Host–Guest Complexation of Perethylated Pillar[5]arene with Alkanes in the Crystal State

Activated perethylated pillar[5]arene crystals show an unexpected alkane‐shape‐ and ‐length‐selective gate‐opening behavior. Activated crystals were obtained upon removing solvents from perethylated pillar[5]arene crystals by heating. The activated crystals could quantitatively take up n‐alkanes with carbon chains containing more than five carbon atoms as a consequence of their gate‐opening pressure. As the chain length of the n‐alkanes increased, the gate pressure decreased. A transformation into a herringbone structure was induced when n‐hexane was used as a guest. By contrast, cyclic and branched alkanes were not taken up and could not induce a crystal transformation because they were too large to fit in the cavities of the pillar[5]arene. Alkane‐shape‐selective molecular recognition of pillar[5]arenes in the solution state was translated into the vapor/crystal state.     

Alkane Shape- and Size-Recognized Selective Vapor Sorption in “Channel-Like” Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C−C and C−H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated “channel-like” crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique “gate-opening” mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.     

Dihalobenzene Shape Sorting by Nonporous Adaptive Crystals of Perbromoethylated Pillararenes

The separation of dihalobenzene isomers, such as dichlorobenzene isomers and difluorobenzene isomers, has a high practical value in both synthetic chemistry and industrial production. Herein we provide a simple to operate and energy‐efficient adsorptive separation method using nonporous adaptive crystals of perbromoethylated pillar[5]arene ( BrP5 ) and pillar[6]arene ( BrP6 ). BrP6 crystals show a preference towards the ortho isomer of dichlorobenzene in isomer mixtures, but cannot discriminate difluorobenzene isomers. Single‐crystal structures reveal that this selectivity is derived from the stability of the new host–guest crystal structure of BrP6 after uptake of the preferred guest and the binding strength of the host–guest interactions. Furthermore, because of the reversible transition between guest‐free and guest‐loaded structures, BrP6 crystals are recyclable.     

Separation of Aromatics/Cyclic Aliphatics by Nonporous Adaptive Pillararene Crystals

The separation of cyclic aliphatics of high purity, which are produced from hydrogenation of the corresponding aromatics, is highly desired in the chemical industry. An energy‐efficient and environmentally friendly adsorptive separation method using nonporous adaptive crystals of perethylated pillar[5]arene (EtP5) and pillar[6]arene (EtP6) is described. Adaptive EtP5 crystals separate toluene from methylcyclohexane with 98.8 % purity, while adaptive EtP6 crystals separate methylcyclohexane from toluene with 99.2 % purity. The selectivities come from the stability of new EtP5 and EtP6 crystal structures upon capture of toluene and methylcyclohexane, respectively. The reversible transformations between nonporous guest‐free EtP5 or EtP6 structures and guest‐loaded structures make them highly recyclable.     

Insights into the Self-Filling Effects of Branched Isopropyl Groups on the Conformational and Supramolecular Properties of Isopropoxyprism[6]arene

In this work, the direct macrocyclization of a prism[6]arene macrocycle bearing branched alkyl chains on the rims is reported. Isopropoxyprism[6]arene adopts in solution and in the solid state a cuboid D₂-conformation in which four isopropyl groups are folded inside the cavity, to give C−H⋅⋅⋅π interactions and filling the internal void. The conformational features of isopropoxyprism[6]arene have been studied by dynamic ¹H NMR experiments. The presence of branched isopropyl chains on the prism[6]arene rims, stabilizes the cuboid D₂-conformation to a greater extent than ethyl or propyl groups in PrS[6]^Et and PrS[6]^nPr. The higher resistance of PrS[6]^iPr to open its cuboid D₂ conformation, with respect to PrS[6]^Et and PrS[6]^nPr, also affected its binding abilities. In fact, alkylammonium-based endo-cavity complexes of PrS[6]^iPr show lower binding constant values than the analogous propoxy/ethoxy-prism[6]arene complexes.     

