Synthesis of eight-membered iminocyclitols from d-glucose

The Baylis-Hillman reaction of 3-O-benzyl-α-d-xylo-pentodialdo-1,4-furanose 2 afforded a diastereomeric mixture of l-ido- and d-gluco-configurated α-methylene-β-hydroxy esters 3a and 3b, respectively, in 1:1 ratio. Conjugate addition of benzyl amine on 3a gave adduct 4a as a major product while, addition of benzyl amine to 3b gave only one diastereomer 4b. Reduction of ester functionality in 4a/4b, opening of 1,2-acetonide functionality followed by reductive amino-cyclization under hydrogenation condition afforded azocanes 1c/1d in good yield.     

Aza-Michael addition of chiral hydrazines to alkylidene malonates

The conjugate spontaneous addition of chiral N,N-dialkylhydrazines 1 to dimethyl alkylidene/arylidene malonates 2, 5-10 affords the corresponding β-hydrazino esters in moderate-to-good yields and selectivities. d-Mannitol-derived hydrazine 1a afforded best results, mainly due to the higher stability of the products 3, 11-16.     

Synthesis of poly-substituted pyrroles starting from the Baylis-Hillman adducts

We synthesized poly-substituted pyrrole derivatives 4a-e, 7a-c and 10a-d from the reaction of phenacyl bromide and the aza-Baylis-Hillman adducts 1a-d or their rearranged derivatives 5a-e. The pyrroles were synthesized via the successive N-alkylation, Michael addition, elimination of p-toluenesulfinic acid and oxidative aromatization processes.     

(R)-2,3-Cyclohexylideneglyceraldehyde: a novel template for simple entry into both cis- and trans-2,5-disubstituted tetrahydrofurans

Sharpless asymmetric dihydroxylation at the terminal olefin of benzoates 3a and 3b, using both AD-mix α and AD-mix β afforded only one diastereomer of diols 5a and 5b, respectively. Diols 5a and 5b were easily transformed into cis- and trans-2,5-disubstituted tetrahydrofurans 7 and 14, respectively, which were subsequently converted into known compounds 12 and 19.     

Asymmetric addition of diethylzinc to aromatic aldehydes by chiral ferrocene-based catalysts

A series of chiral C₁- and C₂-symmetric ferrocenyl Schiff bases (1a-c), ferrocenyl aminoalcohols (2a), ferrocenylphosphinamides (2b-c), 1,1′-ferrocenyl-diol (3), and 1,1′-ferrocenyl-disulfonamide (4) were prepared and employed as base catalysts or as ligand for titanium(IV) complexes in the asymmetric addition of diethylzinc to aromatic aldehydes. High enantioselectivity up to almost 100% ee was achieved for the alkylation of benzaldehyde and p-methoxybenzaldehyde with 1 or 3. In contrast, however, the β-aminoalcohol (2a) and phosphinamides (2b and c) that are ubiquitous classes of base catalysts for this reaction proved inefficient in our hands, regardless of the types of substrates or reaction conditions. Comparative studies show that there exist various reaction parameters governing not only chemical yields but also optical yields. These include steric and electronic environment of the substrate, the solvent, the reaction temperature, and the nature of the ferrocene moieties.     

Synthesis of selenium bridged metallacycles via oxidative addition of diaryl diselenide across Re-Re bond: Novel one-pot reaction approach

One-pot synthesis of novel M₂E₂L₂ type metallacycles [L(CO)₃Re(μ-SeR)₂Re(CO)₃L] (1-5) was accomplished by oxidative addition of diaryl diselenide to low-valent transition metal carbonyl with monodentate pyridine ligands. In metallacycles 1-5, where L = pyridine ligand, R = C₆H₅, CH₂C₆H₅, the pyridyl groups bonded to metal centres invariably adopted cis conformation due to π-π interaction whereas, in compounds 1a and 2a, the pyridyl ligands were oriented in trans conformation. When bulky phenyl groups are introduced at para position of pyridyl rings, as in case of metallacycle 3, the steric hindrance disrupts the soft interaction and resulted into the expansion of space in between two phenylpyridyl groups and created a void. The Metallacycles 1-5 have been characterised by elemental analysis, NMR, IR, absorption and emission spectroscopic techniques. Molecular structures of 1, 1a, 2, 2a, 3 and 4 were determined by single crystal X-ray diffraction analysis and the structural studies of 1, 2, 3 and 4 revealed that the pyridyl groups attached to the metal centres exhibited cis conformation, while 1a, 2a displayed trans conformation.     

