A π‐stacked and conjugated hybrid based on poly(N‐vinylcarbazole) postfunctionalized with terfluorene for stable deep‐blue hole‐transporting materials

The combination of π‐stacked with π‐conjugated building blocks offers an essential strategy to construct multifunctional organic semiconductors (MOSs) with the unique optoelectrical properties. Covalent hybrids can efficiently avoid the intrinsic phase‐separation defects in corresponding blend system. In this contribution, poly(vinylcarbazole) tethered with terfluorene, PVK‐TF, as a double‐channeled π‐stacked and π‐conjugated hybrid (SCH), has been constructed via Friedal‐Crafts click postmodification (FCCP). The chemical structure and optoelectrical property were determined by GPC, UV–vis, PL, TGA, DSC, and CV. Its PL spectra in the annealing thin film at N₂ atmosphere without low‐energy emission bands centered at the 530 nm indicates that no π‐stacks between carbazole and TF or among TFs dominate the whole condensed phase, which is in agreement with the intrachain T‐shaped π‐pitched motifs in molecular modeling simulation due to steric hindrance effect in complicated diarylfluorenes (CDAFs). A supporting prototype stable deep‐blue PLED was successfully obtained with an Internationale de l'Eclairage (CIE) coordinates of (0.20, 0.10) and a width at half maximum (FWHM) of about 60 nm at high current density of 100 mA/cm² (35 V). Deep‐blue PVK‐TF is a promising MOS for hole‐transporting and host materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5221–5229, 2009     

Palladium‐Catalyzed Construction of Heteroatom‐Containing π‐Conjugated Systems by Intramolecular Oxidative CH/CH Coupling Reaction

Synthesis of heteroatom‐containing ladder‐type π‐conjugated molecules was successfully achieved via a palladium‐catalyzed intramolecular oxidative C?H/C?H cross‐coupling reaction. This reaction provides a variety of π‐conjugated molecules bearing heteroatoms, such as nitrogen, oxygen, phosphorus, and sulfur atoms, and a carbonyl group. The π‐conjugated molecules were synthesized efficiently, even in gram scale, and larger π‐conjugated molecules were also obtained by a double C?H/C?H cross‐coupling reaction and successive oxidative cycloaromatization.     

An X‐shaped π‐conjugated polymer comprising of fluorene units and anthracene units with high efficiency. Synthesis and optical and electrochemical properties

A new X‐shaped π‐conjugated monomer comprising of fluorene units and anthracene units was synthesized, and it was used to fabricate the new X‐shaped π‐conjugated polymers and investigate the properties of the new polymers. Using different molar ratios between such monomer and a fluorene monomer gave three polymers that showed higher absolute PL quantum yields than the linear polyfluorene (PF) in the solid state. After thermal annealing at 200 °C for 4 h, the linear PF showed an additional bathochromic emission at about 550 nm, whereas such red‐shifted emission was fully eliminated for the X‐shaped polymers. The electroluminescent devices based on the X‐shaped polymers with a configuration of ITO/PEDOT:PSS/polymer/LiF/Ca/Al displayed blue emission with low turn‐on voltage and high brightness. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5616–5625, 2008     

Preparation and Acid‐Responsive Photophysical Properties of T‐Shaped π‐Conjugated Molecules Containing a Benzimidazole Junction

T‐shaped π‐conjugated molecules with an N‐methyl‐benzimidazole junction have been synthesized and their acid‐responsive photophysical properties owing to the change in the π‐conjugation system are discussed. T‐shaped π‐conjugated molecules consist of two orthogonal π‐conjugated systems including a phenyl thiophene extended from the 2‐position and alkyl phenylenes connected through various π‐spacers from the 4,7‐positions of the N‐methyl‐benzimidazole junction. The π‐spacers, such as thiophene, ethyne, and ethane, have an effect on the acid response of photophysical properties in terms of changes in conformation, excited‐state energy and charge‐transfer (CT) characteristics. In particular, the π‐conjugated molecule with ethynyl spacers exhibited a marked redshift in the fluorescence spectrum with a large Stokes shift upon the addition of acid, whereas the other molecules showed substantial quenching. The redshift in emission was studied in detail by temperature‐dependent fluorescence measurements, which indicated the transition to a CT state over the finite activation energy at the excited state. The change in the frontier molecular orbitals upon acid addition was further discussed by means of DFT calculations.     

