Biomimetic Hydrogenation Catalyzed by a Manganese Model of [Fe]‐Hydrogenase

[Fe]‐hydrogenase is an efficient biological hydrogenation catalyst. Despite intense research, Fe complexes mimicking the active site of [Fe]‐hydrogenase have not achieved turnovers in hydrogenation reactions. Herein, we describe the design and development of a manganese(I) mimic of [Fe]‐hydrogenase. This complex exhibits the highest activity and broadest scope in catalytic hydrogenation among known mimics. Thanks to its biomimetic nature, the complex exhibits unique activity in the hydrogenation of compounds analogous to methenyl‐H₄MPT⁺, the natural substrate of [Fe]‐hydrogenase. This activity enables asymmetric relay hydrogenation of benzoxazinones and benzoxazines, involving the hydrogenation of a chiral hydride transfer agent using our catalyst coupled to Lewis acid‐catalyzed hydride transfer from this agent to the substrates.     

Muonium Chemistry at Diiron Subsite Analogues of [FeFe]‐Hydrogenase

The chemistry of metal hydrides is implicated in a range of catalytic processes at metal centers. Gaining insight into the formation of such sites by protonation and/or electronation is therefore of significant value in fully exploiting the potential of such systems. Here, we show that the muonium radical (Mu^.), used as a low isotopic mass analogue of hydrogen, can be exploited to probe the early stages of hydride formation at metal centers. Mu^. undergoes the same chemical reactions as H^. and can be directly observed due to its short lifetime (in the microseconds) and unique breakdown signature. By implanting Mu^. into three models of the [FeFe]‐hydrogenase active site we have been able to detect key muoniated intermediates of direct relevance to the hydride chemistry of these systems.     

Current State of [Fe]-Hydrogenase and Its Biomimetic Models

[Fe]-hydrogenase, the third type of natural hydrogenase, is capable to heterolytically activate hydrogen molecule and transfer the resulting hydride to an unsaturated substrate, making it a promising hydrogenation catalyst. Over the last three decades, fruitful results on this enzyme have been achieved. In this review, we have summarized the major progresses about this enzyme including its structural characterisation, catalytic mechanism, cofactor biosynthesis, mimetic model development as well as artificial enzymes construction. In the meanwhile, challenges and opportunities of this enzyme and its mimetic systems in the application of synthetic chemistry and others are discussed.     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

Fe3O4@MCM-48–SO3H:合成苯并[f]色烯并[2,3-d]嘧啶酮的高效、可磁性分离纳米催化剂（英文）

Sulfonic acid groups were grafted onto three different types of synthesized magnetic nanoparticles, namely Fe3O4, Fe3O4@SiO2, and Fe3O4@MCM‐48. The sulfonic acid‐functionalized nanoparticles were evaluated as catalysts for the synthesis of 5‐aryl‐1H‐benzo[f]chromeno[2,3‐d]pyrimidine‐2,4(3H,5H)‐dione derivatives in terms of activity and recyclability. Their catalytic activities were compared with that of the homogeneous acid catalyst 1‐methylimidazolium hydrogen sulfate ([HMIm][HSO4]). The activity of Fe3O4@MCM‐48–SO3H was comparable to those of the other heter‐ogeneous and homogeneous catalysts.     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

Fe3O4@MCM-48-SO3H:An efficient magnetically separable nanocatalyst for the synthesis of benzo[f]chromeno[2,3-d]pyrimidinones

Sulfonic acid groups were grafted onto three different types of synthesized magnetic nanoparticles, namely Fe3O4, Fe3O4@SiO2, and Fe3O4@MCM‐48. The sulfonic acid‐functionalized nanoparticles were evalu...     

One‐pot Combinatorial Synthesis of Benzo[4,5]imidazo‐[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one Derivatives

A series of novel fused tetracyclic benzo[4,5]imidazo[1,2‐a]thiopyrano[3,4‐d]pyrimidin‐4(3H)‐one derivatives were synthesized via the reaction of aryl aldehyde, 2H‐thiopyran‐3,5(4H,6H)‐dione, and 1H‐benzo[d]imidazol‐2‐amine in glacial acetic acid. This protocol features mild reaction conditions, high yields and short reaction time.     

