Carbon and Carbon Hybrid Materials as Anodes for Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) have attracted much attention for application in large‐scale grid energy storage owing to the abundance and low cost of sodium sources. However, low energy density and poor cycling life hinder practical application of SIBs. Recently, substantial efforts have been made to develop electrode materials to push forward large‐scale practical applications. Carbon materials can be directly used as anode materials, and they show excellent sodium storage performance. Additionally, designing and constructing carbon hybrid materials is an effective strategy to obtain high‐performance anodes for SIBs. In this review, we summarize recent research progress on carbon and carbon hybrid materials as anodes for SIBs. Nanostructural design to enhance the sodium storage performance of anode materials is discussed, and we offer some insight into the potential directions of and future high‐performance anode materials for SIBs.     

From Lithium‐Ion to Sodium‐Ion Batteries: Advantages,Challenges, and Surprises

Mobile and stationary energy storage by rechargeable batteries is a topic of broad societal and economical relevance. Lithium‐ion battery (LIB) technology is at the forefront of the development, but a massively growing market will likely put severe pressure on resources and supply chains. Recently, sodium‐ion batteries (SIBs) have been reconsidered with the aim of providing a lower‐cost alternative that is less susceptible to resource and supply risks. On paper, the replacement of lithium by sodium in a battery seems straightforward at first, but unpredictable surprises are often found in practice. What happens when replacing lithium by sodium in electrode reactions? This review provides a state‐of‐the art overview on the redox behavior of materials when used as electrodes in lithium‐ion and sodium‐ion batteries, respectively. Advantages and challenges related to the use of sodium instead of lithium are discussed.     

Alkali‐Metal‐Ion‐Functionalized Graphene Oxide as a Superior Anode Material for Sodium‐Ion Batteries

Although graphene oxide (GO) has large interlayer spacing, it is still inappropriate to use it as an anode for sodium‐ion batteries (SIBs) because of the existence of H‐bonding between the layers and ultralow electrical conductivity which impedes the Na⁺ and e^? transformation. To solve these issues, chemical, thermal, and electrochemical procedures are traditionally employed to reduce GO nanosheets. However, these strategies are still unscalable, consume high amounts of energy, and are expensive for practical application. Here, for the first time, we describe the superior Na storage of unreduced GO by a simple and scalable alkali‐metal‐ion (Li⁺, Na⁺, K⁺)‐functionalized process. The various alkali metals ions, connecting with the oxygen on GO, have played different effects on morphology, porosity, degree of disorder, and electrical conductivity, which are crucial for Na‐storage capabilities. Electrochemical tests demonstrated that sodium‐ion‐functionalized GO (GNa) has shown outstanding Na‐storage performance in terms of excellent rate capability and long‐term cycle life (110 mAh g^?1 after 600 cycles at 1 A g^?1) owing to its high BET area, appropriate mesopore, high degree of disorder, and improved electrical conductivity. Theoretical calculations were performed using the generalized gradient approximation (GGA) to further study the Na‐storage capabilities of functionalized GO. These calculations have indicated that the Na?O bond has the lowest binding energy, which is beneficial to insertion/extraction of the sodium ion, hence the GNa has shown the best Na‐storage properties among all comparatives functionalized by other alkali metal ions.     

A Biodegradable Polydopamine‐Derived Electrode Material for High‐Capacity and Long‐Life Lithium‐Ion and Sodium‐Ion Batteries

Polydopamine (PDA), which is biodegradable and is derived from naturally occurring products, can be employed as an electrode material, wherein controllable partial oxidization plays a key role in balancing the proportion of redox‐active carbonyl groups and the structural stability and conductivity. Unexpectedly, the optimized PDA derivative endows lithium‐ion batteries (LIBs) or sodium‐ion batteries (SIBs) with superior electrochemical performances, including high capacities (1818 mAh g^?1 for LIBs and 500 mAh g^?1 for SIBs) and good stable cyclabilities (93 % capacity retention after 580 cycles for LIBs; 100 % capacity retention after 1024 cycles for SIBs), which are much better than those of their counterparts with conventional binders.     