Host–Guest Complexation Using Pillar[5]arene Crystals: Crystal-Structure Dependent Uptake,Release, and Molecular Dynamics of an Alkane Guest

Host–guest complexation has been mainly investigated in solution, and it is unclear how guest molecules access the assembled structures of host and dynamics of guest molecules in the crystal state. In this study, we studied the uptake, release, and molecular dynamics of n-hexane vapor in the crystal state of pillar[5]arenes bearing different substituents. Pillar[5]arene bearing 10 ethyl groups yielded a crystal structure of herringbone-type 1:1 complexes with n-hexane, whereas pillar[5]arene with 10 allyl groups formed 1:1 complexes featuring a one-dimensional (1D) channel structure. For pillar[5]arene bearing 10 benzyl groups, one molecule of n-hexane was located in the cavity of pillar[5]arene, and another n-hexane molecule was located outside of the cavity between two pillar[5]arenes. The substituent-dependent differences in molecular arrangement influenced the uptake, release, and molecular dynamics of the n-hexane guest. The substituent effects were not observed in host–guest chemistry in solution, and these features are unique for the crystal state host–guest chemistry of pillar[5]arenes.     

Piling Up Pillar[5]arenes To Self‐Assemble Nanotubes

New liquid‐crystalline pillar[5]arene derivatives have been prepared by grafting first‐generation Percec‐type poly(benzylether) dendrons onto the macrocyclic scaffold. The molecules adopt a disc‐shaped structure perfectly suited for self‐organization into a columnar liquid‐crystalline phase. In this way, the pillar[5]arene cores are piled up, thus forming a nanotubular wire encased within a shell of peripheral dendrons. The capability of pillar[5]arenes to form inclusion complexes has been also exploited. Specifically, detailed binding studies have been carried out in solution with 1,6‐dicyanohexane as the guest. Inclusion complexes have also been prepared in the solid state. Supramolecular organization into the Col_h mesophase has been deduced from X‐ray diffraction data and found to be similar to that observed within the crystal lattice of a model inclusion complex prepared from 1,4‐dimethoxypillar[5]arene and 1,6‐dicyanohexane.     

Stereoselective Synthesis of Pillar[4]arene[1]cis‐diepoxy‐p‐dione and X‐Ray Crystal Structure of Host–Guest System

Herein, we successfully develop a novel route to give rise to polarity for the pillararenes by the introduction of oxygenated functionalities into pillar[5]arene to stereoselectively synthesize the pillar[4]arene[1]cis ‐diepoxy‐p ‐dione. Its host–guest properties with different dinitrile molecules were also investigated and characterized by NMR and X‐ray crystallography.     

Separation of Bromoalkanes Isomers by Nonporous Adaptive Crystals of Leaning Pillar[6]arene

Haloalkanes are important chemicals in synthetic chemistry and petrochemical industry, but the separation of their isomers is a big hurdle. Herein, we report a facile energy‐efficient adsorptive separation strategy using a new class of nonporous adaptive crystals based on leaning pillar[6]arene. Desolvated perethylated leaning pillar[6]arene crystals (EtLP6) with interesting nonporous character show a preference for 1‐bromoalkane isomers over 2‐bromoalkane isomers. EtLP6 is capable of separating 1‐bromopropane, 1‐bromobutane, and 1‐bromopentane from the corresponding 1:1 (v/v) mixtures of 1/2‐positional isomers with purities from 89.6 % to 96.3 % in only one adsorption cycle. The selectivity is endowed by the different host–guest binding modes and different stabilities of EtLP6 crystalloids loaded with 1‐ and 2‐positional isomers. Significantly, the guest–adsorbed assemblies are highly stable at room temperature and EtLP6 can be reused many times without any decrease in performance.     

Synthesis of a water-soluble pillar[6]arene dodecaamine and its selective binding of acidic amino acids in water

A water-soluble pillar[6]arene dodecaamine has been synthesized. ¹H NMR and fluorescence studies indicate that pillar[6]arene dodecaamine could selectively and strongly bind acidic amino acids, i.e. glutamic acid and aspartic acid in water. And the complexation behavior of pillar[6]arene dodecaamine towards acidic tripeptide glutathione and short chain length (C₃ to C₈) dicarboxylic acids in water is also investigated.     

