Operando XAFS on Hydrated Calcium Vanadium Bronze Cathode for Aqueous Zn-ion Storage

Multivalent ion storage and aqueous electrochemical systems continue to build interest for energy application. The Zn-ion system with 2 electron transfer and an ideal metal anode is a strong candidate but is still at the early stage of development. Using both in situ near-edge (XANES) and X-ray absorption fine structure spectroscopy, EXAFS, a nanostructured cathode material, Ca_xV₂O₅-H₂O (CVO), was probed at the V-K absorption edge. This operando study reveals the local electronic and geometric structure changes for CVO during galvanostatic cycling as the active material in an aqueous Zn-ion cell. The XANES data provides a fine resolution to track the evolution of the vanadium oxidative state and near-neighbor coordination sphere showing subtle shifts and delocalized charge. The Zn-ion influence on the V-K absorption edge is visualized using a difference technique called Δμ. Coupled with theoretical calculations and modelling, the extended region extracted local bonding information further confirms excellent electronic and structural reversibility of this vanadium oxide bronze in an aqueous Zn-ion electrochemical cell.     

A Deep‐Cycle Aqueous Zinc‐Ion Battery Containing an Oxygen‐Deficient Vanadium Oxide Cathode

Rechargeable aqueous zinc‐ion batteries are attractive because of their inherent safety, low cost, and high energy density. However, viable cathode materials (such as vanadium oxides) suffer from strong Coulombic ion–lattice interactions with divalent Zn²⁺, thereby limiting stability when cycled at a high charge/discharge depth with high capacity. A synthetic strategy is reported for an oxygen‐deficient vanadium oxide cathode in which facilitated Zn²⁺ reaction kinetic enhance capacity and Zn²⁺ pathways for high reversibility. The benefits for the robust cathode are evident in its performance metrics; the aqueous Zn battery shows an unprecedented stability over 200 cycles with a high specific capacity of approximately 400 mAh g^?1, achieving 95 % utilization of its theoretical capacity, and a long cycle life up to 2 000 cycles at a high cathode utilization efficiency of 67 %. This work opens up a new avenue for synthesis of novel cathode materials with an oxygen‐deficient structure for use in advanced batteries.     

Bio‐Inspired Isoalloxazine Redox Moieties for Rechargeable Aqueous Zinc‐Ion Batteries

Organic electrode materials hold great potential for fabricating sustainable energy storage systems, however, the development of organic redox‐active moieties for rechargeable aqueous zinc‐ion batteries is still at an early stage. Here, we report a bio‐inspired riboflavin‐based aqueous zinc‐ion battery utilizing an isoalloxazine ring as the redox center for the first time. This battery exhibits a high capacity of 145.5 mAh g^?1 at 0.01 A g^?1 and a long‐life stability of 3000 cycles at 5 A g^?1. We demonstrate that isoalloxazine moieties are active centers for reversible zinc‐ion storage by using optical and photoelectron spectroscopies as well as theoretical calculations. Through molecule‐structure tailoring of riboflavin, the obtained alloxazine and lumazine molecules exhibit much higher theoretical capacities of 250.3 and 326.6 mAh g^?1, respectively. Our work offers an effective redox‐active moiety for aqueous zinc batteries and will enrich the valuable material pool for electrode design.     

Ruthenium‐Oxide‐Coated Sodium Vanadium Fluorophosphate Nanowires as High‐Power Cathode Materials for Sodium‐Ion Batteries

Sodium‐ion batteries are a very promising alternative to lithium‐ion batteries because of their reliance on an abundant supply of sodium salts, environmental benignity, and low cost. However, the low rate capability and poor long‐term stability still hinder their practical application. A cathode material, formed of RuO₂‐coated Na₃V₂O₂(PO₄)₂F nanowires, has a 50 nm diameter with the space group of I4/mmm. When used as a cathode material for Na‐ion batteries, a reversible capacity of 120 mAh g^?1 at 1 C and 95 mAh g^?1 at 20 C can be achieved after 1000 charge–discharge cycles. The ultrahigh rate capability and enhanced cycling stability are comparable with high performance lithium cathodes. Combining first principles computational investigation with experimental observations, the excellent performance can be attributed to the uniform and highly conductive RuO₂ coating and the preferred growth of the (002) plane in the Na₃V₂O₂(PO₄)₂F nanowires.     

