Triplet Acceptors with a D‐A Structure and Twisted Conformation for Efficient Organic Solar Cells

Triplet acceptors have been developed to construct high‐performance organic solar cells (OSCs) as the long lifetime and diffusion range of triplet excitons may dissociate into free charges instead of net recombination when the energy levels of the lowest triplet state (T₁) are close to those of charge‐transfer states (³CT). The current triplet acceptors were designed by introducing heavy atoms to enhance the intersystem crossing, limiting their applications. Herein, two twisted acceptors without heavy atoms, analogues of Y6, constructed with large π‐conjugated core and D‐A structure, were confirmed to be triplet materials, leading to high‐performance OSCs. The mechanism of triplet excitons were investigated to show that the twisted and D‐A structures result in large spin–orbit coupling (SOC) and small energy gap between the singlet and triplet states, and thus efficient intersystem crossing. Moreover, the energy level of T₁ is close to ³CT, facilitating the split of triplet exciton to free charges.     

Triplet Acceptors with a D-A Structure and Twisted Conformation for Efficient Organic Solar Cells

Triplet acceptors have been developed to construct high-performance organic solar cells (OSCs) as the long lifetime and diffusion range of triplet excitons may dissociate into free charges instead of net recombination when the energy levels of the lowest triplet state (T₁) are close to those of charge-transfer states (³CT). The current triplet acceptors were designed by introducing heavy atoms to enhance the intersystem crossing, limiting their applications. Herein, two twisted acceptors without heavy atoms, analogues of Y6, constructed with large π-conjugated core and D-A structure, were confirmed to be triplet materials, leading to high-performance OSCs. The mechanism of triplet excitons were investigated to show that the twisted and D-A structures result in large spin–orbit coupling (SOC) and small energy gap between the singlet and triplet states, and thus efficient intersystem crossing. Moreover, the energy level of T₁ is close to ³CT, facilitating the split of triplet exciton to free charges.     

Singlet relaxation dynamics and long triplet lifetimes of thiophene-coupled perylene diimides dyads: New insights for high efficiency organic solar cells

In the active layer of organic solar cells (OSCs), the lifetime of triplet excitons is one of the decisive factors in the diffusion length and therefore has important impact on the power conversion efficiency of the devices. Herein, we have investigated singlet excited state relaxation dynamics and their triplet exciton lifetimes of two thiophene-coupled perylene diimides (PDI) dyads (2PDI-Th and fused-2PDI-Th), in order to provide a unique explanation in depth on their different performances in OSC devices. From the transient absorption (TA) spectra, the singlet excitons of 2PDI-Th form excimers in the time scale of 1.5 ps. Then the excimers go into the triplet state via intersystem crossing (ISC). In fused-2PDI-Th, triplet excitons are generated directly from the singlet excited excitons via the efficient ISC. Density functional theory (DFT) calculations further support the formation of excimers. DFT results indicate that 2PDI-Th exhibits an H-typed molecular configuration which is beneficial to form the excimers, while fused-2PDI-Th gives a twisted X-shaped configuration in the optimized ground and excited state. In steady-state emission spectra, 2PDI-Th shows abroad and featureless spectral characteristics of the excimers with a decay time of 840 ps, which is much shorter than those of PDI (5.5 ns) and fused-2PDI-Th (3.3 ns). The triplet lifetime (67 μs) of fused-2PDI-Th is factor of 3 longer than that of 2PDI-Th (22 μs). These results demonstrate that ring-fused structure is an efficient strategy to eliminate excimer formation and prolong the lifetime of triplet excitons, which provides a new insight for design of optoelectronic molecules for high efficiency organic solar cells.     

Singlet relaxation dynamics and long triplet lifetimes of thiophene-coupled perylene diimides dyads: New insights for high efficiency organic solar cells

