Structure Switching and Modulation of the Magnetic Properties in Diarylethene‐Bridged Metallosupramolecular Compounds by Controlled Coordination‐Driven Self‐Assembly

We report three self‐assembled iron complexes that comprised an anti‐parallel open form (o‐ L _anti), a parallel open form (o‐ L _syn), and a closed form (c‐ L ) of diarylethene conformers. Under kinetic control, Fe^II₂(o‐ L _anti)₃ was isolated, which exhibited a dinuclear structure with diamagnetic properties. Under light‐irradiation control, Fe^II₂(c‐ L )₃ was prepared and exhibited paramagnetism and spin‐crossover behaviour. Under thermodynamic control and in the presence of indispensable [Fe^III(Tp*)(CN)₃]^?, Fe^II₂(o‐ L _anti)₃ and Fe^II₂(c‐ L )₃ transformed into tetranuclear Fe^III₂Fe^II₂(o‐ L _syn)₂, which exhibited complete spin‐crossover behaviour at T_1/2=353 K.     

catena‐Poly[[diaquadiisothiocyanatoiron(II)]‐μ‐4,4′‐bi‐1,2,4‐triazole]: a one‐dimensional coordination polymer

In the title complex, [Fe(NCS)₂(C₄H₂N₆)₂(H₂O)₂]_n, the Fe^II atom is on an inversion centre and the 4,4′‐bi‐1,2,4‐triazole (btr) group is bisected by a twofold axis through the central N—N bond. The coordination geometry of the Fe^II atom is elongated distorted FeN₄O₂ octahedral, where the cation is coordinated by two N atoms from the triazole rings of two btr groups, two N atoms from NCS⁻ ligands and two water molecules. Btr is a bidentate ligand, coordinating one Fe^II atom through a peripheral N atom of each triazole ring, leading to a one‐dimensional polymeric (chain) structure extending along [101]. The chains are further connected through a network of O—H...N and C—H...S hydrogen bonds.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

The first three‐dimensional FeIII–SrII heterometallic coordination polymer: poly[[diaquatetrakis(μ3‐pyridine‐2,3‐dicarboxylato)diiron(III)strontium(II)] dihydrate]

The title compound, poly[[diaqua‐1κ²O‐tetrakis(μ₃‐pyridine‐2,3‐dicarboxylato)‐2:1:2′κ¹⁰N,O²:O^2′,O³:O^3′;2:1:2′κ⁸O³:O^3′:N,O²‐diiron(III)strontium(II)] dihydrate], {[Fe₂Sr(C₇H₃O₄)₄(H₂O)₂]·2H₂O}_n, which has triclinic (P) symmetry, was prepared by the reaction of pyridine‐2,3‐dicarboxylic acid, SrCl₂·6H₂O and Fe(OAc)₂(OH) (OAc is acetate) in the presence of imidazole in water at 363 K. In the crystal structure, the pyridine‐2,3‐dicarboxylate (pydc²⁻) ligand exhibits μ₃‐η¹,η¹:η¹:η¹ and μ₃‐η¹,η¹:η¹,η¹:η¹ coordination modes, bridging two Fe^III cations and one Sr^II cation. The Sr^II cation, which is located on an inversion centre, is eight‐coordinated by six O atoms of four pydc²⁻ ligands and two water molecules. The coordination geometry of the Sr^II cation can be best described as distorted dodecahedral. The Fe^III cation is six‐coordinated by O and N atoms of four pydc²⁻ ligands in a slightly distorted octahedral geometry. Each Fe^III cation bridges two neighbouring Fe^III cations to form a one‐dimensional [Fe₂(pydc)₄]_n chain. The chains are connected by Sr^II cations to form a three‐dimensional framework. The topology type of this framework is tfj . The structure displays O—H...O and C—H...O hydrogen bonding.     

Fe2O3‐N‐doped Honeycomb‐like Porous Carbon Derived from Nature Silk Sericin as Electrocatalysts for Oxygen Evolution Reaction

A facile method is reported to form a honeycomb‐like porous nanomaterial by intercalation of iron nitrate using nature silk sericin (SS) as nitrogen and carbon source. A series of Fe₂O₃ nanoparticles anchored on Fe₂O₃‐N‐doped graphite carbon electrocatalysts (SS‐Fe) were synthesized, exhibits well‐defined pore structure and excellent oxygen evolution reaction (OER) catalytic activities. Among these materials, SS‐Fe‐0.5 shows the best performance, the overpotential of SS‐Fe‐0.5 at 10 mA · cm^–2 is 440 mV (vs. RHE) and the Tafel slope is only 68 mV · dec^–1. The results indicate that it is promising to the preparation of carbon catalyst materials using natural, renewable and abundant resources for electrocatalysis.     