Synthesis of 2,3-dihydroimidazo[1,2-a]pyrimidin-5(1H)-ones by the domino Michael addition retro-ene reaction of 2-alkoxyiminoimidazolidines and acetylene carboxylates

2-Alkoxyiminoimidazolidines 2-3 react with acetylene dicarboxylates and ethyl phenylpropiolate to give 8-alkoxy-imidazo[1,2-a]pyrimidin-5(3H)-ones C, which subsequently undergo a sterically induced multihetero-retro-ene fragmentation to give imidazo[1,2-a]pyrimidin-5(1H)-ones 4-7 together with formaldehyde or benzaldehyde. On the other hand, a similar reaction of 2-3 with ethyl propiolate gives corresponding 8-alkoxy-imidazo[1,2-a]pyrimidin-5(3H)-ones 8-10. The unsubstituted imidazo[1,2-a]pyrimidin-5(1H)-one 11 can be prepared by retro-ene reaction of 9 upon prolonged heating in refluxing ethanol. A direct synthetic approach to 1-formyl-7-phenyl-imidazo[1,2-a]pyrimidine-5(1H)-one 14 is reported using DMF/sulfonyl chloride as a new Vilsmeier-type N-formylating reagent.     

New synthesis of 2-trifluoromethyl-2,3-dihydro-1H-quinolin-4-ones

N-(1-Ethoxy-2,2,2-trifluoroethyl)anilines 2a-2f, prepared from trifluoroacetaldehyde ethyl hemiacetal and aniline, readily reacted with diethyl malonate in the presence of sodium hydride, giving substituted products 5a-5f in high yields. Compounds 5a-5f subjected to hydrolysis and decarboxylation under specified conditions yielded the 4,4,4-trifluorobutyric acids 6a-6e or 7. Direct ring-closure of 6a-6e with polyphosphoric acid gave 2-trifluoromethyl-2,3-dihydro-1H-quinolin-4-ones 9a-9e.     

Transannular Anti-Michael Addition: Formation of 4H-Pyrazolo[5,1-c]thiazines

The reaction of 2-(diphenylmethylene)thietan-3-one (2) with 1,2,4,5-tetrazines (3a-c) in KOH/MeOH/THF gives 4H-pyrazolo[5,1-c]thiazines (7a-c). This novel condensation reaction proceeds via the intermediacy of an 8-(diphenylmethylene)-2H-1,4,5-thiadiazocin-7(8H)-one (5), which undergoes a multi-step rearrangement including a rare anti-Michael addition.     

Base-mediated reactions of N-alkyl-O-acyl hydroxamic acids: synthesis of 3-oxo-2,3-dihydro-4-isoxazole carboxylic ester derivatives

Treatment of malonyl derived O-acyl hydroxamic acid derivatives 10a-h with the phosphazene super base P-2-t-Bu 7 gives 2,3-dihydro-4-isoxazole carboxylic ester derivatives 11a-h. The rate and yield of the reaction is dependent upon the O-acyl substituent.     

Ruthenium vinylidene and carbyne complexes containing a multifunctional tridentate ligand with a PNN donor set

The neutral, octahedral ruthenium vinylidene complexes mer,trans-[(PNN)Cl₂Ru(CCHR)] (PNN = N-(2-diphenylphosphinobenzylidene)-2-(2-pyridyl)ethylamine; R = Ph, 1a; R = ^tBu, 1b) are reported. An X-ray crystallographic study of 1a confirms the tridentate, meridional coordination mode of the PNN ligand. Compounds 1a and 1b undergo regioselective electrophilic addition with HBF₄ · Et₂O at C_β of the vinylidene ligand at low temperatures, and are cleanly and quantitatively converted to the ruthenium carbynes mer,trans-[(PNN)Cl₂Ru(CCH₂R)][BF₄] (R = Ph, 2a; R = ^tBu, 2b). Carbynes 2a and 2b are stable only at low temperatures (<−50 °C). Complex 1a undergoes ligand substitution with L to yield mer,trans-[(PNN)Cl₂Ru(L)] (L = MeCN, 3a; L = CO, 3b).     

