Catalytic photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine and carbon dioxide

Photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine (TMB) in MeCN under bubbling of CO₂ proceeded with high catalytic efficiency, giving 3,3-diphenylacrylic acid (DPA) and 3-hydroxy-3,3-diphenylpropionic acid (20). The turnover number (TON=(DPA+20)/TMB) reached 17. Similarly, 1-phenyl-1-cyclohexene yielded cis-2-acetamido-2-phenylcyclohexanecarboxylic acid with TON 5.9. As compared with related N,N-dimethylaniline derivatives, TMB is more resistant to photodecomposition, has the much larger absorbance in the S₀→S₁ transition, and has the lower quenching efficiency by CO₂. Probably these factors are partly responsible for the high TON observed for TMB.     

Semiconductor-mediated oxidative dimerization of 1-naphthols with dioxygen and O-demethylation of the enol-ethers by SnO2 without dioxygen

Oxidative dimerization of 1-naphthols 1 with dioxygen in the presence of a semiconductor, such as SnO₂, ZrO₂, or activated charcoal, as a catalytic mediator takes place selectively to give the corresponding 2,2′-binaphthols 2 or 2,2′-binaphthyl-1,1′-quinones 3 in excellent yields without light irradiation. The catalytic activity of SnO₂ could be fully restored by appropriate reactivation treatment after the oxidation. In addition, SnO₂ without dioxygen catalyzes selective O-demethylation of the enol-ethers 3 to 4.     

Synthesis and characterization of new Rh complexes bearing CO, PPh3 and chelating P,O- or Se,Se-ligands: Application to hydroformylation of styrene

The complexes [Rh(CO)(PPh₃){Ph₂PNP(O)Ph₂-P,O}] (3), [Rh(CO)₂{Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (5), and [Rh(CO)(PPh₃){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (6), were synthesised by stepwise reactions of CO and PPh₃ with [Rh(cod){Ph₂PNP(O)Ph₂-P,O}] (2) and [Rh(cod){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (4), respectively. The complexes 3, 5 and 6 have been studied by IR, as well as ¹H and ³¹P NMR spectroscopy. The ν(CO) bands of complexes 3 and 6 appear at approximately 1960 cm⁻¹, indicating high electron density at the Rh^I centre. The structure of complexes 3 and 6 has been determined by X-ray crystallography, and the ³¹P NMR chemical shifts have been resolved via low temperature NMR experiments. Both complexes exhibit square planar geometry around the metal centre, with the five-membered ring of complex 3 being almost planar, and the six-membered ring of complex 6 adopting a slightly distorted boat conformation. The C-O bond of the carbonyl ligand is relatively weak in both complexes, due to strong π-back donation from the electron rich Rh^I centre. The catalytic activity of the complexes 2, 3 and 6 in the hydroformylation of styrene has been investigated. Complexes 2 and 3 showed satisfactory catalytic properties, whereas complex 6 had effectively no catalytic activity.     

Synthetic, spectral and catalytic activity studies of ruthenium bipyridine and terpyridine complexes: Implications in the mechanism of the ruthenium(pyridine-2,6-bisoxazoline)(pyridine-2,6-dicarboxylate)-catalyzed asymmetric epoxidation of olefins utilizing H2O2

Various Ru(L₁)(L₂) (1) complexes (L₁ = 2,2′-bipyridines, 2,2′:6′,2″-terpyridines, 6-(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl-2,2′-bipyridinyl or 2,2′-bipyridinyl-6-carboxylate; L₂ = pyridine-2,6-dicarboxylate, pyridine-2-carboxylate or 2,2′-bipyridinyl-6-carboxylate) have been synthesized (or in situ generated) and tested on epoxidation of olefins utilizing 30% aqueous H₂O₂. The complexes containing pyridine-2,6-dicarboxylate show extraordinarily high catalytic activity. Based on the stereoselective performance of chiral ruthenium complexes containing non-racemic 2,2′-bipyridines including 6-[(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl]-[2,2′]bipyridinyl new insights on the reaction intermediates and reaction pathway of the ruthenium-catalyzed enantioselective epoxidation are proposed. In addition, a simplified protocol for epoxidation of olefins using urea hydrogen peroxide complex as oxidizing agent has been developed.     