Mössbauer Spectroscopic Investigation of FeII and FeIII 3,4,5‐Trihydroxybenzoates (Gallates) – Proposed Model Compounds for Iron‐Gall Inks

Iron gallates with iron in the oxidation states Fe²⁺ and Fe³⁺ were prepared and studied by Mössbauer spectroscopy, X‐ray diffraction, and IR spectroscopy. Fe^III 3,4,5‐trihydroxybenzoate (gallate) Fe(C₇O₅H₄) · 2H₂O, whose structure was first determined by Wunderlich, was obtained by the reaction of gallic acid and metallic iron or by oxidation of the Fe^II gallate, which was obtained by the reaction of ferrous sulfate with 3,4,5‐trihydroxybezoic acid (gallic acid) under anoxic conditions. Trials to reproduce the hydrothermal preparation method of Feller and Cheetham show that the result depends crucially on the free gas volume in the reaction vessel. If there is no free volume one obtains the same Fe^III gallate as in the other preparation methods. With a large free volume another compound was found to form whose composition and structure could not be determined. It could be specified only by Mössbauer spectroscopy. Fe^III gallate, the Fe^II gallate, and the new phase show magnetic ordering at liquid helium temperature.     

Enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives by Fe3O4@PS‐arginine as an efficient chiral magnetic nanocatalyst

A novel chiral magnetic nanocatalyst was prepared by the surface modification of Fe₃O₄ magnetic nanoparticles (MNPs) with a chloropropylsilane and further by arginine to form Fe₃O₄@propylsilan‐arginine (Fe₃O₄@PS‐Arg). After the structural confirmation of Fe₃O₄@PS‐Arg synthesized MNPs by Fourier transform‐infrared, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy, vibrating‐sample magnetometry and thermogravimetric analyses, their catalytic activity was evaluated for one‐pot enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives. The results showed that in the presence of 0.07 g Fe₃O₄@PS‐Arg nanocatalyst and ethanol as solvent, the best reaction yield (96%) was obtained in the least time (5 min). Easy operation, reusability and stability, short reaction time, high reaction yields and good enantioselectivity are the major advantages of the newly synthesized nanocatalyst. Also, this study provides a novel strategy for further research and investigation on the synthesis of new reusable enantioselective catalysts and chiral compounds.     

catena‐Poly[[[pentaaquathulium(III)]‐μ‐5‐sulfonatobenzene‐1,3‐dicarboxylato] 4,4′‐bipyridyl 1.5‐solvate hemihydrate]

The crystal structure of the title compound, {[Tm(C₈H₃O₇S)(H₂O)₅]·1.5C₁₀H₈N₂·0.5H₂O}_n, is built up from two [Tm(SIP)(H₂O)₅] molecules (SIP³⁻ is 5‐sulfonatobenzene‐1,3‐dicarboxylate), three 4,4′‐bipyridyl (bpy) molecules and one solvent water molecule. One of the bpy molecules and the solvent water molecule are located on an inversion centre and a twofold rotation axis, respectively. The Tm^III ion coordination is composed of four carboxylate O atoms from two trianionic SIP³⁻ ligands and five coordinated water molecules. The Tm³⁺ ions are linked by the SIP³⁻ ligands to form a one‐dimensional zigzag chain propagating along the c axis. The chains are linked by interchain O—H...O hydrogen bonds to generate a two‐dimensional layered structure. The bpy molecules are not involved in coordination but are linked by O—H...N hydrogen bonds to form two‐dimensional layers. The two‐dimensional layers are further bridged by the bpy molecules as pillars and the solvent water molecules through hydrogen bonds, giving a three‐dimensional supramolecular structure. π–π stacking interactions between the parallel aromatic rings, arranged in an offset fashion with a face‐to‐face distance of 3.566 (1) Å, are observed in the crystal packing.     

α‐Fe2O3 Cubes with High Visible‐Light‐Activated Photoelectrochemical Activity towards Glucose: Hydrothermal Synthesis Assisted by a Hydrophobic Ionic Liquid

