The Diversity of Electron‐Transport Behaviors of Molecular Junctions: Correlation with the Electron‐Transport Pathway

We report the electron‐transport behaviors of a number of molecular junctions composed of π‐conjugated molecular wires. From calculations performed by using density functional theory (DFT) combined with the non‐equilibrium Green’s function (NEGF) method, we found that the length–conductivity relations are diverse, depending on the particular molecular structures. The results reveal that the conductance–length dependence follows an exponential law for many conjugated molecules with a single channel, such as oligothiophene, oligopyrrole and oligophenylene. Therefore, a quantitative relation between the energy gap (E_g)_∞ of the molecular wire and the attenuation factor β can be defined. However, when the molecular wires have multichannels, the decay of conductance does not follow the exponential relation. For example, the conductance of porphyrin‐based oligomers and fused thiophene decays almost linearly. The diversity of electron‐transport behaviors of molecular junctions is directly dominated by the electron‐transport pathway.     

Layered Thiadiazoloquinoxaline‐Containing Long Pyrene‐Fused N‐Heteroacenes

Three thiadiazoloquinoxaline‐containing long pyrene‐fused N‐heteroacenes with 8, 13, and 18 rings were designed and synthesized. They show high electron affinities (EAs) of approximately 4.1 eV, which were derived from the onset of the reduction peaks in cyclic voltammetry. Crystal structure analysis revealed in‐plane extension through close contacts between thiadiazole units as well as layered packing, enabling in‐plane and interlayer electron transport. Organic field‐effect transistor devices provided electron mobilities, which suggest a potential way to enhance the charge transport in long N‐heteroacenes.     

Multichannel Conductance of Folded Single‐Molecule Wires Aided by Through‐Space Conjugation

Deciphering charge transport through multichannel pathways in single‐molecule junctions is of high importance to construct nanoscale electronic devices and deepen insight into biological redox processes. Herein, we report two tailor‐made folded single‐molecule wires featuring intramolecular π–π stacking interactions. The scanning tunneling microscope (STM) based break‐junction technique and theoretical calculations show that through‐bond and through‐space conjugations are integrated into one single‐molecule wire, allowing for two simultaneous conducting channels in a single‐molecule junction. These folded molecules with stable π–π stacking interaction offer conceptual advances in single‐molecule multichannel conductance, and are perfect models for conductance studies in biological systems, organic thin films, and π‐stacked columnar aggregates.     

Ruthenium Tris‐bipyridine Single‐Molecule Junctions with Multiple Joint Configurations

Single‐molecule junctions are of particular interest in molecular electronics. To realize molecular electronic devices, it is crucial that functional single‐molecule junctions are connected to each other by using joint units on the atomic scale. However, good joint units have not been reported because controlling the charge transport directions through the junctions is not trivial. Here, we report a joint unit that controls and changes the charge transport directions through the junctions, by using a ruthenium–tris‐bipyridine (RuBpy) complex. The RuBpy single‐molecule junction was fabricated with scanning tunnelling microscopy‐based break junction techniques. The RuBpy single‐molecule junction showed two distinct high and low conductance states. The two states were characterized by the conductance measurement, the correlation analysis, and the comparative experiment of bipyridine (Bpy), which is the ligand unit of RuBpy. We demonstrate that the Ru complex has multiple charge transport paths, where the charge is carried vertically and horizontally through the complex depending on the path.     

Length‐Dependent Conductance of Molecular Wires and Contact Resistance in Metal–Molecule–Metal Junctions

Molecular wires are covalently bonded to gold electrodes—to form metal–molecule–metal junctions—by functionalizing each end with a ? SH group. The conductance of a wide variety of molecular junctions is studied theoretically by using first‐principles density functional theory (DFT) combined with the nonequilibrium Green′s function (NEGF) formalism. Based on the chain‐length‐dependent conductance of the series of molecular wires, the attenuation factor β is obtained and compared with the experimental data. The β value is quantitatively correlated to the molecular HOMO–LUMO gap. Coupling between the metallic electrode and the molecular bridge plays an important role in electron transport. A contact resistance of 6.0±2.0 KΩ is obtained by extrapolating the molecular‐bridge length to zero. This value is of the same magnitude as the quantum resistance.     