Preparation of β-fluoro- and β,β-difluoro-histidinols

Nucleophilic attack of azide on 2-bromo-3-fluoro-3-(1-trityl-1H-imidazol-4-yl)-propan-1-ol (1a) in aprotic solvent occurs on the 2-position to give the 2-azido derivative (2a). Reduction of azide and removal of the trityl group produces β-fluorohistidinol (6a). Elimination of HBr from 1a followed by “FBr” addition to the resulting double bond gives 2-bromo-3,3-difluoro-3-(1-trityl-1H-imidazol-4-yl)-propan-1-ol (1b). Nucleophilic attack of azide followed by reduction and removal of the trityl group, as for the preparation of 6a, gives β,β-difluorohistidinol (6b). Initial attempts, under a variety of conditions, to oxidize the fluorinated histidinol precursors to carboxylic acids have not been successful.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

A thorough study on the reaction of DMAD with 1-arylaminoimidazole-2-thiones. Expeditious synthesis of imidazo[2,1-b][1,3]thiazoles through a novel arylamino rearrangement

Upon reaction of 1-arylamino-imidazole-2-thiones 1 with dimethyl acetylenedicarboxylate (DMAD) in the presence of 2.2 equiv of sodium hydride, imidazothiazoles 4 were exclusively formed (71-82% yield). However, from the reaction of 1 with DMAD in the absence of base, only the S-substituted products 5 were formed as an E/Z mixture (53-55%), which could also be converted to 4 with 2.0 equiv of sodium hydride (65-68%). Furthermore, 5a-E/Z was converted to arylamino-substituted derivatives 8a upon reaction with 1.1 equiv of sodium hydride in 78% yield. Formation of 8a (75% yield) was also possible by reaction of thione 1a with DMAD in the presence of sodium methoxide in methanol. Substitution on the imidazole 3-NH of thione 1a leading to 6a-Z was observed either by heating 1a with DMAD (91%) or by heating the 5a-E/Z mixture in benzene (90% yield). Finally, when 5a-E reacted with acetic anhydride the acetylated derivative 7a-Z was the only isolated product (58%). Full assignment of all ¹H and ¹³C NMR chemical shifts has been unambiguously achieved.     

Reactions of some anellated 2-aminothiophenes with electron poor acetylenes

The reactivity of 2-aminothiophenes in two different anellations: (a) [b]-anellation to a saturated carbocycle and (b) [3,4-c]-anellation to benzopyrans, towards typical acetylenic dienophiles has been investigated. Because of the absence of conjugation, the thiophenes of type (a) do not undergo [4+2]-cycloaddition with acetylenic dienophiles. Instead, the N-vinylated products 2 and 3 were obtained with dimethyl acetylene dicarboxylate (DMAD). Electron poor alkynes react with the thiophenes of type (b) in three main ways: DMAD reacts in a [4+2]-mode in dioxane to give the products 7, 8 and 14; a Michael addition type reaction also takes place at the doubly vinylene homologous carbon atoms (C-1 in the starting materials 4, 9 and 10) in dioxane, methanol or ethanol. Methyl propiolate reacts in a similar way. The doubly N-vinylated product 26 was obtained from 10 in toluene and the C-1 vinylated products 24B and 27 were obtained from 9 in dioxane and 10 in methanol. The reaction of 10 with phenyl ethyl propiolate in dimethylformamide gave no addition product, instead a dimer of the acetylenic reagent was the isolated product. The accuracy of the assigned structures 5, 12 and 13a could be achieved on the basis of a single-crystal X-ray structure analysis of compound 13a. The reaction mechanism and the nature of the isolated products are dependent on the nature of the solvent. No addition reaction was observed between 17 and DMAD. The influence of the N-substitution on the nature of the addition (Michael or Diels-Alder) could be settled through the reactions of 18 and 21 with DMAD, which gave 19 and 14 (via 22), respectively as the only isolable products.     

Addition of carbon nucleophiles to cyclic N-acyliminium ions in SDS/water

The acid-catalyzed addition of 1,3-dicarbonyl compounds and activated olefins (silyl enol ethers and ethyl vinyl ether) to N-Boc-2-methoxypyrrolidine (1a) and N-Boc-2-methoxypiperidine (1b) in SDS/water medium is described. Good yields of the corresponding 2-substituted N-Boc pyrrolidines were generally observed from 1a while moderate yields prevailed from 1b.     

Synthesis of the first pseudo-phosphonopeptides derived from (ferrocenyl)aminomethanephosphonous acids

The first example of the condensation of (ferrocene)-N-benzhydrylamino-methanephosphonous acid (1) with α-amino acids 2a-d and several model dipeptides 4a-d and the tripeptide dl-alanyl-dl-leucinyl-glycine (4e) in the presence of DCC resulted in pseudo-phosphono-dipeptides 3a-d and pseudo-phosphono-oligopeptides 5a-d. The probable chiral assistance of the incoming amino acid or peptide in the formation of the new chiral center on phosphorus was also a feature of this method.     