A liquid/liquid interfacial reaction system was designed to fabricate α‐Fe₂O₃ cubes. The reaction system uses a hydrophobic ionic liquid containing iron ions ([(C₈H₁₇)₂(CH₃)₂N]FeCl₄) for manufacturing α‐Fe₂O₃ cubes by a novel and environmentally friendly hydrothermal method under low‐temperature conditions (140 °C). The iron‐containing ionic liquid is hydrophobic and can form a liquid/liquid interface with water, which is vital for fabrication of the α‐Fe₂O₃ cubes. Nanomaterials synthesized from hydrophobic iron‐containing ionic liquids show good crystallinity, well‐developed morphology, and uniform size. The effect of different ionic liquids on the morphology of α‐Fe₂O₃ was investigated in detail. [(C₈H₁₇)₂(CH₃)₂N]FeCl₄ is assumed to perform the triple role of forming a liquid/liquid interface with water and acting as reactant and template at the same time. The effect of the reaction temperature on the formation of the α‐Fe₂O₃ cubes was also studied. Temperatures lower or higher than 140 °C are not conducive to formation of the α‐Fe₂O₃ cubes. Their photoelectrochemical properties were tested by means of the transient photocurrent response of electrodes modified with as‐prepared α‐Fe₂O₃ cubes. The photocurrent response of an α‐Fe₂O₃ cubes/indium tin oxide electrode is high and stable, and it shows great promise as a photoelectrochemical glucose sensor with high sensitivity and fast response, which are beneficial to practical applications of nanosensors.     

An oxo‐centred trinuclear FeIII complex: tri­aqua­hexakis(μ2‐betaine‐O:O′)‐μ3‐oxo‐triiron(III) bis­(tetra­chloro­manganate) trichloride ­hexahydrate

The title compound, [Fe₃(C₅H₁₁NO₂)₆O(H₂O)₃](MnCl₄)₂Cl₃·6H₂O, contains a triiron core linked by a μ₃‐bridging oxide ion. Each of the iron(III) ions has a distorted octahedral environment, being coordinated, in addition to the oxide ion, by four neutral betaine mol­ecules and one water mol­ecule. The N‐alkyl­ated α‐amino acid betaine is present in the dipolar zwitterionic form and chelates pairs of Fe atoms at the vertices of the triangular [Fe₃O]⁷⁺ ionic core. The Fe complex has a crystallographically imposed D3 symmetry. The water mol­ecules fully exhaust their potential as hydrogen donors, forming a two‐dimensional hydrogen‐bond network in planes parallel to (001).     

Solvent water tapes in two hydrates of μ‐oxo‐bis­[bis­(2,2′‐bipyridine‐κ2N,N′)(sulfato‐κO)iron(III)]

The title compound, [Fe₂O(SO₄)₂(C₁₀H₈N₂)₄], crystallizes as two different hydrates, viz. 11H₂O, (I), and 15H₂O, (II). The complex is binuclear, in which the two Fe^III atoms are coordinated in an octa­hedral geometry to four N atoms from the two bipyridine ligands, to one O atom from the sulfate ion and to an oxide ion on a twofold axis, which acts as a bridge between the symmetry‐related units. The Fe⋯Fe separation is 3.556 (4) Å and the Fe—O—Fe angle is 161.6 (2)° in (I); the corresponding values are 3.544 (1) Å and 165.8 (2)° in (II). In (II), one of the O atoms of the sulfate ion is disordered over two positions. In both compounds, the solvent water mol­ecules form slightly different one‐dimensional hydrogen‐bonded networks which pass along the c axis of the unit cell. In (I), three solvent water mol­ecules and, in (II), one solvent water mol­ecule, are situated on the twofold axis. In both (I) and (II), the central O atom of the metal complex lies on a twofold axis.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Three‐Dimensional Fe2N@C Microspheres Grown on Reduced Graphite Oxide for Lithium‐Ion Batteries and the Li Storage Mechanism

Nanostructured iron compounds as lithium‐ion‐battery anode material have attracted considerable attention with respect to improved electrochemical energy storage and excellent specific capacity, so lots of iron‐based composites have been developed. Herein, a novel composite composed of three‐dimensional Fe₂N@C microspheres grown on reduced graphite oxide (denoted as Fe₂N@C‐RGO) has been synthesized through a simple and effective technique assisted by a hydrothermal and subsequent heating treatment process. As the anode material for lithium‐ion batteries, the synthetic Fe₂N@C‐RGO displayed excellent Li⁺‐ion storage performance with a considerable initial capacity of 847 mAh g^?1, a superior cycle stability (a specific discharge capacity of 760 mAh g^?1 remained after the 100th cycle), and an improved rate‐capability performance compared with those of the pure Fe₂N and Fe₂N‐RGO nanostructures. The good performance should be attributed to the existence of RGO layers that can facilitate to enhance the conductivity and shorten the lithium‐ion diffusion path; in addition, the carbon layer on the surface of Fe₂N can avert the structure decay caused by the volume change during the lithiation/delithiation process. Moreover, in situ X‐ray absorption fine‐structure analysis demonstrated that the excellent performance can be attributed to the lack of any obvious change in the coordination geometry of Fe₂N@C‐RGO during the charge/discharge processes.     

