Iron(III), cobalt(II) and copper(II) complexes bearing 8‐quinolinol encapsulated in zeolite?Y for the aerobic oxidation of styrene

A series of Fe(III), Co(II) and Cu(II) complexes of 8‐quinolinol were encapsulated into the supercages of zeolite? Y and characterized by X‐ray diffraction, SEM, N₂ adsorption/desorption, FT‐IR, UV–vis spectroscopy, elemental analysis, ICP‐AES and TG/DSC measurements. The encapsulation was achieved by a flexible ligand method in which the transition metal cations were first ion‐exchanged into zeolite Y and then complexed with 8‐quinolinol ligand. The metal‐exchanged zeolites, metal complexes encapsulated in zeolite–Y plus non‐encapsulated homogeneous counterparts were all screened as catalysts for the aerobic oxidation of styrene under mild conditions. It was found that the encapsulated complexes always showed better activity than their respective non‐encapsulated counterparts. Moreover, the encapsulated iron complex showed good recoverability without significant loss of activity and selectivity within successive runs. Heterogeneity test for this catalyst confirmed its high stability against leaching of active complex species into solution. Copyright © 2011 John Wiley & Sons, Ltd.     

Asymmetric reactions on chiral catalysts entrapped within a mesoporous cage

The encapsulation of homogeneous chiral catalysts, e.g. Co(Salen) and Ru-TsDPEN, in the mesoporous cage of SBA-16 is demonstrated; the encapsulated catalysts show performance as good as that of the homogeneous catalysts, and can be recycled for more than 10 times without significant loss of catalytic performance.     

Influence of Pore Structure on Catalytic Properties of Mesoporous Silica-supported Co-B Amorphous Alloys in Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol

Co‐B amorphous alloy catalysts supported on three kinds of mesoporous silica (common SiO₂, MCM‐41 and SBA‐15) have been systematically studied focusing on the effect of pore structure on the catalytic properties in liquid‐phase hydrogenation of cinnamaldehyde to cinnamyl alcohol (CMO). Structural characterization of a series of different catalysts was performed by means of N₂ adsorption, X‐ray diffraction, transmission electron microscopy, hydrogen chemisorption, and X‐ray photoelectron spectroscopy. Various characterizations revealed that the pore structure of supports profoundly influenced the particle size, location and dispersion degree of Co‐B amorphous alloys. Co‐B/SBA‐15 was found more active and selective to CMO than either Co‐B/SiO₂ or Co‐B/MCM‐41. The superior catalytic activity could be attributed to the higher active surface area, because most of Co‐B nanoparticles in Co‐B/SBA‐15 were located in the ordered pore channels of SBA‐15 rather than on the external surface as found in Co‐B/SiO₂ and Co‐B/MCM‐41. Meanwhile, the geometrical confinement effect of the ordered mesoporous structure of SBA‐15 was considered to be responsible for the enhanced selectivity to CMO on Co‐B/SBA‐15, inhibiting the further hydrogenation of CMO to hydrocinnamyl alcohol.     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

Textural manipulation of mesoporous materials for hosting of metallic nanocatalysts

The preparation and stabilization of nanoparticles are becoming very crucial issues in the field of so-called "nanocatalysis". Recent developments in supramolecular self-assembled porous materials have opened a new way to get nanoparticles hosted in the channels of such materials. In this paper, a new approach towards monodisperse and thermally stable metal nanoparticles by confining them in ordered mesoporous materials is presented, and three aspects are illustrated. Firstly, the recent progress in the functional control of mesoporous materials will be briefly introduced, and the rational tuning of the textures, pore size, and pore length is demonstrated by controlling supramolecular self-assembly behavior. A novel synthesis of short-pore mesoporous materials is emphasized for their easy mass transfer in both biomolecule absorption and the facile assembly of metal nanocomposites within their pore channels. In the second part, the different routes for encapsulating monodisperse nanoparticles inside channels of porous materials are discussed, which mainly includes the ion-exchange/conventional incipient wetness impregnation, in situ encapsulation routes, organometallic methodologies, and surface functionalization schemes. A facile in situ autoreduction route is highlighted to get monodisperse metal nanoparticles with tunable sizes inside the channels of mesoporous silica. Finally, confinement of mesoporous materials is demonstrated to improve the thermal stability of monodisperse metal nanoparticles catalysts and a special emphasis will be focused on the stabilization of the metal nanoparticles with a low Tammann temperature. Several catalytic reactions concerning the catalysis of nanoparticles will be presented. These uniform nanochannels, which confine monodisperse and stable metal nanoparticles catalysts, are of great importance in the exploration of size-dependent catalytic chemistry and further understanding the nature of catalytic reactions.     

