Fluorescence resonance energy transfer between acridine orange and rhodamine 6G and its analytical application for vitamin B12 with flow-injection laser-induced fluorescence detection

By coupling flow-injection with laser-induced fluorescence detection, a setup was developed and a novel method combining fluorescence resonance energy transfer (FRET) and flow-injection analysis (FIA) was proposed for the determination of vitamin B₁₂ (VB₁₂) based on its fluorescence quenching on the system of acridine orange (AO)/rhodamine 6G (R6G). The effective energy transfer could occur between AO and R6G in the dodecyl benzene sodium sulfonate (DBS) while 454 nm argon laser was used as the excitation source, and as a result, the fluorescence emission of R6G has been increased significantly. It was found that the fluorescence of the above system could be sharply diminished by VB₁₂. By using the mixed solution AO-R6G-DBS and the same solution containing VB₁₂ as the carrier and sample, respectively, a series of negative peaks which could be applied for the quantification of VB₁₂ were obtained. The detection limit for VB₁₂ was 1.65 × 10⁻⁶ mol/L. The linear range for determining VB₁₂ was 4 × 10⁻⁴ to 2 × 10⁻⁶ mol/L (correlation coefficient, r = 0.9923). The method was applied to measure VB₁₂ injections with satisfactory results.     

Fluorescent Dye Incorporated Magnetic/Silica and Fluorescent Silica Nanoparticles Based Myoglobin Detection from Whole Blood Samples

The anti myoglobin conjugated iron oxide/ru(bpy)₃²⁺/silica, anti myoglobin conjugated rhodamine 6G/silica particles were prepared, and used for myoglobin detections. The anti myoglobin conjugated iron oxide/ru(bpy)₃²⁺/silica particles were mixed with myoglobin in the micro centrifuge tube. After 10 min, the magnetic separators were introduced to catch the myoglobin‐captured anti myoglobin/iron oxide/ru(bpy)₃²⁺/silica particles from the homogenous solutions. For sandwich assays, the anti myoglobin conjugated rhodamine 6G/silica particles were incubated. The concentration of myoglobin was quantified based on anti myoglobin conjugated rhodamine 6G/silica particles. The calibration curve of the myoglobin showed the linear range to be between 1 × 10^?12 and 1 × 10^?10 (M) (R² = 0.9944). The minimum detectable concentration was 17.6 pg/mL. The fluorescence method offered the best way to determine myoglobin with a total analysis time of less than 30 min.     

A simple and sensitive resonance scattering spectral method for determination of hydroxyl radical in Fenton system using rhodamine S and its application to screening the antioxidant

Based on resonance scattering (RS) effect of rhodamine dye association particles, a new resonance scattering method for the determination of hydroxyl free radical from Fenton reaction was developed. In HCl-NaAc buffer solution, the OH of Fenton reaction oxidized the excess I⁻ to I₃⁻. The I₃⁻ combined, respectively, with rhodamine B (RhB), butyl rhodamine B (b-RhB), rhodamine 6G (RhG) and rhodamine S (RhS) to form association particles that exhibit stronger resonance scattering effect at 420 nm and 610 nm. However, the RS peak at about 610 nm was interfered with its synchronous fluorescence peak at 580 nm for RhB, 580 nm for b-RhB, 560 nm for RhG and 560 nm for RhS, respectively. The concentration of H₂O₂ in the range of 0.648-21.6 μmol/L, 0.423-13.0 μmol/L, 0.216-13.0 μmol/L and 0.092-13.0 μmol/L was linear to its resonance scattering intensity at 420 nm. Its detection limit was 0.15 μmol/L, 0.10 μmol/L, 0.092 μmol/L and 0.044 μmol/L, H₂O₂, respectively. This RhS RS method was applied to selection of the antioxidant, with satisfactory results.     