Effects of solvent and base on the palladium-catalyzed amination: PdCl2(Ph3P)2/Ph3P-catalyzed selective arylation of primary anilines with aryl bromides

A readily accessible catalytic system, PdCl₂(Ph₃P)₂/Ph₃P, was developed for the selective arylation of primary anilines with aryl bromides. The strong influence of solvents and bases on the catalytic activity was observed. In refluxing o-xylene, triphenylphosphine shows high efficiency for Pd-catalyzed intermolecular amination reactions. By changing the bases, mono- and diarylation of primary amines could be selectively achieved in high yields. Moreover, the catalytic system showed good toleration for the steric hindrance of anilines. A series of N,N,N′,N′-tetraaryl-1,1′-biphenyl-4,4′-diamines, important intermediates of OLED hole transport materials, were synthesized facilely via coupling reactions between 4,4′-diaminobiphenyls and aryl bromides.     

New iminophosphorane-mediated synthesis of thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones and 5H-2,3-dithia-5,7-diaza-cyclopenta[c,d]indenes

Mono(iminophosphorane) 4 was selectively prepared from the reaction of 3,4-diaminothieno[2,3-b]thiophene 3 with excess triphenylphosphine, C₂Cl₆, and Et₃N due to intramolecular double hydrogen bond formation. Mono(iminophosphorane) 4 reacted with aromatic isocyanates to give stable carbodiimides 8, which were further treated with aliphatic secondary or primary amines to give 2-amino substituted thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones 10 or 12 in the presence of a catalytic amounts of EtO⁻Na⁺. However, in the presence of a catalytic amounts of potassium carbonate, the carbodiimides 8 were transformed into previously unreported 5H-2,3-dithia-5,7-diaza-cyclopenta[c,d]indenes 13 via direct cyclization in high yields. The reaction of carbodiimides 8 with phenols in the presence of a catalytic amounts of potassium carbonate gave a mixture of 2-aryloxy substituted thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones 14 and 13. X-ray structure analysis of 10m supported the structure and the proposed reactivity of amino group.     

C2-Symmetric bipyrrolidines as organocatalysts for asymmetric Diels-Alder reactions

A new class of C₂-symmetric 3,3′-dialkoxy-2,2′-bipyrrolidines have been designed and developed for asymmetric organocatalytic Diels-Alder reactions of α,β-unsaturated aldehydes. The bipyrrolidines combined with HClO₄ were found to be effective organocatalysts for enantioselective Diels-Alder reactions. The catalysis mode has been demonstrated by NMR and X-ray crystallographic studies for diiminium intermediate.     

Non-C2-symmetrical antimony-phosphorus ligand, (R/S)-2-diphenylphosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb): preparation and its use for asymmetric reactions as a chiral auxiliary

A new non-C₂-symmetrical antimony-phosphorous ligand, (±)-2-diphenyl-phosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb) 3, has been prepared from 2-bromo-2′-diphenylphosphano-1,1′-naphthyl 4 via its borane complex 6, and could be resolved by the separation of a mixture of the diastereomeric palladium complexes 8A and 8B derived from the reaction of (±)-3 with optically active palladium reagent (S)-7. The enantiomerically pure BINAPSb 3 has proved to be highly effective in the palladium-catalyzed asymmetric hydrosilylation of styrene as a chiral auxiliary.     

Chiral cyclopentadienyl ruthenium(II) complexes with P,P-ligands derived from (1R,2R)-1,2-diaminocyclohexane: Synthesis,crystal structures and catalytic activity in Diels–Alder reactions

Chiral cyclopentadienyl ruthenium(II) complexes [CpRu(L1–L3)Cl] (5–7) have been prepared by reaction of [CpRu(PPh₃)₂Cl] with chiral P,P-ligands (1R,2R)-1,2-bis(diphenylphosphinamino)cyclohexane (L1), N,N′-[bis-(3,3′-bis-tert-butyl-5,5′-bis-methoxy-1,1′-biphenyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L2) and N,N′-[bis-(R)-1,1′-binaphtyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L3). The molecular structures of 5 and 6 have been determined by single-crystal X-ray analysis. Studies on catalytic activity of the cations derived from (5–7) by treatment with AgSbF₆, are also reported.     