Pd(OAc)2@SBA‐15/PrEn nanoreactor: a highly active,reusable and selective phosphine‐free catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous media

A series of ordered mesoporous organic–inorganic hybrid material was designed by using the amine‐functionalized SBA‐15 (PdX₂@SBA‐15/N_Y, Y = 1, 2) as solid support for palladium complexes. Among them, the Pd(OAc)₂/ethylenediamine complex encapsulated into SBA‐15 (Pd(OAc)₂@SBA‐15/PrEn or Pd(OAc)₂@SBA‐15/PrNHEtNH₂) exhibits higher activity and selectivity toward Suzuki cross‐coupling reaction under aerobic conditions and water solvent mixture. The SBA‐15/PrEn supported palladium pre‐catalyst could be separated easily from reaction products and used repetitively several times, showing its superiority over homogeneous catalysts for industrial and chemical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Ruthenium Carbenes Supported on Mesoporous Silicas as Highly Active and Selective Hybrid Catalysts for Olefin Metathesis Reactions under Continuous Flow

In the search for a highly active and selective heterogenized metathesis catalyst, we systematically varied the pore geometry and size of various silica‐based mesoporous (i.e., MCM‐41, MCM‐48, and SBA‐15) and microporous (ZSM‐5 and MWW) versus macroporous materials (D11‐10 and Aerosil 200), besides other process parameters (temperature, dilution, and mean residence time). The activity and, especially, selectivity of such “linker‐free” supports for ruthenium metathesis catalysts were evaluated in the cyclodimerization of cis‐cyclooctene to form 1,9‐cyclohexadecadiene, a valuable intermediate in the flavor and fragrance industry. The optimized material showed not only exceptionally high selectivity to the valuable product, but also turned out to be a truly heterogeneous catalyst with superior activity relative to the unsupported homogeneous complex.     

Metal Nanoparticles Syntheses on Ionic Liquids Functionalized Mesoporous Silica SBA‐15

Supported metal nanoparticles hold great promise in heterogeneous catalysis as active and reusable catalysts for various organic transformations. Preparation methods of metal nanoparticles with excellent control over size, shape, and morphology on supports has significantly advanced to improve the performances of the resulting catalysts. Here, we aim to discuss the development of supported metal nanoparticles on mesoporous silica SBA‐15 in the presence of immobilized ionic liquids mostly based on examples from the previously reported results. This review highlights the preparation methods for size‐controlled syntheses and the immobilization of metal nanoparticles on solid supports, especially SBA‐15 by various techniques.     

Tungsten doped mesoporous SBA‐16 as novel heterogeneous catalysts for oxidation of cyclopentene to glutaric acid

Novel heterogeneous tungsten species in mesoporous silica SBA‐16 catalysts based on ship‐in‐a‐bottle methodology are originally reported for oxidizing cyclopentene (CPE) to glutaric acid (GAC) using hydrogen peroxide (H₂O₂). For all W‐SBA‐16 catalysts, isolated tungsten species and octahedrally coordinated tungsten oxide species are observed while WO₃ crystallites are detected for the W‐SBA‐16 catalysts with Si/ W = 5, 10, and 20. The specific surface areas and the corresponding total pore volumes decrease significantly as increasing amounts of tungsten incorporated into the pores of SBA‐16. Using tungsten‐substituted mesoporous SBA‐16 heterogeneous catalysts, high yield of GAC (55%) is achieved with low tungsten loading (for Si/W = 30, ~13 wt%) for oxidation of CPE. The W‐SBA‐16 catalysts with Si/W = 30 can be reused five times without dramatic deactivation. In fact, low catalytic activity provided by bulk WO₃ implies that the highly distributed tungsten species in SBA‐16 and the steric confinement effect of SBA‐16 are key elements for the outstanding catalytic performance.     