Charge Transport through Molecular Rods with Reduced π‐Conjugation

A series of oligophenylene rods of increasing lengths is synthesized to investigate the charge‐transport mechanisms. Methyl groups are attached to the phenyl rings to weaken the electronic overlap of the π‐subsystems along the molecular backbones. Out‐of‐plane rotation of the phenyl rings is confirmed in the solid state by means of X‐ray analysis and in solution by using UV/Vis spectroscopy. The influence of the reduced π‐conjugation on the resonant charge transport is studied at the single‐molecule level by using the mechanically controllable break‐junction technique. Experiments are performed under ultra‐high‐vacuum conditions at low temperature (50 K). A linear increase of the conductance gap with increasing number of phenyl rings (from 260 meV for one ring to 580 meV for four rings) is revealed. In addition, the absolute conductance of the first resonant peaks does not depend on the length of the molecular wire. Resonant transport through the first molecular orbital is found to be dominated by charge‐carrier injection into the molecule, rather than by the intrinsic resistance of the molecular wire length.     

Structure‐Independent Conductance of Thiophene‐Based Single‐Stacking Junctions

The experimental investigation of intermolecular charge transport in π‐conjugated materials is challenging. Herein, we describe the investigation of charge transport through intermolecular and intramolecular paths in single‐molecule and single‐stacking thiophene junctions by the mechanically controllable break junction (MCBJ) technique. We found that the ability for intermolecular charge transport through different single‐stacking junctions was approximately independent of the molecular structure, which contrasts with the strong length dependence of conductance in single‐molecule junctions with the same building blocks, and the dominant charge‐transport path of molecules with two anchors transited from an intramolecular to an intermolecular path when the degree of conjugation increased. An increase in conjugation further led to higher binding probability owing to the variation in binding energies, as supported by DFT calculations.     

Carbazole‐Based Tetrapodal Anchor Groups for Gold Surfaces: Synthesis and Conductance Properties

As the field of molecular‐scale electronics matures and the prospect of devices incorporating molecular wires becomes more feasible, it is necessary to progress from the simple anchor groups used in fundamental conductance studies to more elaborate anchors designed with device stability in mind. This study presents a series of oligo(phenylene‐ethynylene) wires with one tetrapodal anchor and a phenyl or pyridyl head group. The new anchors are designed to bind strongly to gold surfaces without disrupting the conductance pathway of the wires. Conductive probe atomic force microscopy (cAFM) was used to determine the conductance of self‐assembled monolayers (SAMs) of the wires in Au–SAM–Pt and Au–SAM–graphene junctions, from which the conductance per molecule was derived. For tolane‐type wires, mean conductances per molecule of up to 10^?4.37 G₀ (Pt) and 10^?3.78 G₀ (graphene) were measured, despite limited electronic coupling to the Au electrode, demonstrating the potential of this approach. Computational studies of the surface binding geometry and transport properties rationalise and support the experimental results.     

Multicenter‐Bond‐Based Quantum Interference in Charge Transport Through Single‐Molecule Carborane Junctions

Molecular components are vital to introduce and manipulate quantum interference (QI) in charge transport through molecular electronic devices. Up to now, the functional molecular units that show QI are mostly found in conventional π‐ and σ‐bond‐based systems; it is thus intriguing to study QI in multicenter bonding systems without both π‐ and σ‐conjugations. Now the presence of QI in multicenter‐bond‐based systems is demonstrated for the first time, through the single‐molecule conductance investigation of carborane junctions. We find that all the three connectivities in carborane frameworks show different levels of destructive QI, which leads to highly suppressed single‐molecule conductance in para‐ and meta‐connected carboranes. The investigation of QI into carboranes provides a promising platform to fabricate molecular electronic devices based on multicenter bonds.     

Layered Electron Acceptors by Dimerization of Acenes End‐ Capped with 1,2,5‐Thiadiazoles

Layered electron acceptors D1 – 4 equipped with terminal 1,2,5‐thiadiazole groups have been constructed using a one‐pot protocol of acene dimerization. Their molecular structures are determined using single‐crystal X‐ray diffraction analysis. Photophysical and electrochemical properties of these molecules present a marked dependence on conjugation length and molecular geometry. An aggregation‐induced emission peak and an intramolecular excimer emission (IEE) band were observed for D2 and D4 , respectively. This work paves the way for the efficient synthesis of layered heteroacenes.     