In the active layer of organic solar cells (OSCs), the lifetime of triplet excitons is one of the decisive factors in the diffusion length and therefore has important impact on the power conversion efficiency of the devices. Herein, we have investigated singlet excited state relaxation dynamics and their triplet exciton lifetimes of two thiophene-coupled perylene diimides (PDI) dyads (2PDI-Th and fused-2PDI-Th), in order to provide a unique explanation in depth on their different performances in OSC devices. From the transient absorption (TA) spectra, the singlet excitons of 2PDI-Th form excimers in the time scale of 1.5 ps. Then the excimers go into the triplet state via intersystem crossing (ISC). In fused-2PDI-Th, triplet excitons are generated directly from the singlet excited excitons via the efficient ISC. Density functional theory (DFT) calculations further support the formation of excimers. DFT results indicate that 2PDI-Th exhibits an H-typed molecular configuration which is beneficial to form the excimers, while fused-2PDI-Th gives a twisted X-shaped configuration in the optimized ground and excited state. In steady-state emission spectra, 2PDI-Th shows abroad and featureless spectral characteristics of the excimers with a decay time of 840 ps, which is much shorter than those of PDI (5.5 ns) and fused-2PDI-Th (3.3 ns). The triplet lifetime (67 μs) of fused-2PDI-Th is factor of 3 longer than that of 2PDI-Th (22 μs). These results demonstrate that ring-fused structure is an efficient strategy to eliminate excimer formation and prolong the lifetime of triplet excitons, which provides a new insight for design of optoelectronic molecules for high efficiency organic solar cells.     

High-Pressure Fabrication of Binary Organic Solar Cells with High Molecular Weight D18 Yields Record 19.65 % Efficiency

In this work, inspired by the principles of a pressure cooker, we utilized a high-pressure method to address the processing challenges associated with high molecular weight polymers. Through this approach, we successfully dissolved high molecular weight D18 in chloroform at 100 °C within a pressure-tight vial. The increased steam pressure raised the boiling point and dissolving capacity of chloroform, enabling the creation of a hybrid film with superior properties, including more ordered molecular arrangement, increased crystallinity, extended exciton diffusion length, and improved phase morphology. Organic solar cells (OSCs) based on D18 : L8-BO prepared using this high-pressure method achieved an outstanding power conversion efficiency of 19.65 %, setting a new record for binary devices to date. Furthermore, this high-pressure method was successfully applied to fabricate OSCs based on other common systems, leading to significant enhancements in device performance. In summary, this research introduces a universal method for processing high molecular weight D18 materials, ultimately resulting in the highest performance reported for binary organic solar cells.     

Influence of donor:acceptor ratio on charge transfer dynamics in non-fullerene organic bulk heterojunctions

The donor:acceptor(D:A) blend ratio plays a very important role in affecting the progress of charge transfer and energy transfer in bulk heterojunction(BHJ) orga nic solar cells(OSCs).The proper D:A blend ratio can provide maximized D/A interfacial area for exciton dissociation and appro p riate domain size of the exciton diffusion length,which is beneficial to obtain high-performance OSCs.Here,we comprehensively investigated the relationship between various D:A blend ratios and the charge transfer and energy transfer mechanisms in OSCs based on PBDB-T and non-fullerene acceptor IT-M.Based on various D:A blend ratios,it was found that the ratio of components is a key factor to suppress the formation of triplet states and recombination energy losses.Rational D:A blend ratios can provide appropriate donor/accepter surface for charge transfer which has been powerfully verified by various detailed experimental results from the time-resolved fluorescence measurement and transient absorption(TA) spectroscopy.Optimized coherence length and crystallinity are verified by grazing incident wide-angle X-ray scattering(GIWAXS) measurements.The results are bene ficial to comprehend the effects of various D:A blend ratios on charge transfer and energy transfer dynamics and provides constructive suggestions for rationally designing new materials and feedback for photovoltaic performance optimization in non-fullerene OSCs.     

The improved efficiency of low molecular weight organic solar cells doped with a Cu(I) triplet material

We developed a method to improve the performance of the copper phthalocyanine (CuPc)/fullerene (C₆₀) organic solar cells (OSCs) by doping CuPc with a long triplet lifetime material. By doping [Cu(bis[2-(diphenylphosphino)phenyl]ether)(benzo[i]dipyrido[3,2-a:2′,3′-c]phenazine)]BF₄ (CuDB) into CuPc, the enhanced short-circuit current density (J_SC) of 6.213 mA/cm², open-circuit voltage (V_OC) of 0.39 V and a peak power conversion efficiency (PCE) of 0.92% compared to 0.79% of the standard CuPc/C₆₀ OSCs are achieved under 1 sun AM 1.5 G illumination at an intensity of 100 mW/cm². The performance improvement is mainly attributed to the long triplet lifetime of CuDB (τ = 70.05 μs) which leads to more effective exciton dissociation.     

