A high-yielding, one-pot preparation of unsymmetrical glycosyl disulfides using 1-chlorobenzotriazole as an in situ trapping/oxidizing agent

A high-yielding, one-pot methodology for preparing unsymmetrical glycosyl disulfides derived from sugar, alkyl/aryl or cysteine thiols is reported using 1-chlorobenzotriazole (BtCl) as the oxidant. The highlight of the method is the low temperature of coupling (−78 °C) as well as the in situ trapping of the sulfenyl intermediate, which ensures that no homodimer of R¹SH (R¹SSR¹) is formed. The coupling efficiency is independent of sugar type, thiol position in the sugar, sugar-protecting groups, and the various products serve to illustrate the rapid synthetic access to a number of model systems in glycobiology.     

Inexpensive, one-pot synthesis of unsymmetrical disulfides using 1-chlorobenzotriazole

A new synthesis of unsymmetrical disulfides is described. The reaction of a thiol R1SH with 1-chlorobenzotriazole (BtCl) at -78 degrees C in DCM affords a high-yielding conversion to R1SBt without appreciable formation of the symmetrical disulfide R1SSR1. R1SBt is then reacted with R2SH to form the unsymmetrical disulfide in a one-pot sequence with green character that avoids the use of toxic and harsh oxidizing agents. The methodology has been developed for synthesis of various types of disulfides.     

An efficient and convenient synthesis of unsymmetrical disulfides from thioacetates

We have developed convenient methods for the synthesis of functionalized unsymmetrical dialkyl disulfides under mild conditions in very good yields. The designed method is based on the reaction of (5,5-dimethyl-2-thioxo-1,3,2-dioxaphosphorinan-2-yl)-disulfanyl derivatives 1 with functionalized alkyl thiolate anions, generated in situ from thioacetates 2 and sodium methoxide or butylamine. The developed method allows the preparation of unsymmetrical disulfides bearing additional hydroxy, carboxy, amino, azido, biotin, or maleimide functionalities.     

Benign synthesis of unsymmetrical arylurea derivatives using 3-substituted dioxazolones as isocyanate surrogates

ABSTRACT

A phosgene- and metal-free synthesis of unsymmetrical arylurea derivatives utilizing 3-substituted dioxazolones and commercially available amines has been developed. The 3-substituted dioxazolones serve as the precursors of the in situ generated isocyanate intermediates in the presence of non-toxic sodium acetate as a base and methanol as a solvent under mild heating conditions. A series of unsymmetrical phenylureas including N, N’- mono-, di-, and trisubstituted derivatives are chemoselectively obtained in moderate to excellent yields from a broad scope of both 3-substituted dioxazolones and amines without a significant amount of the symmetrical byproducts. In many cases, the resulting unsymmetrical phenylureas are easily separated by filtration allowing no chromatographic purification. These investigations provide an opportunity for facile, practical, and eco-friendly synthesis of unsymmetrical diarylureas. Application of this method is demonstrated toward the gram-scale preparation of anti-cancer drugs, sorafenib and the 3-cycle continuous synthesis in conjugation with the recycle of sodium acetate and methanol process of known herbicide, daimuron.     

3-甲基-1-磺酸咪唑硫酸氢盐催化剂用于四组分一锅法合成不对称聚羟基喹啉衍生物(英文)

3-Methyl-1-sulfonic acid imidazolium hydrogen sulfate has been used as an efficient, halogen-free,and reusable Brnsted acidic ionic liquid catalyst for the synthesis of ethyl-4-aryl/heteryl- hexahydro-trimehtyl-5-oxoquinoline-3-carboxylates via the one-pot condensation of dimedone with aryl/heteryl aldehydes, ethyl acetoacetate, and ammonium acetate under solvent-free conditions. This method has the advantage of being clean and simple, as well as providing the desired product in high yield over a short reaction time. Furthermore, the catalyst could be recycled and reused four times without any discernible reduction in activity.     

A new strategy for the synthesis of unsymmetrical phosphotriesters

A new strategy for the synthesis of unsymmetrical phosphotri-esters was reported: an alcohol was converted to unsymmetrical dialkyl phosphites firstly, which then reacted with the second alcohol or phenol to afford required unsymmitrical triesters in the presence of iodine in high yields under exceptionally mild conditions.     

Facile synthesis of 1-bromo-7-alkoxyl perylene diimide dyes: toward unsymmetrical functionalizations at the 1,7-positions

In this Letter, we report a facile approach to synthesize unsymmetrical 1-bromo-7-alkoxyl perylene diimides by the nucleophilic substitution of one of the two 1,7-dibromo units with an alkyl alcohol using K₂CO₃ as the base. A further replacement of another bromo, for example, by using 4-hydroxylpyridine resulted in unsymmetrical functionalizations at the 1,7-positions. The optical properties of the unsymmetrical PDI derivative were reported and compared with those of the symmetrical derivative.     

One-pot synthesis of aryl alkyl thioethers and diaryl disulfides using carbon disulfide as a sulfur surrogate in the presence of diethylamine catalyzed by copper(I) iodide in polyethylene glycol (PEG200)

A copper catalyzed one-pot protocol for the preparation of aryl alkyl thioethers and diaryl disulfides using carbon disulfide as the sulfur source and diethylamine in polyethylene glycol (PEG200) is described.     