Controlling the Emergence and Shift Direction of Mechanochromic Luminescence Color of a Pyridine‐Terminated Compound

In this study, mechanochromic luminescence was induced in a complex of mechano‐inactive compounds. Dye/acid complexes containing the same π‐conjugated backbones were prepared. While the luminophore showed blue and red shifts in photoluminescence spectra when combined with different acids by grinding, it exhibited slight mechanoresponsiveness itself. Also, compounds with similar molecular backbones to the dye/acid complex were synthesized to clarify the color change mechanism. The compounds showed both blue and red shifts in photoluminescence and diffuse reflectance spectra upon grinding, indicating that mechanochromic luminescence in the hydrogen‐bonded complex is like its monomeric analogue and that aggregation structure plays an important role in mechanoresponsive behavior rather than the π‐conjugated structure. It was shown that a color change can be mechanically induced by imitating the solid‐state aggregation structure of other mechanoresponsive compounds without synthetic modification.     

Tailoring Excited State Properties and Energy Levels Arrangement via Subtle Structural Design on D‐π‐A Materials

The donor‐π‐conjugated‐acceptor (D‐π‐A) structure is an important design for the luminescent materials because of its diversity in the selections of donor, π‐bridge and acceptor groups. Herein, we demonstrate two examples of D‐π‐A structures capable to finely modulate the excited state properties and arrangement of energy levels, TPA‐AN‐BP and CZP‐AN‐BP , which possess the same acceptor and π‐bridge but different donor. The investigation of their photophysical properties and DFT calculation revealed that the D‐π‐A structure with proper donor, π‐bridge and acceptor can result in separation of frontier molecular orbitals on the corresponding donor and acceptor with an obvious overlap on the π‐bridge, resulting in a hybridized local and charge‐transfer (HLCT ) excited state with high photoluminescent (PL ) efficiencies. Meanwhile, their singlet and triplet states are arranged on corresponding moieties with large energy gap between T₂ and T₁ , and a small energy gap between S₁ and T₂ , which favor the reverse intersystem crossing (RISC ) from high‐lying triplet levels to singlet levels. As a result, the sky‐blue emission non‐doped OLED based on the TPA‐AN‐BP reached maximum external quantum efficiency (EQE ) of 4.39% and a high exciton utilization efficiency (EUE ) of 77%. This study demonstrates a new strategy to construct highly efficient OLED materials.     

Non‐Conjugated Polymer Dots with Crosslink‐Enhanced Emission in the Absence of Fluorophore Units

A new type of fluorescent material is presented, which is called non‐conjugated polymer dots (NCPDs). The NCPDs only possess sub‐fluorophores (which are groups such as C?O, C?N, N?O) instead of typical conjugated fluorophore groups, and thus these materials should not have strong photoluminescence (PL) in the usual sense. Nevertheless, the PL of these sub‐fluorophores can be enhanced by chemical crosslinking or physical immobilization of polymer chains, which is named the crosslink‐enhanced emission (CEE) effect. The significant advances achieved by us and other groups on both experimental and theoretical aspects are discussed, and the covalent‐bond CEE, rigidity‐aggregated CEE, or supramolecular CEE in NCPDs is elaborated. Moreover, synthetic strategies, unique optical properties, and the promise of NCPDs in bio‐related fields, such as bioimaging and drug delivery, are systematically discussed.     