Interfacial Design of Dendrite‐Free Zinc Anodes for Aqueous Zinc‐Ion Batteries

Aqueous zinc‐ion batteries have rapidly developed recently as promising energy storage devices in large‐scale energy storage systems owing to their low cost and high safety. Research on suppressing zinc dendrite growth has meanwhile attracted widespread attention to improve the lifespan and reversibility of batteries. Herein, design methods for dendrite‐free zinc anodes and their internal mechanisms are reviewed from the perspective of optimizing the host–zinc interface and the zinc–electrolyte interface. Furthermore, a design strategy is proposed to homogenize zinc deposition by regulating the interfacial electric field and ion distribution during zinc nucleation and growth. This Minireview can offer potential directions for the rational design of dendrite‐free zinc anodes employed in aqueous zinc‐ion batteries.     

Uniform Decoration of Vanadium Oxide Nanocrystals on Reduced Graphene‐Oxide Balls by an Aerosol Process for Lithium‐Ion Battery Cathode Material

VO₂‐decorated reduced graphene balls were prepared by a one‐pot spray‐pyrolysis process from a colloidal spray solution of well‐dispersed graphene oxide and ammonium vanadate. The graphene–VO₂ composite powders prepared directly by spray pyrolysis had poor electrochemical properties. Therefore, the graphene–VO₂ composite powders were transformed into a reduced graphene ball (RGB)–V₂O₅ (RGB) composite by post‐treatment at 300 °C in an air atmosphere. The TEM and dot‐mapping images showed a uniform distribution of V and C components, originating from V₂O₅ and graphene, consisting the composite. The graphene content of the RGB–V₂O₅ composite, measured by thermogravimetric analysis, was approximately 5 wt %. The initial discharge and charge capacities of RGB–V₂O₅ composite were 282 and 280 mA h g^?1, respectively, and the corresponding Coulombic efficiency was approximately 100 %. On the other hand, the initial discharge and charge capacities of macroporous V₂O₅ powders were 205 and 221 mA h g^?1, respectively, and the corresponding Coulombic efficiency was approximately 93 %. The RGB–V₂O₅ composite showed a better rate performance than the macroporous V₂O₅ powders.     

Vanadium oxide gels as electrode materials for lithium batteries

Electrochemical lithium insertion has been studied in a large number of vanadium oxides with three dimensional framework structure. Several of these oxides have shown high capacities for lithium insertion and good reversibility.Pure solutions of decavanadic acid have shown to undergo spontaneous polycondensation reaction forming sols or gels of highly polymerized vanadium oxides, M _w 10⁶. After dehydration a series of xerogels with varying amounts of water, V₂O₅ · nH₂O, can be obtained. The structure of these xerogels consists of ribbons of corner and edge sharing VO₆ octahedra stabilized by interlayer water molecules. Under ambient conditions the water content corresponds to n=1.8, but this value can be reversibly changed under mild drying conditions.This report deals with the electrochemical insertion of lithium in dried vanadium oxide xerogels, with special regard to the use of these materials as electrodes in rechargeable lithium batteries.     

P2结构层状复合金属氧化物钠离子电池正极材料

目前,碱金属(锂、钠、钾等)离子电池中的锂离子电池已经广泛应用于社会生产生活的各个方面,有力地支撑了社会的自动化、信息化和智能化。然而,由于锂在地壳中的丰度较低,以较高丰度的钠为基础的钠离子电池引起了研究者和社会的广泛关注。其中,正极材料是制约钠离子电池实用化的重要因素之一,人们需要开发出面向实际应用的正极材料。P2结构层状复合金属氧化物钠离子电池正极材料具有资源丰富、制备简单、结构稳定、放电容量高、倍率性能好和循环稳定性较好等优点,获得了研究者的广泛关注,具有实用化前景。这一系列材料由于涉及到多种过渡金属元素的组合,较为复杂。本文针对含单一过渡金属、二元组分过渡金属、三元及以上组分过渡金属的P2结构材料及其优化改性进行了系统性梳理,力求厘清研究脉络,梳理研究思路,并给出了今后发展的方向与预测。P2结构材料的主要问题是提高其初始放电容量,氧还原的应用是解决这一问题的重要方向。此外,优化材料组分及采用具有丰富储量、低成本、高安全性和环境友好性的原材料是进一步降低成本并保护环境的重要研究方向。     

Synthetic beta‐K0.33V2O5 Nanorods: A Metal–Insulator Transition in Vanadium Oxide Bronze

