Highly selective and sensitive fluorescence turn-on probe for proline

A weakly fluorescent coumarinyl aldehyde was transformed into a strongly fluorescent aldol product by a catalytic amount of proline. The aldehyde probe has shown a highly selective fluorescence turn-on response toward proline over other amino acids with micromolar sensitivity.     

A toxicity view of the pesticide picloram when immobilized onto a silica gel surface

The pesticide picloram (4-amino-3,5,6-trichloropicolinic acid) was anchored onto silica gel to yield a new surface. Isothermal microcalorimetry was applied to study the toxic effects caused to microbial activity of a typical Brazilian agricultural soil by application of free and immobilized picloram. The activity of the microorganisms in 1.50 g of soil sample was stimulated by addition of 6.0 mg of glucose plus 6.0 mg of ammonium sulfate under 34.8% controlled humidity at 298.15±0.02 K. The activity was recorded through power–time curves for increasing amounts of the active principle, varying from zero to 10.00 g g^–1. The increasing amounts of picloram, either free or immobilized, caused a decrease of the original thermal effect. The calorimetric data showed that the anchored pesticide presented a much lower toxic effect than the free picloram on the microbial activity.     

Determination of picloram in natural waters employing sequential injection square wave voltammetry using the hanging mercury drop electrode

This paper describes the development of a sequential injection analysis method to automate the determination of picloram by square wave voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. To perform these tasks, an 800 μL monosegment is formed, composed by 400 μL of sample and 400 μL of conditioning/standard solution, in medium of 0.10 mol L⁻¹ H₂SO₄. Homogenization of the monosegment is achieved by three flow reversals. After homogenization the mixture zone is injected toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode, at a flow rate of 50 μL s⁻¹. After a suitable delay time, the potential is scanned from −0.5 to −1.0 V versus Ag/AgCl at frequency of 300 Hz and pulse height of 25 mV. The linear dynamic range is observed for picloram concentrations between 0.10 and 2.50 mg L⁻¹ fitting to the linear equation I_p = (−2.19 ± 0.03)C_picloram + (0.096 ± 0.039), with R² = 0.9996, for which the slope is given in μA L mg⁻¹. The detection and quantification limits are 0.036 and 0.12 mg L⁻¹, respectively. The sampling frequency is 37 h⁻¹ when the standard addition protocol is followed, but can be increased to 41 h⁻¹ if the protocol to obtain in-line external calibration curve is used for quantification. The method was applied for determination of picloram in spiked water samples and the accuracy was evaluated by comparison with high performance liquid chromatography using molecular absorption at 220 nm for detection. No evidences of statistically significant differences between the two methods were observed.     

Highly sensitive biomolecular fluorescence detection using nanoscale ZnO platforms

Fluorescence detection is currently one of the most widely used methods in the areas of basic biological research, biotechnology, cellular imaging, medical testing, and drug discovery. Using model protein and nucleic acid systems, we demonstrate that engineered nanoscale zinc oxide structures can significantly enhance the detection capability of biomolecular fluorescence. Without any chemical or biological amplification processes, nanoscale zinc oxide platforms enabled increased fluorescence detection of these biomolecules when compared to other commonly used substrates such as glass, quartz, polymer, and silicon. The use of zinc oxide nanorods as fluorescence enhancing substrates in our biomolecular detection permitted sub-picomolar and attomolar detection sensitivity of proteins and DNA, respectively, when using a conventional fluorescence microscope. This ultrasensitive detection was due to the presence of ZnO nanomaterials which contributed greatly to the increased signal-to-noise ratio of biomolecular fluorescence. We also demonstrate the easy integration potential of zinc oxide nanorods into periodically patterned nanoplatforms which, in turn, will promote the assembly and fabrication of these materials into multiplexed, high-throughput, optical sensor arrays. These zinc oxide nanoplatforms will be extremely beneficial in accomplishing highly sensitive and specific detection of biological samples involving nucleic acids, proteins and cells, particularly under detection environments involving extremely small sample volumes of ultratrace-level concentrations.     

Highly sensitive fluorescence detection with Hg-lamp and photon counter in microchip capillary electrophoresis

A microchip capillary electrophoresis system with highly sensitive fluorescence detection is reported. The system was successfully constructed using an inverted fluorescence microscope, a highly sensitive photon counter, a photomultiplier tube (PMT) and a capillary electrophoresis microchip. This system can be applied to the fluorescence detection with various wavelengths (300-600 nm). Different fluorescence reagents require different excitation wavelengths. The wavelengths of UV light (300-385 nm), blue light (450-480 nm) and green light (530-550 nm) are employed to excite Titan yellow, fluorescence-5-isothiocyanate (FITC) and Rhodamine 6G, respectively. The detection limit (S/N = 3) of FITC is 7 × 10⁻¹⁰ M, which is 2-3 orders of magnitude lower than that obtained with the lamp-based fluorescence and PMT detection system and approaches the data gained by the laser-induced fluorescence detection. The linear relationship is excellent within the range of concentration 1.3 × 10⁻⁹ to 6.5 × 10⁻⁸ M FITC. It offers a new method to widen the application of the lamp-based fluorescence detection.     