Alkane Oxidation by an Immobilized Nickel Complex Catalyst: Structural and Reactivity Differences Induced by Surface‐Ligand Density on Mesoporous Silica

Immobilized nickel catalysts SBA*‐ L ‐x/Ni ( L =bis(2‐pyridylmethyl)(1H‐1,2,3‐triazol‐4‐ylmethyl)amine) with various ligand densities ( L content (x)=0.5, 1, 2, 4 mol % Si) have been prepared from azidopropyl‐functionalized mesoporous silicas SBA‐N₃‐x. Related homogeneous ligand LtBu and its Ni^II complexes, [Ni( LtBu )(OAc)₂(H₂O)] ( LtBu /Ni) and [Ni( LtBu )₂]BF₄ (2 LtBu /Ni), have been synthesized. The L /Ni ratio (0.9–1.7:1) in SBA*‐ L ‐x/Ni suggests the formation of an inert [Ni L ₂] site on the surface at higher ligand loadings. SBA*‐ L ‐x/Ni has been applied to the catalytic oxidation of cyclohexane with m‐chloroperbenzoic acid (mCPBA). The catalyst with the lowest loading shows high activity in its initial use as the homogeneous LtBu /Ni catalyst, with some metal leaching. As the ligand loading increases, the activity and Ni leaching are suppressed. The importance of site‐density control for the development of immobilized catalysts has been demonstrated.     

Encapsulation of tetraazamacrocyclic complexes of cobalt(II), copper(II) and oxovanadium(IV) in zeolite-Y and their use as catalysts for the oxidation of styrene

Encapsulation of tetraazamacrocyclic complexes of Co(II), Cu(II) and V(IV) into zeolite-Y has been accomplished, and the resulting materials were used as heterogeneous catalysts for aerobic oxidation of styrene. The materials were prepared by a ship-in-a-bottle method, in which the transition metal cations were first ion-exchanged into zeolite-Y and then reacted with ethylenediamine, followed by acetylacetone. The pure tetraazamacrocyclic complexes were characterized by FTIR, solid UV–Vis and elemental analysis. The structural integrity throughout the immobilization procedure, the successful immobilization of the macrocyclic complexes, and the loadings of metal ions and macrocyclic ligands were determined by characterization techniques such as FTIR, diffuse reflection UV–Vis, inductively coupled plasma atomic emission spectroscopy, scanning electron microscopy, TG/DTA and powder X-ray diffraction. Compared with their homogeneous analogues, the catalytic properties of the encapsulated macrocyclic complexes in the oxidation of styrene with air were investigated. The immobilized complexes proved to be active catalysts and could be reused without significant loss in activity.     

Dioxovanadium(V) complexes of Schiff and tetrahydro-Schiff bases encapsulated in zeolite-Y for the aerobic oxidation of styrene

A series of dioxovanadium(V) complexes of Schiff and tetrahydro-Schiff bases were encapsulated into the supercages of zeolite-Y and were characterized by X-ray diffraction, SEM, N₂ adsorption/desorption, FT-IR, UV-vis spectroscopy, ICPAES, pair distribution function (PDF) and X-ray absorption near edge structure (XANES) measurements. The encapsulation is achieved by a flexible ligand method in which the transition metal cations were first ion-exchanged into zeolite-Y and then complexed with ligands. The dioxovanadium-exchanged zeolite, dioxovanadium complexes encapsulated in zeolite-Y plus non-encapsulated homogeneous counterparts were all screened as catalysts for the aerobic oxidation of styrene under mild conditions. It was found that the encapsulated complexes showed better activity than their respective nonencapsulated counterparts in most cases. All encapsulated dioxovanadium tetrahydro-Schiff base complexes showed much higher activity in aerobic oxidation of styrene than their corresponding Schiff base complexes.     

