苯乙烯/马来酸酐共聚物修饰碳纳米管的研究

利用羟基碳纳米管上的羟基与马来酸酐之间的简单反应, 在碳纳米管上引入双键, 进一步引发苯乙烯聚合, 在碳纳米管表面接枝苯乙烯马来酸酐共聚物, 同时采用羟基碳纳米管与苯乙烯马来酸酐共聚物直接反应也在碳纳米管的表面引入了苯乙烯马来酸酐共聚物. 经IR, Raman, TG和TEM测定, 证明了碳纳米管与苯乙烯马来酸酐共聚物之间为化学键连接关系.     

苯乙烯马来酸酐共聚物化学改性研究进展

苯乙烯-马来酸酐共聚物具有优异的乳化、成膜、增稠等特性,是一种重要的功能化聚合物.从酯化、胺化、苯环接枝、带上电荷、引入功能性基团和引入第三单体等方面对于苯乙烯-马来酸酐共聚物化学改性进行了全面的总结,简评了各种化学改性的方法及改性共聚物的优点,报道了化学改性方法近年来出现的新进展.     

原位聚合法制备厌氧胶固化引发剂微胶囊

采用原位聚合法制备了以脲醛树脂为壁材、过氧化苯甲酰为芯材的厌氧胶固化引发剂微胶囊。研究了乳化剂聚丙烯酸钠、十二烷基苯磺酸钠、阿拉伯树胶、苯乙烯-马来酸酐共聚物的单独使用及阿拉伯树胶与苯乙烯-马来酸酐共聚物的复配组合和其它工艺条件对微胶囊制备的影响;运用FT-IR、TG和SEM等测试技术对微胶囊进行了表征。结果表明,以苯乙烯-马来酸酐共聚物和阿拉伯树胶作为复合乳化剂,反应终点pH值为1.5左右,反应温度70℃,反应时间4 h,搅拌速率1 000 r/m in,可制得分散适中、形貌较好、粒径约为100μm的微胶囊。以实验制备的微胶囊配制成可预涂厌氧胶胶液,性能可以达到国外公司同类产品的技术指标。     

热重法测定高马来酸酐含量苯乙烯-马来酸酐共聚物的组成

高马来酸酐含量苯乙烯-马来酸酐共聚物(SMA)是一种具有优良耐热性、刚性和尺寸稳定性的新型高分子材料.由于SMA分子中含有极性很强、反应活性很高的酸酐官能团,所以它被广泛应用于涂料、粘合剂的改性剂、地板抛光的乳化剂、复合材料和颜料的分散剂、水处理剂等领域[1-5].     

低相对分子质量苯乙烯-马来酸酐交替共聚物的合成

将引发剂偶氮二异丁腈(AIBN)、共聚单体苯乙烯(St)和马来酸酐(MA)溶解于甲苯中,采用沉淀聚合法合成苯乙烯-马来酸酐共聚物(SMA).分别研究了反应温度、引发剂用量、反应时间、单体配比和单体浓度对聚合物得率和酸酐含量的影响.采用正交实验确定最优反应条件为:单体浓度20%,单体物质的量比为1∶1,引发剂用量为0.60%,反应温度为86℃,反应时间2h,产物得率为86.86%,酸酐含量为50.28%.并利用傅里叶变换红外光谱(FTIR)、核磁共振碳谱(~(13)C NMR)、凝胶渗透色谱(GPC)和热分析法分别研究聚合物的分子结构、相对分子质量及相对分子质量分布和热稳定性.结果表明产物是苯乙烯-马来酸酐交替共聚物,相对分子质量分布较窄,具有良好的热稳定性.     

