Preparation and photoactivity of thermosensitive polymer supported metallophthalocyanine

A novel reactive metallophthalocyanine derivative,zinc tetra(2,4-dichloro-1,3,5-triazine)aminophthalo-cyanine(Zn-TDTAPc),was prepared and immobilized on poly(N-isopropylacrylamide)(PNIPAAm) by covalent bonding to obtain a thermosensitive polymer(Zn-TDTAPc-g-PNIPAAm).Compared with zinc tetraaminophthalocyanine(Zn-TAPc),Zn-TDTAPc-g-PNIPAAm exhibits excellent solubility in water and in most organic solvents.Furthermore,it has a special thermosensitive property in water and the lower critical solution temperature(LCST) is 34.1℃.It was found that both dissolved and precipitated Zn-TDTAPc-g-PNIPAAm present high photoactivity evidenced by the experiment of photocatalytic degra-dation of 1,3-diphenylisobenzofuran(DPBF) in the presence of Zn-TDTAPc-g-PNIPAAm.These proper-ties suggest that it can be used potentially in photodynamic therapy(PDT).     

Preparation of thermosensitive nanogels by photo-cross-linking

 A novel method to prepare thermosensitive nanogels from photocross-linkable copolymers of N-isopropylacrylamide and dimethyl maleinimido acrylamide (DMIAAm) was developed. The colloidal nanogels were formed by UV irradiation of solutions of thermosensitive polymers in water at 45 °C. The compositions of the photopolymer solutions were varied by changing the amount of DMIAAm in the photopolymer chains (2–10 mol%) or by varying the sodium dodecyl sulfate (SDS) concentration. The resultant nanogel particles were rather spherical and showed large changes in hydrodynamic diameters in the vicinity of the phase transition temperature of the corresponding linear photopolymers. The particle sizes of the nanogels and their swellability could be controlled through the UV irradiation time, the chromophore content and the SDS concentration. An increase in the chromophore content and the SDS concentration resulted in nanogels with smaller dimensions. The hydrodynamic diameters of the nanogels decreased significantly from 2 to 10 min UV irradiation time but not significantly after that. The phase transition of the photopolymer solutions and the respective nanogels could be adjusted by the chromophore content or the SDS concentration. An increase in the chromophore content leads to lower phase-transition temperatures, whilst an increase in the SDS concentration elevated them. Pulsed-field-gradient NMR proved a useful tool to investigate the network formation in the nanogels by determining changes in the diffusion coefficients. Received: 14 May 2001 Accepted: 1 June 2001     

Preparation and characterization of thermosensitive polymers grafted onto silica-coated iron oxide nanoparticles

In this study, multifunctional nanoparticles containing thermosensitive polymers grafted onto the surfaces of 6-nm monodisperse Fe(3)O(4) magnetic nanoparticles coated by silica were synthesized using reverse microemulsions and free radical polymerization. The magnetic properties of SiO(2)/Fe(3)O(4) nanoparticles show superparamagnetic behavior. Thermosensitive PNIPAM (poly(N-isopropylacrylamide)) was then grafted onto the surfaces of SiO(2)/Fe(3)O(4) nanoparticles, generating thermosensitive and magnetic properties of nanocomposites. The sizes of fabricated nanoparticles with core-shell structure are controlled at about 30 nm and each nanoparticle contains only one monodisperse Fe(3)O(4) core. For thermosensitivity analysis, the phase transition temperatures of multifunctional nanoparticles measured using DSC was at around 34-36 degrees C. The magnetic characteristics of these multifunctional nanoparticles were also superparamagnetic.     

Preparation of biodegradable polymer nanoparticles by miniemulsion technique and their cell interactions

The emulsion/solvent evaporation method and miniemulsion technique were combined and applied in the formulation of biodegradable monodisperse nanoparticles at high solid contents using different biocompatible and biodegradable polymers such as poly(L-lactide) (PLLA), poly[(D,L-lactide)-co-glycolide] 50:50 (PLGA), and poly(epsilon-caprolactone) (PCL). Differences between the results of various polymers are found in terms of the particle size and size distribution as well as in the degradation time. An encapsulated hydrophobic fluorescent dye was used as a model marker in order to study the entrapment efficiency and diffusion yield out of the particle. Cellular uptake of the obtained particles was observed in Jurkat and HeLa cells. In the investigated particle size range of 80-200 nm, the surfactant on the particles' surface had a greater influence than the particle size. Uptake kinetics reveals that the PLLA and PCL particles are endocytosed much faster than polystyrene particles.     