Surviving High‐Temperature Calcination: ZrO2‐Induced Hematite Nanotubes for Photoelectrochemical Water Oxidation

Nanotubular Fe₂O₃ is a promising photoanode material, and producing morphologies that withstand high‐temperature calcination (HTC) is urgently needed to enhance the photoelectrochemical (PEC) performance. This work describes the design and fabrication of Fe₂O₃ nanotube arrays that survive HTC for the first time. By introducing a ZrO₂ shell on hydrothermal FeOOH nanorods by atomic layer deposition, subsequent high‐temperature solid‐state reaction converts FeOOH‐ZrO₂ nanorods to ZrO₂‐induced Fe₂O₃ nanotubes (Zr‐Fe₂O₃ NTs). The structural evolution of the hematite nanotubes is systematically explored. As a result of the nanostructuring and shortened charge collection distance, the nanotube photoanode shows a greatly improved PEC water oxidation activity, exhibiting a photocurrent density of 1.5 mA cm⁻² at 1.23 V (vs. reversible hydrogen electrode, RHE), which is the highest among hematite nanotube photoanodes without co‐catalysts. Furthermore, a Co‐Pi decorated Zr‐Fe₂O₃ NT photoanode reveals an enhanced onset potential of 0.65 V (vs. RHE) and a photocurrent of 1.87 mA cm⁻² (at 1.23 V vs. RHE).     

Mixed‐chalcogenide double‐butterfly complex [{(CO)6Fe2SSe}2{μ‐­C(H)—C(H)}]

Bubbling acetyl­ene gas slowly through a methanol solution of [(CO)₆Fe₂{μ‐SSe}] containing sodium acetate for 48 h at room temperature yields the double‐butterfly complex μ‐[ethane‐1,1,2,2‐tetra(selenido/sulfido)]bis[hexacarbonyldiiron(Fe—Fe)], [Fe₄(C₂H₂S₂Se₂)(CO)₁₂]. The molecular structure was established by single‐crystal X‐ray diffraction techniques. The structure consists of two Fe₂SSe butterfly units linked to each other through a bridging HC—CH group. The mol­ecule has twofold symmetry and the two Fe atoms have distorted octahedral geometries.     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

Threonine stabilizer‐controlled well‐dispersed small palladium nanoparticles on modified magnetic nanocatalyst for Heck cross‐coupling process in water

We report the synthesis of magnetically separable Fe₃O₄@Silica‐Threonine‐Pd⁰ magnetic nanoparticles with a core–shell structure. After synthesis of Fe₃O₄@Silica, threonine as an efficient stabilizer/ligand was bonded to the surface of Fe₃O₄@Silica. Then, palladium nanoparticles were generated on the threonine‐modified catalyst. The threonine stabilizer helps to generate palladium nanoparticles of small size (less than 4 nm) with high dispersity and uniformity. Magnetically separable Fe₃O₄@Silica‐Threonine‐Pd⁰ nanocatalyst was fully characterized using various techniques. This nanocatalyst efficiently catalysed the Heck cross‐coupling reaction of a variety of substrates in water medium as a green, safe and inexpensive solvent at 80°C. The Fe₃O₄@Silica‐Threonine‐Pd⁰ catalyst was used for at least eight successful consecutive runs with palladium leaching of only 0.05%.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

Synthesis and morphology of Fe3O4/polystyrene/poly(isopropylacrylamide‐co‐methyl acrylate acid) magnetic composite latex – 2,2′‐azobis (2‐methylpropionamidine) dihydrochloride as initiator

In this work, Fe₃O₄/polystyrene/poly(N‐isopropylacryl amide‐co‐methylacrylate acid) (Fe₃O₄/PS/P(NIPAAM‐co‐MAA)) magnetic composite latex was synthesized by the method of two stage emulsion polymerization. In this reaction system, 2,2′‐azobis(2‐methyl propionamidine) dihydrochloride (AIBA) was used as initiator to initiate the first stage reaction and second stage reaction. The Fe₃O₄ particles were prepared by a traditional coprecipitation method. Fe₃O₄ particles were surface treated by either PAA oligomer or lauric acid to form the stable ferrofluid. The first stage for the synthesis of magnetic composite latex was to synthesize PS in the presence of ferrofluid by soapless emulsion polymerization to form the Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out by the method of soapless emulsion polymerization with NIPAAM and MAA as monomers and Fe₃O₄/PS latex as seeds. The magnetic composite particles, Fe₃O₄/PS/P(NIPAAM‐co‐MAA), were thus obtained. The mechanism of the first stage reaction and second stage reaction were investigated. Moreover, the effects of PAA and lauric acid on the reaction kinetics, morphology, and particle size distribution were studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3912–3921, 2007