A new and sensitive resonance-scattering method for determination of trace nitrite in water with rhodamine 6G

In the medium HCl–KI–rhodamine dye, NO₂^– reacts with excess I^– to form I₃^– and the I₃^– and rhodamine dye combine to form an association particle which gives three resonance-scattering (RS) peaks at 320 nm, 400 nm, and 595 nm. In systems containing rhodamine 6G (Rh6G), rhodamine B (RhB), rhodamine S (RhS), and butyl rhodamine B (BRhB) the resonance scattering intensity at 400 nm is proportional to nitrite concentrations in the range 2.3–276 ng mL^–1, 9.2–184 ng mL^–1, 9.2–184 ng mL^–1, and 9.2–92 ng mL^–1, respectively. Because of the high sensitivity, wide linear range, and good stability of the Rh6G system, it has been used for determination of nitrite in water samples, with satisfactory results. The spectral results have been used to verify that the formation of (Rh6G·I₃)_n association particles and their interface with the system are main factors that cause the RS enhancement.     

Influence of lithium iodide on association of rhodamine 6G molecules in mixtures of isopropanol with CCl4

The spectral-luminescent properties of rhodamine 6G on addition of lithium iodide to the solutions were studied in mixtures of polar (isopropanol) and nonpolar (carbon tetrachloride) solvents. It was found that when LiI is added, the complex associates of the dye molecules formed in solutions containing more than 90 vol. % of CCl₄ dissociate into rhodamine 6G monomers. The enthalpy of association of rhodamine depends on the concentration of the salt in the system. The volume and the geometry of the complexes have been evaluated from the data of the polarization characteristics of the fluorescence of the associates.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 23, No. 3, pp. 368–372, May–June, 1987.The authors wish to express their gratitudes to Associate Professor B. M. Uzhinov for his participation in the discussion of the results.     

A new sensitive and selective fluorescence method for determination of chlorine dioxide in water using rhodamine S

A new simple, selective and sensitive method for the determination of trace chlorine dioxide in water has been developed, based on the oxidation by chlorine dioxide to reduction the fluorescence of rhodamine dyes in ammonia-ammonium chloride buffer solution. Four rhodamine dyes systems such as rhodamine S, rhodamine G, rhodamine B and butyl-rhodamine B were tested. The rhodamine S system is the best, with a linear range of 0.0060-0.450 μg mL⁻¹ and a detection limit of 0.0030 μg mL⁻¹ ClO₂. It was applied to the determination of chlorine dioxide in synthetic samples and real samples, with satisfactory results. This method has good selectivity, especially, other chlorine species such as chlorine, hypochlorite, chlorite and chlorate do not interfere the determination. The mechanism of fluorescence reduction was also considered.     

A new resonance scattering spectral method for the determination of trace amounts of iodate with rhodamine 6G

Under the conditions of 0.04 mol L⁻¹ HCl-8.0 × 10⁻⁴ mol L⁻¹ KI, there is a fluorescence peak at 540 nm and a synchronous fluorescence peak at 540 nm for rhodamine 6G (RhG). When there is IO₃⁻, it reacts with exceed I⁻ to form I₃⁻. And I₃⁻ and RhG combine into ion association particles. The particles exhibit three resonance scattering peaks at 320, 400 and 595 nm. And there is fluorescence quenching at 540 nm. Iodine concentration is proportional to the intensity of the resonance scattering intensity at 400 nm in the range of 1.0-20 × 10⁻⁷ mol L⁻¹. And a new resonance scattering spectral (RSS) method has been described for the determination of IO₃⁻ in salt samples. The spectral results have been verified that the formation of (RhG-I₃)_n association particles and solid-liquid interfaces are the main factor that cause the fluorescence quenching and resonance scattering effects.     

Dye aggregation and influence of pre-micelles on heterogeneous catalysis: A photophysical approach

Common cationic dyes used for laser and fluorescent probes present low solubility in water. In order to increase the dye concentration in aqueous solutions, anionic surfactant can be added. The strong interaction between anionic surfactant and cationic dye can affect drastically the dye absorption and fluorescence properties. Here we observed that the fluorescence of the species in aqueous solution is maximized at condition of complete micellization of surfactants at critical micelle concentration (CMC). In addition, combined measurements of absorption, emission and fluorescence lifetime provide fundamental information on the critical concentration of H-aggregates formation and monomer separation, induced by pre-micelles and homomicelles on different surfactant sodium dodecylsulphate (SDS) concentration. The experimental results show how to find precisely the critical concentration of H-aggregates by optical method in two different xanthene-derived molecules: rhodamine 6G and rhodamine B. The adequate transference of electron from excited dye to the conduction band of semiconductor (TiO₂) promotes the creation of reactive species that provides the degradation of dye with advantage of use of irradiation in the visible region and strong photobleaching with direct exposure to the visible light irradiation in a scale of time of 10 min.     