Highly sensitive fluorescence quantification of irinotecan in biological fluids with the aid of second-order advantage

<正>A rapid,green and highly sensitive excitation-emission matrix(EEM) fluorescence method was proposed for analysis of irinotecan(CPT-11) in biological fluids including human plasma and urine samples of uncalibrated interferences with the aid of second-order advantage.Due to the serious spectral overlapping from biological matrices,the parallel factor analysis(PARAFAC) and the alternating normalization-weighted error(ANWE) have been recommended to perform directly calibration and overcome the problem which makes the traditional fluorospectrophotometer in trouble.Satisfactory results can be achieved.Furthermore, performance of the proposed method was evaluated based on figures of merit and some statistical parameters.The accuracy of both algorithms was validated by the elliptical joint confidence region(EJCR) test.The precision and repeatability were also investigated by the relative standard deviations(RSDs) of intra-day and inter-day.     

Highly sensitive detection of S-nitrosylated proteins by capillary gel electrophoresis with laser induced fluorescence

S-nitrosylated proteins are biomarkers of oxidative damage in aging and Alzheimer's disease (AD). Here, we report a new method for detecting and quantifying nitrosylated proteins by capillary gel electrophoresis with laser induced fluorescence detection (CGE-LIF). Dylight 488 maleimide was used to specifically label thiol group (SH) after switching the S-nitrosothiol (S-NO) to SH in cysteine using the "fluorescence switch" assay. In vitro nitrosylation model-BSA subjected to S-nitrosoglutathione (GSNO) optimized the labeling reactions and characterized the response of the LIF detector. The method proves to be highly sensitive, detecting 1.3 picomolar (pM) concentration of nitrosothiols in nanograms of proteins, which is the lowest limit of detection of nitrosothiols reported to date. We further demonstrated the direct application of this method in monitoring protein nitrosylation damage in MQ mediated human colon adenocarcinoma cells. The nitrosothiol amounts in MQ treated and untreated cells are 14.8±0.2 and 10.4±0.5 pmol/mg of proteins, respectively. We also depicted nitrosylated protein electrophoretic profiles of brain cerebrum of 5-month-old AD transgenic (Tg) mice model. In Tg mice brain, 15.5±0.4 pmol of nitrosothiols/mg of proteins was quantified while wild type contained 11.7±0.3 pmol/mg proteins. The methodology is validated to quantify low levels of S-nitrosylated protein in complex protein mixtures from both physiological and pathological conditions.     

Highly sensitive fluorescence detection of chloride ion in aqueous solution with Ag-modified porous g-C3N4 nanosheets

The porous g-C₃N₄ (PCN) nanosheets are successfully synthesized and further modified with nano-sized Ag by a simple wet-chemical process. Interestingly, the Ag-modified porous g-C₃N₄ (Ag-PCN) nanosheets exhibit competitive fluorescence detection performance of chloride ion (Cl⁻) in aqueous solution. Under the optimized conditions, the concentration of Cl⁻ could be quantitative analyzed with the Ag-PCN in a wide detection range from 0.5 mmol/L to 0.1 mol/L, with a low detection limitation of 0.06 mmol/L. It is confirmed that the fluorescence of PCN could be effectively decayed by the photoinduced charge transfer via the adsorbed Cl⁻ for trapping holes, mainly by means of the time-resolved fluorescence and surface photovoltage spectra. The porous structure and modified Ag promote the adsorption of Cl⁻ on resulting Ag-PCN, leading to excellent fluorescence detection for Cl⁻. This work provides a feasible route to develop a fluorescence detection of Cl⁻ with g-C₃N₄ nanosheets in environment water.     

A sensitive and selective detection method for thiol compounds using novel fluorescence probe

In this work, a sensitive and selective detection method based on fluorescence resonance energy transfer (FRET) was developed for analyzing thiol compounds by using a novel fluorescent probe. The new fluorescent probe contains a disulfide bond which selectively reacts with nucleophilic thiolate through the thiol-disulfide exchange reaction. An obvious fluorescence recovery can be observed upon addition of the thiol compound in the fluorescent probe solution due to the thiol-disulfide exchange reaction and the destruction of FRET. This novel probe was successfully used to determine dithiothreitol (DTT), glutathione (GSH) and cysteine (Cys). The limits of detection (LOD) were 2.0 μM for DTT, 0.6 μM for GSH, and 0.8 μM for Cys. This new detection method was further investigated in the analysis of compound amino acid injection.     

