强激光场中团簇Na_2的谐波产生

在时间相关的局域密度近似TDLDA理论框架下 ,研究了强激光场中最简单金属团簇Na2 高次谐波的产生。当激光参数选为强度 1.338× 10 12 W/cm2 和频率 5 .2 6 6eV时 ,在激光频率和Na2 的共振频率处成峰 ;而当强度为 5 .0 5 5× 10 12 W/cm2 ,频率为 1.12 4eV时 ,观察到了第三 ,第五次谐波产生。     

飞秒抽运随机激光输出波形的可控性研究

本文基于随机激光的时域理论,研究了飞秒脉冲抽运下二维随机激光的辐射特性,并着重讨论了抽运脉冲的峰值强度、脉宽和脉冲波形对辐射光时域波形的影响.结果表明, 辐射光的时域波形强烈依赖于抽运光脉冲的参数,通过调整抽运方式可以控制辐射光的输出波形.数值模拟结果为研究随机激光输出波形的可控性技术提供了理论依据. 关键词： 激光物理 随机激光器 飞秒抽运 脉冲波形     

Ultrafast temperature relaxation evolution in Au film under femtosecond laser pulses irradiation

Ultrafast temperature relaxation processes in Au film including two temperature relaxation and thermal diffusion relaxation with femtosecond laser pulse excitation were investigated numerically by Finite Element Method (FEM). With the temperature dependent thermal parameters, the full 2D temperature field evolution in picosecond and nanosecond domains were obtained. It is proposed that the heat transfer depth can be alternatively localized or enhanced by the distinct temperature relaxation mechanisms. Moreover, the effect of laser parameters and Au film thickness and surface reflectivity on the two temperature relaxation time were analysed.     

Nanoparticles size modifications during femtosecond laser ablation of nickel in vacuum

Nanoparticles were synthesized by irradiating a nickel target with femtosecond laser pulses in high vacuum, and subsequently analyzed. The proof-of-principle experiments aim to modify the size characteristics of the produced nanoparticles. For nickel it is found that: (i) ultraviolet laser pulses lead to a remarkable change in the nanoparticles size distribution with respect to visible laser pulses; (ii) irradiation of the femtosecond pulses induced ablation plume with a second, delayed ultraviolet laser pulse can change the size characteristics of the produced nanoparticles.     

Picosecond and femtosecond pulsed laser ablation and deposition of quasicrystals

A Nd:glass laser with pulse duration of 250 fs and 1.3 ps has been used to evaporate a Al₆₅Cu₂₃Fe₁₂ quasicrystalline target. The gaseous phase obtained from the ablation process has been characterised by several techniques such as emission spectroscopy, quadrupole mass spectrometry and ICCD imaging, used to study the plume composition, energy and morphology. The results show that the ablation processes in the short-pulse regimes are very different to the nanosecond one. In particular the plume angular distribution shows a characteristic high cosine exponent and the composition is completely stoichiometric and independent from the laser fluence. Furthermore the mass spectra indicate the presence of clusters, both neutral and ionised and the emission from the target suggest a rapid thermalisation leading to the melting of the surface. To clarify the ablation process some films have been deposited, on oriented silicon, at different experimental conditions and analysed by scanning electron microscopy, atomic force microscopy, energy dispersive X-ray analysis and X-ray diffraction. The analyses show the presence of nanostructured films retaining the target stoichiometry but consisting of different crystalline and non crystalline phases. In particular the nanostructure supports the hypothesis of the melting of the target during the ablation and a mechanism of material ejection is proposed for both picosecond and femtosecond regimes.     

Talbot effect under illumination of double femtosecond laser pulses

The Talbot effect under illumination of double femtosecond laser pulses has been reported. Spectrums of double femtosecond laser pulses with phase differences are quite different from that of one single femtosecond laser pulse. Therefore, the Talbot images of the double femtosecond laser pulses with phase differences are different from that of one single femtosecond laser pulse. Specifically, for the phase difference corresponding to π, the Talbot image shows the largest difference from that of one single pulse. Experimental results are in good agreement with the theoretical analysis. The behaviors of Talbot images under double femtosecond laser pulses illumination cannot be obtained under one femtosecond laser pulse, monochromatic or polychromatic light illumination. Therefore, it is a new interesting optical phenomenon for the Talbot effect which should have potential applications.     

