Synergistic effects of negative-charged nanoparticles assisted by ultrasound on the reversal multidrug resistance phenotype in breast cancer cells

We have fabricated a negative-charged nanoparticle (Heparin-Folate-Tat-Taxol NP, H-F-Tat-T NP) with dual ligands, tumor targeting ligand folate and cell-penetrating peptide Tat, to deliver taxol presenting great anticancer activity for sensitive cancer cells, while it fails to overcome multidrug resistance (MDR) in MCF-7/T cells (taxol-resistant breast cancer cells). Ultrasound (US) can increase the sensitivity of positive-charged NPs thereby making it possible to reverse MDR through inducing NPs’ drug release. However, compared with the negative-charged NPs, positive-charged NPs may cause higher toxic effect. Hence, the combination of negative-charged NPs and US may be an efficient strategy for overcoming MDR. The conventional procedure to treat with NPs followed by US exposure possibly destruct multifunctional NPs resulting in its bioactivity inhibition. Herein, we have further improved the operating approach to eliminate US mechanical damage and keep the integrity of negative-charged NPs: cells are exposed to US with microbubbles (MBs) prior to the treatment of H-F-Tat-T NPs. Superior to the conventional method, US sonoporation affects the physiological property of cancer cells while preventing direct promotion of drug release from NPs. The results of the present study displayed that US in condition (1 MHz, 10% duty cycle, duration of 80 s, US intensity of 0.6 W/cm² and volume ratio of medium to MBs 20:1) combined with H-F-T-Tat-T NPs can achieve optimal reversal MDR effect in MCF-7/T cells. Mechanism study further disclosed that the individual effect of US was responsible for the enhancement of cell membrane permeability, inhibition of cell proliferation rate and down-regulation of MDR-related genes and proteins. Simultaneously, US sonoporation on resistant cancer cells indirectly increased the accumulation of NPs by inducing endosomal escape of negative-charged NPs. Taken together, the overcoming MDR ability for the combined strategy was achieved by the synergistic effect from individual function of NPs, physiological changes of resistant cancer cells and behavior changes of NPs caused by US.     

Targeted sonocatalytic cancer cell injury using avidin-conjugated titanium dioxide nanoparticles

In this study, we applied sonodynamic therapy to cancer cells based on the delivery of titanium dioxide (TiO₂) nanoparticles (NPs) modified with avidin protein, which preferentially discriminated cancerous cells from healthy cells. Subsequently, hydroxyl radicals were generated from the TiO₂ NPs after activation by external ultrasound irradiation (TiO₂/US treatment). Although 30% of the normal breast cells (human mammary epithelial cells) exhibited the uptake of avidin-modified TiO₂ NPs, over 80% of the breast cancer cells (MCF-7) exhibited the uptake of avidin-TiO₂ NPs. Next the effect of the TiO₂/US treatment on MCF-7 cell growth was examined for up to 96 h after 1-MHz ultrasound was applied (0.1 W/cm², 30 s) to cells that incorporated the TiO₂ NPs. No apparent cell injury was observed until 24 h after the treatment, but the viable cell concentration declined to 68% compared with the control at 96 h.     

Structural characterization and X-ray analysis by Williamson–Hall method for Erbium doped Aluminum Nitride nanoparticles,synthesized using inert gas condensation technique

We have synthesized AlN nanoparticles (NPs) doped in-situ with Er (AlN:Er) using inert gas condensation technique. Using x-ray diffraction (XRD) peak broadening analysis with the Williamson–Hall (W–H) Uniform Deformation Model (UDM) the crystallite size of the NPs and the strain in NPs were found to be 80±38 nm and 3.07×10⁻³±0.9×10⁻³ respectively. In comparison, using the Debye–Scherrer's (DS) formula, we have inferred that the crystallite size of the NPs was 23±6 nm and the average strain was 4.3×10⁻³±0.4×10⁻³. The scanning electron microscopy images show that the NPs are spherical and have an average diameter of ∼300 nm. The crystallite size is smaller than the size of the NPs revealing their polycrystalline behavior. In addition, the NPs strain, stress and energy density were also calculated using W–H analysis combined with the Uniform Deformation Stress Model (UDSM) and the Uniform Deformation Energy Density Model (UDEDM). Suggested by the spherical geometry and polycrystalline nature of the AlN NPs, the strain computed from UDM, UDSM and UDEDM were in agreement confirming an isotropic mechanical nature of the particle. Luminescence measurements revealed the temperature dependence of the optical emission of the Er³⁺ ions, confirming the use of AlN:Er NPs for nano-scale temperature sensing.     

