Synthesis of 48 disaccharide building blocks for the assembly of a heparin and heparan sulfate oligosaccharide library

[Structure: see text] An efficient synthesis of the entire set of suitably protected 48 disaccharide building blocks for the assembly of a heparin and heparan sulfate oligosaccharide library is described here.     

Synthesis of a S-linked heparan sulfate trisaccharide as the substrate mimic of heparanase

An approach to the construction of the β-(1→4)-S-linkage between a glucuronic and a glucosamine unit, and then to the synthesis of a heparan sulfate trisaccharide containing such a linkage (1) as a nonhydrolyzable substrate mimic of heparanase was developed.     

De novo synthesis of uronic acid building blocks for assembly of heparin oligosaccharides

An efficient de novo synthesis of uronic acid building blocks is described. The synthetic strategy relies on the stereoselective elongation of thioacetal protected dialdehydes 12 a and 17. The dialdehydes are prepared from D-xylose, a cheap and commercially available source. A highly stereoselective MgBr(2)OEt(2)-mediated Mukaiyama aldol addition to C4-aldehyde 12 a is performed to obtain D-glucuronic acid building block 16, whereas L-iduronic acid building block 22 is prepared by MgBr(2)OEt(2)-mediated cyanation of C5-aldehyde 17. Synthesis of a heparin disaccharide demonstrates the utility of the de novo strategy for the assembly of glycosaminoglycan oligosaccharides.     

Toward the modular synthesis of glycosaminoglycans: synthesis of hyaluronic acid disaccharide building blocks using a periodic acid oxidation

The synthesis of two differentially protected GluNAc-β(1→4)-GluA and GluA-β(1→3)-GluNAc disaccharide modules for the solid-phase assembly of hyaluronic acid are described. A periodic acid/chromium trioxide oxidation was the key transformation to facilitate access to the glucuronic acid moiety from glucose and should find wide application in the oxidation of primary alcohols.     

Advances in the separation,sensitive detection,and characterization of heparin and heparan sulfate

Elucidation of the relationship between the structure and biological function of the glycosaminoglycans (GAGs) heparin and heparan sulfate (HS) presents an important analytical challenge mainly due to the difficulty in determining their fine structure. Heparin and HS are responsible for mediation of a wide range of biological actions through specific binding to a variety of proteins including those involved in blood coagulation, cell proliferation, differentiation and adhesion, and host–pathogen interactions. Therefore, there is a growing interest in characterizing the microstructure of heparin and HS and in elucidating the molecular level details of their interaction with peptides and proteins. This review discusses recent developments in the analytical methods used for sensitive separation, detection, and structural characterization of heparin and HS. A brief discussion of the analysis of contaminants in pharmaceutical heparin is also presented.     

PhBCl2 promoted reductive opening of 2,4-O-p-methoxybenzylidene: new regioselective differentiation of position 2 and 4 of α-l-iduronyl moieties in disaccharide building blocks

We describe a new protocol for the challenging differentiation of the position 2^′ and 4^′ of l-iduronyl moieties located at the nonreducing end of various disaccharide building blocks. This methodology is based on the introduction of a 2^′,4^′-O-p-methoxybenzylidene group, followed by a totally regioselective reductive opening of this acetal by the PhBCl₂/Et₃SiH reagent system. l-Iduronyl moieties protected by a 4^′-O-p-methoxybenzyl group were thus obtained regioselectively and efficiently.     

Synthesis of the putative minimal FGF binding motif heparan sulfate trisaccharides by an orthogonal protecting group strategy

The synthesis of two trisaccharides, the putative minimal heparan sulfate sequences responsible for binding to acidic and basic fibroblast growth factors, respectively, is described from a common protected intermediate using an orthogonal protecting group strategy.     

