Effects of substituent and solvent on the Sonogashira coupling reaction of β-bromoporphyrin

A series of experiments were designed to understand the effects of substituent and solvent on the Sonogashira coupling reaction of β-bromoporphyrin using a Pd₂(dba)₃/AsPh₃ system as the catalyst. Electron-efficient groups and aprotic solvents are conducive to the reaction. A possible explanation was given. A new family of β-pyrrole substituted porphyrins was also synthesized during the study.     

A one-pot reaction of (chlorocarbonyl) phenyl ketene with β-ketoamides and thiochromen-2-one

Readily available (chlorocarbonyl)phenyl ketene and a varied set of β-ketoamides were reacted in a one-step procedure to produce 2-pyrone derivatives. β-Ketoamide derivatives are versatile intermediates for the synthesis of heterocyclic compounds. For instance, 1-morpholino-3-phenyl-1,3-propanedione, 1-phenyl-3-piperidino-1,3-propanedione, 1-phenyl-3-pyrrolidino-1,3-propanedione, 1-piperidino-1,3-butanedione, 1-morpholino-2-phenyl ethanone were used in these reactions to produce 2-pyrone derivatives. In addition, the preparation of 4-hydroxy-3-phenylthiochromeno[4,3-b]pyran-2,5-dione derivatives and 4-hydroxy-7-methyl-3-phenyl pyrano[3,2-c]chromeno-2,5-dione were described. For the synthesis of these compounds 4-hydroxy-2H-thiochromen-2-ones and 4-hydroxy-8-methyl-2H-chromen-2-one were reacted with (chlorocarbonyl)phenyl ketene and the final products were isolated in good yields.     

Regio- and stereoselective SN2′ reaction of an allylic picolinate in the synthesis of LY426965

Allylic substitution of secondary γ,γ-disubstituted allylic picolinates with ArMgBr-based copper reagents was applied to the synthesis of LY426965. Reduction of (R)-6-(PMB-oxy)-3-hexyn-2-ol of 93% ee (PMB?=?p-MeOC₆H₄CH₂) using Red-Al gave (R,Z)-4-iodo-5-(PMB-oxy)hex-3-en-2-ol, which was later converted to the Me-substituted allylic picolinate by Pd-catalyzed coupling with MeZnI followed by esterification with picolinic acid. Allylic substitution with PhMgBr/Cu(acac)₂ proceeded with high anti S_N2′ selectivity (99%). Ozonolysis, addition of c-Hex-MgBr to the resulting aldehyde, and reductive amination with the piperazine derivative afforded LY426965.     

Remote stereocontrol by the sulfinyl group. Diels–Alder reaction of cyclopentadiene with substituted (S)-[2-(p-tolylsulfinyl)styrenes and (S)-[2-(p-tolylsulfinyl)phenyl] vinyl ketones

The ability of a homochiral sulfinyl group at the dienophile to act as a remote stereocontrol inductor in the Diels–Alder reaction with cyclopentadiene has been evaluated. High pressure conditions were required for the reactions of (S)-2-(p-tolylsulfinyl)styrenes 3–5 (E-1,2-disubstituted double bond) and 6–8 (1,1-disubstituted double bond). A good facial selectivity and total endo selectivity were attained with 1,1-disubstitued dienophiles, though the 1,2-disubstituted ones afforded poorer results. In contrast, (S)-[2-(p-tolylsulfinyl)phenyl] vinyl ketones 9–11 reacted readily at low temperature (?40 °C) with complete endo selectivity and high facial selectivity in the presence of Yb(OTf)₃ as a chelating reagent of sulfinyl and carbonyl oxygen atoms. Concerning furan reactions, β-trifluoromethyl enone 14 afforded Diels–Alder adducts with high facial selectivity in the presence of the Lewis acid, but β-non-substituted enones 9 and 12 yielded products of furan conjugate addition to the double bond.     

