基于1,2-二氢-2-(4-羧基苯基-4-[4-(4-羧基苯氧基)-3-甲基苯基](2H)二氮杂萘-1-酮的新型芳香聚酰胺的简易合成

A new monomer diacid, 1,2-dihydro-2-(4-carboxylphenyl)-4-[4-(4-carboxylphenoxy)-3-methylphenyl]phtha-lazin-1-one (3), was synthesized through the aromatic nucleophilic substitution reaction of a readily available unsymmetrical phthalazinone 1 bisphenol-like with p-chlorobenzonitrile in the presence of potassium carbonate in N,N-dimethylacetamide and alkaline hydrolysis. The diacid could be directly polymerized with various aromatic diamines 4a-4e using triphenyl phosphite and pyridine as condensing agents to give five new aromatic poly(ether amide)s 5a-5e containing the kink non-coplanar heterocyclic units with inherent viscosities of 1.30-1.54 dL/g.The polymers were readily soluble in a variety of solvents such as N,N-dimethylformamide (DMF), N,N-dimethyl-acetamide (DMA), dimethylsulfoxide (DMSO), N-methyl-2-pyrrolidinone (NMP), and even in m-cresol and pyridine (Py). The transparent, flexible and tough films could be formed by solution casting. The glass transition tem-peratures Tg were in the range of 286-317℃.     

Synthesis of novel poly(aryl ether amide)s containing the phthalazinone moiety

Two novel heterocyclic diamine monomers: 1,2-dihydro-2-(4-aminophenyl)-4-[ 4-( 4-aminophenoxy) phenyl ]-(2H )-phtha-lazin-1-one and 1, 2-dihydro-2-( 4-aminophenyl )-4-[ 4-( 4-aminophenoxy) -3, 5-dimethylphenyl ] - (2H) -phthalazin-1-one were successfully synthesized using readily available heterocyclic bisphenol-like monomers through two steps in high yield. A series of novel poly( aryl ether amide)s containing the phthalazinone moiety with inherent viscosities of 1.16-1.67 dL/g were prepared by the direct polymerization of the novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in a variety of solvents such as N, N-dimethyl-formamide (DMF), N,N-dimethylacetamide (DMAc), dimethylsulfoxide ( DMSO ), N-methyl-2-pyrrolidinone (NMP), and pyridine. The polymers had high glass transition temperatures (Tg) in the 291-329℃ range.     

SYNTHESIS AND CHARACTERIZATION OF FLUORINATED POLYAMIDES DERIVED FROM UNSYMMETRICAL DIAMINES CONTAINING THE PHTHALAZINONE MOIETY

A novel unsymmetrical fluorinated diamine monomer with kink non-coplanar heterocyclic structures, 1,2-dihydro- 2-（4-amino-2-trifluoromethyophenyo）-4-[4-（4-amino-2-trifluoromethyophenoxy）phenyo]（2H）phthaoazin-1-oneo was prepared through the nucleophilic substitution reaction of 1-trifluromethyl-2-chloro-5-nitrobenzene with 1,2-dihydro-4-（4- hydroxyphenyl）（2H）phthalazin-l-one in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd-C. A series of new fluorinated polyarnides were synthesized by the phosphorylation polyamidation of the fluorinated diamine with various dicarboxylic acids. The prepared polymers were obtained in quantitative yields with moderately and high inherent viscosities （0.47-0.87 dL/g）. They were all amorphous and readily soluble in various polar aprotic solvents such as N-methyl-2-pyrrolidone （NMP）, N,N-dimethylformamide （DMF）, N,N-dimethylacctamide （DMAc）, pyridine （Py） and m-cresol at room temperature. These fluorinated polyamides have excellent thermal properties. The glass transition temperatures were all above 300℃. The 5% and 10% weight loss temperatures were in the range of 437-466℃ and 482-525℃ in nitrogen atmosphere, respectively.     

Synthesis and characterization of new polyesters based on 2,5-bis[(4-chloro carboxyanilino) carbonyl] pyridine and aromatic diols

<正>Six new polyesters 7a-f were synthesized through the solution polycondensation reaction of diacid chloride 5 with six aromatic diols 6a-f in N,N-dimethyl acetamide(DMAc) as solvent in the presence of pyridine as base.The polycondensation reaction produced a series of novel polyester containing pyridyl moiety in the main chain in high yields with inherent viscosities between 0.35 and 0.54 dL/g.The resulted polymers were fully characterized by means of FT-IR spectroscopy,elemental analyses,inherent viscosity and solubility tests.Thermal properties of these polymers were investigated by using thermal gravimetric analysis(TGA) and differentional thermal gravimetric(DTG).The glass-transition temperatures of these polyesters were recorded between 130 and 170℃by differential scanning calorimetry(DSC) and the 10%weight loss temperatures were ranging from 390 to 450℃under nitrogen.     