Determination of Paracetamol Based on its Quenching Effect on the Photoluminescence of CdTe Fluorescence Probes

L-Cysteine capped CdTe nanoparticles (NPs) were synthesized in aqueous medium, and their application as fluorescence probes in the determination of paracetamol was studied. The L-cysteine capped CdTe NPs were characterized by transmission electron microscopy, X-ray diffraction spectrometry, spectrofluorometry, ultraviolet-visible and Fourier transform infrared spectrometry. Based on the distinct fluorescence quenching of CdTe fluorescence probes in the presence of paracetamol, a simple, rapid and specific method for paracetamol determination was presented. Under optimum conditions, the relative fluorescence intensity of CdTe NPs was linearly proportional to paracetamol concentration from 1.0 × 10⁻⁸ mol/L to 1.6 × 10⁻⁷ mol/L with a detection limit of 4.2 × 10⁻⁹ mol/L. The proposed method was applied to detect paracetamol in commercial tablets with satisfactory results.     

Optimization and mechanism exploration for Escherichia coli transformed with plasmid pUC19 by the combination with ultrasound treatment and chemical method

As a basic technique of molecular cloning, bio-transformation has been successfully used in the fields of biomedicine and food processing. In this study, we established a transformation system of exogenous DNA into E. coli cells mediated by ultrasound. Under the optimal conditions (i.e. 35 °C, 40 W, 25 s, OD600 = 0.4–0.6) optimized by RSM, the transformation efficiency reached at 1.006 × 10⁷ CFU/μg DNA. The results of membrane permeability, macromolecular substance and cell structure analysis before and after ultrasound treatment showed that the damage of host cells induced by lower (40 W) ultrasound and shorter ultrasound time (25 s) was reversible, and the transformation efficiency and cell survival rate were not significantly affected under this condition. In brief, proper changes in cell membrane and cell wall were the basic conditions for host cells to uptake exogenous DNA, while, whether exogenous DNA could be replicated and expressed in cells depends on the viability of host cells.     

Hydrothermal synthesis of functionalized CdS nanoparticles and their application as fluorescence probes in the determination of uracil and thymine

A novel, sensitive, and convenient method for the determination of uracil and thymine by functionalized CdS nanoparticles (NPs) was proposed. CdS NPs were prepared by hydrothermal process and modified with thioglycollic acid (TGA) in aqueous solution. The fluorescence intensity of functionalized CdS NPs was quenched in the presence of uracil or thymine. Under optimal conditions, the relative fluorescence intensity (F₀/F) was proportional to the concentration in the range of 9.0×10^?6–1.0×10^?4 mol/L for uracil (r=0.9985) and 8.8×10^?7–1.5×10^?4 mol/L for thymine (r=0.9960). The corresponding detection limits were 9.6×10^?7 mol/L and 3.2×10^?7 mol/L, respectively. In addition, the possible quenching mechanism was also discussed.     

Single‐Cell Investigations of Silver Nanoparticle–Bacteria Interactions

Interaction of bacteria with citrate‐reduced silver nanoparticles (AgNPs) of size 25 nm ± 8.5 nm is studied using Raman spectroscopy in conjunction with plasmon resonance imaging of single bacterial cells. Distribution of isolated nanoparticles (NPs) inside Escherichia coli (ATCC 25922; E. coli) is observed by hyperspectral imaging (HSI) as a function of incubation time. Time‐dependent degradation of bacterial DNA upon incubation of AgNPs with E. coli is proven by Raman spectroscopic studies. While attachment of NPs is evident in HSI, molecular changes are evident from the surface‐enhanced Raman spectra of adsorbed DNA and its fragments. Distinct enhancement of DNA features is observed upon interaction of AgNPs and the number of such distinct features increases with incubation time, reaches a maximum, and decreases afterwards. This systematic interaction of DNA with the NPs system and its gradual chemical evolution is proven by investigating isolated plasmid DNA. A comparative Raman study with silver ions has shown that DNA features are observable only when bacteria are incubated with AgNPs. Energetics of interaction examined with microcalorimetry suggests the exothermicity of ?1.547 × 10¹⁰ cal mol^?1 for the NP–bacteria system. Specific interaction of AgNPs with exocyclic nitrogen present in the bases, adenine, guanine, and cytosine, leads to the changes in DNA.     

