Metal–Organic Frameworks for Oxygen Storage

We present a systematic study of metal–organic frameworks (MOFs) for the storage of oxygen. The study starts with grand canonical Monte Carlo simulations on a suite of 10 000 MOFs for the adsorption of oxygen. From these data, the MOFs were down selected to the prime candidates of HKUST‐1 (Cu‐BTC) and NU‐125, both with coordinatively unsaturated Cu sites. Oxygen isotherms up to 30 bar were measured at multiple temperatures to determine the isosteric heat of adsorption for oxygen on each MOF by fitting to a Toth isotherm model. High pressure (up to 140 bar) oxygen isotherms were measured for HKUST‐1 and NU‐125 to determine the working capacity of each MOF. Compared to the zeolite NaX and Norit activated carbon, NU‐125 has an increased excess capacity for oxygen of 237 % and 98 %, respectively. These materials could ultimately prove useful for oxygen storage in medical, military, and aerospace applications.     

Metal–Organic Frameworks Based Electrocatalysts for the Oxygen Reduction Reaction

In view of the clean and sustainable energy, metal–organic frameworks (MOFs) based materials, including pristine MOFs, MOF composites, and their derivatives are emerging as unique electrocatalysts for oxygen reduction reaction (ORR). Thanks to their tunable compositions and diverse structures, efficient MOF‐based materials provide new opportunities to accelerate the sluggish ORR at the cathode in fuel cells and metal–air batteries. This Minireview first provides some introduction of ORR and MOFs, followed by the classification of MOF‐based electrocatalysts towards ORR. Recent breakthroughs in engineering MOF‐based ORR electrocatalysts are highlighted with an emphasis on synthesis strategy, component, morphology, structure, electrocatalytic performance, and reaction mechanism. Finally, some current challenges and future perspectives for MOF‐based ORR electrocatalysts are also discussed.     

Electrically Conductive Porous Metal–Organic Frameworks

Owing to their outstanding structural, chemical, and functional diversity, metal–organic frameworks (MOFs) have attracted considerable attention over the last two decades in a variety of energy‐related applications. Notably missing among these, until recently, were applications that required good charge transport coexisting with porosity and high surface area. Although most MOFs are electrical insulators, several materials in this class have recently demonstrated excellent electrical conductivity and high charge mobility. Herein we review the synthetic and electronic design strategies that have been employed thus far for producing frameworks with permanent porosity and long‐range charge transport properties. In addition, key experiments that have been employed to demonstrate electrical transport, as well as selected applications for this subclass of MOFs, will be discussed.     

Modulating the Electronic Structure of Porous Nanocubes Derived from Trimetallic Metal–Organic Frameworks to Boost Oxygen Evolution Reaction Performance

The preparation of noble metal‐free catalysts for water splitting is the key to low‐cost, sustainable hydrogen generation. Herein, through a pyrolysis‐oxidation process, we prepared a series of Co‐Fe‐Ni trimetallic oxidized carbon nanocubes (Co_1‐XFe_XNi‐OCNC) with a continuously changeable Co/Fe ratio (X=0, 0.1, 0.2, 0.5, 0.8, 0.9, 1). The Co_1‐XFe_XNi‐OCNC shows a volcano‐type oxygen evolution reaction (OER) activity. The optimized Co_0.1Fe_0.9Ni‐OCNC achieves a low overpotential of 268 mV at 10 mA cm^?2 with a very low Tafel slope of 48 mV dec^?1 in 1 m KOH. At the same time, the stability of the Co_0.1Fe_0.9Ni‐OCNC is also outstanding; after 1000 CV cycles, the LSV plot is almost coincident. Moreover, the potential remains almost of the same value at 10 mA cm^?2 after 12 h in comparison to the initial value. The excellent electrocatalytic properties can be attributed to the synergistic cooperation between each component. Therefore, the Co_0.1Fe_0.9Ni‐OCNC is a promising candidate instead of precious metal‐based electrocatalysts for OER.     