Synthesis of Methyl—substituted Phthalazinone—based Aromatic Poly（amide imide）s

A series of novel aromatic poly (amide imide)s containing phthalazinone moietics were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with our diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36-0.65 dL/g. These polymers had high glass transition temperatures above 300℃ and they lost 10% weight between 426-475℃ in N2. The structure of diamine 1 and the polymers was confirmed by IR,^1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP,m-cresol etc. and easily cast into tough,flexible films. The X-ray indicated that they are all amorphous.     

Eco-friendly fast synthesis and thermal degradation of optically active polyamides under microwave accelerating conditions

<正>An optically active bulky aromatic diacid chiral monomer,(2S)-4-[(4-methyl-2-phthalimidylpentanoyl-amino) benzoylamino]isophthalic acid(1),containing a rigid phthalimide and flexible L-leucine pendent group was synthesized in five steps.A fast and clean method for direct polyamidation reaction of monomer 1 with various aromatic diamines under microwave irradiation and conventional heating was performed.The polymerization reactions provided optically active polyamides with high yields and inherent viscosities in the range of 0.36-0.74 dL/g.Their thermal properties were evaluated by thermogravimetric analysis(TGA) and differential scanning calorimetry.TGA thermograms show that the polymers are thermally stable,10%weight loss temperatures are in excess of 385℃,and char yields at 800℃are higher than 56%.The data obtained from TGA were used to study the kinetics of thermal decomposition of the resulting polymers. The interpretation of kinetic parameters(E,ΔH,ΔS andΔG) of thermal decomposition stages was evaluated using Coats and Redfern equation.     

Wholly aromatic chiral polyamides bearing pendant phthalimido and L-isoleucine moities

<正>A potential biodegradable and optically active bulky chiral aromatic amide-imidic diacid monomer,(2S,3S)-5-(3- methyl-2-phthalimidylpentanoylarnino)isophthalic acid(7),containing a rigid phthalimide and flexible L-isoleucine pendant group was synthesized in three steps.New aromatic polyamides including pendant phthalimido groups and flexible side spacers have been synthesized by direct polycondensation reaction of equimolar amounts of different aromatic diamines with an optically active diacid 7,using N-methyl-2-pyrrolidone(NMP) as a solvent and triphenyl phosphite/CaCl_2/pyridine as a condensing agent.These polyamides were characterized by FTIR,~1H-NMR spectroscopy,specific rotation, thermogravimetric and elemental analysis.The resulting polymers have inherent viscosities in the range of 0.21-0.45 dL/g. Amino acid existence in this backbone results in optically active polymers.Due to introduction of bulky and flexible groups in these polyamides,they show improved solubility in polar aprotic solvents such as NMP and dimethylacetamide and also good thermal stability(10%weight loss temperatures in excess of 330℃,and char yields at 600℃in nitrogen higher than 62%).     

Synthesis and characterization of polyamides derived from (4-(4-(2, 6-diphenylpyridin-4yl)phenoxy)phenyl)-3, 5-diaminobezamide

New types of polyamides containing pendent triaryl pyridine groups were successfully synthesized by direct polycondensation of a symmetry diamine,（4-（4-（2,6-diphenylpyridin-4yl）phenoxy）phenyl）-3,5-diaminobezamide（DPDAB）, and various aromatic and aliphatic dicarboxylic diacids in NMP using triphenyl phosphate（TPP） and pyridine as catalyst. The diamine and all the prepared polyamides were fully characterized by using FT-IR,¹H-NMR,UV-Vis spectroscopy, fluorimetry and elemental analysis.The inherent viscosity of polyamides ranged from 0.45 dL/g to 0.68 dL/g.All the polymers exhibited solubility in common polar aprotic solvents such as NMP,DMAc,DMF,DMSO,pyridine,HMPA,and even in less polar solvents such as THF and m-cresol at room temperature.Thermal properties of polyamides were evaluated by means of DSC,DMTA and TGA.These polymers showed glass transition temperatures（T_g） in the range of 138-210℃. Their initial decomposition temperature（T_i） varied from 265℃to 310℃under N₂.The dilute solution（0.2 g/dL） of polyamides in DMF exhibited fluorescence emission withλ_max in the range of 470-550 nm.     