Synthetic Approach Toward the Partial Sequences of Betaglycan in the Linkage Region on Solid Support and in Solution Phase

We have synthesized, for the first time, the partial sequence of the betaglycan composed of the tetraosyl hexapeptide, which was directly usable as a probe for enzymatic glycosyl transfer. Stepwise elongation afforded the corresponding tetraosyl trichloroacetimidate. The common glycosyl dipeptide:[β‐d‐GlcA‐(1→3)‐β‐d‐Gal‐(1→3)‐β‐d‐Gal‐(1→4)‐β‐d‐Xyl‐(1→O)‐Ser‐Gly] was synthesized by glycosylation of the corresponding tetraosyl trichloroacetimidate and Ser‐Gly moiety. The glycosyl dipeptide was coupled with other core peptide parts in solution phase and on a solid support. These glycosyl hexapeptides were then transformed into the desired target compounds.     

Insights into the mechanism of separation of heparin and heparan sulfate disaccharides by reverse-phase ion-pair chromatography

Reverse-phase ion-pair high performance liquid chromatography (RPIP-HPLC) and ultra-performance liquid chromatography (RPIP-UPLC) are increasingly popular chromatographic techniques for the separation of organic compounds. However, the fine details of the RPIP separation mechanism are still being debated. Many factors including type and concentration of the ion-pairing reagent, mobile phase pH, organic modifier, ionic strength, and stationary phase all play a role in the overall efficiency and optimization of ion-pairing separations. This study investigates the role that competition between ion-pairing reagents with different steric bulk and hydrophobicity plays in the separation of structural isomers of heparin and heparan sulfate (HS) disaccharides. In addition to providing insights into the mechanism by which RPIP-HPLC can resolve closely related disaccharides, the use of competition between ion-pairing agents could lead to new methods for the separation of larger heparin and HS oligosaccharides. This approach should also be applicable to the analysis of other compound classes, and could lead to a general approach for the chromatographic resolution of mixtures of charged analytes having similar structures.     

From D-glucose to biologically potent L-hexose derivatives: synthesis of alpha-L-iduronidase fluorogenic detector and the disaccharide moieties of bleomycin A2 and heparan sulfate

A novel and convenient route for the synthesis of biologically potent and rare L-hexose derivatives from D-glucose is described. Conversion of diacetone-alpha-D-glucose (14) into 1,2:3,5-di-O-isopropylidene-beta-L-idofuranose (19) was efficiently carried out in two steps. Orthogonal isopropylidene rearrangement of compound 19 led to 1,2:5,6-di-O-isopropylidene-beta-L-idofuranose (27), which underwent regioselective epimerization at the C3 position to give the L-talo- and 3-functionalized L-idofuranosyl derivatives. Hydrolysis of compound 19 under acidic conditions furnished 1,6-anhydro-beta-L-idopyranose (35) in excellent yield, which was successfully transformed into the corresponding L-allo, L-altro, L-gulo, and L-ido derivatives via regioselective benzylation, benzoylation, triflation and nucleophilic substitution as the key steps. Applications of these 1,6-anhydro-beta-L-hexopyranoses as valuable building blocks to the syntheses of 4-methylcoumarin-7-yl-alpha-L-iduronic acid and the disaccharide moieties of bleomycin A(2) as well as heparan sulfate are highlighted.     

Synthesis of glucuronic acid derivatives via the efficient and selective removal of a C6 methyl group

This investigation is related to the development of a general strategy for the synthesis of certain glucuronic acid derivatives. In particular, we report exceptionally selective conditions for removing the C6 methyl protecting group by potassium hydroxide without affecting the benzoyl protecting groups on the C2, C3 and C4 hydroxyl groups in high yields (95–99%). The present method proves to be efficient and environmentally friendly in terms of short reaction time, high yield and the single product.     

An efficient and facile approach for the construction of chondroitin sulfate E oligosaccharide precursors

A facile and efficient approach has been developed for the construction of CS-E oligosaccharide precursors. In this approach, a disaccharide unit was first elongated to tetra- and hexasaccharides, followed by the introduction of anomeric groups via glycosylation couplings.     

Readily available amino acid building blocks for the synthesis of phosphole-containing peptides

Nucleophilic substitution of a phospholide anion onto protected 3-iodoalanine leads to the formation of an amino acid with an appended phosphole in excellent yield. Manipulation of the protecting groups, leads to building blocks suitable for the synthesis of phosphole-containing polypeptides.     