Preparation and encapsulation of highly fluorescent conjugated polymer nanoparticles

A facile method has been developed to prepare aqueous dispersions of encapsulated conjugated polymer nanoparticles exhibiting high fluorescence brightness. Salient features of the nanoparticles include their small diameter and spherical morphology. Encapsulation of the nanoparticles with a silica shell reduces the rate of photooxidation and allows facile attachment of functional groups for subsequent bioconjugation and nanoparticle assembly. Functionalization of the nanoparticle with amine groups followed by the addition of Au nanoparticles resulted in the formation of nanoparticle assemblies, as evidenced by the efficient quenching of the conjugated polymer fluorescence by the Au nanoparticles.     

Reduction of polymer surface tension by crystallized polymer nanoparticles

Self-consistent field theory is applied to investigate the effects of crystallized polymer nanoparticles on polymer surface tension. It is predicted that the nanoparticles locate preferentially at the polymer surface and significantly reduce the surface tension, in agreement with experiment. In addition to the reduction of surface tension, the width of the polymer surface is found to narrow. The reduced width and surface tension are due to the smaller spatial extent of the nanoparticles compared to the polymer. This allows the interface to become less diffuse and so reduces the energies of interaction at the surface, which lowers the surface tension. The solubility of the surrounding solvent phase into the polymer melt is mostly unchanged, a very slight decrease being detectable. The solubility is constant because away from the interface, the system is homogeneous and the replacement of polymer with nanoparticles has little effect.     

Reversible controlled assembly of thermosensitive polymer-coated gold nanoparticles

Aggregation of thermosensitive polymer-coated gold nanoparticles was performed in aqueous solution in the presence of a triblock copolymer poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (Pluronic P123, PEO(20)-PPO(68)-PEO(20)). The gold nanoparticles, AuNPs, which are covered by thermosensitive statistical copolymers poly(EO(x)-st-PO(y)), aggregate when the temperature is higher than the phase transition temperature of the polymer, leading to a macroscopic precipitation. The presence of Pluronic chains in solution prevents the uncontrolled aggregation of the AuNPs at higher temperature than both the aggregation temperature of the AuNPs (T(agg)) and the critical micellization temperature (cmt) of the Pluronic. The size, the colloidal stability, and the optical properties of the AuNPs aggregates are modulated as a function of the P123-to-AuNP ratio, which constitutes the critical parameter of the system. Moreover, the AuNP aggregation is totally reversible upon decreasing the temperature below T(agg). Our approach constitutes an easy way to the formation of well-controlled nanoparticle aggregates with well-defined sizes. The resulting aggregates have been characterized by UV-vis spectroscopy, dynamic light scattering, and electron microscopy.     

A composite microporous gel polymer electrolyte prepared by ultra-violet cross-linking

A new type of composite microporous gel polymer electrolyte was prepared by directly coating the hydrolyzed prepolymers onto PVdF microporous membrane, and then polymerizing and cross-linking with ultra-violet (UV). Their chemical, thermal, surface microscopic configuration, swelling ability and electrochemical properties have been investigated for various prepolymer’s solution concentrations. The swelling ability and ionic conductivity of the membrane supporting hybrid gel electrolyte (MSHGE) could reach an extreme point at 0.15 g/ml of the prepolymer’s solution. It is thought that their performance can be affected by the surface microscopic configuration and the quality of coated copolymer. The Arrhenius-type relationship was observed in the temperature dependence of ionic conductivity. The ionic conductivity of MSHGE (PVdF-15) at room temperature can reach 6.18 × 10⁻³ S cm⁻¹, and its electrochemical stability window is about 4.9 V.     

Thermosensitive pluronic micelles stabilized by shell cross-linking with gold nanoparticles

Gold nanoparticles were employed to prepare shell cross-linked Pluronic micelles that exhibit a reversibly thermosensitive swelling/shrinking behavior. Two terminal hydroxyl groups of Pluronic F127 were thiol-functionalized to form self-assembling Pluronic micelles in aqueous solution with exposed -SH groups in an outer shell layer. The thiol groups present in the outer shell were cross-linked by gold nanoparticles synthesized through NaBH4 reduction of gold precursor anions. The resultant shell cross-linked gold-Pluronic micelles exhibited a temperature-dependent volume transition: their hydrodynamic diameter was changed from 157.1 +/- 15.6 nm at 15 degrees C to 53.4 +/- 5.5 nm at 37 degrees C as determined by dynamic light scattering. The critical micelle temperature measured by a pyrene solubilization technique suggested that the reversible swelling/shrinking behavior of the micelles was caused by hydrophobic interactions of cross-linked or grafted Pluronic copolymer chains in the micelle structure with increasing temperature. Transmission electron microscopy directly revealed that the shell cross-linked micelles were indeed produced by gold nanoparticles covalently clustered on the surface. These novel self-assembled organic/inorganic hybrid micelles would hold great potential for diagnostic and therapeutic applications.     