激光辐照下杂质诱导光学玻璃损伤的两种机理

基于空间球对称热弹性理论,从热传导、热应力方程出发,计算了含强吸收杂质Pt的石英和K9玻璃在激光脉冲辐照下的温升场和应力分布,同时考虑杂质强吸收汽化相变行为,发现含强吸收杂质的光学玻璃的激光损伤,主要是由于温度梯度引起的热应力和杂质汽化蒸汽压的作用的结果。由于不同的热物理和力学性质,当杂质没有汽化时,石英玻璃中的热应力不会达到断裂强度,杂质汽化产生的压力是石英玻璃破坏的主要原因;对K9玻璃,即使杂质没有达到汽化温度,K9玻璃中的温度梯度产生的热应力也会超过其抗压强度而导致破裂,杂质汽化后的蒸汽压增大了破坏的程度。此外,分析了杂质颗粒大小对材料激光损伤阈值的影响,发现存在一个最有害的颗粒尺寸,含该颗粒尺寸杂质的材料激光损伤阈值最低。     

飞秒脉冲激光1维强度调制的传输特性

实验研究了飞秒激光干涉条纹在CS2介质中传输的增长率与条纹间隔以及增长率与中心峰值强度的关系。结果发现,在非线性介质中传输的1维干涉调制特别是当其调制频率位于中心光强对应的最快增长频率附近时,随着传输距离的增加调制场迅速获得增长,将高斯光束分裂成多根峰值强度很高的带状细丝。相应的数值模拟与实验结果具有较好的一致性。     

飞秒脉冲激光1维强度调制的传输特性

实验研究了飞秒激光干涉条纹在CS2介质中传输的增长率与条纹间隔以及增长率与中心峰值强度的关系。结果发现,在非线性介质中传输的１维干涉调制特别是当其调制频率位于中心光强对应的最快增长频率附近时,随着传输距离的增加调制场迅速获得增长,将高斯光束分裂成多根峰值强度很高的带状细丝。相应的数值模拟与实验结果具有较好的一致性。     

飞秒激光脉冲在正色散固体材料中的自压缩

实验研究了正色散固体介质中的激光脉冲自压缩现象,证明了无需任何外加色散补偿情况下，固体透明介质中的自聚焦传输过程可使高功率飞秒激光脉冲实现时域脉冲压缩，并详细研究了输出脉冲的时域和频域特性随入射脉冲强度的演化规律.实验结果表明脉冲自压缩量随入射脉冲强度的增加呈递增趋势，然而当入射光强增大到足以引起超连续谱及锥形辐射产生时，脉冲时域形状会发生分裂.此外还发现发散光束入射情况下同样可以观察到脉冲自压缩现象. 关键词： 超短激光脉冲 脉冲压缩 非线性传输     

飞秒纳秒脉冲激光微构造和掺杂单晶硅

在SF6气氛下,分别利用钛宝石飞秒脉冲激光与掺钕钇铝石榴石纳秒脉冲激光对单晶硅表面进行了微构造和重掺杂,以用于光伏材料。对制备的单晶硅表面微结构的形貌、结晶性和硫元素杂质含量与分布进行了研究。实验结果表明纳秒脉冲激光制备的单晶硅表面微结构的薄层电阻较小,缺陷密度较低（结晶性高）,硫元素杂质含量较高且在表面分布的范围较广,深度较大（约1 m）。此外,材料的可见-近红外波段吸收率可接近80%。基于纳秒脉冲激光微构造的单晶硅的优异性能,在样品表面制备了有效光照面积达8 cm2的太阳能电池。其中,最佳太阳能电池的串联电阻、开路电压、短路电流密度分别为0.5 , 503 mV, 35 mA/cm2,转换效率约12%。上述太阳能电池性能还可通过优化制备工艺进一步提高。     

Surface damage threshold and structuring of dielectrics using femtosecond laser pulses: the role of incubation

We present results on the surface damage threshold of a-SiO₂ and YLF after single and multiple laser pulse irradiation at a pulse duration of 100 fs and radiation wavelength of 800 nm. The surface damage threshold drops dramatically after the first laser shots until reaching an almost constant level. The threshold reduction at low shot numbers is attributed to laser induced defect formation. This has important consequences for applications, such as laser machining and the lifetime of optical components. As an example of relevance to applications, we discuss the generation of high quality micro pockets in a-SiO₂ and YLF.     