High‐Entropy Layered Oxide Cathodes for Sodium‐Ion Batteries

Material innovation on high‐performance Na‐ion cathodes and the corresponding understanding of structural chemistry still remain a challenge. Herein, we report a new concept of high‐entropy strategy to design layered oxide cathodes for Na‐ion batteries. An example of layered O3‐type NaNi_0.12Cu_0.12Mg_0.12Fe_0.15Co_0.15Mn_0.1Ti_0.1Sn_0.1Sb_0.04O₂ has been demonstrated, which exhibits the longer cycling stability (ca. 83 % of capacity retention after 500 cycles) and the outstanding rate capability (ca. 80 % of capacity retention at the rate of 5.0 C). A highly reversible phase‐transition behavior between O3 and P3 structures occurs during the charge‐discharge process, and importantly, this behavior is delayed with more than 60 % of the total capacity being stored in O3‐type region. Possible mechanism can be attributed to the multiple transition‐metal components in this high‐entropy material which can accommodate the changes of local interactions during Na⁺ (de)intercalation. This strategy opens new insights into the development of advanced cathode materials.     

Development and Investigation of a NASICON‐Type High‐Voltage Cathode Material for High‐Power Sodium‐Ion Batteries

Herein, we introduce a 4.0 V class high‐voltage cathode material with a newly recognized sodium superionic conductor (NASICON)‐type structure with cubic symmetry (space group P2₁3), Na₃V(PO₃)₃N. We synthesize an N‐doped graphene oxide‐wrapped Na₃V(PO₃)₃N composite with a uniform carbon coating layer, which shows excellent rate performance and outstanding cycling stability. Its air/water stability and all‐climate performance were carefully investigated. A near‐zero volume change (ca. 0.40 %) was observed for the first time based on in situ synchrotron X‐ray diffraction, and the in situ X‐ray absorption spectra revealed the V^3.2+/V^4.2+ redox reaction with high reversibility. Its 3D sodium diffusion pathways were demonstrated with distinctive low energy barriers. Our results indicate that this high‐voltage NASICON‐type Na₃V(PO₃)₃N composite is a competitive cathode material for sodium‐ion batteries and will receive more attention and studies in the future.     

An O3‐type Oxide with Low Sodium Content as the Phase‐Transition‐Free Anode for Sodium‐Ion Batteries

Layered transition metal oxides Na_xMO₂ (M=transition metal) with P2 or O3 structure have attracted attention in sodium‐ion batteries (NIBs). A universal law is found to distinguish structural competition between P2 and O3 types based on the ratio of interlayer distances of the alkali metal layer d_(O‐Na‐O) and transition‐metal layer d_(O‐M‐O). The ratio of about 1.62 can be used as an indicator. O3‐type Na_0.66Mg_0.34Ti_0.66O₂ oxide is prepared as a stable anode for NIBs, in which the low Na‐content (ca. 0.66) usually undergoes a P2‐type structure with respect to Na_xMO₂. This material delivers an available capacity of about 98 mAh g^?1 within a voltage range of 0.4–2.0 V and exhibits a better cycling stability (ca. 94.2 % of capacity retention after 128 cycles). In situ X‐ray diffraction reveals a single‐phase reaction in the discharge–charge process, which is different from the common phase transitions reported in O3‐type electrodes, ensuring long‐term cycling stability.     

High‐Capacity Anode Materials for Sodium‐Ion Batteries

Na‐ion batteries are an attractive alternative to Li‐ion batteries for large‐scale energy storage systems because of their low cost and the abundant Na resources. This Review provides a comprehensive overview of selected anode materials with high reversible capacities that can increase the energy density of Na‐ion batteries. Moreover, we discuss the reaction and failure mechanisms of those anode materials with a view to suggesting promising strategies for improving their electrochemical performance.     

Cobalt‐Doped FeS2 Nanospheres with Complete Solid Solubility as a High‐Performance Anode Material for Sodium‐Ion Batteries

Considering that the high capacity, long‐term cycle life, and high‐rate capability of anode materials for sodium‐ion batteries (SIBs) is a bottleneck currently, a series of Co‐doped FeS₂ solid solutions with different Co contents were prepared by a facile solvothermal method, and for the first time their Na‐storage properties were investigated. The optimized Co_0.5Fe_0.5S₂ (Fe0.5) has discharge capacities of 0.220 Ah g^?1 after 5000 cycles at 2 A g^?1 and 0.172 Ah g^?1 even at 20 A g^?1 with compatible ether‐based electrolyte in a voltage window of 0.8–2.9 V. The Fe0.5 sample transforms to layered Na_xCo_0.5Fe_0.5S₂ by initial activation, and the layered structure is maintained during following cycles. The redox reactions of Na_xCo_0.5Fe_0.5S₂ are dominated by pseudocapacitive behavior, leading to fast Na⁺ insertion/extraction and durable cycle life. A Na₃V₂(PO₄)₃/Fe0.5 full cell was assembled, delivering an initial capacity of 0.340 Ah g^?1.     