Enhanced stability of Janus nanoparticles by covalent cross-linking of surface ligands

A mercapto derivative of diacetylene was used as the hydrophilic ligand to prepare Janus nanoparticles by using hydrophobic hexanethiolate-protected gold (AuC6, diameter 5 nm) nanoparticles as the starting materials. The amphiphilic surface characters of the Janus nanoparticles were verified by contact angle measurements, as compared to those of the bulk-exchange counterparts where the two types of ligands were distributed rather homogeneously on the nanoparticle surface. Dynamic light scattering studies showed that the Janus nanoparticles formed stable superstructures in various solvent media that were significantly larger than those by the bulk-exchange counterparts. This was ascribed to the amphiphilic characters of the Janus nanoparticles that rendered the particles to behave analogously to conventional surfactant molecules. Notably, because of the close proximity of the diacetylene moieties on the Janus nanoparticle surface, exposure to UV irradiation led to effective covalent cross-linking between the diacetylene moieties of neighboring ligands, as manifested in UV-vis and fluorescence measurements where the emission characteristics of dimers and trimers of diacetylene were rather well-defined, in addition to the monomeric emission. In contrast, for bulk-exchange nanoparticles, no trimer emission could be identified, and the intensity of dimer emission was markedly lower (though the intensity increased with increasing diacetylene coverage on the particle surface) under the otherwise identical experimental conditions. This is largely because the diacetylene ligands were distributed on the entire particle surface, and it was difficult to find a large number of ligands situated closely so that the stringent topochemical principles for the polymerization of diacetylene derivatives could be met. Importantly, the cross-linked Janus nanoparticles were found to exhibit marked enhancement of the structural integrity, which was attributable to the impeded surface diffusion of the thiol ligands on the nanoparticle surface, as manifested in fluorescence measurements of aged nanoparticles.     

Preparation and characterization of low dispersity anionic multiresponsive core-shell polymer nanoparticles

We prepared anionic multistimuli responsive core-shell polymer nanoparticles with very low size dispersity. By using either acrylic acid (AA) or methacrylic acid (MA) as a comonomer in the poly(N-isopropyl acrylamide) (PNIPAM) shell, we are able to change the distribution of negative charges in the nanoparticle shell. The particle size, volume phase transition temperature, and aggregation state can be modulated using temperature, pH, or ionic strength, providing a very versatile platform for applications in sensors, medical diagnostics, environmental remediation, etc. The nanoparticles have a glassy poly(methyl methacrylate) (PMMA) core of ca. 40 nm radius and a cross-linked PNIPAM anionic shell with either AA or MA comonomers. The particles, p(N-AA) and p(MA-N), respectively, have the same total charge but different charge distributions. While the p(MA-N) particles have the negative charges preferentially distributed toward the inner shell, in the case of the p(N-AA) particles the charge extends more to the particle outer shell. The volume phase transition temperature (T(VPT)) of the particles is affected by the charge distribution and can be fine-tuned by controlling the electrostatic repulsion on the particle shell (using pH and ionic strength). By suppressing the particle charge we can also induce temperature-driven particle aggregation.     

Preparation of cross-linked guar gum nanospheres containing tamoxifen citrate by single step emulsion in situ polymer cross-linking method

In the present work, guar gum nanospheres containing tamoxifen citrate (TC) were prepared and characterized for using it as a carrier for targeted drug delivery. Tamoxifen is a non steroidal drug used in the treatment of breast cancer. The compound administered to patients is the citrate salt of the trans isomer, tamoxifen citrate. Single step emulsion in situ polymer crosslinking technique was employed to prepare polymer coated drug nanoparticles. Model polymer used in this study was guar gum, which is commonly used for colon specific drug delivery in the pharmaceutical industry. During preparation four-different drug loading solvents were tried and dichloromethane provided the best drug loading result. Briefly, 5 mg drug was dissolved in dichloromethane and emulsified with an aqueous solution of guar gum using span 80 as emulsifier. Cross-linking was made by the use of cross linker glutaraldehyde during the process. A core shell type particles were observed. Drug load was confirmed by FT-IR and quantitated by HPLC. Nanoparticles were further characterized for particle size and morphology. Particle size between 200 and 300 nm were obtained. Influence of process variables on the size of nanoparticles were studied. It was observed that the concentration of polymer and stabilizer determined the size of nanoparticles.     

微乳液法制备纳米粒子

介绍了W／O型微乳液内超细颗粒的形成机理、制备的技术关键，综述了近年来国内外微乳法制备纳米粒子的最新进展。引用文献37篇。     

Preparation of nanocomposites consisting of an epoxyamine polymer matrix with silver nanoparticles

A promising method is presented for the preparation of polymer composites in situ containing stabilized silver nanoparticles without the use of additional reducing systems. The effects of functionality and the structure of the epoxyamine polymer matrices on their capacity to reduce silver ions and stabilize growing silver nanoparticles were evaluated.     