Three‐State Single‐Molecule Naphthalenediimide Switch: Integration of a Pendant Redox Unit for Conductance Tuning

We studied charge transport through core‐substituted naphthalenediimide (NDI) single‐molecule junctions using the electrochemical STM‐based break‐junction technique in combination with DFT calculations. Conductance switching among three well‐defined states was demonstrated by electrochemically controlling the redox state of the pendent diimide unit of the molecule in an ionic liquid. The electrical conductances of the dianion and neutral states differ by more than one order of magnitude. The potential‐dependence of the charge‐transport characteristics of the NDI molecules was confirmed by DFT calculations, which account for electrochemical double‐layer effects on the conductance of the NDI junctions. This study suggests that integration of a pendant redox unit with strong coupling to a molecular backbone enables the tuning of charge transport through single‐molecule devices by controlling their redox states.     

Energy‐Level Alignment for Single‐Molecule Conductance of Extended Metal‐Atom Chains

The use of single‐molecule junctions for various functions constitutes a central goal of molecular electronics. The functional features and the efficiency of electron transport are dictated by the degree of energy‐level alignment (ELA), that is, the offset potential between the electrode Fermi level and the frontier molecular orbitals. Examples manifesting ELA are rare owing to experimental challenges and the large energy barriers of typical model compounds. In this work, single‐molecule junctions of organometallic compounds with five metal centers joined in a collinear fashion were analyzed. The single‐molecule i–V scans could be conducted in a reliable manner, and the E_FMO levels were electrochemically accessible. When the electrode Fermi level (E_F) is close to the frontier orbitals (E_FMO) of the bridging molecule, larger conductance was observed. The smaller |E_F?E_FMO| gap was also derived quantitatively, unambiguously confirming the ELA. The mechanism is described in terms of a two‐level model involving co‐tunneling and sequential tunneling processes.     

Length‐Independent Charge Transport in Chimeric Molecular Wires

Advanced molecular electronic components remain vital for the next generation of miniaturized integrated circuits. Thus, much research effort has been devoted to the discovery of lossless molecular wires, for which the charge transport rate or conductivity is not attenuated with length in the tunneling regime. Herein, we report the synthesis and electrochemical interrogation of DNA‐like molecular wires. We determine that the rate of electron transfer through these constructs is independent of their length and propose a plausible mechanism to explain our findings. The reported approach holds relevance for the development of high‐performance molecular electronic components and the fundamental study of charge transport phenomena in organic semiconductors.     

Extension of N‐Heteroacenes through a Four‐Membered Ring

The synthesis of novel π‐extended N‐heteroacenes, which have a large tetraazaacene subunit and a quinoxaline subunit connected through a four‐membered ring, is reported. They were studied with experimental and computational methods in comparison to the corresponding tetraazaacenes. As found from the DFT calculation, the four‐membered ring is a better linker than a five‐membered ring or a C?C single bond to extend N‐heteroacenes for a new design of n‐type semiconductors in terms of the spatial delocalization and energy level of LUMO as well as the reorganization energy. In solution‐processed thin film transistors, the π‐extended N‐heteroacenes are found to function as n‐type semiconductors with field effect mobility of up to 0.02 cm² V^?1 s^?1 under ambient conditions.     

Achieving Efficient Multichannel Conductance in Through‐Space Conjugated Single‐Molecule Parallel Circuits

Constructing single‐molecule parallel circuits with multiple conduction channels is an effective strategy to improve the conductance of a single molecular junction, but rarely reported. We present a novel through‐space conjugated single‐molecule parallel circuit (f‐4Ph‐4SMe) comprised of a pair of closely parallelly aligned p‐quaterphenyl chains tethered by a vinyl bridge and end‐capped with four SMe anchoring groups. Scanning‐tunneling‐microscopy‐based break junction (STM‐BJ) and transmission calculations demonstrate that f‐4Ph‐4SMe holds multiple conductance states owing to different contact configurations. When four SMe groups are in contact with two electrodes at the same time, the through‐bond and through‐space conduction channels work synergistically, resulting in a conductance much larger than those of analogous molecules with two SMe groups or the sum of two p‐quaterphenyl chains. The system is an ideal model for understanding electron transport through parallel π‐stacked molecular systems and may serve as a key component for integrated molecular circuits with controllable conductance.     