Epoxidation of cyclohexene with H2O2 over efficient water‐tolerant heterogeneous catalysts composed of mono‐substituted phosphotungstic acid on co‐functionalized SBA‐15

A series of Keggin‐type heteropolyacid‐based heterogeneous catalysts (Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15) were synthesized via immobilized transition metal mono‐ substituted phosphotungstic acids (Co‐/Fe‐/Cu‐POM) on octyl‐amino‐co‐functionalized mesoporous silica SBA‐15 (octyl‐NH₂‐SBA‐15). Characterization results indicated that Co‐/Fe‐/Cu‐POM units were highly dispersed in mesochannels of SBA‐15, and both types of Brønsted and Lewis acid sites existed in Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15 catalysts. Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst showed excellent catalytic performance in H₂O₂‐mediated cyclohexene epoxidation with 83.8% of cyclohexene conversion, 92.8% of cyclohexene oxide selectivity, and 98/2 of epoxidation/allylic oxidation selectivity. The order of catalytic activity was Co‐POM‐octyl‐NH₃‐SBA‐15 > Fe‐POM‐octyl‐NH₃‐SBA‐15 > Cu‐POM‐octyl‐NH₃‐SBA‐15. In order to obtain insights into the role of ‐octyl moieties during catalysis, an octyl‐free catalyst (Co‐POM‐NH₃‐SBA‐15) was also synthesized. In comparison with Co‐POM‐NH₃‐SBA‐15, Co‐POM‐octyl‐NH₃‐SBA‐15 showed enhanced catalytic properties (viz. activity and selectivity) in cyclohexene epoxidation. Strong chemical bonding between ‐NH₃⁺ anchored on the surface of SBA‐15 and heteropolyanions resulted in excellent stability of Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst, and it could be reused six times without considerable loss of activity.     

Ordered mesoporous SBA‐15/PrSO3Pd and SBA‐15/PrSO3PdNP as active,reusable and selective phosphine‐free catalysts in CX activation Heck coupling process

The incorporation of sulfonate into mesoporous SBA‐15 molecular sieves as ligands for palladium ions was used. Then SBA‐15/PrSO₃Pd and SBA‐15/PrSO₃Pd_NP were prepared and applied for the Heck arylation reaction of conjugate alkenes with aryl halides, to afford corresponding cross‐coupling products under phosphine‐free aerobic conditions with good to excellent yields. These supported palladium pre‐catalysts could be separated easily from reaction products and reused several times, showing superiority over homogeneous catalysts for industrial and chemical applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Mesoporous silica SBA-15 sheet with perpendicular nanochannels

Free-standing thin sheet form of mesoporous silica materials with perpendicular orientation is a much desired materials for its possible applications in catalysis, mask, and separation. A three component amphiphile system of sodium dodecyl sulfate/hexadecyltrimethylammonium bromide/pluronic-123(C(16)TMAB/SDS/P123) was employed to template the condensation of sodium silicates for the formation of SBA(⊥), a thin sheet of SBA-15 with perpendicular nanochannels. SBA(⊥) can be synthesized at SDS/C(16)TMAB=1.5 and T≥40°C and shows pH-dependent morphology. It has uniform pore size ～9 nm, homogeneous sheet thickness in the range of 60-300 nm and dimension of several microns. We studied in details the structure and morphology of the SBA(⊥) with variation of three experimental parameters: the SDS/C(16)TMAB ratio, the temperature, and the pH condition in the synthetic gel. It is proposed that the mixed surfactants of SDS and C(16)TMAB form catanionic vesicle in which the P123 and silicates are condensed. The balanced interaction of P123/silicate with the narrow confinement under surfactant bi-layers of C(16)TMAB/SDS promoted the formation of perpendicular nanochannels. Low temperature and pH conditions favor stronger segregation of the PPO and PEO-oligosilicate segments in the SBA(⊥) structure which gives the basis of thickness control of the sheet. The control of structure and morphology are discussed with modern theory of microphase separation in block copolymers under confinement.     

Vanadium complexes immobilized on solid supports and their use as catalysts for oxidation and functionalization of alkanes and alkenes

This review mainly discusses the immobilization strategies that have been used for vanadium complexes, typically mesoporous material, zeolites and polymers, the characterization procedures for the obtained materials, and their catalytic applications. The retention of the active metal compound within the catalyst may be based on (i) adsorption, (ii) the formation of covalent bonds between metal ligand and support, (iii) ion exchange, (iv) encapsulation, or (v) entrapment. The heterogenized complexes are used as catalysts for oxidations and functionalization of alkanes, alkenes and other substrates, and an account of the various applications reported is given.     