高强度飞秒激光脉冲在空气中的自压缩

利用高重复频率（1kHz）、吉瓦级飞秒激光脉冲实验验证了高强度飞秒脉冲在空气中的自 压缩现象，研究了入射脉冲在不同初始啁啾情况下经空气中聚焦成丝后，时域及频域特性随 入射脉冲能量的变化规律.实验结果表明，在无需后继色散补偿情况下，高强度飞秒脉冲仅 通过在空气中的非线性传输过程就可以实现脉冲压缩；在入射脉冲为负啁啾情况下，实验观 察到脉冲光谱及时域宽度同时得到压缩，并可获得比激光源所能提供的更短的近双曲正割型 变换限脉冲. 关键词： 高强度飞秒激光脉冲 自压缩 自聚焦     

Fabrication of micro-gratings on Au-Cr thin film by femtosecond laser interference with different pulse durations

We encoded surface relief micro-gratings on Au-Cr thin films using two-beam interference of femtosecond laser pulses with the durations from 25 fs to 70 fs. The dependence of the fabrication quality on the pulse duration has been investigated both numerically and experimentally. The results revealed that the shorter pulses were preferable to prepare periodical microstructures with minimal ablation fringe width and satisfied fabrication quality. This work has potential applications on periodic functional microstructures fabrication for ultra-fine processing and modification on various materials, especially for intractable materials.     

超短脉冲超强激光与固体靶相互作用中高能离子的产生

 用2D3V PIC粒子模拟方法得到了超短脉冲超强激光与固体靶相互作用中高能离子产生的图像，并对其机理进行了研究。在靶前后表面都观察到了高能离子的产生，并诊断了离子能谱。模拟结果表明，在靶前表面所产生的高能离子，角分布较大，在向靶内输运过程中会损失能量；在靶后表面产生的高能离子，定向性很好，能获得很高的能量。模拟得到的离子能量和实验观测结果在量级上相符。     

等离子屏蔽效应下飞秒激光照射金箔的分子动力学模拟

采用耦合了双温度模型的分子动力学方法对飞秒激光烧蚀金箔的传热过程进行了模拟研究,考虑了非傅里叶效应,探究了不同激光能流密度下等离子体羽流的屏蔽作用.根据密度分布将激光烧蚀过程中的金箔划分为过热液体层、熔融液体层和固体层,并比较了不同激光能量密度下过热液体层表面发生的相爆炸沸腾现象以及表面温度的变化情况.结果表明,随着激光能量密度的增大,等离子体的屏蔽比例几乎呈线性增大.在激光的烧蚀过程中,金箔的上表面最先经历液体层以及过热液体层,并且随着时间的推移,液体层和过热液体层逐渐向金箔底部移动.过热液体层发生体积移除的相爆炸沸腾是金箔烧蚀的主要方式,随着激光能量的增大,爆炸沸腾发生的时间提前,并且结束的时间相应延后,持续时间变长.     

飞秒激光辐照下单晶硅薄膜中超快能量输运的数值模拟

利用载流子输运模型对飞秒激光辐照下单晶硅亚微米薄膜中的能量输运过程进行数值模拟。研究了不同辐照能量密度和不同激光波长对载流子密度和温度超快变化过程的影响规律。结果表明,在800nm激光辐照下,不同入射能量密度仅影响载流子密度和温度响应的峰值,但达到峰值的时刻不变。平衡态的恢复过程受入射能量密度影响很小。在不同波长激光辐照下,光子能量越大,载流子密度和温度达到峰值所用时间越短,对应峰值越大,但衰减速度也越快。当入射光子能量大于单晶硅的直接带隙时,快速衰减时间常数可以与载流子能量弛豫时间相当。     

高功率飞秒脉冲激光器的进展

概述了超短激光脉冲技术发展的历程。详尽的论述了啁啾脉冲放大技术的原理和一些关键技术 ,并对当今飞秒激光器研究发展的状况进行了综述。在分析其应用前景的基础上 ,进一步指出了这一技术领域未来的发展趋势。结果表明 ,脉冲激光放大系统以后的发展方向是 :更短脉冲 ;追求更高峰值功率 ;连续光谱调谐化 ;向小型化乃至全光纤化发展。     

Bimodal temporal distribution of photons in ultrashort laser pulse passed through a turbid medium

The criteria were determined for simultaneous observation of scattered and unscattered (ballistic) peaks in temporal distribution of a narrow pulsed laser beam passed through a strongly scattering medium. Conditions were found for such an observation on the basis of non-stationary two-flux model for radiation transport. Calculation results permitted the definition of a compromise between the parameters of the initial laser pulse and the properties of a scattering medium. This provided the separate observation of various types of photons. The theoretical calculations were confirmed by experiments on recording pulse profiles of passed radiation of fs-laser in a water–milk solution.     

飞秒强激光脉冲在等离子体中的自压缩

文章从激光等离子体相互作用的非线性薛定谔方程出发,理论研究了飞秒强激光脉冲在等离子体中的自压缩行为.结果表明在一定范围内随着激光脉冲宽度、激光强度的增大以及等离子体密度的减小,飞秒强激光脉冲在等离子体中传播的自压缩现象越明显.另外通过适当设定参量得到了近似稳定传播的基孤子.