Nanoscale Metal–Organic Framework–Hemoglobin Conjugates

A metal–organic framework (MOF)–protein conjugate, NH₂‐MIL‐125(Ti)‐hemoglobin [MIL‐125(Ti)‐Hb], was synthesized by a covalent postmodification strategy. The crystalline structure was maintained after chemical and protein modification. The content of grafted Hb was tuned by the stoichiometric ratio and reached 50 wt % if the mass ratio of MIL‐125(Ti)/Hb was 1:1.25 in the feed. The oxygen‐transporting capacity of grafted Hb was kept, and the P₅₀ (the half O₂ pressure saturated with O₂) and Hill coefficients of the MIL‐125(Ti)‐Hb conjugate were found to be 22.9 mm Hg and 2.35, respectively, which are close to the respective values of free Hb. All the results indicate that the MIL‐125(Ti)‐Hb conjugate could be potentially used as an oxygen carrier.     

Defect‐Engineered Metal–Organic Frameworks

Defect engineering in metal–organic frameworks (MOFs) is an exciting concept for tailoring material properties, which opens up novel opportunities not only in sorption and catalysis, but also in controlling more challenging physical characteristics such as band gap as well as magnetic and electrical/conductive properties. It is challenging to structurally characterize the inherent or intentionally created defects of various types, and there have so far been few efforts to comprehensively discuss these issues. Based on selected reports spanning the last decades, this Review closes that gap by providing both a concise overview of defects in MOFs, or more broadly coordination network compounds (CNCs), including their classification and characterization, together with the (potential) applications of defective CNCs/MOFs. Moreover, we will highlight important aspects of “defect‐engineering” concepts applied for CNCs, also in comparison with relevant solid materials such as zeolites or COFs. Finally, we discuss the future potential of defect‐engineered CNCs.     

Advanced Bifunctional Oxygen Reduction and Evolution Electrocatalyst Derived from Surface‐Mounted Metal–Organic Frameworks

Metal–organic frameworks (MOFs) and their derivatives are considered as promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which are important for many energy provision technologies, such as electrolyzers, fuel cells and some types of advanced batteries. In this work, a “strain modulation” approach has been applied through the use of surface‐mounted NiFe‐MOFs in order to design an advanced bifunctional ORR/OER electrocatalyst. The material exhibits an excellent OER activity in alkaline media, reaching an industrially relevant current density of 200 mA cm^?2 at an overpotential of only ≈210 mV. It demonstrates operational long‐term stability even at a high current density of 500 mA cm^?2 and exhibits the so far narrowest “overpotential window” ΔE_ORR‐OER of 0.69 V in 0.1 m KOH with a mass loading being two orders of magnitude lower than that of benchmark electrocatalysts.     

From Metal–Organic Frameworks to Single‐Atom Fe Implanted N‐doped Porous Carbons: Efficient Oxygen Reduction in Both Alkaline and Acidic Media

It remains highly desired but a great challenge to achieve atomically dispersed metals in high loadings for efficient catalysis. Now porphyrinic metal–organic frameworks (MOFs) have been synthesized based on a novel mixed‐ligand strategy to afford high‐content (1.76 wt %) single‐atom (SA) iron‐implanted N‐doped porous carbon (Fe_SA‐N‐C) via pyrolysis. Thanks to the single‐atom Fe sites, hierarchical pores, oriented mesochannels and high conductivity, the optimized Fe_SA‐N‐C exhibits excellent oxygen reduction activity and stability, surpassing almost all non‐noble‐metal catalysts and state‐of‐the‐art Pt/C, in both alkaline and more challenging acidic media. More far‐reaching, this MOF‐based mixed‐ligand strategy opens a novel avenue to the precise fabrication of efficient single‐atom catalysts.     