Preparation of magnetic polymer particles with nanoparticles of Fe(0)

Iron nanoparticles (Fe(0)), were encapsulated into polymethyl methacrylate (PMMA), by means of emulsion polymerization techniques in a semicontinuous process. The final average diameter of the composite particle was calculated until three times of average particle of iron particles and were stabilized with a non-ionic surfactant. They were then characterized by scanning electron microscopy and dynamic light scattering. Their magnetic properties were determined by parallel field vibrating-sample magnetometry method. The results indicated that the magnetic properties are a function of polymer concentration in the nanocomposite particle.     

Preparation and properties of thermosensitive hydrogel microcapsules

Temperature-sensitive hydrophilic gel microcapsules have been newly prepared. That is, poly ( -lysineisopropylamide–terephthalic acid) microcapsules containing water have been obtained by an interfacial polymerization at a water/oil interface between -lysineisopropylamide and terephthaloyldichloride. The microcapsule changes its size between 33 and 35°C. Under 33°C, the microcapsules are fully spherical and can be redispersed in distilled water, while are aggregated above 35°C. The microcapsules, which are observed to show aggregation above 33°C, can be redispersed by decreasing temperature within a few second. The thermosensitive morphological changes of the microcapsules are thus reversible. Also, it has been shown that the permeability of sodium chloride through the microcapsule membrane changes remarkably between 33 and 35°C, while it is kept almost constant independent of temperature between 25 and 33°C or between 35 and 55°C. The permeability of solutes is higher under 33°C than that above 35°C. Such thermosensitive properties result from the fact that the polymer membrane has isopropylamide groups. That is, -lysineisopropylamide has a chemical structure similar to N-isopropylacrylamide, the polymer of which, poly (N-isopropylacrylamide), is a thermosensitive hydrogel having its phase transition temperature around 33°C.     

Preparation of the stabilized glycoenzymes by cross-linking their carbohydrate chains

Each of the three high-mannose type glycoproteins studied, acid phosphatase, invertase, and glucose oxidase, could be specifically cross-linked through its carbohydrate chains. The procedure involves periodate oxidation of carbohydrate residues followed by reaction of the generated aldehyde groups with adipic acid dihydrazide as a cross-linker. The amount and size as well as solubility of the formed polymers could be efficiently controlled by varying the reaction conditions, i.e., the oxidation degree and the concentrations of glycoproteins, cross-linker, and hydrogen ions during the cross-linking reaction. It was found that the quantity and size of polymers increased with oxidation degree and protein concentration and by lowering the pH. When the protein concentration was above and pH below certain values, depending on the glycoenzyme, insoluble polymers formed. The soluble cross-linked polymers retained a high level of original activity, and the minor decrease in specific activity noticed was shown to occur during the periodate oxidation step. The cross-linked glycoenzymes are much more resistant to denaturation by high temperature and by changes in pH, demonstrating the usefulness of this method in preparation of the stabilized glycoprotein derivatives.     

Synthesis and functional properties of thermosensitive polymer derivatives of proteins

N,N-Diethylacrylamide-N-acryloylphthalimide copolymers have been synthesized. The LCST of the synthesized copolymers decreases with increase in both the molecular mass of the copolymers and the content of more hydrophobic N-acryloylphthalimide units. Through the reaction of the copolymers with the proteinase enzyme inhibitor, ovomucoid, the polymer derivatives of protein have been prepared. It has been shown that the biological activity of ovomucoid and the LCST of polymer derivatives increase with the amount of the immobilized ovomucoid. The effect of biologically active media on the LCST values of polymer derivatives has been studied.     

Photochemical switching of the phase-transition temperatures of p-NIPAM-Pt nanoparticles thermosensitive polymer composites associated with electrodes: functional electrodes for switchable electrocatalysis

The thermosensitive poly(N-isopropylacrylamide) (p-NIPAM) is electropolymerized onto Au surfaces. The incorporation of the photoisomerizable N-carboxyethyl nitrospiropyran compound into p-NIPAM allows the reversible photochemical control of the gel-to-solid phase-transition temperatures of the polymer. Whereas the gel-to-solid phase-transition temperature of the nitrospiropyran-modified p-NIPAM is 33±2 °C, the phase-transition temperature of the nitromerocyanine-functionalized p-NIPAM matrix corresponds to 38±1 °C. Upon the incorporation of Pt nanoparticles (NPs) into the photochemically controlled p-NIPAM, a hybrid photoswitchable electrocatalytic matrix is formed. At a fixed temperature corresponding to 38 °C, the effective electrocatalytic reduction of H(2)O(2), or the oxidation of ascorbic acid, proceeded in the presence of the nitromerocyanine-functionalized p-NIPAM, yet these electrocatalytic transformations were inhibited in the presence of the nitrospiropyran-modified p-NIPAM.