Synthesis of π‐Functional Molecules through Oxidation of Aromatic Amines

In this review, we focus on the synthesis of π‐conjugated functional molecules by the oxidation of aromatic amines, which is one of the most effective methods for the construction of C?C, C?N, and N?N bonds between two π‐conjugated molecular units, and consider their characteristics and applications. Polyanilines are the most common products of the oxidation of aromatic amines; however, azobenzenes, phenazines, and 1,1′‐binaphthyl‐2,2′‐diamines may be produced in this manner also, depending on the reaction conditions. Recent advances in the methodology of aniline oxidation have led to the development of high‐regioselectivity industrial‐scale syntheses of optically or electroactive π‐functional dyes containing nitrogen atoms. In particular, the regioselective fusion of π‐extended aromatic amines can be used to prepare distorted π‐conjugated molecules under mild reaction conditions, allowing the construction of unprecedented curved nitrogen‐containing π‐conjugated molecules.     

Revealing Crystallization‐Induced Blue‐Shift Emission of a Di‐Boron Complex by Enhanced Photoluminescence and Electrochemiluminescence

Elucidating the effects of crystallization‐induced blue‐shift emission of a newly synthesized di‐boron complex (DBC) by enhanced photoluminescence (PL) and electrochemiluminescence (ECL) in the annihilation pathway was realized for the first time. The 57 nm blue‐shift and great enhancement in the crystalline lattice relative to the DBC solution were attributed to the restriction of intramolecular rotation (RIR) and confirmed by PL imaging, X‐ray diffraction, as well as DFT calculations. It was discovered that ECL at crystalline film/solution interfaces can be further enhanced by means of both co‐reactant route and RIR. The RIR contributions with co‐reactant increased ECL up to 5 times more. Very interestingly, the co‐reactant system was found to give off a red‐shifted light emission. Mechanistic studies reveal that a difference between location of the ECL in the co‐reactant route and that in the annihilation pathway leads to an alternative emission wavelength.     

Self‐assembly of π‐conjugated bis(terpyridine) ligands with zinc(II) ions: New metallosupramolecular materials for optoelectronic applications

A series of main‐chain metallopolymers ( P1–P10 ) was prepared by the self‐assembly of rigid‐linear π‐conjugated bis(terpyridine) monomers ( 1–10 ) with Zn^II ions and was fully characterized. The polymerization was additionally confirmed by UV/vis titration experiments. A strong increase in viscosities (around 1.6 times) relative to those of the monomer solutions was found. The thermal stability of P1–P10 compared with that of 1–10 was enhanced as a result of the metallopolymerization. The electro‐optical properties of the materials were investigated in detail. Tuning of the electrochemical and photophysical properties was enabled; thus, bright purple to green photoluminescent (PL) emission (PL quantum yields of 0.12–0.81) for P1–P10 was observed in solution with the emission color strongly depending on the nature of the π‐conjugated bis(terpyridine) system. Thin homogeneous films of P6 were prepared by solution processing, that is, spin‐coating and inkjet‐printing, and exhibited intense yellow PL emission in the solid state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4083–4098, 2009     

Photoactivated Fluorescence Enhancement in F,N‐Doped Carbon Dots with Piezochromic Behavior

Photoactivation in CdSe/ZnS quantum dots (QDs) on UV/Vis light exposure improves photoluminescence (PL) and photostability. However, it was not observed in fluorescent carbon quantum dots (CDs). Now, photoactivated fluorescence enhancement in fluorine and nitrogen co‐doped carbon dots (F,N‐doped CDs) is presented. At 1.0 atm, the fluorescence intensity of F,N‐doped CDs increases with UV light irradiation (5 s–30 min), accompanied with a blue‐shift of the fluorescence emission from 586 nm to 550 nm. F,N‐doped CDs exhibit photoactivated fluorescence enhancement when exposed to UV under high pressure (0.1 GPa). F,N‐doped CDs show reversible piezochromic behavior while applying increasing pressure (1.0 atm to 9.98 GPa), showing a pressure‐triggered aggregation‐induced emission in the range 1.0 atm–0.65 GPa. The photoactivated CDs with piezochromic fluorescence enhancement broadens the versatility of CDs from ambient to high‐pressure conditions and enhances their anti‐photobleaching.     

