investigated by surface tension and small-angle neutron scattering. The obtained values of critical micelle concentration (CMC) are analyzed within the framework of regular solution theory. Synergetic interactions between the bolaamphiphile and SDS are observed (parameter beta is negative; a minimum in the plot CMC vs composition). SANS data are collected for mixtures containing protonated and deuterated SDS. This gives us the possibility to conclude that mixed micelles with a homogeneous distribution of surfactant molecules within the micelle are formed. The shape of the micelles is found to be slightly oblate.     

Surface ordering of a perfluorinated, self-assembled, dendrimer on a water subphase

We have investigated the surface ordering of a synthetic, asymmetric, fan-shaped dendrimer containing a carboxyl core and perfluorinated tails which was obtained by the esterification of the intermediary. X-ray diffraction patterns and transmission electron microscopy (TEM) images show the molecules self-assemble into a hexagonal, cylindrical mesophase. Surface pressure-area isotherms and Brewster angle microscopy measurements show the molecule forms a stable monolayer at the air-water interface with a single phase transition. As a condensed monolayer, the perfluorinated tails are well-packed with hexagonal symmetry with (10) spacing of approximately 0.5 nm from molecular-scale atomic force microscopy (AFM) images. Such dense molecular-scale packing has not been observed in other dendritic molecules thus far. Compared to the case of conventional dendritic molecules with alkyl tails, these molecules occupy a much smaller molecular area due to the strong microphase separation between the carboxylic core and perfluorinated tails at the air-water interface. After monolayer collapse, the irregular islands with terrace morphology are observed in contrast with conventional alkyl-terminated self-assembled dendritic molecules where irregular islands do not appear. The interfacial and internal structure of every terrace shows planar columnar morphology from AFM and TEM imaging. From these results, we discuss the stability of perfluorinated, self-assembled dendrimers on water, as well as how to generate planar morphology on a hydrophilic surface.     

Temperature-dependent behavior of a symmetric long-chain bolaamphiphile with phosphocholine headgroups in water: from hydrogel to nanoparticles

The temperature-dependent self-assembly of the single-chain bolaamphiphile dotriacontan-1,1'-diyl-bis[2-(trimethylammonio)ethyl phosphate] (PC-C32-PC) was investigated by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), X-ray scattering, rheological measurements, and dynamic light scattering (DLS). At room temperature this compound, in which two phosphocholine headgroups are connected by a C(32) alkyl chain, proved to be capable of gelling water very efficiently by forming a dense network of nanofibers (Kohler et al. Angew. Chem., Int. Ed. 2004, 43, 245). A specific feature of this self-assembly process is that it is not driven by hydrogen bonds but solely by hydrophobic interactions of the long alkyl chains. The nanofibers have a thickness of roughly the molecular length and show a helical superstructure. A model for the molecular structure of the fibrils which considers the extreme constitution of the bolaamphiphile is proposed. Upon heating the suspensions three different phase transitions can be detected. Above 49 degrees C, the temperature of the main transition where the alkyl chains become "fluid", a clear low-viscosity solution is obtained due to a breakdown of the fibrils into smaller aggregates. Through mechanical stress the gel structure can be destroyed as well, indicating a low stability of these fibers. The gel formation is reversible, but as a drastic rearrangement of the molecules takes place, metastable states occur.