A convenient and selective synthesis of unsymmetrical benzoins via the cyanide ion catalyzed cleavage of benzils

The cyanide ion-catalyzed cleavage of benzils is used for the generation of various ‘masked’ acyl intermediates. The reaction of these intermediates with various aldehydes furnishes the corresponding esters of unsymmetrical benzoins in very good yields. A variety of unsymmetrical benzoin derivatives are synthesized in this way, including ferrocene derivatives. The hydrolysis of benzoin esters and their subsequent oxidation affords the corresponding unsymmetrical benzoins and benzils in high yield.     

Copper-catalyzed amidation of benzoic acids using tetraalkylthiuram disulfides as amine sources

A facile method for the copper-catalyzed synthesis of N-substituted benzamides was explored. In the presence of CuBr and di-tert-butyl peroxide, various N-substituted benzamides were prepared through amidation of benzoic acid by using commercially available and cheap tetraalkylthiuram disulfides as amine sources. With this protocol, a series of 14 N-substituted benzamides were furnished in good to excellent yields. The broad substrate scope and good to excellent yield show its practical synthetic value in organic synthesis.     

A new reagent for the efficient synthesis of disulfides from alkyl halides

Benzyltriethylammonium tetracosathioheptamolybdate [(C₆H₅CH₂N(Et)₃)₆Mo₇S₂₄] has been found to be a superior sulfur transfer reagent for the conversion of alkyl halides to the corresponding disulfides in excellent yields under very mild reaction conditions.     

An efficient and mild protocol for the synthesis of unsymmetrical ureas in the absence of catalyst and additives

<正>A new practical method for the synthesis of unsymmetrical ureas was achieved by reaction of phenylurea with primary and secondary amines under neutral and mild condition in very good yields.The reaction took place in refluxing dioxane and does not require any catalyst or additives.     

PTSA-catalyzed one-pot synthesis of quinoxalines using DMSO as the oxidant

An efficient p-toluene sulfonic acid–catalyzed, one-pot, two-step oxidative system for cyclization of o-diaminobenzene with 1,2-diaryl-2-hydroxyethanone to quinoxalines was described. A nontoxic, readily available oxidant, dimethylsulfoxide (DMSO), was applied in this process. A broad range of substrates was applied to this method, and target compounds were obtained with good yields.     

Facile direct synthesis of unsymmetrical ureas from N-Alloc-, N-Cbz-, and N-Boc-protected amines using DABAL-Me3

A practical synthetic method for the direct synthesis of unsymmetrically substituted ureas from N-Alloc-, N-Cbz-, and N-Boc-protected amines is described. In this study, efficient direct conversion of the Alloc-, Cbz-, and Boc-carbamate compounds to ureas was achieved in the presence of DABAL-Me₃, an air stable and easily handled reagent. Using this reaction method, both protected aromatic and aliphatic amines were successfully transformed into various trisubstituted and tetrasubstituted ureas with high yields without side product. Our findings offer promising guidelines for direct preparation of useful ureas from N-Alloc-, N-Cbz-, and N-Boc-carbamates.     

One-pot synthesis of carbohydrate thionolactones from 1-thiosugars

A general and efficient one-pot method for the synthesis of carbohydrate thionolactones from the corresponding 1-thiosugar is described involving the formation of an intermediate glycosyl S-tert-butyl thiosulfinate in situ by treatment of a thiol with commercially available tert-butylsulfinyl chloride in toluene at room temperature, followed by thermolysis. The method can also be used to generate reactive thioaldehydes and thioketones directly from thiols, which can be trapped in situ with a suitable diene.     

An isocyanide based multi-component reaction under catalyst- and solvent-free conditions for the synthesis of unsymmetrical thioureas

A new and efficient method for the synthesis of thiourea derivatives by a sequential one-pot, three-component reaction between aromatic isocyanides, amines, and 1,2-di-tert-butyldisulfane (DTBS) was developed and 27 different examples were synthesized in good to excellent yields. DTBS was identified as an effective sulfur surrogate without the use of both catalysts and solvents. This protocol does not employ any transition metal catalyst or special experimental setup.     

One-pot synthesis of diarylimidazolium salts from 1H-imidazole

Diarylimidazolium salts(3) were directly synthesized starting from 1H-imidazole(1) by a one-pot strategy using diaryliodonium salts as the arylating reagents.1H-Benzimidazole and 1H-1,2,4-triazole are suitable substrates as well to form the corresponding diarylazolium salts.     

Facile synthesis of polyaniline nanofibers using chloroaurate acid as the oxidant

This work demonstrated a facile route to the synthesis of polyaniline (PANI) nanofibers by polymerization of aniline using chloroaurate acid (HAuCl(4)) as the oxidant. The reduction of AuCl(4)(-) is accompanied by oxidative polymerization of aniline, leading to uniform PANI nanofibers with a diameter of 35 +/- 5 nm and aggregated gold nanoparticles which can precipitate from the liquid phase during the reaction. The resultant PANI nanofibers and gold particles were characterized by means of different techniques, such as UV-vis, FTIR spectroscopy, and scanning and transmission electron microscopy methods. It is found that the gold aggregates are capped with polyaniline, and the conductivity of the fibers is around 0.16 S/cm.     

Phosphine-free cationic rhodium(I) complex-catalyzed disulfide exchange reaction: convenient synthesis of unsymmetrical disulfides

A phosphine-free cationic rhodium(I) complex, [Rh(cod)₂]BF₄, is an effective catalyst for disulfide exchange reaction of symmetrical disulfides to unsymmetrical disulfides under inert atmosphere. This reaction could be carried out using unpurified commercial grade solvents under air without decrease of yields and reaction rates.