Fluorinated Photovoltaic Materials for High‐Performance Organic Solar Cells

Over the past decade, organic solar cells (OSCs) have achieved a dramatic boost in their power conversion efficiencies from about 6 % to over 16 %. In addition to developments in device engineering, innovative photovoltaic materials, especially fluorinated donors and acceptors, have become the dominant factor for improved device performance. This minireview highlights fluorinated photovoltaic materials that enable efficient OSCs. Impressive OSCs have been obtained by developing some important molds of fluorinated donor and acceptor systems. The molecular design strategy and the matching principle of fluorinated donors and acceptors in OSCs are discussed. Finally, a concise summary and outlook are presented for advances in fluorinated materials to realize the practical application of OSCs.     

有机太阳能电池中基于苝二酰亚胺结构小分子受体进展

最近几年,有机太阳能电池中的非富勒烯小分子受体研究引起了人们的兴趣。其中,苝二酰亚胺(PDI)类分子因具有良好的电子传输能力,较强的电子亲和力,稳定的光、热、化学性能以及化学结构的可设计性带来的性能可调控性而得到广泛的关注。本文总结了近三年来在体异质结有机太阳能电池应用方面PDI小分子受体的研究进展,重点关注了PDI分子结构对其性能的影响,希望为以后PDI类受体分子的设计思路起到一定的启发作用。     

Stable Radical TEMPO Terminated Perylene Bisimide(PBI) Based Small Molecule as Cathode Interlayer for Efficient Organic Solar Cells

By combining stable radical tetramethylpiperidine nitrogen oxide(TEMPO) as end groups and perylene bisimide(PBI) as the core, a small molecular cathode interlayer(CIL) (PBI-TEMPO) was synthesized. Detailed physical-chemical characterizations indicate that PBI-TEMPO can form smooth film, owns low unoccupied molecular orbital(LUMO) level of –3.67 eV and can reduce the work function of silver electrode. When using PBI-TEMPO as CIL in non-fullerene organic solar cells(OSCs), the PM6:BTP-4Cl based OSCs delivered high power conversion efficiencies(PCEs) up to 17.37%, higher than those using commercial PDINO CIL with PCEs of 16.95%. Further device characterizations indicate that PBI-TEMPO can facilitate more efficient exciton dissociation and reduce charge recombination, resulting in enhanced current density and fill factor. Moreover, PBI-TEMPO displays higher thermal stability than PDINO in solution. When PBI-TEMPO and PDINO solution were heated at 150 ℃ for 2 h and then were used as CIL in solar cells, PBI-TEMPO-based OSCs provided a PCE of 15%, while PDINO-based OSCs only showed a PCE of 10%. These results demonstrate that incorporating TEMPO into conjugated materials is a useful strategy to create new organic semiconductors for application in OSCs.     

Potential of Nonfullerene Small Molecules with High Photovoltaic Performance

Over the past decades, fullerene derivatives have become the most successful electron acceptors in organic solar cells (OSCs) and have achieved great progress, with power conversion efficiencies (PCEs) of over 11 %. However, fullerenes have some drawbacks, such as weak absorption, limited energy‐level tunability, and morphological instability. In addition, fullerene‐based OSCs usually suffer from large energy losses of over 0.7 eV, which limits further improvements in the PCE. Recently, nonfullerene small molecules have emerged as promising electron acceptors in OSCs. Their highly tunable absorption spectra and molecular energy levels have enabled fine optimization of the resulting devices, and the highest PCE has surpassed 12 %. Furthermore, several studies have shown that OSCs based on small‐molecule acceptors (SMA) have very efficient charge generation and transport efficiency at relatively low energy losses of below 0.6 eV, which suggests great potential for the further improvement of OSCs. In this focus review, we analyze the challenges and potential of SMA‐based OSCs and discuss molecular design strategies for highly efficient SMAs.     

Recent Progress in Organic Solar Cells: A Review on Materials from Acceptor to Donor

In the last few decades, organic solar cells (OSCs) have drawn broad interest owing to their advantages such as being low cost, flexible, semitransparent, non-toxic, and ideal for roll-to-roll large-scale processing. Significant advances have been made in the field of OSCs containing high-performance active layer materials, electrodes, and interlayers, as well as novel device structures. Particularly, the innovation of active layer materials, including novel acceptors and donors, has contributed significantly to the power conversion efficiency (PCE) improvement in OSCs. In this review, high-performance acceptors, containing fullerene derivatives, small molecular, and polymeric non-fullerene acceptors (NFAs), are discussed in detail. Meanwhile, highly efficient donor materials designed for fullerene- and NFA-based OSCs are also presented. Additionally, motivated by the incessant developments of donor and acceptor materials, recent advances in the field of ternary and tandem OSCs are reviewed as well.     