Bismuth‐Containing SBA‐15 Mesoporous Silica Catalysts for Solvent‐Free Liquid‐Phase Oxidation of Cyclohexane by Molecular Oxygen

Bismuth (Bi)‐containing SBA‐15 mesoporous silica catalysts, Bi/SBA‐15, with different Bi loadings were synthesized by a direct hydrothermal method. The materials were characterized in detail by various techniques. Powder‐X‐ray‐diffraction (PXRD), N₂‐adsorption/desorption, and transmission‐electron‐microscopic (TEM) analyses revealed that the well‐ordered hexagonal structure of SBA‐15 is maintained after Bi incorporation. Diffuse‐reflectance UV/VIS, Raman, and X‐ray photoelectron spectroscopy (XPS) showed that the incorporated Bi‐atoms are highly dispersed, most of them entering the internal surface of SBA‐15. The new, very stable catalysts were found to be highly efficient for the oxidation of cyclohexane in a solvent‐free system, molecular oxygen (O₂) being used as oxidant.     

Copper(II)–diaminosarcophagine‐functionalized SBA‐15: a heterogeneous nanocatalyst for the synthesis of benzimidazole,benzoxazole and benzothiazole derivatives under solvent‐free conditions

Solvent‐free organic reactions were studied over periodic mesoporous silica (SBA‐15) containing a Cu(II) organometallic complex. This heterogeneous catalyst was achieved by coordination of Cu(II) ions with the diaminosarcophagine ligand and then its grafting onto the surface of SBA‐15. This catalyst displayed ordered mesoporous channels, which implies an extremely high dispersion of the Cu(II) complex and the convenient diffusion of reactant molecules into the pore channels. Therefore, this catalyst can offer high activity and also facile separation or recycling when compared with its homogeneous counterparts. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Superacid‐Functionalized Mesoporous Nanocages with Tunable Pore Diameters and Their Application in the Synthesis of Coumarins

Here we demonstrate for the first time the preparation of a triflic acid (TFA)‐functionalized mesoporous nanocage with tunable pore diameters by the wet impregnation method. The obtained materials have been unambiguously characterized by XRD, N₂ adsorption, FTIR spectroscopy, and NH₃ temperature‐programmed desorption (TPD). From the characterization results, it has been found that the TFA molecules are firmly anchored on the surface of the mesoporous supports without affecting their acidity. We also demonstrate the effect of the pore and cage diameter of the KIT‐5 supports on the loading of TFA molecules inside the pore channels. It has been found that the total acidity of the materials increases with an increase in the TFA loading on the support, whereas the acidity of the materials decreases with an increase in the pore diameter of the support. The acidity of the TFA‐functionalized mesoporous nanocages is much higher than that of the zeolites and metal‐substituted mesoporous acidic catalysts. The TFA‐functionalized materials have also been employed as the catalysts for the synthesis of 7‐hydroxy‐4‐methylcoumarin by means of the Pechmann reaction under solvent‐free conditions. It has been found that the catalytic activity of the TFA‐functionalized KIT‐5 is much higher than that of zeolites and metal‐substituted mesoporous catalytic materials in the synthesis of coumarin derivatives. The stability of the catalyst is extremely good and can be reused several times without much loss of activity in the above reaction.     

Synthesis and Characterization of Gold Nanoparticle‐Functionalized Ordered Mesoporous Materials

We report the synthesis and characterization of three different ordered mesoporous materials, labeled MCM‐48, SBA‐155, and SBA‐16 type materials, which were functionalized with gold nanoparticles using three different strategies. The functionalization strategies can be categorized as (i) in situ growth of gold nanoparticles, (ii) template loading, and (iii) diffusion loading of prefabricated gold nanoparticles. Two different particle sizes were employed in the latter two strategies, 5 nm and 10 nm. For all mesoporous structures, functionalization strategies, and particle sizes attempted, the materials retained their long‐range order upon incorporation of nanoparticles. From the adsorption isotherms, incorporation of gold nanoparticles altered the pore structure of the mesoporous support of some of the SBA‐15 and SBA‐16 type materials, with the effect on incorporation on the pore structure being particle size dependent in most cases. The majority of gold nanoparticles were found to reside on the external surface of the materials regardless of substrate and functionalization strategy; however, for the in situ synthesis and the template loading strategies, a significant fraction of the particles was determined to reside within the pore system of the material. In situ growth resulted in the highest content of gold nanoparticles in the solid phase. The relative effectiveness in retaining gold nanoparticles in the solid phase for each functionalization strategy was determined to be, in descending order, in situ synthesis, template loading, and diffusion loading.