Highly selective fluorescence turn-on probe for glutathione

An activated coumarin-3-phenyl enone (1) by an intramolecular hydrogen bond has shown a selective and ratiometric response toward GSH and Cys over other natural amino acids through the Michael addition reaction of a thiol group to 1. When GSH was added to 1, a prominent color change together with a fluorescence turn-on property was observed so that submillimolar GSH was detectable.     

Highly sensitive fluorescent probe for detection of alkaloids

A new fluorescent probe, based on an amphiphilic Schiff-base zinc(II) complex, 1, for the sensitive detection of some important classes of alkaloids is presented. It exhibits optical absorption changes and fluorescence enhancement upon formation of 1:1 1·alkaloid adducts. Four diverse classes of alkaloids, represented by their basic structures and related representative prototypes, are investigated, through the study of optical and binding properties of 1·alkaloid adducts. It is found that the chromogenic and fluorogenic complex 1 is selective between these classes of alkaloids in the micromolar range, with a limit of quantification of 0.40 μM for nicotine and 0.43 μM for cinchonine.     

A new sensitive and selective fluorescence method for determination of chlorine dioxide in water using rhodamine S

A new simple, selective and sensitive method for the determination of trace chlorine dioxide in water has been developed, based on the oxidation by chlorine dioxide to reduction the fluorescence of rhodamine dyes in ammonia-ammonium chloride buffer solution. Four rhodamine dyes systems such as rhodamine S, rhodamine G, rhodamine B and butyl-rhodamine B were tested. The rhodamine S system is the best, with a linear range of 0.0060-0.450 μg mL⁻¹ and a detection limit of 0.0030 μg mL⁻¹ ClO₂. It was applied to the determination of chlorine dioxide in synthetic samples and real samples, with satisfactory results. This method has good selectivity, especially, other chlorine species such as chlorine, hypochlorite, chlorite and chlorate do not interfere the determination. The mechanism of fluorescence reduction was also considered.     

Determination of liposome permeability of ionizable carbamates of zidovudine by steady state fluorescence spectroscopy

In the present paper the relative permeabilities of AZT-Pyp and AZT-Ethy across a phospholipid bilayer were estimated by the means of fluorescence spectroscopy.

The center of spectral mass of both non-encapsulated AZT-derivatives (AZT-der) emission spectra increased as a function of the illumination time inside the spectrofluorimeter cell. This phenomenon was even more evident when drugs were incubated under an UV mercury lamp, suggesting its photolytic origin. AZT-der were protected from photolysis inside liposomes and decomposed upon irradiation when they were free in the aqueous phase. The time-dependent decrease in the fluorescence intensity at a constant wavelength was fitted to a two-exponential equation and the values of rate constants for permeability and photolysis were calculated. It was concluded that AZT-Pyp but not AZT-Ethy diffused across the bilayer. This behavior correlated with the molecular volumes of AZT-Pyp (379.6 Å³) and AZT-Ethy (450.5 Å³), determined from the minimum energy conformations but not with previously reported log P values. These results reinforce the concept that not only lipophilicity but also membrane structure and AZT-der molecular size had a critical influence in passive diffusion across bilayers and may help in future refinements of other AZT-der molecular design.     

Highly sensitive FRET-based fluorescence immunoassay for aflatoxin B1 using cadmium telluride quantum dots

We report on a competitive immunoassay for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from anti-aflatoxin B1 antibody (immobilized on the shell of CdTe quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The highly specific immunoreaction between the antibody against aflatoxin B1 on the QDs and the labeled-aflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photoexcitation of the QDs. In the absence of unlabeled aflatoxin B1, the antigen-antibody complex is stable, and strong emission resulting from the FRET from QDs to labeled aflatoxin B1 is observed. In the presence of aflatoxin B1, it will compete with the labeled aflatoxin B1-albumin complex for binding to the antibody-QDs conjugate so that FRET will be increasingly suppressed. The reduction in the fluorescence intensity of the acceptor correlates well with the concentration of aflatoxin B1. The feasibility of the method was established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the increased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spike human serum, over the range of 0.1–0.6 μmol·mL^?1. The limit of detection is 2?×?10^?11 M. This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require excessive washing and separation steps.