A comparison between the reaction of P2Ph4 with [{Co2(CO)6}2(μ-η:μ-η-HOCH2CCCCCH2OH)] and the reaction of [Co2(μ-PPh2)2(CO)6] with HOCH2CCCCCH2OH

Reaction of P₂Ph₄ with the diyne-diol complex [{Co₂(CO)₆}₂(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] in toluene at 65 °C gives [{Co₂(μ-P₂Ph₄)(CO)₄}{Co₂(CO)₆}(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] (1). Thermolysis of 1 at 95 °C leads to [{Co₂(CO)₅}₂(μ-P₂Ph₄)(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)](2) and (μ₂-PPh₂)(μ₂-CO)(CO)₇] (3). The structures of 1-3 have been established by X-ray crystallography. In 1, a pseudoequatorial P₂Ph₄ ligand bridges the cobalt-cobalt bond of a Co₂(CC)(CO)₄ unit. By contrast, in isomeric 2, a pseudoaxial P₂Ph₄ ligand spans two Co₂(CC)(CO)₅ units, a new coordination mode for [{Co₂(CO)₅L}₂(μ-η²:μ-η²-diyne)] complexes. Complex 3 arises from dehydration-cyclocarbonylation of the diyne-diol in 1 to give a 2(5H)-furanone, a process that has not been previously reported. Reaction of HOCH₂CCCCCH₂OH with [Co₂(μ-PPh₂)₂(CO)₆] at 80 °C in toluene gave [Co₃(μ-PPh₂)₃(CO)₆], [Co₂(CO)₆(μ-η²-HOCH₂CCCCCH₂OH)] and [Co₂{μ-η⁴-PPh₂C(CCCH₂OH)C(CH₂OH)CO}(μ-PPh₂)(CO)₄] (4). The regiochemistry of 4 was confirmed by X-ray crystallography.     

Investigations in the region of 2,3′-biquinolyl 5. Investigation of the reaction of stabilized C-nucleophiles with 1-alkyl-3-(2-quinolyl)-quinolinium halides

The regioselectivity of the nucleophilic addition of stabilized C-nucleophiles to 1-alkyl-3-(2-quinolyl)quinolinium halides was investigated. The reaction of the latter with enolates, indolesodium, and cyanide ion leads to 4-substituted 1-alkyl-1, 4-dihydro-2,3-biquinolyls.For communication 4, see [1].Stravropol State University, Stavropol 355009, Russia. Russian Chemical Technology University 125190, Moscow. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1218–1222, September, 1998.     

Synthesis of vinylcyclopropanes via palladium-catalyzed coupling of cyclopropylzinc halides with vinyl iodides. Total syntheses of (±) -prezizanol and (±)-prezizaene

Palladium(O)-catalyzed coupling of cyclopropylzinc halides, readily prepared from the corresponding cyclopropyl (tri-$\text{n}$-butyl)stannanes, with vinyl iodides provides good yields of functionalized vinylcyclopropanes. The coupling reaction is used as a key step in total syntheses of the sesquiterpenoids (±)-prezizanol and (±)-prezizaene.     

Electron-withdrawing effect of α-substituents in acyl nitrates on the polarization of the O–NO2 bond

1. Download high-res image (94KB)
2. Download full-size image

     

The Effects of Structure on Gene Delivery with Linear β- and γ-Cyclodextrin-Containing Polycations

Cyclodextrin (CD)-containing polycations are prepared bycopolymerization of3^A3^B-dideoxy-3^A,3^B-diamino-- and -CDs with dimethyl suberimidate·2HCl to yieldpolyamidine products. Both alkyl- and alkoxy-diamines are used to vary the spacing between the CDand the amidine charge centers. It is found that the transfection efficiency andtoxicity of such polycations is dramatically affected by the structure of the spacer separatingthe CD ring from the charge centers and less so by the type of CD used.     

Study on the reaction of triple helix poly(A:2I) with Cu~(2+)

The effect of Cu2+ on the triple-stranded helical structure of poly(A:2I) was studied by means of circular dichroism spectral method with the help of ultraviolet spectral and ethidium bromide fluorescence probe methods. It was found that Cu2+ destabilizes the structure of the triple helix poly(A:2I) and induces its structural transformations, meanwhile, the transformations can be partially reversed by a higher NaCl concentration. The structural transformations may be expressed by the following scheme: poly(A:2I) - poly(A:I) + poly(I)- poly(A) + 2poly(I)     

Substituent Effects on the Driving Force for Inclusion Complexation of α- and β-Cyclodextrin with Monosubstituted Benzene Derivatives

The association constant values, K_a, for the inclusion of - and -CD with monosubstituted benzene derivatives were determined by means of UV-vis and fluorescence spectroscopy. The stability of the complexes is influenced by the properties of the substituents of the guest compounds. Regression analysis was used to create a set of inclusion models with the experimental association constant ln K_a and the corresponding substituent molar refraction R_m, hydrophobic constant and Hammett constant of the benzene derivatives. The ln K_a value mainly correlated with R_m for -CD and with both R_m and for -CD complexes. The association constants predicted by the models are in good agreement with the experimentally determined data. This suggests that the inclusion complexation of benzene derivatives with -CD is predominantly driven by van der Waals force and with -CD mainly by van der Waals force and hydrophobic interactions.     