We found a linear relationship between the metal–insulator transition (MIT) temperature and the A⁺ ionic radius of the beta‐A_0.33V₂O₅ bronze family, leading our attention to beta‐K_0.33V₂O₅ which has been neglected for a long time. We have introduced a facile hydrothermal method to obtain the single‐crystalline beta‐K_0.33V₂O₅ nanorods. As expected, both the temperature‐dependence of the resistivity and magnetization demonstrated MITs at about 72 K for beta‐K_0.33V₂O₅, thus matching well with the linear relationship described above. The beta‐K_0.33V₂O₅ was assigned as a new member of the beta‐A_0.33V₂O₅ bronze family for their similar crystal and electronic structures and their MIT property; this addition enriches the beta‐A_0.33V₂O₅ bronze family.     

Thermal‐Gated Polymer Electrolytes for Smart Zinc‐Ion Batteries

Smart self‐protection is essential for addressing safety issues of energy‐storage devices. However, conventional strategies based on sol‐gel transition electrolytes often suffer from unstable self‐recovery performance. Herein, smart separators based on thermal‐gated poly(N‐isopropylacrylamide) (PNIPAM) hydrogel electrolytes were developed for rechargeable zinc‐ion batteries (ZIBs). Such PNIPAM‐based separators not only display a pore structure evolution from opened to closed states, but also exhibit a surface wettability transition from hydrophilic to hydrophobic behaviors when the temperature rises. This behavior can suppress the migration of electrolyte ions across the separators, realizing the self‐protection of ZIBs at high temperatures. Furthermore, the thermal‐gated behavior is highly reversible, even after multiple heating/cooling cycles, because of the reversibility of temperature‐dependent structural evolution and hydrophilic/hydrophobic transition. This work will pave the way for designing thermal‐responsive energy‐storage devices with safe and controlled energy delivery.     

High‐Entropy Layered Oxide Cathodes for Sodium‐Ion Batteries

Material innovation on high‐performance Na‐ion cathodes and the corresponding understanding of structural chemistry still remain a challenge. Herein, we report a new concept of high‐entropy strategy to design layered oxide cathodes for Na‐ion batteries. An example of layered O3‐type NaNi_0.12Cu_0.12Mg_0.12Fe_0.15Co_0.15Mn_0.1Ti_0.1Sn_0.1Sb_0.04O₂ has been demonstrated, which exhibits the longer cycling stability (ca. 83 % of capacity retention after 500 cycles) and the outstanding rate capability (ca. 80 % of capacity retention at the rate of 5.0 C). A highly reversible phase‐transition behavior between O3 and P3 structures occurs during the charge‐discharge process, and importantly, this behavior is delayed with more than 60 % of the total capacity being stored in O3‐type region. Possible mechanism can be attributed to the multiple transition‐metal components in this high‐entropy material which can accommodate the changes of local interactions during Na⁺ (de)intercalation. This strategy opens new insights into the development of advanced cathode materials.     

Synthesis of Polyaniline‐Vanadium Oxide Nanocomposite Nanosheets

Summary: Polyaniline‐vanadium oxide nanocomposite nanosheets with thickness between 10 and 20 nm, and lateral dimensions in the range of hundreds of nanometers to several microns have been synthesized by in situ intercalation polymerization of aniline with layered V₂O₅ under hydrothermal conditions. The product was characterized by field‐emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR) spectroscopy, and X‐ray diffractometer (XRD). The effects of the concentration of aniline and reaction temperature on the morphologies of polyaniline‐vanadium oxide nanocomposites have also been investigated.

SEM image of tremella‐like polyaniline‐vanadium oxide nanocomposite nanosheets.     

一种新型的碳复合钼掺杂的钒氧化物纳米线钠离子电池正极材料

近年来,由于锂资源逐渐紧缺而导致其成本增加,锂离子电池发展受到了限制. 作为一个有潜力的替代者,有着相似电化学机制且成本较低的钠离子电池则发展迅速. 但由于钠离子与锂离子相较有着更大半径,在钠离子脱嵌过程中,对大多数电极材料的晶体结构破坏严重. 因此,开发新型电极材料对钠离子电池的进一步发展尤为重要. 其中,层状钒氧化物作为正极材料被广泛研究. 在这项工作中,作者基于钒氧化物,引入钼元素并与碳复合,首次设计合成了一种新型的碳复合钼掺杂的钒氧化物纳米线电极材料,并获得了优良的电化学性能（在50 mA•g^-1的电流密度下,最高放电比容量达135.9 mAh•g^-1,并在循环75次后仍有82.6mAh•g^-1的可逆容量,容量保持率高达71.8%;在1000mA•g^-1的高电流密度下循环并回到50mA•g^-1后,可逆放电比容量仍能回复至111.5mAh•g^-1）. 本工作的研究结果证明,这种具有超大层间距的新型碳复合钼掺杂的钒氧化物纳米线是一种非常有潜力的储钠材料,并且我们的工作为钠离子电池的进一步发展提供了一定的理论基础.     