Bio‐Inspired Isoalloxazine Redox Moieties for Rechargeable Aqueous Zinc‐Ion Batteries

Organic electrode materials hold great potential for fabricating sustainable energy storage systems, however, the development of organic redox‐active moieties for rechargeable aqueous zinc‐ion batteries is still at an early stage. Here, we report a bio‐inspired riboflavin‐based aqueous zinc‐ion battery utilizing an isoalloxazine ring as the redox center for the first time. This battery exhibits a high capacity of 145.5 mAh g^?1 at 0.01 A g^?1 and a long‐life stability of 3000 cycles at 5 A g^?1. We demonstrate that isoalloxazine moieties are active centers for reversible zinc‐ion storage by using optical and photoelectron spectroscopies as well as theoretical calculations. Through molecule‐structure tailoring of riboflavin, the obtained alloxazine and lumazine molecules exhibit much higher theoretical capacities of 250.3 and 326.6 mAh g^?1, respectively. Our work offers an effective redox‐active moiety for aqueous zinc batteries and will enrich the valuable material pool for electrode design.     

A Cation and Anion Dual Doping Strategy for the Elevation of Titanium Redox Potential for High‐Power Sodium‐Ion Batteries

Titanium‐based polyanions have been intensively investigated for sodium‐ion batteries owing to their superior structural stability and thermal safety. However, their low working potential hindered further applications. Now, a cation and anion dual doping strategy is used to boost the redox potential of Ti‐based cathodes of Na₃Ti_0.5V_0.5(PO₃)₃N as a new cathode material for sodium ion batteries. Both the Ti³⁺/Ti⁴⁺ and V³⁺/V⁴⁺ redox couples are reversibly accessed, leading to two distinctive voltage platforms at ca. 3.3 V and ca. 3.8 V, respectively. The remarkably improved cycling stability (86.3 %, 3000 cycles) can be ascribed to the near‐zero volume strain in this unusual cubic symmetry, which has been demonstrated by in situ synchrotron‐based X‐ray diffraction. First‐principles calculations reveal its well‐interconnected 3D Na diffusion pathways with low energy barriers, and the two‐sodium‐extracted intermediate NaTi_0.5V_0.5(PO₃)₃N is also a stable phase according to formation energy calculations.     

Highly Porous NiCoSe4 Microspheres as High‐Performance Anode Materials for Sodium‐Ion Batteries

Binary transition metal selenides have been more promising than single transition metal selenides as anode materials for sodium‐ion batteries (SIBs). However, the controlled synthesis of transition metal selenides, especially those derived from metal‐organic‐frameworks with well‐controlled structure and morphology is still challenging. In this paper, highly porous NiCoSe₄@NC composite microspheres were synthesized by simultaneous carbonization and selenization of a Ni?Co‐based metal‐organic framework (NiCo‐MOF) and characterized by scanning electron microscopy, transition electron microscopy, X‐Ray diffraction, X‐Ray photoelectron spectroscopy and electrochemical techniques. The rationally engineered NiCoSe₄@NC composite exhibits a capacity of 325 mAh g^?1 at a current density of 1 A g^?1, and 277.8 mAh g^?1 at 10 A g^?1. Most importantly, the NiCoSe₄@NC retains a capacity of 293 mAh g^?1 at 1 A g^?1 after 1500 cycles, with a capacity decay rate of 0.025 % per cycle.     

Electrochemical Properties and Sodium‐Storage Mechanism of Ag2Mo2O7 as the Anode Material for Sodium‐Ion Batteries