Bimetallic Metal‐Organic Framework‐Derived Nanosheet‐Assembled Nanoflower Electrocatalysts for Efficient Oxygen Evolution Reaction

Non‐noble metal‐based metal–organic framework (MOF)‐derived electrocatalysts have recently attracted great interest in the oxygen evolution reaction (OER). Here we report a facile synthesis of nickel‐based bimetallic electrocatalysts derived from 2D nanosheet‐assembled nanoflower‐like MOFs. The optimized morphologies and large Brunauer–Emmett–Teller (BET) surface area endow FeNi@CNF with efficient OER performance, where the aligned nanosheets can expose abundant active sites and benefit electron transfer. The complex nanoflower morphologies together with the synergistic effects between two metals attributed to the OER activity of the Ni‐based bimetallic catalysts. The optimized FeNi@CNF afforded an overpotential of 356 mV at a current density of 10 mA cm^?2 with a Tafel slope of 62.6 mV dec^?1, and also exhibited superior durability with only slightly degradation after 24 hours of continuous operation. The results may inspire the use of complex nanosheet‐assembled nanostructures to explore highly active catalysts for various applications.     

Photochromic Metal–Organic Frameworks: Reversible Control of Singlet Oxygen Generation

The controlled generation of singlet oxygen is of great interest owing to its potential applications including industrial wastewater treatment, photochemistry, and photodynamic therapy. Two photochromic metal–organic frameworks, PC‐PCN and SO‐PCN, have been developed. A photochromic reaction has been successfully realized in PC‐PCN while maintaining its single crystallinity. In particular, as a solid‐state material which inherently integrates the photochromic switch and photosensitizer, SO‐PCN has demonstrated reversible control of ¹O₂ generation. Additionally, SO‐PCN shows catalytic activity towards photooxidation of 1,5‐dihydroxynaphthalene.     

Hierarchical Integration of Photosensitizing Metal–Organic Frameworks and Nickel‐Containing Polyoxometalates for Efficient Visible‐Light‐Driven Hydrogen Evolution

Metal–organic frameworks (MOFs) provide a tunable platform for hierarchically integrating multiple components to effect synergistic functions that cannot be achieved in solution. Here we report the encapsulation of a Ni‐containing polyoxometalate (POM) [Ni₄(H₂O)₂(PW₉O₃₄)₂]^10? ( Ni₄P₂ ) into two highly stable and porous phosphorescent MOFs. The proximity of Ni₄P₂ to multiple photosensitizers in Ni₄P₂ @MOF allows for facile multi‐electron transfer to enable efficient visible‐light‐driven hydrogen evolution reaction (HER) with turnover numbers as high as 1476. Photophysical and electrochemical studies established the oxidative quenching of the excited photosensitizer by Ni₄P₂ as the initiating step of HER and explained the drastic catalytic activity difference of the two POM@MOFs. Our work shows that POM@MOF assemblies not only provide a tunable platform for designing highly effective photocatalytic HER catalysts but also facilitate detailed mechanistic understanding of HER processes.     

Switching in Metal–Organic Frameworks

In recent years, metal–organic frameworks (MOFs) have become an area of intense research interest because of their adjustable pores and nearly limitless structural diversity deriving from the design of different organic linkers and metal structural building units (SBUs). Among the recent great challenges for scientists include switchable MOFs and their corresponding applications. Switchable MOFs are a type of smart material that undergo distinct, reversible, chemical changes in their structure upon exposure to external stimuli, yielding interesting technological applicability. Although the process of switching shares similarities with flexibility, very limited studies have been devoted specifically to switching, while a fairly large amount of research and a number of Reviews have covered flexibility in MOFs. This Review focuses on the properties and general design of switchable MOFs. The switching activity has been delineated based on the cause of the switching: light, spin crossover (SCO), redox, temperature, and wettability.     

Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe‐MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two‐electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs‐300 exhibits the highest activity for ORR with near‐zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high‐yield H₂O₂ production rate of 6.5 mol g_cat^?1 h^?1 has also been achieved by MOF NSs‐300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs‐300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.     