A novel and selective spectral method for the determination of trace chlorine in water basing on the resonance scattering effect of rhodamine B-I(3) association nanoparticles

In Na₂HPO₄-citric acid buffer solution, Cl₂ can oxidize I⁻ to form I₂ and then it reacts with excess I⁻ to form I₃⁻. The I₃⁻ combines respectively with rhodamine dyes, including rhodamine B (RhB), butyl rhodamine B (b-RhB), rhodamine 6G (RhG) and rhodamine S (RhS), to form association particles which give stronger resonance scattering (RS) effect at 400 nm. The RS intensity of the RhB, b-RhB, RhG and RhS systems is proportional to chlorine concentrations in the range of 0.008-1.74, 0.019-1.33, 0.021-2.11 and 0.019-2.04 μg/mL Cl₂, respectively. The detection limits of the systems were 0.0020, 0.0048, 0.0063 and 0.0017 μg/mL, respectively. In them, the RhB system has good stability and high sensitivity, and has been applied to the analysis of chlorine in drinking water, with satisfactory results which is in agreement with that of the methyl orange (MO) spectrophotometry.     

Synthesis of Fe3O4\SiO2\Ag nanoparticles and its application in surface-enhanced Raman scattering

To obtain a recyclable surface-enhanced Raman scattering (SERS) material, we developed a composite of Fe₃O₄\SiO₂\Ag with core\shell\particles structure. The designed particles were synthesized via an ultrasonic route. The Raman scattering signal of Fe₃O₄ could be shielded by increasing the thickness of the SiO₂ layer to 60 nm. Dye rhodamine B (RB) was chosen as probe molecule to test the SERS effect of the synthesized Fe₃O₄\SiO₂\Ag particles. On the synthesized Fe₃O₄\SiO₂\Ag particles, the characteristic Raman bands of RB could be observed when the RB solution was diluted to 5 ppm (1×10⁻⁵ M). Furthermore, the synthesized particles could keep their efficiency till four cycles.     

Gas-Phase Fluorescence Excitation and Emission Spectroscopy of Three Xanthene Dyes (Rhodamine 575, Rhodamine 590 and Rhodamine 6G) in a Quadrupole Ion Trap Mass Spectrometer

The gas-phase fluorescence excitation, emission and photodissociation characteristics of three xanthene dyes (rhodamine 575, rhodamine 590, and rhodamine 6G) have been investigated in a quadrupole ion trap mass spectrometer. Measured gas-phase excitation and dispersed emission spectra are compared with solution-phase spectra and computations. The excitation and emission maxima for all three protonated dyes lie at higher energy in the gas phase than in solution. The measured Stokes shifts are significantly smaller for the isolated gaseous ions than the solvated ions. Laser power-dependence measurements indicate that absorption of multiple photons is required for photodissociation. Redshifts and broadening of the dispersed fluorescence spectra at high excitation laser power provide evidence of gradual heating of the ion population, pointing to a mechanism of sequential multiple-photon activation through absorption/emission cycling. The relative brightness in the gas phase follows the order R575(1.00) < R590(1.15) < R6G(1.29). Fluorescence emission from several mass-selected product ions has been measured.     

Donor fluorescence decay in the rhodamine 6G-malachite green system in the presence of energy migration

The decay of rhodamine 6G fluorescence in the presence of malachite green was investigated. For the systems subject to investigations the electronic excitation energy migration among rhodamine 6G molecules plays an essential role in the process of energy transfer to malachite green. The epxerimental results were compared with a theoretical formula for the fluorescence decay function.     