New issue of GaN nanoparticles solar cell

This study involves the synthesis of gallium nitride (GaN) nanoparticles (NPs) under different low temperatures using a simple chemical method. The nanoparticles are spin coated on Si substrate to fabricate the solar cell. The FESEM images obtained indicate the presence of cubic GaN nanoparticle with average diameter of 50 nm synthesized at 90 °C. The spin coating technique deposited n-GaN NPs/Si(111) produced a heterojunction solar cell with fill factor of 0.56 and conversion efficiency of 2.06%. Based on these results, this study proposes a novel low cost technique for the fabrication of GaN NPs solar cells.     

Sonocatalytic degradation of EDTA in the presence of Ti and Ti@TiO2 nanoparticles

The sonocatalytic degradation of EDTA (C₀ = 5 10⁻³ M) in aqueous solutions was studied under 345 kHz (P_ac = 0.25 W mL⁻¹) ultrasound at 22–51 °C, Ar/20%O₂, Ar or air, and in the presence of metallic titanium (Ti⁰) or core-shell Ti@TiO₂ nanoparticles (NPs). Ti@TiO₂ NPs have been obtained using simultaneous action of hydrothermal conditions (100–214 °C, autogenic pressure P = 1.0–19.0 bar) and 20 kHz ultrasound, called sonohydrothermal (SHT) treatment, on Ti⁰ NPs in pure water. Ti⁰ is composed of quasi-spherical particles (30–150 nm) of metallic titanium coated with a metastable titanium suboxide Ti₃O. SHT treatment at 150–214 °C leads to the oxidation of Ti₃O and partial oxidation of Ti⁰ and formation of nanocrystalline shell (10–20 nm) composed of TiO₂ anatase. It was found that Ti⁰ NPs do not exhibit catalytic activity in the absence of ultrasound. Moreover, Ti⁰ NPs remain inactive under ultrasound in the absence of oxygen. However, significant acceleration of EDTA degradation was achieved during sonication in the presence of Ti⁰ NPs and Ar/20%O₂ gas mixture. Coating of Ti⁰ with TiO₂ nanocrystalline shell reduces sonocatalytic activity. Pristine TiO₂ anatase nanoparticles do not show a sonocatalytic activity in studied system. Suggested mechanism of EDTA sonocatalytic degradation involves two reaction pathways: (i) sonochemical oxidation of EDTA by OH/HO₂ radicals in solution and (ii) EDTA oxidation at the surface of Ti⁰ NPs in the presence of oxygen activated by cavitation event. Ultrasonic activation most probably occurs due to the local heating of Ti⁰/O₂ species at cavitation bubble/solution interface.     

Characterization and applications of as-grown β-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles prepared by hydrothermal method

The production of low-dimensional nanoparticles (NPs) with appropriate surface modification has attracted increasing attention in biological, biochemical, and environmental applications including chemical sensing, photocatalytic degradation, separation, and purification of toxic molecules from the matrices. In this study, iron oxide NPs have been prepared by hydrothermal method using ferric chloride and urea in aqueous medium under alkaline condition (pH 9 ~ 10). As-grown low-dimensional NPs have been characterized by UV–vis spectroscopy, FT-IR, X-ray diffraction, Field emission scanning electron microscopy, Raman spectroscopy, High-resolution Transmission electron microscopy, and Electron Diffraction System. The uniformity of the NPs size was measured by the scanning electron microscopy, while the single phase of the nanocrystalline β-Fe₂O₃ was characterized using powder X-ray diffraction technique. As-grown NPs were extensively applied for the photocatalytic degradation of acridine orange (AO) and electrochemical sensing of ammonia in liquid phase. Almost 50% photo-catalytic degradation with AO was observed in the presence of UV sources (250 W) with NPs. β-Fe₂O₃ NP-coated gold electrodes (GE, surface area 0.0216 cm²) have enhanced ammonia-sensing performances in their electrical response (I–V characterization) for detecting ammonia in liquid phase. The performances of chemical sensor were investigated, and the results exhibited that the sensitivity, stability, and reproducibility of the sensor improved significantly using β-Fe₂O₃ NPs on GE surface. The sensitivity was approximately 0.5305 ± 0.02 μAcm⁻²mM⁻¹, with a detection limit of 21.8 ± 0.1 μM, based on a signal/noise ratio of 3 with short response time.     