Silver molybdate, Ag₂Mo₂O₇, has been prepared by a conventional solid‐state reaction. Its electrochemical properties as an anode material for sodium‐ion batteries (SIBs) have been comprehensively examined by means of galvanostatic charge–discharge cycling, cyclic voltammetry, and rate performance measurements. At operating voltages between 3.0 and 0.01 V, the electrode delivered a reversible capacity of nearly 190 mA h g^?1 at a current density of 20 mA g^?1 after 70 cycles. Ag₂Mo₂O₇ also demonstrated a good rate capability and long‐term cycle stability, the capacity reaching almost 100 mA h g^?1 at a current density of 500 mA g^?1, with a capacity retention of 55 % over 1000 cycles. Moreover, the sodium storage process of Ag₂Mo₂O₇ has been investigated by means of ex situ XRD, Raman spectroscopy, and HRTEM. Interestingly, the anode decomposes into Ag metal and Na₂MoO₄ during the initial discharge process, and then Na⁺ ions are considered to be inserted into/extracted from the Na₂MoO₄ lattice in the subsequent cycles governed by an intercalation/deintercalation mechanism. Ex situ HRTEM images revealed that Ag metal not only remains unchanged during the sodiation/desodiation processes, but is well dispersed throughout the amorphous matrix, thereby greatly improving the electronic conductivity of the working electrode. The “in situ” decomposition behavior of Ag₂Mo₂O₇ is distinct from that of chemically synthesized, metal‐nanoparticle‐coated electrode materials, and provides strong supplementary insight into the mechanism of such new anode materials for SIBs and may set a precedent for the design of further materials.     

Covalent Assembly of MoS2 Nanosheets with SnS Nanodots as Linkages for Lithium/Sodium‐Ion Batteries

Weak van der Waals interactions between interlayers of two‐dimensional layered materials result in disabled across‐interlayer electron transfer and poor layered structural stability, seriously deteriorating their performance in energy applications. Herein, we propose a novel covalent assembly strategy for MoS₂ nanosheets to realize unique MoS₂/SnS hollow superassemblies (HSs) by using SnS nanodots as covalent linkages. The covalent assembly based on all‐inorganic and carbon‐free concept enables effective across‐interlayer electron transfer, facilitated ion diffusion kinetics, and outstanding mechanical stability, which are evidenced by experimental characterization, DFT calculations, and mechanical simulations. Consequently, the MoS₂/SnS HSs exhibit superb rate performance and long cycling stability in lithium‐ion batteries, representing the best comprehensive performance in carbon‐free MoS₂‐based anodes to date. Moreover, the MoS₂/SnS HSs also show excellent sodium storage performance in sodium‐ion batteries.     

High Crystalline Prussian White Nanocubes as a Promising Cathode for Sodium‐ion Batteries

Prussian blue and its analogues (PBAs) have been recognized as one of the most promising cathode materials for room‐temperature sodium‐ion batteries (SIBs). Herein, we report high crystalline and Na‐rich Prussian white Na₂CoFe(CN)₆ nanocubes synthesized by an optimized and facile co‐precipitation method. The influence of crystallinity and sodium content on the electrochemical properties was systematically investigated. The optimized Na₂CoFe(CN)₆ nanocubes exhibited an initial capacity of 151 mA h g^?1, which is close to its theoretical capacity (170 mA h g^?1). Meanwhile, the Na₂CoFe(CN)₆ cathode demonstrated an outstanding long‐term cycle performance, retaining 78 % of its initial capacity after 500 cycles. Furthermore, the Na₂CoFe(CN)₆ Prussian white nanocubes also achieved a superior rate capability (115 mA h g^?1 at 400 mA g^?1, 92 mA h g^?1 at 800 mA g^?1). The enhanced performances could be attributed to the robust crystal structure and rapid transport of Na ions through large channels in the open‐framework. Most noteworthy, the as‐prepared Na₂CoFe(CN)₆ nanocubes are not only low‐cost in raw materials but also contain a rich sodium content (1.87 Na ions per lattice unit cell), which will be favorable for full cell fabrication and large‐scale electric storage applications.     

All Organic Sodium‐Ion Batteries with Na4C8H2O6

Developing organic compounds with multifunctional groups to be used as electrode materials for rechargeable sodium‐ion batteries is very important. The organic tetrasodium salt of 2,5‐dihydroxyterephthalic acid (Na₄DHTPA; Na₄C₈H₂O₆), which was prepared through a green one‐pot method, was investigated at potential windows of 1.6–2.8 V as the positive electrode or 0.1–1.8 V as the negative electrode (vs. Na⁺/Na), each delivering compatible and stable capacities of ca. 180 mAh g^?1 with excellent cycling. A combination of electrochemical, spectroscopic and computational studies revealed that reversible uptake/removal of two Na⁺ ions is associated with the enolate groups at 1.6–2.8 V (Na₂C₈H₂O₆/Na₄C₈H₂O₆) and the carboxylate groups at 0.1–1.8 V (Na₄C₈H₂O₆/Na₆C₈H₂O₆). The use of Na₄C₈H₂O₆ as the initial active materials for both electrodes provided the first example of all‐organic rocking‐chair SIBs with an average operation voltage of 1.8 V and a practical energy density of about 65 Wh kg^?1.     