Ascorbic Acid‐Assisted Synthesis of Mesoporous Sodium Vanadium Phosphate Nanoparticles with Highly sp2‐Coordinated Carbon Coatings as Efficient Cathode Materials for Rechargeable Sodium‐Ion Batteries

Herein, mesoporous sodium vanadium phosphate nanoparticles with highly sp²‐coordinated carbon coatings (meso‐Na₃V₂(PO₄)₃/C) were successfully synthesized as efficient cathode material for rechargeable sodium‐ion batteries by using ascorbic acid as both the reductant and carbon source, followed by calcination at 750 °C in an argon atmosphere. Their crystalline structure, morphology, surface area, chemical composition, carbon nature and amount were systematically explored. Following electrochemical measurements, the resultant meso‐Na₃V₂(PO₄)₃/C not only delivered good reversible capacity (98 mAh g^?1 at 0.1 A g^?1) and superior rate capability (63 mAh g^?1 at 1 A g^?1) but also exhibited comparable cycling performance (capacity retention: ≈74 % at 450 cycles at 0.4 A g^?1). Moreover, the symmetrical sodium‐ion full cell with excellent reversibility and cycling stability was also achieved (capacity retention: 92.2 % at 0.1 A g^?1 with 99.5 % coulombic efficiency after 100 cycles). These attributes are ascribed to the distinctive mesostructure for facile sodium‐ion insertion/extraction and their continuous sp²‐coordinated carbon coatings, which facilitate electronic conduction.     

Multiple Active Sites: Lithium Storage Mechanism of Cu‐TCNQ as an Anode Material for Lithium‐Ion Batteries

Recently, carboxylate metal‐organic framework (MOF) materials were reported to perform well as anode materials for lithium‐ion batteries (LIBs); however, the presumed lithium storage mechanism of MOFs is controversial. To gain insight into the mechanism of MOFs as anode materials for LIBs, a self‐supported Cu‐TCNQ (TCNQ: 7,7,8,8‐tetracyanoquinodimethane) film was fabricated via an in situ redox routine, and directly used as electrode for LIBs. The first discharge and charge specific capacities of the self‐supported Cu‐TCNQ electrode are 373.4 and 219.4 mAh g^?1, respectively. After 500 cycles, the reversible specific capacity of Cu‐TCNQ reaches 280.9 mAh g^?1 at a current density of 100 mA g^?1. Mutually validated data reveal that the high capacity is ascribed to the multiple‐electron redox conversion of both metal ions and ligands, as well as the reversible insertion and desertion of Li⁺ ions into the benzene rings of ligands. This work raises the expectation for MOFs as electrode materials of LIBs by utilizing multiple active sites and provides new clues for designing improved electrode materials for LIBs.     

Ultrasound‐Assisted Synthesis of Hybrid Vanadium Oxide/Polyaniline Nanowires

A single‐step sonochemical procedure to synthesize hybrid vanadium oxide/polyaniline nanowires starting from crystalline V₂O₅ and aniline in aqueous medium is presented. The synthesis explores the effect of high power ultrasounds on heterogeneous solid–aqueous phases, which leads to 30 nm width wires of 5 to 10 µm in length. Monomer intercalation and oxidative polymerization within the inorganic matrix proceed simultaneously with morphological changes. The electronic conductivity of hybrid nanowires reaches 0.8 S · cm⁻¹ at room temperature.

     

ICP-AES法测定氧化铝粉中硅、钙、铁、钛、钒和锌

采用高压盐酸消化，电感耦合等发射光谱法测定氧化铝中硅、钙、铁、钛、钒和锌等6元素，研究了铝基体对被测元素的影响，并选择了最佳工作条件，被测元素的检出限为0．34－52ng/mL，样品加标回收率为95．7％－108．6％。