Enantioselective addition of diethylzinc to aromatic aldehydes catalyzed by Ti(IV) complexes of C2-symmetrical chiral BINOL derivatives

Enantioselective addition of diethylzinc to a series of aromatic aldehydes is developed using new chiral C₂-symmetric ligand (S)-2,2′-(1,1′-binaphthyl-2,2′-diylbis(oxy))bis(methylene)bis(4-nitrophenol) (S)-2b. The catalytic system employing 10 mol % of (S)-2b and 120 mol % of Ti(OiPr)₄ was found to promote the addition of diethylzinc to a wide range of aromatic aldehydes with electron-donating and electron-withdrawing substituents, giving up to 89% ee and up to 95% yield of the corresponding secondary alcohol under mild conditions.     

Asymmetric addition of phenylacetylene to aldehydes catalyzed by soluble optically active polybinaphthols ligand

A chiral polymer ligand was synthesized by the polymerization of (S)-5,5′-dibromo-6,6′-dibutyl-2,2′-binaphthol (S-M-1) with (S)-2,2′-bishexyloxy-1,1′-binaphthyl-6,6′-boronic acid (S-M-2) via Pd-catalyzed Suzuki reaction. The application of the chiral polymer ligand to the asymmetric addition of phenylethynyl zinc to various aldehydes has been studied. The results show that the soluble chiral polybinaphthols ligand in combination with Et₂Zn and Ti(OⁱPr)₄ can exhibit excellent enantioselectivity for phenylacetylene addition to both aromatic and aliphatic aldehydes. The catalytically active center of the repeating unit S-1 used as a catalyst produced the opposite configuration of the propargylic alcohols to that of S-1, on the contrary, the chiral polymer gave the same configuration as the optically active binaphthol moiety of the polybinaphthols ligand. Moreover, the chiral polymer ligand can be easily recovered and reused without loss of catalytic activity as well as enantioselectivity.     

Enantioselective synthesis of (2S,3′R,7′Z)-N-(3′-hydroxy-7′-tetradecenoyl)-homoserine lactone

A concise enantioselective total synthesis of (2S,3′R,7′Z)-N-(3′-hydroxy-7′-tetradecenoyl)-homoserine lactone is described. Key feature of this protocol is a catalytic asymmetric hydrogenation and a prophenol-zinc-catalyzed diazo addition to imine reaction as genesis of chirality. Moreover, flexibility is built in the synthesis to generate enantioenriched analogs using catalytic amount of enantioenriched C₂-symmetric ligands.     

Synthetic,structural and spectroscopic studies of complexes derived from the copper(II) perchlorate/fumaric acid/N,N′-chelates tertiary reaction systems

The synthetic investigation of the Cu(ClO₄)₂·6H₂O/fumaric acid (H₂fum)/N,N’-chelates (1,10-phen, 2,2′-bpy) tertiary reaction systems has yielded mononuclear, dinuclear and tetranuclear complexes, and three coordination polymers. The chemical and structural identity of the products depends on the solvent, the absence or presence of external hydroxides in the reaction mixtures and the N,N’-donor. Three fumarato(−2) complexes, i.e. compounds [Cu₂(fum)(phen)₄](ClO₄)₂·2H₂O (1·2H₂O), [Cu(fum)(phen)(H₂O)]_n (3) and [Cu₂(fum)(bpy)₂(H₂O)₂]_n(ClO₄)_2n (6), were isolated and structurally characterized, and four non-fumarato complexes, i.e. compounds [Cu₄(μ₃-ΟΗ)₂(μ₂-ΟΗ)₂(phen)₄(H₂O)₂](ClO₄)₄·2H₂O (2·2H₂O), [Cu(ClO₄)(phen) (MeCN)₂(H₂O)](ClO₄) (4), [Cu(ClO₄)(phen)(MeCN)₂]_n(ClO₄)_n (5) and [Cu(ClO₄)₂(bpy)(MeCN)₂] (7), were simultaneously obtained from the reaction systems investigated. The coordination versatility of the fumarato(−2) ligand is reflected to the three different coordination modes observed in 1·2H₂O, 3 and 6; the monodentate bridging μ₂-κO:κO′ mode in 3, the asymmetric chelating bridging μ₂-κO:κO′:κO′′:κO′′′ mode in 1·2H₂O and 3, and the syn,syn bridging μ₄-κO:κO′:κO′′:κO′′′ mode in 6. The crystal structures of the complexes are stabilized by intra- and inter-molecular hydrogen bonding and π–π stacking interactions leading to interesting supramolecular architectures. Characteristic IR bands of the complexes are discussed in terms of the known structures, and the coordination modes of the fum²⁻ ligands.     