Preparation and Characterization of CdHgTe Nanoparticles and Their Application on the Determination of Proteins

CdHgTe nanoparticles (NPs) with the emission in the near-infrared regions were prepared in aqueous solution, and were characterized by transmission electron microscopy, X-ray diffraction spectrometry, spectrofluorometry and ultraviolet-visible spectrometry. Based on the fluorescence quenching of CdHgTe NPs in the presence of proteins, a novel method for the determination of proteins with CdHgTe NPs as a near-infrared fluorescence probe was developed. Maximum fluorescence quenching was observed with the excitation and emission wavelengths of 500 and 693 nm, respectively. Under the optimal conditions, the calibration graphs were linear in the range of 0.04 × 10⁻⁶–5.6 × 10⁻⁶ g ml⁻¹ for lysozyme (Lyz) and 0.06 × 10⁻⁶–6.1 × 10⁻⁶ g ml⁻¹ for bovine hemoglobin (BHb), respectively. The limits of detection were 13 ng ml⁻¹ for Lyz and 27 ng ml⁻¹ for BHb, respectively. Four synthetic samples were determined and the results were satisfied.     

Manganese–gold nanoparticles as an MRI positive contrast agent in mesenchymal stem cell labeling

We report a straightforward approach to prepare multifunctional manganese–gold nanoparticles by attaching Mn(II) ions onto the surface of 20 nm citrate-capped gold nanoparticles. In vitro MRI measurements made in agarose gel phantoms exhibited high relaxivity (18.26 ± 1.04 mmol⁻¹ s⁻¹). Controlled incubation of the nanoparticles with mesenchymal stem cells (MSCs) was used to study cellular uptake of these particles and this process appeared to be controlled by the size of the nanoparticle aggregates in the extracellular solution. SEM images of live MSCs showed an increased concentration of particles near the cell membrane and a distribution of the size of particles within the cells. Survivability for MSCs in contact with Mn–Au NPs was greater than 97% over the 3-day period and up to the 1 mM Mn used in this study. The high relaxivity and low cell mortality are suggestive of an enhanced positive contrast agent for in vitro or in vivo applications.     

Enhanced OH radical generation by dual-frequency ultrasound with TiO2 nanoparticles: Its application to targeted sonodynamic therapy

The present study demonstrated the enhanced hydroxyl (OH) radical generation by combined use of dual-frequency (0.5 MHz and 1 MHz) ultrasound (US) and titanium dioxide (TiO₂) nanoparticles (NPs) as sonocatalyst. The OH radical generation became the maximum, when 0.5 MHz US was irradiated at an intensity of 0.8 W/cm² and 1 MHz US was irradiated at intensities at 0.4 W/cm² in the presence of TiO₂ NPs under the examined conditions. After incorporation of TiO₂ NPs modified with targeting protein pre-S1/S2, HepG2 cancer cells were subjected to the dual-frequency US at optimum irradiation intensities (“targeted-TiO₂/dual-US treatment”). Growth of the HepG2 cells was reduced by 46% compared with the control condition after irradiation of dual-frequency US for 60 s with TiO₂ NPs incorporation. In contrast, HepG2 cell growth was almost the same as that in the control condition when cells were irradiated with either 0.5 MHz or 1 MHz ultrasound alone without TiO₂ NP incorporation.     

Expandable photo-induced synthetic route to generate highly controlled noble metal nanoparticles

A photo-stimulation strategy was applied to synthesize colloidal noble-metal nanoparticles (NPs) with a highly controlling of size and morphology with high yield at room temperature. In this controlled synthesis, photoreduction of a mixture of the noble metal precursor and a chemical reducing agent under ultraviolet (UV) illumination was used to produce electrons that reduce metal ions (Au³⁺ and Ag⁺) in toluene. Prolonged UV irradiation at 365 nm at a power of 0.14 μmol S⁻¹ m⁻² induced ripening wherein the irradiation power, exposure time, and chemical interaction of the reducing and stabilizing agents were key factors in determining the nanoscale structure of the NPs. Under optimal irradiation and chemical conditions, size and shape deviations of <6% of the Au and Ag NPs were obtained.     