Fluorescein labeling of estrogen for application of fluorescence polarization binding assays for antibody and receptor

The fluorescence polarization binding assay (FPBA) using fluorescein-labeled estrogen tracer is a homogeneous assay applicable to both estrogen antibody and estrogen receptor-binding assays. Two estrogen-ethylendiamine fluoresceinthiobamyl (E-EDF) tracers were synthesized; estrogen-6-EDF (E-6-F) derived from 6-ketoestradiol 6-(o-carboxymethyl) oxime and estrogen-17-EDF (E-17-F) was from 17β-estradiol 17-hemisuccinate. In both FPBAs using antibody and receptor, E-6-F tracer (Rf_365nm=0.58) showed a better binding response than E-17-F (Rf_365nm=0.70) indicating that the 17-position of estrogen seems to play an essential role as a binding site for antibody or receptor. In the optimized conditions of FPBA for E₂ using E-6-F tracer, antibody binding (K_d=9.4×10⁻⁹ M) is 50 times sensitive than receptor binding (K_d=4.6×10⁻⁸ M). Binding responses of estrogen and its related chemicals by FPBA indicate that antibody binding assay is able to screen the structural similarity of estrogen showing some response with methyltestosterone (K_i=2.1×10⁻⁵ M). On the other hand, the receptor assay is able to screen for estrogenic chemicals such as tamoxifen (K_i=4.5×10⁻⁹ M) and diethylstilbesterol (K_i=8.1×10⁻⁷ M). Therefore, E-6-F tracer is useful as a tracer for FPBA that is able to screen for chemicals structurally similar to estrogen using antibody, and that is able to screen for chemicals functionally similar to estrogen using receptor binding assay.     

A 4-aminonaphthalimide based environmentally sensitive fluorescence probe

A simply synthesized 4-aminonaphthalimide derivative 1 expresses both polarity and viscosity sensitive fluorescence spectra, indicating its potential usage as an environmentally sensitive fluorescence probe. By comparing the fluorescence behavior of 1 with that of a known 4-aminonaphthalimide derivative 2, it was found that the substitution of the 4-amino group has profound influence on the environmentally sensitive fluorescence properties of 4-aminonaphthalimide.     

Study on interaction between drug and membrane by using liposome coated zirconia-magnesia chromatography

The interactions between drug molecules and membrane were studied using the new chromatography stationary phase of liposome coated zirconia–magnesia. log K_s(ZrO₂–MgO) on this new chromatography for some drugs, compared with that on liposome coated silica chromatography and other reported data, fair correlations were observed between them when excluding effect of special adsorption. log K_s(ZrO₂–MgO) values for barbitalum, diazepam, benzene, benzocaine and toluene correlated well with corresponding values on liposome coated silica chromatography (R = 0.99778, P < 0.001; R = 0.98229, P < 0.003; R = 0.9985, P < 0.0001; R = 0.99925, P < 0.0001, pH value of mobile phase at pH 7.4, 7.0, 6.4 and 5.4, respectively). They also correlated well with the literature data on immobilized artificial membrane chromatography (R = 0.99999, P < 0.004 at pH 7.4) and liposome chromatography (R = 0.99994, P < 0.008) for procaine, lidocaine and bupivacaine. Liposome coated zirconia–magnesia chromatography can thus be used for studying drug–membrane interaction and prediction of drug absorption as another liposome chromatography method.     

A sensitive method for the detection of catecholamine based on fluorescence quenching of CdSe nanocrystals

A sensitive method for the detection of catecholamine based on the fluorescence quenching of CdSe nanocrystals was developed. The sodium citrate-protected CdSe nanocrystals were synthesized in water solution. The fluorescence quenching of CdSe nanocrystals by dopamine, uric acid, ascorbic acid and catechol was studied; the results showed that all of these four kinds of compounds could quench the fluorescence of nanocrystals, and the quenching constant was 6.3 × 10⁴, 2.57 × 10³, 2.14 × 10³ and 1.168 × 10³, respectively. The order of sensitivity for the biosensor was: dopamine > lactic acid > ascorbic acid > catechol. This method shows good selectivity for dopamine, the detection limit reaches 5.8 × 10⁻⁸ M.     

Highly sensitive quantification of pemetrexed in human plasma using UPLC-MS/MS to support microdosing studies

Pemetrexed is an antifolate drug approved for the treatment of non-small-cell lung cancer and mesothelioma. Assessing pemetrexed pharmacokinetics after administration of a microdose (100 μg) may facilitate drug–drug interaction and dose individualization studies with cytotoxic drugs, without causing harm to patients. Therefore, a highly sensitive bioanalytical assay is required. A reversed-phase ultra-high performance liquid chromatography method was developed to determine pemetrexed concentrations in human ethylenediaminetetraacetic acid–plasma after microdosing. [¹³C₅]-Pemetrexed was used as the internal standard. The sample preparation involved solid-phase extraction from plasma. Detection was performed using MS/MS in a total run time of 9.5 min. The assay was validated over the concentration range of 0.0250–25.0 μg/L pemetrexed. The average accuracies for the assay in plasma were 96.5 and 96.5%, and the within-day and between-day precision in coefficients of variations was <8.8%. Extraction recovery was 59 ± 1 and 55 ± 5% for pemetrexed and its internal standard. Processed plasma samples were stable for 2 days in a cooled autosampler at 10°C. The assay was successfully applied in a pharmacokinetic curve, which was obtained as a part of an ongoing clinical microdosing study.