Thiophene‐Based,Radial π‐Conjugation: Synthesis,Structure, and Photophysical Properties of Cyclo‐1,4‐phenylene‐2′,5′‐thienylenes

The synthesis of cyclo‐1,4‐phenylene‐2′,5′‐thienylenes (CPTs) as the first example of a thiophene‐based, radially π‐conjugated system is described. X‐ray crystal structures, UV‐vis absorption and emission spectra, and theoretical studies revealed the unique structural and photophysical properties of CPTs. With all of these unique structural and photophysical properties, the radially π‐conjugated CPTs are expected to open a door for the discovery and development of new functional organic materials.     

Thiophene‐Based,Radial π‐Conjugation: Synthesis,Structure, and Photophysical Properties of Cyclo‐1,4‐phenylene‐2′,5′‐thienylenes

The synthesis of cyclo‐1,4‐phenylene‐2′,5′‐thienylenes (CPTs) as the first example of a thiophene‐based, radially π‐conjugated system is described. X‐ray crystal structures, UV‐vis absorption and emission spectra, and theoretical studies revealed the unique structural and photophysical properties of CPTs. With all of these unique structural and photophysical properties, the radially π‐conjugated CPTs are expected to open a door for the discovery and development of new functional organic materials.     

Fluorene‐Based π‐Conjugated Oligomers for Efficient Three‐Photon Excited Photoluminescence and Lasing

A novel series of diphenylamino‐ and 1,2,4‐triazole‐end‐capped, fluorene‐based, π‐conjugated oligomers that includes extended oligofluorenes and oligothienylfluorenes has been synthesized by means of the palladium‐catalyzed Suzuki cross‐coupling of 9,9‐dibutyl‐7‐(diphenylamino)‐2‐fluorenylboronic acid and the corresponding 1,2,4,‐triazole‐based aryl halide as a key step. It was demonstrated that efficient two‐ and three‐photon excited photoluminescence and lasing in the blue region are obtained by pumping near‐infrared femtosecond lasers on these materials. Although the absorption and emission maxima of the highly fluorescent and extended oligofluorenes reach a saturation limit, there exists an effective conjugation length for an optimum three‐photon absorption cross section in the homologous oligofluorene series. On the other hand, the multiphoton excited emission spectrum and lasing wavelength can easily be modified or tuned by an incorporation of thienyl unit(s) into the fluorene‐based π‐conjugated core with which exceptionally large three‐photon absorption cross sections up to 3.59×10^?77 cm⁶ s² in the femtosecond regime have been obtained, thereby highlighting the potential of this series of photonic materials. The optimized full width at half‐maximum of the cavityless three‐photon upconverted blue lasing spectra are sharply narrowed to approximately 6 nm with an efficiency of up to 0.013 %.     

Near‐Infrared‐Emitting Nitrogen‐Doped Nanographenes

The quantum‐size effect, which enables nanographenes to emit photoluminescence (PL) in the UV to visible region, has inspired intense research. However, the control of the PL properties of nanographenes through manipulation of their π‐system by post‐modifications is not well developed. By utilizing a ring‐closure reaction between an aromatic 1,2‐dicarboxylic acid and a 1,8‐naphthalenediamine derivative, which produces a perimidine framework, nitrogen‐doped nanographenes were realized. Two nanographenes produced by a one‐pot reaction of edge‐oxidized nanographene (GQD‐ 2 ) with 1,8‐naphthalenediamine derivatives (GQD‐ 1 a and GQD‐ 1 b ) displayed an absorption band extending to >1000 nm; furthermore, the PL wavelength of GQD‐ 1 a was significantly red‐shifted into the near‐infrared (NIR) region in which it can be used for bioimaging. Time‐dependent DFT calculations of model nanographenes showed that the functional groups narrow the HOMO–LUMO gap, realizing the NIR‐emitting nanographenes.     