Synthesis and Biological Activities of 7‐Arylazo‐7H‐pyrazolo[5,1‐c][1,2,4] Triazol‐6(5H)‐Ones and 7‐Arylhydrazono‐7H‐[1,2,4]triazolo[3,4‐b] [1,3,4]thiadiazines

Two series of 7‐arylazo‐7H‐3‐(2‐methyl‐1H‐indol‐3‐yl)pyrazolo[5,1‐c][1,2,4]triazol‐6(5H)‐ones 4 and 7‐arylhydrazono‐7H‐3‐(2‐methyl‐1H‐indol‐3‐yl)‐[1,2,4]triazolo[3,4‐b][1,3,4]thiadiazines 7 were prepared via reactions of 4‐amino‐3‐mercapto‐5‐(2‐methyl‐1H‐indol‐3‐yl)‐1,2,4‐triazole 1 with ethyl arylhydrazono‐chloroacetate 2 and N‐aryl‐2‐oxoalkanehydrazonoyl halides 5 , respectively. A possible mechanism is proposed to account for the formation of the products. The biological activity of some of these products was also evaluated.     

Synthesis of pyrano[2,3‐c]pyrazole derivatives using Fe3O4@SiO2@piperidinium benzene‐1,3‐disulfonate (Fe3O4@SiO2 nanoparticle‐supported IL) as a novel,green and heterogeneous catalyst

A simple, green and efficient protocol for the one‐pot four‐component synthesis of pyrano[2,3‐c ]pyrazole derivatives produced from reaction between aryl aldehydes, ethyl acetoacetate, malononitrile and hydrazine hydrate in the presence of nano magnetic piperidinium benzene‐1,3‐disulfonate was synthesized in water at 60 °C. The Fe₃O₄@SiO₂ nanoparticle‐supported IL was designed and synthesized. The present process offers advantages such as clean reaction, short reaction time, good to excellent yield, easy purification and easy recoverable catalyst.     

ZrOCl2·8H2O as an efficient and recyclable catalyst for the one‐pot multicomponent synthesis of novel [1,3]oxazino[5,6‐c]quinolin‐5‐one derivatives

A simple, efficient and eco‐friendly procedure has been developed using ZrOCl₂·8H₂O as catalyst for the synthesis of novel [1,3]oxazino[5,6‐c]quinolin‐5‐one derivatives in aqueous ethanol at room temperature. The present methodology offers several advantages such as operational simplicity, use of ZrOCl₂·8H₂O as a green, non‐toxic, inexpensive and reusable catalyst, reusability of reaction media, high yields, mild and environmentally benign reaction conditions.     

γ‐Fe2O3@Cu3Al‐LDH‐TUD as a new Amphoteric,Highly Efficient and Recyclable Heterogeneous Catalyst for the Solvent‐free Synthesis of Dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens

Thiourea dioxide was immobilized on γ‐Fe₂O₃@Cu₃Al‐LDH magnetic nanoparticles to prepare the γ‐Fe₂O₃@Cu₃Al‐LDH‐TUD MNPs. The structure and properties of these magnetic nanoparticles were established by FT‐IR, EDX, SEM, XRD, and hystogram of particle size analytical methods. The results obtained from these analytical methods confirmed the successful immobilization of the thiourea dioxide onto the magnetic support. The synthesized magnetic nanoparticles (MNPs) exhibited high catalytic activity in one‐pot three‐component reactions under mild and solvent‐free conditions for the synthesis of diverse ranges of dihydropyrano[3,2‐c]pyrazoles and dihydropyrano[3,2‐c]chromens. All the reactions proceeded smoothly to furnish the respective products in excellent yields. Simple isolation of the products, avoidance of harmful organic solvents, versatility of the catalyst and its easy magnetic separation and reusability with no significant loss of activity are the main advantages of the present method.     

A Facile One‐Pot Synthesis of Functionalized 1,5‐Dihydro‐2H‐[1]benzopyrano[2,3‐b]pyridin‐5‐ones

The highly reactive 1 : 1 intermediate generated in the reaction between dialkyl acetylenedicarboxylate (=but‐2‐ynedioic acid dialkyl ester) 4 and triphenylphosphine was trapped by 2‐amino‐4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehydes 5 to yield highly functionalized dialkyl‐1,5‐dihydro‐5‐oxo‐1‐phenyl‐2H‐[1]benzopyrano[2,3‐b]pyridine‐2,3‐dicarboxylates in high yield.     