Functionalization of C60 via organometallic reagents

The reaction of [60]fullerene with organolithium and Grignard reagents carrying orthoester, acetal or other end groups yielded adducts 3-5 at the 6-6 bond of C60 after quenching with trifluoroacetic acid. The adducts could be easily methylated or benzylated with methyl iodide or benzyl bromide in the presence of potassium tert-butoxide to yield exclusively the 1,4-disubstituted C60 6 and 7a,b. Cleavage of the orthoester, acetal and silylether groups gave the corresponding carboxylic acid 9, aldehydes 10a,b and 11 and alcohols 12 and 13a,b. The carboxylic acid 9 readily reacted with alanine ethyl ester under standard peptide coupling conditions to give 14 in 55% yield. Attempts to generate a silyl enol ether from the reaction of aldehyde 10b with TIPSOTf and triethylamine failed. Instead the reaction led to a cyclized ether 16a (or alcohol 16b in the absence of silylating agent) resulting from the addition of an initially formed fulleride anion to the aldehyde group. The corresponding acetal 4b reacted similarly. The reaction of aldehyde 10b with aniline also gave a cyclized product 19. Surprisingly, aldehyde 11, which no longer carried an acidic fullerene proton reacted with aniline to give a product 20 resulting from an intramolecular Diels-Alder reaction followed by aromatization of a primarily formed N-phenylimine. Alcohol 13b could be readily converted to the corresponding bromide using tetramethyl-α-bromoenamine. The bromide was reacted with the carbanion derived from the protected glycine derivative to yield the diastereomeric fullerene amino acid derivatives 1-benzyl-4-[α-propyl-tert-butylglycinate benzophenone imine] 1,4-dihydro[60]fullerenes 24a and 24b.     

An efficient electrochemical method for a unique synthesis of new derivatives of 7H-thiazolo[3,2-b]-1,2,4-triazin-7-one

The electrochemical oxidation of catechols (1a-c) has been studied in the presence of 6-methyl-1,2,4-triazine-3-thion-5-one 3 in aqueous sodium acetate, using cyclic voltammetry and controlled-potential coulometry. A plausible mechanism for the oxidation of catechols and their reaction with 3 is presented. All the catechol derivatives (1a-c) were converted into 7H-thiazolo[3,2-b]-1,2,4-triazin-7-one derivatives (6a-c) through a Michael-type addition reaction of 3 to anodically generated o-quinones. The electrochemical syntheses of 6a-c were successfully performed in one pot in an undivided cell using an environmentally friendly method with high atomic economy.     

The conversion of 2-cyano cyanothioformanilides into 3-aminoindole-2-carbonitriles using triphenylphosphine

2-Cyano cyanothioformanilide 3a reacts with triphenylphosphine in the presence of water to give 2-(cyanomethyleneamino)benzonitrile 4a, 2-(cyanomethylamino)benzonitrile 5, 3-aminoindole-2-carbonitrile 2a and (2-cyanoindol-3-yl)iminotriphenylphosphorane 6a. In the presence of p-toluenesulfonic acid in MeOH the reaction between 2-cyano cyanothioformanilide 3a and triphenylphosphine (2 equiv) gives 3-aminoindole-2-carbonitrile 2a in 90% yield. Under the same conditions 2-(cyanomethyleneamino)benzonitrile 4a gives anthranilonitrile 8a, 3-aminoindole-2-carbonitrile 2a and N-(2-cyanophenyl)formamide 9. In addition, substituted 2-cyano cyanothioformanilides 3b-f react with triphenylphosphine and p-toluenesulfonic acid in MeOH to give 3-aminoindole-2-carbonitriles 2b-f in 63-75% yields. Under analogous conditions 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 2g gives only 4,5-dimethoxyanthranilonitrile 8g and 4,6,7-trimethoxyquinazoline-2-carbonitrile 14g, but in refluxing dry PhMe in the absence of p-toluenesulfonic acid 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 3g, (2-cyano-5,6-dimethoxyindol-3-yl)iminotriphenylphosphorane 6g and 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g are obtained. The structure of 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g is supported unambiguously via independent synthesis and comparison to the isomeric 6,7-dimethoxyquinazoline-2-carbonitrile 15. All new compounds are fully characterised and a tentative mechanism for the transformation of 2-cyano cyanothioformanilides to indoles is proposed.