Open‐tubular capillary electrochromatography using carboxylatopillar[5]arene as stationary phase

Pillar[n]arenes have achieved much interest in material chemistry and supramolecular chemistry due to unusual pillar shape structure and high selectivity toward guest. However, pillar[n]arenes have not yet been applied in capillary electrochromatography. This work at first time reports that carboxylatopillar[5]arene is used as a stationary phase in open‐tubular capillary electrochromatography. Carboxylatopillar[5]arene not only possess the advantages of pillar[n]arenes but also provide free carboxy groups for immobilizing on the inner wall of capillary column via covalent bonding. The characterization of SEM and FT‐IR indicated that carboxylatopillar[5]arene was successfully grafted on the inner wall of capillary. The baseline separation of model analytes including neutral, basic, and acidic compounds, nonsteroidal anti‐inflammatory drugs and dansyl‐amino acids have been achieved thanks to the electron‐rich cavity of carboxylatopillar[5]arene and hydrophobic interactions between the analytes and stationary phase. The intraday, interday, and column‐to‐column precisions (RSDs) of retention time and peak area for the neutral analytes were all less than 3.34 and 9.65%, respectively. This work indicates that pillar[n]arenes have great potential in capillary electrochromatography as novel stationary phase.     

Construction of π‐Surface‐Metalated Pillar[5]arenes which Bind Anions via Anion–π Interactions

By simple ligand exchange of the cationic transition‐metal complexes [(Cp*)M(acetone)₃](OTf)₂ (Cp*=pentamethylcyclopentadienyl and M=Ir or Rh) with pillar[5]arene, mono‐ and polynuclear pillar[5]arenes, a new class of metalated host molecules, is prepared. Single‐crystal X‐ray analysis shows that the charged transition‐metal cations are directly bound to the outer π‐surface of aromatic rings of pillar[5]arene. One of the triflate anions is deeply embedded within the cavity of the trinuclear pillar[5]arenes, which is different to the host–guest behavior of most pillar[5]arenes. DFT calculation of the electrostatic potential revealed that the metalated pillar[5]arenes featured an electron‐deficient cavity due to the presence of the electron‐withdrawing transition metals, thus allowing encapsulation of electron‐rich guests mainly driven by anion–π interactions.     

Polycationic Pillar[5]arene Derivatives: Interaction with DNA and Biological Applications

Dendritic pillar[5]arene derivatives have been efficiently prepared by grafting dendrons with peripheral Boc‐protected amine subunits onto a preconstructed pillar[5]arene scaffold. Upon cleavage of the Boc‐protected groups, water‐soluble pillar[5]arene derivatives with 20 ( 13 ) and 40 ( 14 ) peripheral ammonium groups have been obtained. The capability of these compounds to form stable nanoparticles with plasmid DNA has been demonstrated by gel electrophoresis, transmission electron microscopy (TEM), and dynamic light scattering (DLS) investigations. Transfection efficiencies of the self‐assembled 13 /pCMV‐Luc and 14 /pCMV‐Luc polyplexes have been evaluated in vitro with HeLa cells. The transfection efficiencies found for both compounds are good, and pillar[5]arenes 13 and 14 show very low toxicity if any.     

Applications of Pillar[n]arene‐Based Supramolecular Assemblies

Macrocycles are an important player in supramolecular chemistry. In 2008, a new class of macrocycles, “pillar[n]arenes”, were first discovered. Research efforts in the area of pillar[n]arenes have elucidated key properties, such as their shape, reaction mechanism, host–guest properties, and their versatile functionality, which has contributed to the development of pillar[n]arene chemistry and their applications to various fields. This Minireview describes how pillar[n]arene‐based supramolecular assemblies can be applied to supramolecular gel formation, reactions, light‐harvesting systems, drug‐delivery systems, biochemical applications, separation and storage materials, and surface chemistry.     

Water-soluble pillar[4]arene[1]quinone: Synthesis,host-guest property and application in the fluorescence turn-on sensing of ethylenediamine in aqueous solution,organic solvent and air

Water-soluble pillar[5]arenes are a class of typical macrocycles and have aroused tremendous attention for its easy to modify, abundant host-guest properties and extensive applications. However, up to now, all the reported water-soluble pillar[5]arenes acted as the host molecules, whereas they failed to be postsynthetically modified, which seriously impeded the development of the pillar[5]arene-based supramolecular chemistry. In this work, a new water-soluble pillar[5]arene, pillar[4]arene[1]quinone, was designed and synthsized with eight quaternary ammonium groups as well as a quinone units. Such a new water-soluble pillar[4]arene[1]quinone was capable of forming 1:1 stable complex with sodium 1-octanesulfonate in aqueous solution. Since the 1,4-quinone unit of WP[4]Q[1] could react with ethylenediamine (EDA) to form a conjugated quinoxaline structure, so pillar[4]arene[1]quinone could apply to the facile fluorescence turn-on sensing of EDA in aqueous solution, organic solvent and air.     