A novel 2D vanadium(V)-isonicotinohydrazide coordination polymer, C15H16AgN4O8V: Synthesis, structure, catalytic activity and DFT calculation

A novel two-dimensional 3d-4d transition metal-based coordination polymer [VO(OCH₃)(OHCH₃)(L)Ag(NO₃)]_∞ (1) has been synthesized and characterized by single crystal X-ray diffraction and fluorescence spectroscopy (H₂L = (E)-N′-(2-hydroxybenzylidene)isonicotinohydrazide). The coordination sphere of each V center is octahedral and chelates to a tridentate ligand L, while the tetrahedral conformation of Ag center consists of two O and two N atoms. Infinite zigzag chains of Ag-tetrahedrals are formed. The hydrazinide L²⁻ ligands of octahedral-V centers link adjacent chains to form an undulated heterometal based 2D layer. DFT calculations on 1 reproduced the geometric parameters and the electronic absorptions were predicted. The coordination polymer 1 showed very selective heterogeneous catalytic activity with 77-89% conversion in oxidation of alkenes, cyclooctane and benzyl alcohol by H₂O₂.     

Mononuclear ruthenium(II) complexes bearing the (S,S)-Pr-pybox ligand

The complexes trans-[RuCl₂(L){(S,S)-ⁱPr-pybox}] ((S,S)-ⁱPr-pybox = 2,6-bis[4′-(S)-isopropyloxazolin-2′-yl]pyridine, L = PMe₃ (1), P(OMe)₃ (2), PPh₂(CH₂CHCH₂) (3), CNBn (5), CNCy (6) and MeCN (7)) have been synthesized by substitution of ethylene on the precursor trans-[RuCl₂(η²-C₂H₄){(S,S)-ⁱPr-pybox}]. This complex also reacts with cyclooctadiene (cod) or norbornadiene (nbd) and NaPF₆, in refluxing methanol, giving the coordination compounds [RuCl(η⁴-cod){(S,S)-ⁱPr-pybox}][PF₆] (8) and [RuCl(η⁴-nbd){(S,S)-ⁱPr-pybox}][PF₆] (9). The structures of complexes [RuCl(CO)(PPh₃)(H-pybox)][BF₄] (H-pybox = 2,6-bis(dihydrooxazolin-2′-yl)pyridine) (4), 6 and 8, have been resolved by X-ray diffraction methods. The catalytic activity of the new complexes in transfer hydrogenation of acetophenone has also been examined.     

Catalytic efficacy of Schiff-base copper(II) complexes: Synthesis,X-ray structure and olefin oxidation

Three copper(II) Schiff-base complexes, [Cu(L¹)(H₂O)](ClO₄) (1), [Cu(L²)] (2) and [Cu(L³)] (3) have been synthesized and characterized [where HL¹ = 1-(N-ortho-hydroxy-acetophenimine)-2-methyl-pyridine], H₂L² = N,N′-(2-hydroxy-propane-1,3-diyl)-bis-salicylideneimine and H₂L³ = N,N′-(2,2-dimethyl-propane-1,3-diyl)-bis-salicylideneimine]. The structure of complex 1 has been determined by single crystal X-ray diffraction analysis. In complex 1, the copper(II) ion is coordinated to one oxygen atom and two nitrogen atoms of the tridentate Schiff-base ligand, HL¹. The fourth coordination site of the central metal ion is occupied by the oxygen atom from a water molecule. All the complexes exhibit high catalytic activity in the oxidation reactions of a variety of olefins with tert-butyl-hydroperoxide in acetonitrile. The catalytic efficacy of the copper(II) complexes towards olefin oxidation reactions has been studied in different solvent media.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