Synthesis and characterization of organosoluble polyamides from quinoxaline based diamine

<正>Aromatic/aliphatic polyamides were synthesized from a diamine monomer,2,3-bis-p-aminophenylquinoxaline (Ⅳ),based on quinoxaline and various dicarboxylic acids of aliphatic,aromatic and heterocyclic.The diamine and polyamides were characterized by elemental analysis,FTIR and ~1H-NMR.The solubility of the polyamides was affected by the quinoxaline and heterocyclic groups in the polymer chain.They were all soluble in common organic solvents such as dimethylsulfoxide(DMSO),N,N-dimethylformamide(DMF) and N-methylpyrolidone(NMP).The polyamides showed inherent viscosity in the range of 0.25-0.3 dL/g in DMSO at 25℃and good thermal stability with the char yields in the range of 65%-82%at 600℃in nitrogen.     

HETEROAROMATIC POLYMERS - HIGH TEMPERATURE POLYPYRROLONES DERIVED FROM 2,6-BIS(3′,4′-DIAMINOPHENYL)-4-BIPHENYLPYRIDINE AND VARIOUS AROMATIC DIANHYDRIDES

A new type of aromatic tetraamine containing biphenyl moiety in the side chain was synthesized via a modified Chichibabin's reaction. 3-Nitro-4-acetamidoacetophenone was reacted with 4-phenyl benzaldehyde in the presence of ammonium acetate to obtain 2,6-bis(3′,4′-diaminophenyl)-4-biphenyl pyridine (DPPA). A series of polypyrrolones (PPys)were prepared using tetraamine and various aromatic dianhydrides via a two-step cyclization procedure. All the PPys show excellent high temperature stabilities with the initial decomposition temperatures of 530-549℃ and residual weight ratio of 49%-80% at 750℃ in nitrogen. The polymers exhibit no apparent glass transition temperatures (Tgs) except PPy-1(Tg = 327℃), which is derived from tetraamine DPPA and 2,2-bis[4-(3′,4′-dicarboxyphenoxy)-phenyl]propane dianhydride (BPADA). In addition, the polymers have acceptable mechanical properties with the tensile strength of 65-94 MPa. The PPy films show excellent hydrolysis-resistance in alkaline aqueous medium and could maintain most of the properties even after boiling in 10% aqueous sodium hydroxide solution for a week.     

含联苯二氮杂萘酮结构聚芳酰胺的合成与表征

用类双酚单体4[4(4羟基苯基)苯基]2H二氮杂萘1酮(DHPZpP)与对氯苯腈进行亲核取代反应后碱性水解合成一种扭曲、非共平面杂环芳香二酸,4{4[4(4羧基苯氧基)苯基]苯基}2(4羧基苯基)二氮杂萘1酮(2).由二酸2和各种芳香二胺进行膦酰化缩聚反应制得了一系列的含联苯二氮杂萘酮结构聚芳酰胺,其特性粘数在0.42～0.72dLg之间.该类聚芳酰胺均可溶解于NMP、DMAc和DMSO等极性有机溶剂中,并且可用DMAc为溶剂制成具有良好机械性能的透明聚合物薄膜,聚合物薄膜的拉伸强度为80～89MPa.该类聚芳酰胺具有优异的耐热性,玻璃化转变温度Tg在298～328℃之间,10%的热失重温度(Td)在470℃以上.     

含二氮杂萘酮结构聚芳醚腈酮酮的合成及表征

以5种含杂萘联苯结构的单体与2,6-二氯苯腈、1,4-二(4-氟代苯甲酰基)苯为原料进行亲核缩聚反应,制备了一系列含有杂萘联苯结构的新型聚芳醚腈酮酮树脂.其特性粘度在0.51~1.15 dL.g-1之间.采用FT-IR,示差扫描量热仪(DSC),热重分析仪(TGA)对聚合物的结构和性能进行了表征,结果表明,聚芳醚腈酮酮的玻璃化转变温度(Tg)在252~294℃之间,10%热失重温度(Td)在457℃以上,具有优异的耐热性能.聚芳醚腈酮酮均可溶解于N-甲基吡咯烷酮(NMP)、N,N-二甲基乙酰胺(DMAc)、和氯仿等极性非质子型有机溶剂中,聚合物均可溶解于NMP后浇铸得到透明的、韧性好的薄膜.     

Aromatic polyamides derived from unsymmetrical diamines containing the phthalazinone moiety

Two unsymmetrical and kink non‐coplanar heterocyclic diamines, 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐[4‐(4‐aminophenoxy)phenyl](2H)phthalazin‐1‐one and 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐[4‐(4‐aminophenoxy)‐3,5‐dimethylphenyl](2H) phthalazin‐1‐one, were successfully synthesized by readily available heterocyclic bisphenol‐like monomers through two steps in high yields. A series of novel poly(arylene ether amides)s containing the phthalazinone moiety with inherent viscosities of 1.16–1.67 dL/g were prepared by the direct polymerization of novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in a variety of solvents such as N,N‐dimethylformamide, N,N‐dimethylacctamide, dimethyl sulfoxide, N‐methyl‐2‐pyrrolidone, and even in pyridine, chloroform and m‐cresol. The glass‐transition temperatures were in the range of 291–329 °C, and the temperatures for 5% weight loss in nitrogen were above 490 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3489–3496, 2002     