Response behavior of sodium-selective electrodes modified by surface attachment of the anticoagulant polysaccharides heparin and chondroitin sulfate

Two different polysaccharides with anticoagulant activities, heparin and chondroitin sulfate, were used to modify the surface of sodium-selective electrodes based on asymmetric cellulose triacetate (CTA) membranes. The membranes were formulated with sodium ionophore X, anionic additive, and o-nitrophenyl octyl ether. The response behavior of the surface-modified sodium electrodes was compared with that of control CTA, as well as poly(vinyl chloride) (PVC)-based sodium-selective electrodes. It was found that the selectivity coefficients obtained with the surface modified CTA membrane electrodes were slightly higher than those of the control, but in the case of heparin-modified electrodes they still met the requirements for analysis of sodium in physiological fluids within an error of <1%; the corresponding error for chondroitin sulfate-modified electrodes was also <1% except for the case of potassium ion in which the error was 1.3%. Likewise, it was found that other response characteristics, such as detection limit, linear range, slope of the response plot, selectivity pattern, and response time were comparable in both the control and the polysaccharide-modified electrodes. Therefore, the surface modification does not significantly alter the response behavior of the sensors.     

Methyl esters: an alternative protecting group for the synthesis of O-glycosyl amino acid building blocks

The glycosyl amino acids α-GalNAc-Ser and α-GalNAc-Thr are fundamental building blocks for glycopeptide synthesis, Schmidt’s synthesis method often being chosen for this purpose. Methyl esters used as orthogonal carboxylic acid protecting group in this procedure were found to be an efficient and inexpensive alternative to other groups. The mild selective methyl ester deprotection by LiI improved the efficiency of the synthesis method.     

Novel photochromic macrocycles composed of thiophene and ethylene building blocks: synthesis, structure, and photochromic property

Two novel photochromic macrocycles composed of thiophene and ethylene building blocks have been synthesized, and their crystal structure and photochromic properties are described. Macrocycle 2 shows good photochromic properties.     

One-pot synthesis of various xanthene derivatives using ionic liquid 1, 3-disulfonic acid imidazolium hydrogen sulfate as an efficient and reusable catalyst under solvent-free conditions

In this study, 1,3-disulfonic acid imidazolium hydrogen sulfate （DSIMHS） is used as an efficient and reusable ionic liquid for the green, mild, and efficient synthesis of xanthenes under solvent-free conditions. Simple and easy work-up, low cost, green process, short reaction times and excellent yields of the products are the advantages of this procedure. Further, the catalyst can be recycled and reused at least for four times without a noticeably decrease in its catalytic activity.     

An efficient route for the synthesis of hyperbranched polymers and dendritic building blocks based on urea linkages

A highly efficient synthetic route, based on the quantitative reaction between amine and isocyanate functionalities, was used successfully for the synthesis of hyperbranched polymers and dendritic building blocks based on urea linkages. The thermal decomposition of 3,5‐diamino benzoyl azide or 5‐amino isophthaloyl azide generated in situ the corresponding phenyl isocyanates, which were then polymerized to give wholly aromatic hyperbranched polyureas. Hyperbranched polyurea with amine chain ends was soluble in common organic solvents. The degree of branching, as calculated with ¹H NMR, was 0.55. Diethyl 5‐amino isophthalate and Boc‐protected 5‐amino isophthaloyl azide were used for the successful stepwise synthesis of dendritic wedges based on urea linkages. The thermal generation of the isocyanate functionality with gaseous nitrogen as the side product and its quantitative reaction with amine groups were the salient features of this convergent synthesis. This eliminated the use of chromatographic purification, an inherent part of other convergent growth approaches, and made it a very efficient synthetic route for the synthesis of dendritic wedges. The products were characterized by ¹H NMR, ¹³C NMR, and electron spray mass spectroscopy (ESMS) techniques. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1295–1304, 2001     

Efficient formation of novel and versatile building blocks from mucohalic acids: new substitute for tetronic acid and γ-alkylidenebutenolide

Novel and useful building blocks were synthesized efficiently by DABCO mediated highly selective dehalogenation of Knoevenagel aldol adducts of mucochloric acid and mucobromic acid. These new compounds were found to undergo palladium catalyzed C-C bond forming reactions (Suzuki and Sonogashira cross-coupling) in high yields.