The Bacterial [Fe]‐Hydrogenase Paralog HmdII Uses Tetrahydrofolate Derivatives as Substrates

[Fe]‐hydrogenase (Hmd) catalyzes the reversible hydrogenation of methenyl‐tetrahydromethanopterin (methenyl‐H₄MPT⁺) with H₂. H₄MPT is a C1‐carrier of methanogenic archaea. One bacterial genus, Desulfurobacterium, contains putative genes for the Hmd paralog, termed HmdII, and the HcgA–G proteins. The latter are required for the biosynthesis of the prosthetic group of Hmd, the iron–guanylylpyridinol (FeGP) cofactor. This finding is intriguing because Hmd and HmdII strictly use H₄MPT derivatives that are absent in most bacteria. We identified the presence of the FeGP cofactor in D. thermolithotrophum. The bacterial HmdII reconstituted with the FeGP cofactor catalyzed the hydrogenation of derivatives of tetrahydrofolate, the bacterial C1‐carrier, albeit with low enzymatic activities. The crystal structures show how Hmd recognizes tetrahydrofolate derivatives. These findings have an impact on future biotechnology by identifying a bacterial Hmd paralog.     

One‐pot Sequential Reactions Featuring a Copper‐catalyzed Amination Leading to Pyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines and Dihydropyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines

Tetracyclic skeletons combining an imidazo[1,2‐a]pyridine moiety with a quinoline framework such as pyrido[2′,1′:2,3]imidazo[4,5‐b]quinoline are stimulating increasing interests since they are close isosteres of a series of powerful antiproliferative compounds. In this paper, we report a novel methodology for the synthesis of pyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines through one‐pot sequential reactions of commercially available or readily obtainable 2‐aminopyridines, 2‐bromophenacyl bromides, aqueous ammonia, and aldehydes. Moreover, dihydropyrido[2′,1′:2,3]imidazo[4,5‐c]quinolines could also be obtained in a similar manner by using various ketones as the substrates in place of aldehydes. Notably, the whole procedure combines condensation/amination/cyclization reactions in one pot to give complex compounds in a simple and practical manner. Compared with literature methods, the synthetic strategy reported herein has the advantages of readily available starting materials, structural diversity of products, good functional group tolerance, and obviation of step‐by‐step operations.     

Application to Photocatalytic H2 Production of a Whole‐Cell Reaction by Recombinant Escherichia coli Cells Expressing [FeFe]‐Hydrogenase and Maturases Genes

A photocatalytic H₂ production system using an inorganic–bio hybrid photocatalyst could contribute to the efficient utilization of solar energy, but would require the development of a new approach for preparing a H₂‐forming biocatalyst. In the present study, we constructed a recombinant strain of Escherichia coli expressing the genes encoding the [FeFe]‐hydrogenase and relevant maturases from Clostridium acetobutylicum NBRC 13948 for use as a biocatalyst. We investigated the direct application of a whole‐cell of the recombinant E. coli. The combination of TiO₂, methylviologen, and the recombinant E. coli formed H₂ under light irradiation, demonstrating that whole cells of the recombinant E. coli could be employed for photocatalytic H₂ production without any time‐consuming and costly manipulations (for example, enzyme purification). This is the first report of the direct application of a whole‐cell reaction of recombinant E. coli to photocatalytic H₂ production.     

Synthesis of Certain 3-Aminopyrazolo[5,4-b]pyridine and 3,4-Substituted Pyrido[2′,3′：3,4]pyrazolo[5,1-c][1,2,4]triazine Derivatives

2-Thioxo-1,2-dihydropyridine derivatives 2a, 2b were reacted with methyl iodide to give 2-methylthiopyridines 3a, 3b, which were reacted with hydrazine hydrate to produce 3-aminopyrazolo[5,4-b]pyridines 4a, 4b. Compounds 4a, 4b were diazotized to afford the corresponding diazonium salts 5a, 5b, which were reacted with some active methylene compounds 6a-6h to give the corresponding pyrido[2′,3′ ： 3,4]pyrazole[5,1-c][1,2,4]triazines 7-14.     

Enantioselective Synthesis of 1,12‐Disubstituted [4]Helicenes

A highly enantioselective synthesis of 1,12‐disubstituted [4]carbohelicenes is reported. The key step for the developed synthetic route is a Au‐catalyzed intramolecular alkyne hydroarylation, which is achieved with good to excellent regio‐ and enantioselectivity by employing TADDOL‐derived (TADDOL=α,α,α,α‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol) α‐cationic phosphonites as ancillary ligands. Moreover, an appropriate design of the substrate makes the assembly of [4]helicenes of different substitution patterns possible, thus demonstrating the synthetic utility of the method. The absolute stereochemistry of the newly prepared structures was determined by X‐ray crystallography and characterization of their photophysical properties is also reported.