Novel chiral C1-1′,2′,3′,4′-tetrahydro-1,1′-bisisoquinolines: synthesis, resolution, and applications in catalytic enantioselective reactions

A straightforward synthesis of a structurally constrained C₁-1′,2′,3′,4′-tetrahydro-1,1′-bisisoquinoline 1 is described. Resolution of this compound has been achieved successfully. The preparation of chiral N-alkyl, urea, and thiourea derivatives as potential new chiral ligands, based on the parent compound 1, is reported. Chiral compound 1 induced very good selectivity and yield in the addition of either Et₂Zn (85% ee, 96% yield) or nitromethane (85% ee, 60% yield) to benzaldehyde.     

Kinetics and mechanistic studies of the interaction of thiosulfate with cis-diaqua-bis[1-alkyl-2-(arylazo)imidazole]ruthenium(II) complexes

The nucleophilic substitution reaction of S₂O₃²⁻ with [Ru(HaaiR′)₂(OH₂)₂](ClO₄)₂ (1) [HaaiR′ = 1-alkyl-2-(phenylazo)imidazole] and [Ru(ClaaiR′)₂(OH₂)₂](ClO₄)₂ (2) [ClaaiR′ = 1-alkyl-2-(chlorophenylazo)imidazole] [where R′ = Me(a), Et(b) or Bz(c)] in acetonitrile–water (50% v/v) medium to yield Na₂[Ru(HaaiR′)₂(S₂O₃)₂] (3a, 3b or 3c) and Na₂[Ru(ClaaiR′)₂(S₂O₃)₂] (4a, 4b or 4c) has been studied. The products were characterized by microanalytical data and spectroscopic techniques (UV–Vis, NMR and mass spectroscopy). The reaction proceeds in two consecutive steps (A → B → C); each step follows first order kinetics with respect to each complex and S₂O₃²⁻, and the first step second order rate constant (k′₂) is greater than the second step one (k″₂). An increase in the π-acidity of the ligand increases the rate. Thermodynamic parameters, the standard enthalpy of activation (Δ^‡H⁰) and the standard entropy of activation (Δ^‡S⁰), have been calculated for both steps using the Eyring equation from variable temperature kinetic studies. The low Δ^‡H⁰ and large negative Δ^‡S⁰ values indicate an associative mode of activation for both aqua ligand substitution processes.     

Structural, microstructural and surface properties of a specific CeO2-Bi2O3 multiphase system obtained at 600 °C

Polycrystalline samples of (1−x) CeO₂−x/2 Bi₂O₃ phases, where x is the atom fraction of bismuth have been synthesized by the precipitation process and after the thermal treatment at 600 °C, under air. Samples are first characterized by the X-ray diffraction and scanning electron microscopy. To determine the samples specific surface areas, Brunauer-Emmett-Teller (BET) analyses have been performed. In the composition range 0≤x≤0.20, a cubic solid solution with fluorite structure is obtained. For compositions x comprised between 0.30 and 0.90, two types of T′ (or β′) and T (or β) tetragonal phases, similar to the well-known β′ or β Bi₂O₃ metastable structural varieties, are observed. However, the crystal cell volumes of these β′ or β Bi₂O₃ phases increase with the composition x in bismuth: this might be due to the presence of defects or substitution by cerium atoms, in the tetragonal lattices. Using X-ray diffraction profile analyses, correlations between bismuth composition x and crystal sizes or lattice distortions have been established. The solid-gas interactions between these polycrystalline materials and air-CH₄ and air-CO flows have been studied as a function of temperature and composition x, using Fourier transform infrared (FTIR) analyses of the conversions of CH₄ and CO gases into the CO₂ gas. The transformations of CH₄ and CO molecules as a function of time and temperature are determined through the intensities of FTIR CO₂ absorption bands. Using the specific surface areas determined from BET analyses, these FTIR intensities have been normalized and compared. For all bismuth compositions, a low catalytic reactivity is observed with air-CH₄ gas flows, while, for the highest bismuth compositions, a high catalytic reactivity is observed with air-CO gas flows.