Self‐Assembled Helical Arrays for the Stabilization of the Triplet State

Room‐temperature phosphorescence of metal and heavy atom‐free organic molecules has emerged as an area of great potential in recent years. A rational design played a critical role in controlling the molecular ordering to impart efficient intersystem crossing and stabilize the triplet state to achieve room‐temperature ultralong phosphorescence. However, in most cases, the strategies to strengthen phosphorescence efficiency have resulted in a reduced lifetime, and the available nearly degenerate singlet‐triplet energy levels impart a natural competition between delayed fluorescence and phosphorescence, with the former one having the advantage. Herein, an organic helical assembly supports the exhibition of an ultralong phosphorescence lifetime. In contrary to other molecules, 3,6‐phenylmethanone functionalized 9‐hexylcarbazole exhibits a remarkable improvement in phosphorescence lifetime (>4.1 s) and quantum yield (11 %) owing to an efficient molecular packing in the crystal state. A right‐handed helical molecular array act as a trap and exhibits triplet exciton migration to support the exceptionally longer phosphorescence lifetime.     

Facile,Quick, and Gram‐Scale Synthesis of Ultralong‐Lifetime Room‐Temperature‐Phosphorescent Carbon Dots by Microwave Irradiation

Long‐lifetime room‐temperature phosphorescence (RTP) materials are important for many applications, but they are highly challenging materials owing to the spin‐forbidden nature of triplet exciton transitions. Herein, a facile, quick and gram‐scale method for the preparation of ultralong RTP (URTP) carbon dots (CDs) was developed via microwave‐assisted heating of ethanolamine and phosphoric acid aqueous solution. The CDs exhibit the longest RTP lifetime, 1.46 s (more than 10 s to naked eye) for CDs‐based materials to date. The doping of N and P elements is critical for the URTP which is considered to be favored by a n→π* transition facilitating intersystem crossing (ISC) for effectively populating triplet excitons. In addition, possibilities of formation of hydrogen bonds in the interior of the CDs may also play a significant role in producing RTP. Potential applications of the URTP CDs in the fields of anti‐counterfeiting and information protection are proposed and demonstrated.     

Facile,Quick, and Gram‐Scale Synthesis of Ultralong‐Lifetime Room‐Temperature‐Phosphorescent Carbon Dots by Microwave Irradiation

Long‐lifetime room‐temperature phosphorescence (RTP) materials are important for many applications, but they are highly challenging materials owing to the spin‐forbidden nature of triplet exciton transitions. Herein, a facile, quick and gram‐scale method for the preparation of ultralong RTP (URTP) carbon dots (CDs) was developed via microwave‐assisted heating of ethanolamine and phosphoric acid aqueous solution. The CDs exhibit the longest RTP lifetime, 1.46 s (more than 10 s to naked eye) for CDs‐based materials to date. The doping of N and P elements is critical for the URTP which is considered to be favored by a n→π* transition facilitating intersystem crossing (ISC) for effectively populating triplet excitons. In addition, possibilities of formation of hydrogen bonds in the interior of the CDs may also play a significant role in producing RTP. Potential applications of the URTP CDs in the fields of anti‐counterfeiting and information protection are proposed and demonstrated.     

A computational investigation on singlet and triplet exciton couplings in acene molecular crystals

Quantum chemical calculations (DFT, TDDFT and ZINDO/S) of singlet and triplet exciton couplings are presented and discussed for some acene derivatives (such as anthracene, tetracene, 9,10-di(phenyl)anthracene and 9,10-bis(phenylethynyl)anthracene). An accurate excited state single molecule characterization has been carried out followed by an analysis of the inter-molecular excitonic interactions, taking place in the crystalline phase. These have been correlated to exciton coupling terms obtaining guidelines for the choice of molecular materials with large exciton couplings. Such organic systems are likely to show multiexciton processes such as singlet fission (SF) and triplet-triplet annihilation (TTA) which are useful in energy conversion phenomena to be exploited in photonic and optoelectronic devices.     