Selective binding of unsaturated aliphatic hydrocarbons by a pillar[5]arene

The complexation behavior of unsaturated fatty hydrocarbons,i.e.,1,7-octadiyne and 1,7-octadiene,by a perethylated pillar[5]arene has been investigated,which was compared with that for saturated n-octane. It was found that the host-guest binding strength increased in accordance with the electron-negativity of the terminal carbon atom on the guests:alkyne>alkene>alkane.     

State- and water repellency-controllable molecular glass of pillar[5]arenes with fluoroalkyl groups by guest vapors

Molecular glasses are low-molecular-weight organic compounds that are stable in the amorphous state at room temperature. Herein, we report a state- and water repellency-controllable molecular glass by n-alkane guest vapors. We observed that a macrocyclic host compound pillar[5]arene with the C₂F₅ fluoroalkyl groups changes from the crystalline to the amorphous state (molecular glass) by heating above its melting point and then cooling to room temperature. The pillar[5]arene molecular glass shows reversible transitions between amorphous and crystalline states by uptake and release of the n-alkane guest vapors, respectively. Furthermore, the n-alkane guest vapor-induced reversible changes in the water contact angle were also observed: water contact angles increased and then reverted back to the original state by the uptake and release of the n-alkane guest vapors, respectively, along with the changes in the chemical structure and roughness on the surface of the molecular glass. The water repellency of the molecular glass could be controlled by tuning the uptake ratio of the n-alkane guest vapor.

Pillar[5]arenes with C₂F₅ substituents showed reversible amorphous–crystal transitions by uptake and release of n-alkane vapors. The amorphous–crystal transitions triggered macroscopic property change such as water repellency.     

Construction of [1]rotaxanes with pillar[5]arene as the wheel and terpyridine as the stopper

The condensation reaction ofω-aminoalkyleneamide-functionalized pillar[5]arenes with 2-(4-([2,2’:6’,2〃-terpyridin]-4’-yl)phenoxy)acetic acid or 4-(4-([2,2’:6’,2"-terpyridin]-4’-yl)phenoxy)butanoic acid in dry chloroform at room temperature under the catalysis of HOBT/EDCl resulted in novel pillar[5]arene diamido-bridged terpyridine derivatives.~1 H NMR and 2 D NOESY spectra clearly indicated that the interesting[1]rotaxanes were formed by longer alkylene such as propylene,butylene and hexylenediamido chains threading into the cavity of the pillar[5]arene and with larger terpyridine acting as the stopper.However,the shorter ethylenediamido chain only exists outer of cavity of pillar[5]arene and the molecule exist on free form.     

per-Hydroxylated pillar[6]arene: synthesis, X-ray crystal structure, and host-guest complexation

A per-hydroxylated pillar[6]arene was prepared. Single-crystal X-ray analysis demonstrated that its molecules are arranged in an up-to-down manner to form infinite channels in the solid state. Its host-guest complexation with a series of bispyridinium salts in solution was further investigated. It was found that the per-hydroxylated pillar[6]arene could form a 1:1 complex with paraquat in acetone with an association constant of 2.2 × 10(2) M(-1). This complex is a [2]pseudorotaxane as shown by its crystal structure, which is the first pillar[6]arene-based host-guest complex crystal structure.     

Monoester Copillar[5]arenes: Synthesis,Unusual Self‐Inclusion Behavior,and Molecular Recognition

The self‐inclusion behavior of monoester copillar[5]arenes depends on the position of the ester group, which causes different guest selectivities. Monoester copillar[5]arenes bearing an acetate chain can form stable self‐inclusion complexes in low‐ and high‐concentration solution and exhibit high guest selectivity. However, a monoester copillar[5]arene bearing a butyrate chain can not form a self‐inclusion complex and exhibits low guest selectivity. Thus, a new class of stable self‐inclusion complexes of copillar[5]arenes was explored to improve the selectivity of molecular recognition.