Controlling Electrical Conductance through a π‐Conjugated Cruciform Molecule by Selective Anchoring to Gold Electrodes

Tuning charge transport at the single‐molecule level plays a crucial role in the construction of molecular electronic devices. Introduced herein is a promising and operationally simple approach to tune two distinct charge‐transport pathways through a cruciform molecule. Upon in situ cleavage of triisopropylsilyl groups, complete conversion from one junction type to another is achieved with a conductance increase by more than one order of magnitude, and it is consistent with predictions from ab initio transport calculations. Although molecules are well known to conduct through different orbitals (either HOMO or LUMO), the present study represents the first experimental realization of switching between HOMO‐ and LUMO‐dominated transport within the same molecule.     

Silver Makes Better Electrical Contacts to Thiol‐Terminated Silanes than Gold

We report that the single‐molecule junction conductance of thiol‐terminated silanes with Ag electrodes are higher than the conductance of those formed with Au electrodes. These results are in contrast to the trends in the metal work function Φ(Ag)<Φ(Au). As such, a better alignment of the Au Fermi level to the molecular orbital of silane that mediates charge transport would be expected. This conductance trend is reversed when we replace the thiols with amines, highlighting the impact of metal–S covalent and metal–NH₂ dative bonds in controlling the molecular conductance. Density functional theory calculations elucidate the crucial role of the chemical linkers in determining the level alignment when molecules are attached to different metal contacts. We also demonstrate that conductance of thiol‐terminated silanes with Pt electrodes is lower than the ones formed with Au and Ag electrodes, again in contrast to the trends in the metal work‐functions.     

The Correlation of Electrochemical Measurements and Molecular Junction Conductance Simulations in β‐Strand Peptides

Understanding the electronic properties of single peptides is not only of fundamental importance, but it is also paramount to the realization of peptide‐based molecular electronic components. Electrochemical and theoretical studies are reported on two β‐strand‐based peptides, one with its backbone constrained with a triazole‐containing tether introduced by Huisgen cycloaddition (peptide 1 ) and the other a direct linear analogue (peptide 2 ). Density functional theory (DFT) and non‐equilibrium Green’s function were used to investigate conductance in molecular junctions containing peptides 3 and 4 (analogues of 1 and 2 ). Although the peptides share a common β‐strand conformation, they display vastly different electronic transport properties due to the presence (or absence) of the side‐bridge constraint and the associated effect on backbone rigidity. These studies reveal that the electron transfer rate constants of 1 and 2 , and the conductance calculated for 3 and 4 , differ by approximately one order of magnitude, thus providing two distinctly different conductance states and what is essentially a molecular switch. A definitive correlation of electrochemical measurements and molecular junction conductance simulations is demonstrated using two different charge transfer techniques. This study furthers our understanding of the electronic properties of peptides at the molecular level, which provides an opportunity to fine‐tune their molecular orbital energies through suitable structural manipulation.     

单分子结的构筑及分子电导性质的测试

分子电子学已成为21世纪研究的热点. 通过将具有特定功能的分子连接在纳米尺度金属电极之间从而构筑包括分子导线、开关、整流器在内的各种分子尺度电子器件, 这引起了科学家们广泛的研究兴趣. 在分子电子学研究中, 构筑金属/分子/金属(MMM)分子结是研究分子器件中电子传输性质的关键. 尽管已经取得了很大的进展, 目前在纳米尺度下构筑稳定可靠的MMM分子结并测试单个分子的电学性质仍然面临很多挑战. 本文着重对单分子电学性质的测试技术和相关理论研究的最新进展以及存在的挑战做了概述.     

二苯乙炔分子导线的电子输运性质

利用第一性原理非平衡态格林函数方法研究了不同构象下二苯乙炔分子导线的电子输运性质. 从分子轨道空间分布和透射谱等方面讨论了外加偏压下分子构象对电子传递特性的影响及内在机理. 结果表明, 随着分子扭转角的增加, 分子的LUMO-HOMO能隙增加, 透射峰显著降低; 外加偏压下, 分子的HOMO分布向低电势端移动, LUMO向高电势端移动. 电流-电压计算表明, 平面构象分子的导电性最好; 随着扭转角的增加, 分子的导电性变差; 垂直构象分子的导电性最差. 最后给出了分子导线电子传递性质与分子构象的定量关系.