Corannulene‐Fused Anion‐Responsive π‐Conjugated Molecules that Form Self‐Assemblies with Unique Electronic Properties

The fusion of bowl‐shaped π‐conjugated corannulene units to anion‐responsive π‐conjugated dipyrrolyldiketone‐boron complexes resulted in new molecular materials with a unique self‐assembly capability. The bowl‐fused receptor with aliphatic tails could form both supramolecular gels and mesophases through π‐stacking interactions and also exhibited anion‐responsive characteristics. The presence of the π‐bowl unit not only afforded enhanced self‐assembly capability both in solution and in the mesophases, as evidenced by gelation experiments and phase‐transition profiles, but also enhanced intrinsic charge‐carrier mobility.     

Multicolored‐Fluorescence Switching of ICT‐Type Organic Solids with Clear Color Difference: Mechanically Controlled Excited State

A donor–acceptor‐type fluorophore containing a twisted diphenylacrylonitrile and triphenylamine has been developed by using the Suzuki reaction. The system indicates typical intramolecular charge‐transfer properties. Upon mechanical grinding or hydrostatic pressure, the fluorophore reveals a multicolored fluorescence switching. Interestingly, a fluorescence color transition from green to red was clearly observed, and the change of photoluminescent (PL) wavelength gets close to 111 nm. The mechanisms of high‐contrast mechanochromic behavior are fully investigated by techniques including powder XRD, PL lifetime, high‐pressure PL lifetime, and Raman spectra analysis. The tremendous PL wavelength shift is attributed to gradual transition of excited states from the local excited state to the charge‐transfer state.     

ortho‐Phenylene‐Bridged Cyclic Oligopyrroles: Conformational Flexibilities and Optical Properties

ortho‐Phenylene‐bridged cyclic trimeric oligopyrrole C3 and hexameric oligopyrrole C6 were synthesized by Suzuki–Miyaura coupling reactions. The twisted structures of C3 and C6 were unambiguously revealed by X‐ray diffraction analysis. The optical properties of these cyclic oligopyrroles were compared with linear oligopyrrole L3 and cyclic tetramer C4 . The cyclic oligopyrroles exhibited large Stokes shifts and blue fluorescence with high quantum yields in solution and in the solid state. In addition, selective N‐methylation and N‐tolylation of C3 were used to tune the optical and electrochemical properties by changing the molecular twists and conformational flexibilities. Throughout these studies, the structure–property relationship of these cyclic strained oligopyrroles has been illustrated as an interesting molecular motif for novel cyclic π‐conjugated systems.     

Synthesis of Di‐ and Trixanthones that Display High Stability and a Visual Fluorescence Response to Strong Acid

Three dixanthones ( 1 – 3 ) and an unprecedented C_3h‐symmetric trixanthone ( 4 ) were synthesized through a three‐step approach in overall yields above 63 %. These compounds possessed a planar π‐conjugated system and formed tight face‐to‐face columnar stacks, as confirmed by single‐crystal structural analysis. In comparison with xanthone, the fluorescence emissions of compounds 1 – 4 showed significant red‐shifts, with improved quantum yields. Moreover, the fluorescence emissions of compounds 1 – 4 could be modulated in a strongly acidic environment without decomposition, which led to a further red‐shift of the emissions, as well as enhancement of the emission intensities. These compounds have potential applications as optoelectronic materials and/or chemosensors.     

Reversible Luminescent Switching in an Organic Cocrystal: Multi‐Stimuli‐Induced Crystal‐to‐Crystal Phase Transformation

A luminescent cocrystal system is reported to undergo crystal‐to‐crystal phase transformation from yellow‐emitting polymorph I to green‐emitting polymorph II, triggered by THF fuming or heating, and the green emission can recover to the initial yellow emission by grinding. The established spectroscopic and crystallographic analyses demonstrate that the phase transition occurred and benefits from the combined effect of similar molecular arrange sequence and unique alteration of intermolecular interactions from halogen/hydrogen bonds in I to π–π stacking in II. Furthermore, I and II exhibit red‐shift emission under hydrostatic pressure. The emission of I and II shows a red‐shift and recovers towards the initial emission upon acid–base fuming. This is a rare example of reversible luminescent switching of cocrystal based upon crystal‐to‐crystal phase transition, and provides an alternative strategy to develop multi‐stimuli responsive materials.