Molecular and Device Design Strategies for Ideal Performance White Organic Light‐Emitting Diodes

The progress of white organic light‐emitting diodes (WOLEDs) via adopting fluorescent and phosphorescent organic materials have attracted commercial interest for their broad range of visible spectrum and potential of 100 % internal quantum efficiency. In this account, smart molecular designs for developing efficient phosphorescent host and good color purity blue fluorescent emitters are prepared to be discussed, especially donor‐acceptor modification to regulate their triplet states and bipolar transport properties. Rational device configuration design strategies were also introduced by cooperating with efficient conventional fluorescent and thermally activated delayed fluorescent emitting molecules to achieve full exciton utilization and simplified device structures, further suggesting perspectives of potentially low‐cost, ideal performance and promoted operational lifetime in WOLED devices.     

High-efficiency organic solar cells with low voltage-loss of 0.46 V

The recent evolution of active components yielded brilliant progresses for organic solar cells (OSCs), yet the mechanism is needed to be clearly understood. In this work, two electron acceptors, a linear SN6-2Br and a V-shaped BTP-2Br, are developed with nitrogen atoms introduced to replace the traditional sp³-hybridized carbon in the fused ring. BTP-2Br possesses an electron-deficient central core, which exhibits slightly blue-shifted absorption as well as deepened HOMO-level compared with SN6-2Br. The corresponding photovoltaic performance from V-shaped BTP-2Br based devices exhibit superior performance especially in short-circuit current (J_sc), despite an enhanced absorption and charge carrier mobilities for SN6-2Br. The primary reason for the higher J_sc from BTP-2Br is faster exciton diffusion and dissociation in blends, than those of SN6-2Br. As a result, PBDB-TF:BTP-2Br based devices achieve a power conversion efficiency (PCE) of 13.84% with an voltage-loss of only 0.46 V, which is one of the lowest values ever reported. Moreover, we fabricated semitransparent OSCs that exhibit an excellent PCE of 9.62% with average visible transparency of 20.1%.     

Complete Peripheral Fluorination of the Small-Molecule Acceptor in Organic Solar Cells Yields Efficiency over 19 %

Due to the intrinsically flexible molecular skeletons and loose aggregations, organic semiconductors, like small molecular acceptors (SMAs) in organic solar cells (OSCs), greatly suffer from larger structural/packing disorders and weaker intermolecular interactions comparing to their inorganic counterparts, further leading to hindered exciton diffusion/dissociation and charge carrier migration in resulting OSCs. To overcome this challenge, complete peripheral fluorination was performed on basis of a two-dimensional (2D) conjugation extended molecular platform of CH-series SMAs, rendering an acceptor of CH8F with eight fluorine atoms surrounding the molecular backbone. Benefitting from the broad 2D backbone, more importantly, strengthened fluorine-induced secondary interactions, CH8F and its D18 blends afford much enhanced and more ordered molecular packings accompanying with enlarged dielectric constants, reduced exciton binding energies and more obvious fibrillary networks comparing to CH6F controls. Consequently, D18:CH8F-based OSCs reached an excellent efficiency of 18.80 %, much better than that of 17.91 % for CH6F-based ones. More excitingly, by employing D18-Cl that possesses a highly similar structure to D18 as a third component, the highest efficiency of 19.28 % for CH-series SMAs-based OSCs has been achieved so far. Our work demonstrates the dramatical structural multiformity of CH-series SMAs, meanwhile, their high potential for constructing record-breaking OSCs through peripheral fine-tuning.     

Harnessing the Structure-Performance Relationships in Designing Non-Fused Ring Acceptors for Organic Solar Cells

The prerequisite for commercially viable organic solar cells (OSC) is to reduce the efficiency-stability-cost gap. Therefore, the cost of organic materials should be reduced by minimizing the synthetic steps, yet maintaining the molecular planarity and efficiencies achieved by the fused ring acceptors (FRA). In this respect, developing non-fused ring acceptors (NFRA) with suitable functionalization to favor conformational planarity and effective molecular packing is beneficial and cost-effective. Presently, the power conversion efficiency (PCE) for NFRAs is around 16 %, yet lower than the 19 % achieved for FRAs. Despite their potential, a thorough understanding of the effective structural design of NFRAs is necessary for developing efficient OSCs. This article pays special attention to the molecular design concept for NFRAs developed in the last years and analyzed the approach toward materials design and efficiency improvement, an important step toward technological application.