新型氯取代含杂萘联苯结构可溶性聚芳酰胺的合成、表征和性能

以类双酚单体4-(3-氯-4-羟基-苯基)-2H-二氮杂萘-1-酮(DHPZ-OC)和对氯苯腈为原料进行亲核取代反应合成二腈化合物4-[3-氯-4-(4-氰基苯氧基)苯基]-2-(4-氰基苯基)二氮杂萘-1-酮(),然后在碱性(KOH)条件下进行水解制得了一种新型的含氯取代杂萘联苯结构的芳香二酸,4-[3-氯-4-(4-羧基苯氧基)苯基]-2-(4-羧基苯基)二氮杂萘-1-酮().用新二酸与各种芳香二胺进行直接缩合聚合制得了一系列新型氯取代含杂萘联苯结构的聚芳酰胺,特性粘度可达1.23dL/g.用FTIR和¹HNMR研究了新型二酸单体及聚合物的结构.该类聚芳酰胺均可溶解于NMP,DMAc和DMSO等极性有机溶剂中,并且可浇铸成透明韧性膜,其玻璃化转变温度在291～332℃之间,10%的热失重温度在460℃以上.     

基于2,6-二甲基萘的杂环聚芳醚酮的合成

由1,5-二(4'-氟苯甲酰基)-2,6-二甲基萘(1)和类双酚单体(2a～2d)通过N—C偶联聚合反应合成了一系列基于2,6-二甲基萘的新型杂环聚芳醚酮(3a～3d).采用FTIR、1H-NMR、DSC、TGA、GPC等手段对聚合物进行结构表征和性能测试,并研究了其溶解性及特性黏数.结果表明,聚合物在室温下易溶于氯仿、DMAc、NMP、吡啶和间甲酚等非质子极性有机溶剂,其氯仿溶液能形成无色透明、韧性较好的膜,特性黏数(ηinh)在0.76～1.40 dL/g范围内.聚合物3b～3d的数均分子量(Mn)和分散指数(PDI)分别在78000～104000和1.66～2.21范围内.该类聚合物的玻璃化转变温度(Tg)均大于280℃,在氮气氛围和800℃时的残余量在53%～69%范围内.该类聚合物在氮气中5%和10%的热失重温度分别在423～440℃和434～467℃范围内.     

含4-苯基二氮杂萘酮结构共聚芳酯的合成及性能

以4-[4-(4羧基苯氧基)苯基]-2-(4-羧基苯基)二氮杂萘-1-酮(DHPZ-DA)、4,4'-二羧基二苯醚(DAPE)和2,2'-二(4-羟基苯基)丙烷(PBA)为原料,采用溶液缩聚法,合成了一系列聚芳酯,其数均分子量在1.2×104～1.7×104之间.通过FTIR和1H-NMR对聚芳酯结构进行了表征.该系列...     

含芳基均三嗪环耐高温低聚酰亚胺的合成与性能

通过调控聚合单体的摩尔配比,合成了一系列新型的不同分子链长度的邻苯二甲腈封端含二氮杂萘酮联苯结构低聚酰亚胺,通过FTIR、1H-NMR、WAXD和元素分析对其结构进行表征.以4,4′-二氨基二苯砜为催化剂,低聚物经常压下固化交联后,得到含芳基均三嗪环结构的热固性聚酰亚胺.低聚物表现了良好的溶解性能,可溶于N-甲基-2-...     

Heat-resistant and soluble fluorinated poly(amide imide)s based on non-coplanar ortho-linked diimide-dicarboxylic acid

A series of novel fluorinated heat-resistant poly(amide imide)s (PAIS) based on non-coplanar diimide-diacid monomer (DIDA) were synthesized and characterized. The poly(amide imide)s were obtained in high yields and possessed inherent viscosities in the range of 0.47-0.91 dL g⁻¹. All of the polymers were amorphous in nature, showed outstanding solubility and could be readily soluble in common organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidinoned, dimethyl sulfoxide, N,N-dimethylformamide, pyridine and tetrahydrofuran. Glass transition temperatures were in the range of 221-263 °C, as determined by differential scanning calorimetry. Degradation temperatures for 10% weight loss occurred all above 520 °C and char yields was more than 50% at 700 °C in nitrogen atmosphere. Moreover, these PAIs possessed low refractive indexes (n = 1.58-1.59), birefringence (Δn = 0.008-0.013), and dielectric constants (? ≈ 2.5) due to the trifluoromethyl pendent groups and ortho-catenated aromatic rings that interrupt chain packing and increase free volume.