碳纤维电沉积处理对其复合材料结构与性能的影响

为了(1)研究共聚物在碳纤维表面的电沉积处理对复合材料剪切强度的改善;(2)寻找适用于工业生产的电沉积条件;(3)探求聚合物在碳纤维表面的电沉积机理;(4)分析电沉积对复合材料破坏模式的影响,本工作分别以苯乙烯-马来酸酐、醋酸乙烯酯-马来酸酐和甲基丙烯酸甲酯-马来酸酐共聚物的钱盐水溶液作为电沉积液, 取纤维前处理、电沉积电流密度和沉积时间三个因子, 各选三个水平排成拉丁方来优选处理条件。     

苯乙烯-马来酸酐共聚物的生物降解性研究

合成了一系列苯乙烯．马来酸酐共聚物(SMA)。并对共聚物的结构进行了表征。用土埋法和CO2释放法研究了共聚物的生物降解性。探讨了分子量、组成、环境等因素对生物降解性的影响,发现共聚物的分子量降低。降解率增大;共聚物中马来酸酐含量提高。降解率增大;适宜的环境有利于生物降解。     

聚(苯乙烯-alt-马来酸酐)-b-聚苯乙烯亲水/亲油嵌段共聚物在溶液中的聚集行为研究

采用RAFT方法合成了由马来酸酐／苯乙烯和苯乙烯组成的交替序列两嵌段共聚物P(MAn-alt-St)-b-PSt。将其中的马来酸酐用PEO进行水解,得到了支化的亲水亲油两嵌段共聚物。通过H—NMR和IR对共聚物的结构组成进行表征。以二甲基氨基黄酮化舍物为荧光探针,测定了形成共聚物胶束的临界浓度(CMC)。用TEM和SEM现察不同酸碱条件下所得纳米材料形貌,并对其形成机制进行了讨论。     

具有分子间氢键的刚性长侧链液晶高分子的合成

主链液晶高分子材料力学性能的各向异性,限制了其作为结构材料的应用和发展^[1].含马来酸酐共聚物(如与乙烯、异丁烯、十八碳烯、苯乙烯和氯乙烯等交替、无规结构共聚物,其中马来酸酐质量分数为5%～50%)是一种耐热性和加工性优良的树脂.     

4-PEG接枝苯乙烯-马来酸酐交替共聚物的合成及功能化

采用普通自由基聚合和可逆加成一断裂链转移（RAFT）自由基聚合方法合成了对位PEG取代苯乙烯（PEG-g-St）和马来酸酐的交替共聚物（P（（PEG—g—St）-alt-MA））,”CNMR分析表明PEG-g-St和马来酸酐单元采取交替的序列结构．利用反应性基团-马来酸酐单元的水解以及胺解可以制备功能性的PEG聚合物．以月桂胺为模型小分子研究了该聚合物的胺解,得到4-PEG-苯乙烯与羧酸基团以及疏水烷烃的交替序列聚合物,该双亲聚合物在水溶液中形成组装体．     

Reactions de condensation interpolymeriques a l'etat fondu

Condensation reactions between the anhydride groups of a copolymer containing maleic anhydride links and OH groups on different molecules were carried out in a plastograph, the copolymer being in the molten state. If dihydroxylated molecules or even telomers were used, the progress of reaction is easily followed by the rising of the consistency of the melt. The ester bridges formed between two copolymer molecules may be disrupted by methanolic transesterification in basic solution. Study of the reactivity of a series of monohydroxylated polymers of increasing DP showed that the compatibility of these hydroxylated polymers with maleic anhydride copolymer in the molten state is of outstanding importance for a good yield.     

POLYMERIC ACID FOR THIN FILM APPLICATIONS

ABSTRACT

Propyl and butyl half esters of the alternating copolymer isobutylene/maleic anhydride (IB/MAn) are polymers of high acid content (4.67 and 4.38 milliequivalent acid/g polymer). These polymers exhibit good physical performance in thin films, such as absence of cracking and minimal curl. The anhydride ring of the copolymer IB/MAn is opened in refluxing alcohol at atmospheric or elevated pressure; conversion is monitored by an IR probe (1783 vs. 1733 cm?1). The polymers are stable up to about 50 °C. Weight loss corresponding to the reversion to the anhydride structure is observed at higher temperature, with concurrent increase of anhydride resonances in the IR. Thermal stability of the half esters is similar to that of alkyl half esters of the alternating copolymers ethylene/maleic anhydride (EMA) and methyl vinyl ether/maleic anhydride (Gantrez® AN 119). The 1-propanol solution of the propyl half ester of IB/MAn copolymer is a shear thinning fluid, a significant advantage when coating at high speeds.     