Reversible Oxygen Redox Chemistry in Aqueous Zinc‐Ion Batteries

Rechargeable aqueous zinc‐ion batteries (ZIBs) are promising energy‐storage devices owing to their low cost and high safety. However, their energy‐storage mechanisms are complex and not well established. Recent energy‐storage mechanisms of ZIBs usually depend on cationic redox processes. Anionic redox processes have not been observed owing to the limitations of cathodes and electrolytes. Herein, we describe highly reversible aqueous ZIBs based on layered VOPO₄ cathodes and a water‐in‐salt electrolyte. Such batteries display reversible oxygen redox chemistry in a high‐voltage region. The oxygen redox process not only provides about 27 % additional capacity, but also increases the average operating voltage to around 1.56 V, thus increasing the energy density by approximately 36 %. Furthermore, the oxygen redox process promotes the reversible crystal‐structure evolution of VOPO₄ during charge/discharge processes, thus resulting in enhanced rate capability and cycling performance.     

Manipulating Layered P2@P3 Integrated Spinel Structure Evolution for High‐Performance Sodium‐Ion Batteries

Structural evolution of the cathode during cycling plays a vital role in the electrochemical performance of sodium‐ion batteries. A strategy based on engineering the crystal structure coupled with chemical substitution led to the design of the layered P2@P3 integrated spinel oxide cathode Na_0.5Ni_0.1Co_0.15Mn_0.65Mg_0.1O₂, which shows excellent sodium‐ion half/full battery performance. Combined analyses involving scanning transmission electron microscopy with atomic resolution as well as in situ synchrotron‐based X‐ray absorption spectra and in situ synchrotron‐based X‐ray diffraction patterns led to visualization of the inherent layered P2@P3 integrated spinel structure, charge compensation mechanism, structural evolution, and phase transition. This study provides an in‐depth understanding of the structure‐performance relationship in this structure and opens up a novel field based on manipulating structural evolution for the design of high‐performance battery cathodes.     

Solid‐State Electrolyte Anchored with a Carboxylated Azo Compound for All‐Solid‐State Lithium Batteries

Organic electrode materials are promising for green and sustainable lithium‐ion batteries. However, the high solubility of organic materials in the liquid electrolyte results in the shuttle reaction and fast capacity decay. Herein, azo compounds are firstly applied in all‐solid‐state lithium batteries (ASSLB) to suppress the dissolution challenge. Due to the high compatibility of azobenzene (AB) based compounds to Li₃PS₄ (LPS) solid electrolyte, the LPS solid electrolyte is used to prevent the dissolution and shuttle reaction of AB. To maintain the low interface resistance during the large volume change upon cycling, a carboxylate group is added into AB to provide 4‐(phenylazo) benzoic acid lithium salt (PBALS), which could bond with LPS solid electrolyte via the ionic bonding between oxygen in PBALS and lithium ion in LPS. The ionic bonding between the active material and solid electrolyte stabilizes the contact interface and enables the stable cycle life of PBALS in ASSLB.     

An Ultrastable Anode for Long‐Life Room‐Temperature Sodium‐Ion Batteries

Sodium‐ion batteries are important alternative energy storage devices that have recently come again into focus for the development of large‐scale energy storage devices because sodium is an abundant and low‐cost material. However, the development of electrode materials with long‐term stability has remained a great challenge. A novel negative‐electrode material, a P2‐type layered oxide with the chemical composition Na_2/3Co_1/3Ti_2/3O₂, exhibits outstanding cycle stability (ca. 84.84 % capacity retention for 3000 cycles, very small decrease in the volume (0.046 %) after 500 cycles), good rate capability (ca. 41 % capacity retention at a discharge/charge rate of 10 C), and a usable reversible capacity of about 90 mAh g^?1 with a safe average storage voltage of approximately 0.7 V in the sodium half‐cell. This P2‐type layered oxide is a promising anode material for sodium‐ion batteries with a long cycle life and should greatly promote the development of room‐temperature sodium‐ion batteries.