Folate-decorated chitosan/doxorubicin poly(butyl)cyanoacrylate nanoparticles for tumor-targeted drug delivery

A novel chitosan coated poly(butyl cyanoacrylate) (PBCA) nanoparticles loaded doxorubicin (DOX) were synthesized and then conjugated with folic acid to produce a folate-targeted drug carrier for tumor-specific drug delivery. Prepared nanoparticles were surface modified by folate for targeting cancer cells, which is confirmed by FTIR spectroscopy and characterized for shape, size, and zeta potential measurements. The size and zeta potential of prepared DOX-PBCA nanoparticles (DOX-PBCA NPs) were almost 174 ± 8.23 nm and +23.14 ± 4.25 mV, respectively with 46.8 ± 3.32% encapsulation capacity. The transmission electron microscopy study revealed that preparation allowed the formation of spherical nanometric and homogeneous. Fluorescent microscopy imaging and flow cytometry analysis revealed that DOX-PBCA NPs were endocytosed into MCF-7 cells through the interaction with overexpressed folate receptors on the surface of the cancer cells. The results demonstrate that folate-conjugated DOX-PBCA NPs drug delivery system could provide increased therapeutic benefit by delivering the encapsulated drug to the folate receptor positive cancer cells.     

Importance of poly(ethylene glycol) conformation for the synthesis of silver nanoparticles in aqueous solution

Silver nanoparticles (NPs) were prepared using silver nitrate (AgNO₃) as a precursor in an aqueous solution of poly(ethylene glycol) (PEG), which acted as both a reducing and stabilizing agent. The UV/Vis spectra showed that PEG 100 (100 kg/mol) has a remarkable capability to produce silver NPs at 80 °C, but the production of silver NPs by both PEG 2 (2 kg/mol) and PEG 35 (35 kg/mol) was negligible. This difference was explained by the conformation of PEG in the reaction solution: the entangled conformation for PEG 100 and the single-coiled conformation for PEG 2 and PEG 35, which were confirmed by pulse-field-gradient ¹H NMR and viscosity measurements. In an aqueous solution, the entangled conformation of PEG 100 facilitated the reduction reaction by caging silver ions and effectively prevented the agglomeration of formed NPs. The reaction in an aqueous PEG 100 solution was observed to be stable under the conditions of a prolonged reaction time or an increased temperature, while no reduction reaction occurred in the PEG 2 solution. The synthesis of silver NPs by PEG 100 was well controlled to produce fine silver NPs with 3.68 ± 1.03 nm in diameter, the size of which remained relatively constant throughout the reaction.     

Laser-based techniques for living cell pattern formation

In the production of biosensors or artificial tissues a basic step is the immobilization of living cells along the required pattern. In this paper the ability of some promising laser-based methods to influence the interaction between cells and various surfaces is presented. In the first set of experiments laser-induced patterned photochemical modification of polymer foils was used to achieve guided adherence and growth of cells to the modified areas: (a) Polytetrafluoroethylene was irradiated with ArF excimer laser (λ=193 nm, FWHM=20 ns, F=9 mJ/cm²) in presence of triethylene–tetramine liquid photoreagent; (b) a thin carbon layer was produced by KrF excimer laser (λ=248 nm, FWHM=30 ns, F=35 mJ/cm²) irradiation on polyimide surface to influence the cell adherence. It was found that the incorporation of amine groups in the PTFE polymer chain instead of the fluorine atoms can both promote and prevent the adherence of living cells (depending on the applied cell types) on the treated surfaces, while the laser generated carbon layer on polyimide surface did not effectively improve adherence. Our attempts to influence the cell adherence by morphological modifications created by ArF laser irradiation onto polyethylene–terephtalate surface showed a surface–roughness dependence. This method was effective only when the Ra roughness parameter of the developed structure did not exceed the 0.1 micrometer value. Pulsed laser deposition with femtosecond KrF excimer lasers (F=2.2 J/cm²) was effectively used to deposit structured thin films from biomaterials (endothelial cell growth supplement and collagen embedded in starch matrix) to promote the adherence and growth of cells. These results present evidence that some surface can be successfully altered to induce guided cell growth.     

Coarsening phenomena of metal nanoparticles and the influence of the support pre-treatment: Pt/TiO2(110)