Electric‐Field Assisted In Situ Hydrolysis of Bulk Metal–Organic Frameworks (MOFs) into Ultrathin Metal Oxyhydroxide Nanosheets for Efficient Oxygen Evolution

Facile preparation of low‐cost electrocatalysts for efficient oxygen evolution reaction (OER) remains a big challenge. Herein, a novel strategy for ultrafast (20 s) transformation of bulk metal–organic frameworks (MOFs) into ultrathin metal oxyhydroxide nanosheets for efficient OER has been developed. For two isomeric MOFs ( FJI‐H25Fe and FJI‐H25FeCo ), only the metastable FJI‐H25FeCo bulk can immediately transform into FeCo‐oxyhydroxides nanosheets through electric‐field assisted hydrolysis. The potential evolution process from MOF bulk to FeCo‐oxyhydroxides nanosheets has been investigated in detail. The as‐made nanosheets exhibit excellent OER performances, showing an extremely low overpotential of 231 mV at the current density of 10 mA cm^?2, a relatively small Tafel slope of 42 mV dec^?1, and long‐term durability of at least 30 h. This work not only provides a novel strategy for facile preparation of low‐cost and efficient OER electrocatalysts, but also represents a new way for preparation of metal oxyhydroxides nanosheets with good crystallinity and morphology, and a fresh method for mild synthesis of nanosized derivatives from MOF materials.     

Chiral Metal–Organic Frameworks Bearing Free Carboxylic Acids for Organocatalyst Encapsulation

Two chiral carboxylic acid functionalized micro‐ and mesoporous metal–organic frameworks (MOFs) are constructed by the stepwise assembly of triple‐stranded heptametallic helicates with six carboxylic acid groups. The mesoporous MOF with permanent porosity functions as a host for encapsulation of an enantiopure organic amine catalyst by combining carboxylic acids and chiral amines in situ through acid–base interactions. The organocatalyst‐loaded framework is shown to be an efficient and recyclable heterogeneous catalyst for the asymmetric direct aldol reactions with significantly enhanced stereoselectivity in relative to the homogeneous organocatalyst.     

Microporous Metal–Organic Frameworks for Gas Separation

Microporous metal–organic frameworks (MOFs) are comparatively new porous materials. Because the pores within such MOFs can be readily tuned through the interplay of both metal‐containing clusters and organic linkers to induce their size‐selective sieving effects, while the pore surfaces can be straightforwardly functionalized to enforce their different interactions with gas molecules, MOF materials are very promising for gas separation. Furthermore, the high porosities of such materials can enable microporous MOFs with optimized gas separation selectivity and capacity to be targeted. This Focus Review highlights recent significant advances in microporous MOFs for gas separation.     

Metal–Covalent Organic Frameworks (MCOFs): A Bridge Between Metal–Organic Frameworks and Covalent Organic Frameworks

Many sophisticated chemical and physical properties of porous materials strongly rely on the presence of the metal ions within the structures. Whereas homogeneous distribution of metals is conveniently realized in metal–organic frameworks (MOFs), the limited stability potentially restricts their practical implementation. From that perspective, the development of metal–covalent organic frameworks (MCOFs) may address these shortcomings by incorporating active metal species atop highly stable COF backbones. This Minireview highlights examples of MCOFs that tackle important issues from their design, synthesis, characterization to cutting‐edge applications.     

Unusual Interlocking and Interpenetration Lead to Highly Porous and Robust Metal–Organic Frameworks

Stop the breathing : As the organic bridging ligands become more elaborate and large, the resulting MOFs tend to experience significant framework distortion (i.e., breathing) upon solvent removal. Rigidification of MOFs that are built from elongated tetracarboxylate bridging ligands by unusual interlocking and interpenetration leads to highly porous and robust hybrid materials.