Microwave-assisted α-halogenation of 2-methylquinolines with tetrabutylammonium iodide and 1,2-dichloroethane (1,2-dibromoethane)

A simple and efficient methodology permitting the halogenation of 2-methylquinolines into 2-(chloromethyl)quinolines or 2-(bromomethyl)quinolines in the tetrabutylammonium iodide and 1,2-dichloroethane (1,2-dibromoethane) system has been developed for the first time. The halogenation can be rapidly completed with good to excellent yields and high selectivity under microwave irradiation.     

Structure and thermal properties of volatile copper(II) complexes with β-diimine derivatives of acetylacetone and the structure of 2-(methylamino)-4-(methylimino)-pentene-2 crystals

Copper(II) chelates with β-diimine derivatives of acetylacetone that have a general formula of Cu(R¹C(NR²)CHC(NR²)R¹)₂, where R¹, R² are alkyl substituents, are synthesized. The complexes were identified using elemental analysis, melting point measurements, and high-temperature mass spectrometry data. Knudsen technique is employed to determine the vapor pressure temperature dependence, and standard thermodynamic parameters of sublimation ΔH _T ⁰ and ΔS _T ⁰ are derived. A single crystal X-ray diffraction study is carried out for copper(II) complexes of Cu(CH₃-C(NCH₃)-CH-C(NCH³)-CH₃)₂ (a = 10.363(1) Å, b = 11.978(1) Å, c = 12.653(1) Å, V = 1570.6(3) ų, space group Pnc2, Z = 4, d _calc = 1.328 g/cm³, R = 0.027), Cu(CH₃-C(NC₂H₅)-CH-C(NC₂H₅)-CH₃)₂ (a = 11.782(4) Å, b = 13.951(8) Å, c = 25.591(8) Å, V = 4206(3) ų, space group C222¹, Z = 8, d _calc = 1.169 g/cm³, R = 0.10), and also 2-(methylamino)-4-(methylimino)-pentene-2 CH₃-(C=(NCH₃))-CH=(C-(NHCH₃))-CH₃ (a = 12.129(2) Å, b = 12.034(2) Å, c = 5.692(1) Å, β = 107.05(3)°, V = 794.3(3) ų, space group Cc, Z = 4, d _calc = 1.055 g/cm³, R = 0.06). Van der Waals lattice energy E _cryst is calculated for the cooper(II) complexes by the atom-atom potential technique. The calculated values are compared to experimental sublimation enthalpies Δ H _T ⁰ .     

The preparation and chemistry of (r)-(1-naphthyl)phenylmethylsilylmethyllithium: stereochemistry at silicon in the elimination of β-hydroxysilanes.

(R)-(1-naphthyl)phenylmethylsilylmethyllithium has been prepared from 1-naphthylphenylmethyl-silylmethyltri-n-butyltin, which is in turn prepared in four steps from (R)-(1-naphthyl)phenylmethylsilane. The title lithium reagent was reacted with benzaldehyde, pivaldehyde, acrolein and 2-methylcyclohexanone to produce the corresponding β-hydroxysilanes in good yield, but with only a 3–4% diastereomeric excess. Unfortunately, these diastereomers proved impossible to separate. Model studies employing the methyldiphenylsilyl group showed that these β-hydroxysilanes could be protiodesilylated to give the corresponding methyl alcohol. The products from the adduct with pivaldehyde and acrolein were used to investigate the stereochemistry at silicon of the β-elimination of the β-hydroxysilanes. This was found to occur with inversion of configuration at silicon when the elimination is carried out with boron fluoride etherate, sulfuric acid or acetic acid/sodium acetate, but with retention of configuration when carried out with potassium hydride.     

A comparison study on Raman scattering properties of α- and β-MnO2

In this comment to a recent paper [Anal. Chim. Acta 585 (2007) 241-245], we report a comparison study on Mn oxide-related compounds with different crystallographic forms, which distinguish between β-MnO₂ and α-MnO₂ type materials via Raman scattering (RS) spectroscopy. The tetragonal rutile-type β-MnO₂ is characterized by a RS band at ∼667 cm⁻¹ of symmetry A_1g, whereas the α-MnO₂ type materials feature two main RS contributions at about 574 and 634 cm⁻¹, belonging to A_g spectroscopic species of a tetragonal hollandite-type framework. These data represent a clear signature for identifying β-MnO₂ and α-MnO₂ type materials via RS spectroscopy.