Triphenylphosphine oxide supported on non-cross-linked maleimide-styrene copolymer: application as a novel Hendrickson reagent

A new triphenylphosphine oxide reagent linked to a linear maleimide-styrene copolymer is synthesized. This phosphine-bound copolymer is converted to copolymer-supported triphenylphosphine ditriflate as a novel Hendrickson reagent by treatment with triflic anhydride. This reacts rapidly in various dehydration reactions such as anhydride, ester and amide formation. This linear and soluble support is also easily recovered and recycled several times without loss of efficiency.     

C60-苯乙烯-顺丁烯二酸酐的三元自由基共聚

自从研制出克量的Ｃ6 0 [1],其在超导光、电、磁、生物等领域的研究迅速发展 .由于Ｃ6 0 只溶于几种非极性溶剂中 ,其使用受到限制 ,从而制备Ｃ6 0 的高分子衍生物一直被认为是Ｃ6 0 材料化的重要途径[2 6 ].文献 [39]报道 ,富勒烯与含双键的单体如苯乙烯、甲基丙烯酸甲酯等可很方便地进行自由基共聚 ,得到富勒烯与烯类单体的共聚物 ,产物可溶于四氢呋喃等有机溶剂 .但迄今为止 ,可溶于水或其它强极性溶剂中的Ｃ6 0 聚合物研究的很少[10 ,11],而Ｃ6 0 的三元共聚物的制备几乎未见报道 ,为此 ,我们采用自由基共聚制备了Ｃ6 0 苯乙烯 顺丁烯…     

苯乙烯─马来酸酐共聚物／聚硅氧烷纳米尺度复合材料的研究

用溶胶－凝胶方法制备了苯乙烯、马来酸酐和ｒ－缩水甘油丙基醚三甲氧基硅烷复合材料．利用红外光谱、动态力学分析、小角Ｘ－射线散射和原子力显微镜等手段研究了这种材料的结构与性能．结果表明，这种材料以三维网络和纳米微相分离的形式存在，其力学性能和耐热性能较苯乙烯－马来酸酐共聚物有大幅度提高，透明且不溶于丙酮．     

苯乙烯─马来酸酐共聚物／聚硅氧烷纳米尺度复合材料的研究

用溶胶－凝胶方法制备了苯乙烯、马来酸酐和ｒ－缩水甘油丙基醚三甲氧基硅烷复合材料．利用红外光谱、动态力学分析、小角Ｘ－射线散射和原子力显微镜等手段研究了这种材料的结构与性能．结果表明，这种材料以三维网络和纳米微相分离的形式存在，其力学性能和耐热性能较苯乙烯－马来酸酐共聚物有大幅度提高，透明且不溶于丙酮．     

Microstructure of Vinyl Chloride-Maleic Anhydride Copolymer in Condensed State

The structure of the macromolecule of an equimolar native vinyl chloride-maleic anhydride copolymer was studied. A mechanism of copolymerization of vinyl chloride with maleic anhydride is proposed.     

Radiation-induced solid-state copolymerization of maleic anhydride and acenaphthylene

Radiation-induced solid-state copolymerization of the maleic anhydride–acenaphthylene system was carried out for the purpose of studying the solid-state polymerization of vinyl compounds in a binary system. Melting point measurement confirmed that this binary monomer system forms a eutectic mixture in the solid state. The solid-state polymerization of these monomers proceeds at maximum rate at the eutectic composition, and the polymerization products consist of a mixture of polyacenaphthylene and 1:1 maleic anhydride–acenaphthylene alternating copolymer. Since the 1:1 copolymer was obtained in solution polymerization also and maleic anhydride did not homopolymerize in solid state, it is considered that the solid-state copolymerization of maleic anhydride and acenaphthylene occurs in a liquidlike state at the boundary of the two monomer crystals.     

Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

New Type of Prototropic Tautomerism Involving Carbon,Hydrogen, and Oxygen Atoms

A low-molecular weight analog of the vinyl chloride–maleic anhydride copolymer, chloromethylsuccinic anhydride gives rise to a new type of prototropic tautomerism, cyclic anhydride–enol, with formation of quasiaromatic enol and dienol derivatives. The ratio of the anhydride and enol tautomers in solution at room temperature is 7 : 1.