One of the technologically most important requirements for the application of oxide-supported metal nanoparticles (NPs) in the fields of molecular electronics, plasmonics, and catalysis is the achievement of thermally stable systems. For this purpose, a thorough understanding of the different pathways underlying thermally-driven coarsening phenomena, and the effect of the nanoparticle synthesis method, support morphology, and degree of support reduction on NP sintering is needed. In this study, the sintering of supported metal NPs has been monitored via scanning tunneling microscopy combined with simulations following the Ostwald ripening and diffusion-coalescence models. Modifications were introduced to the diffusion-coalescence model to incorporate the correct temperature dependence and energetics. Such methods were applied to describe coarsening phenomena of physical-vapor deposited (PVD) and micellar Pt NPs supported on TiO₂(110). The TiO₂(110) substrates were exposed to different pre-treatments, leading to reduced, oxidized and polymer-modified TiO₂ surfaces. Such pre-treatments were found to affect the coarsening behavior of the NPs.No coarsening was observed for the micellar Pt NPs, maintaining their as-prepared size of ~ 3 nm after annealing in UHV at 1060 °C. Regardless of the initial substrate pre-treatment, the average size of the PVD-grown NPs was found to increase after identical thermal cycles, namely, from 0.5 ± 0.2 nm to 1.0 ± 0.3 nm for pristine TiO₂, and from 0.8 ± 0.3 nm to 1.3 ± 0.6 nm for polymer-coated TiO₂ after identical thermal treatments. Although no direct real-time in situ microscopic evidence is available to determine the dominant coarsening mechanism of the PVD NPs unequivocally, our simulations following the diffusion-coalescence coarsening route were in significantly better agreement with the experimental data as compared to those based on the Ostwald-ripening model. The enhanced thermal stability of the micellar NPs as compared to the PVD clusters might be related to their initial larger NP size, narrower size distribution, and larger interparticle distances.     

Ultrasonication-aided synthesis of nanoplates-like iron molybdate: Fabricated over glassy carbon electrode as an modified electrode for the selective determination of first generation antihistamine drug promethazine hydrochloride

The innovation of novel and proficient nanostructured materials for the precise level determination of pharmaceuticals in biological fluids is quite crucial to the researchers. With this in mind, we synthesized iron molybdate nanoplates (Fe₂(MoO₄)₃; FeMo NPs) via simple ultrasonic-assisted technique (70 kHz with a power of 100 W). The FeMo NPs were used as the efficient electrocatalyst for electrochemical oxidation of first-generation antihistamine drug- Promethazine hydrochloride (PMH). The as-synthesized FeMo NPs were characterized and confirmed by various characterization techniques such as XRD, Raman, FT-IR, FE-SEM, EDX and Elemental mapping analysis and electron impedance spectroscopy (EIS). In addition, the electrochemical characteristic features of FeMo NPs were scrutinized by electrochemical techniques like cyclic voltammetry (CV) and differential pulse voltammetry technique (DPV). Interestingly, the developed FeMo NPs modified glassy carbon electrode (FeMo NPs/GCE) discloses higher peak current with lesser anodic potential on comparing to bare GCE including wider linear range (0.01–68.65 µM), lower detection limit (0.01 µM) and greater sensitivity (0.97 µAµM^-1cm⁻²). Moreover, the as-synthesized FeMo NPs applied for selectivity, reproducibility, repeatability and storage ability to investigate the practical viability. In the presence of interfering species like cationic, anionic and biological samples, the oxidation peak current response doesn’t cause any variation results disclose good selectivity towards the detection of PMH. Additionally, the practical feasibility of the FeMo NPs/GCE was tested by real samples like, commercial tablet (Phenergan 25 mg Tablets) and lake water samples which give satisfactory recovery results. All the above consequences made clear that the proposed sensor FeMo NPs/GCE exhibits excellent electrochemical behavior for electrochemical determination towards oxidation of antihistamine drug PMH.     

Diamine-linked array of metal (Au,Ag) nanoparticles on glass substrates for reliable surface-enhanced Raman scattering (SERS) measurements

Metal (Au, Ag) nanoparticles (M NPs) (ca. 30–40 nm) prepared by citrate reduction method were arrayed on amine-terminated glass substrates using diamine linkers with different chain lengths. 1,4-diaminobutane (C-4 diamine) produced the uniform and densely-packed array of M NPs on glass substrates at appropriate concentration ranges, whereas diamine linkers with longer chain lengths (C-8 and C-12 diamines) produced more heterogeneous and aggregated array of M NPs. When compared to Ag NPs, Au NPs demonstrated more controllable and higher packing density due to their mono-dispersed size and higher affinity to diamine linkers. Uniformly arrayed M NPs (Au, Ag) on glass substrates exhibited high enhancement factors in SERS measurements of o-chlorothiophenol probes. Au NPs arrayed substrates exhibited an approximate power-law linearity of Raman intensity with probe concentrations (from 10⁻⁷ M to 10⁻⁴ M), demonstrating more reliable SERS substrates than Ag arrayed substrates with higher SERS activity.