罗丹明6G衍生物基偏酸性“关开型”pH荧光探针

以罗丹明6G和水合肼为原料,先制备罗丹明6G酰肼,接着在乙醇中滴加少量冰醋酸做催化剂后与2,5-二甲氧基苯甲醛反应,合成了一种新型的pH荧光分子探针(RGSBD),进行了结构表征及荧光性能研究。结果表明,原本在氢离子浓度较低,即体系pH较高时(pH≥4.0),探针RGSBD内酰胺螺环闭环导致不显示荧光并且无色,然而在氢离子浓度较大即体系pH较低时(pH<4.0)时,其内酰胺螺环闭环产生了明显的颜色变化,发出强烈的荧光。pH 1.9时,探针的荧光强度达到最大,最大荧光峰发生显著的红移。进一步研究表明,探针RGSBD的荧光峰强度差值与pH在1.9~3.2范围内呈良好的线性关系,探针RGSBD识别H^+的选择性高,稳定性与可逆性强,可发展用作生物体内pH荧光传感材料。     

Simultaneous Determination of Fluorescein, Rhodamine 6G and Rhodamine B in Turbid Solution by Polarization Variable-Angle Synchronous Fluorescence Spectrometry

Fluorescencespectron1etry,inpractice,ishardto'beappliedtomulti-componentanalysisduetothespectraloverlapofcomplexn1ixtures.MoredVer,enVironmentalsan1plesandbiologicalsamplesareoftenturbidiand'the'directdetern1intitjodsofsuchsampleswouldsufferfromthesignificantinterferenceofscatteringlight.Synchronousfluorescencespectrol11etryisbecomingpopularconcerningitssimpIicity,selectivityandsensitivityindealingwithcomplexsamples.Onedrawbacktoconventionalconstant-wavelengthsynchronousfluorescencespectromet…     

Determination of cerium in rare earth ores by fluorescence quenching of rhodamine 6G

A fluorescence quenching method has been developed to determine cerium with rhodamine 6G. The method is based on the oxidation of rhodamine 6G by cerium(IV) in sulfuric acid solution. The linear calibration range is 4.0 × 10^–7 -1.6 × 10^–6mol/L. The detection limit is 1.0 × 10^–7 mol/L. The relative standard deviation was 1.0% (n = 5). The method has been used to determine cerium in rare earth ores, with satisfactory results. The method offers the advantages of simplisity, sensitivity and selectivity.     

Using sequential injection analysis for fast determination of phosphate in coastal waters

A sequential injection analysis system (SIA) is described which is suited for the fast determination of filterable molybdate reactive phosphate (FRP, 0.2 μm) in coastal waters. It processes up to 270 samples per hour with a detection limit (3σ) of 0.05 μM and is used for surface mapping of phosphate in areas with steep concentration gradients like the Wadden Sea. The determination is based on the reaction of phosphate with acidic molybdate to phosphomolybdate, which builds non-fluorescent ion pairs with rhodamine 6G. The remaining rhodamine fluorescence is detected at 550 nm with an excitation at 470 nm. Syringe pump, valve and detector were controlled by a self made python programme, which was optimised for high speed SIA measurements in monitoring applications.     

Spectrophotometric determination of traces of nitrite with rhodamine 6 G

A simple and highly selective spectrophotometric method is described for the determination of nitrite. The method is based on the measurement of decrease in absorbance at 525 nm of rhodamine 6 G in sulphuric acid medium. The decrease in absorbance is instantaneous on addition of nitrite and remains stable for 2 h. Linear calibration graph passing through the origin was obtained in the range 0.01–0.6 g/ml nitrite. The method is free from interference of Cu²⁺, Fe³⁺ and SO ₃ ^2– which normally interfere in other procedures. The method was applied successfully to the determination of nitrite in well and sea water samples and in KNO₃, NaNO₃, table salt, sugar and milk powder samples.     

Spectroscopic studies of rhodamine 6G dispersed in polymethylcyanoacrylate

We report here electronic absorption, fluorescence and resonance Raman studies of rhodamine 6G laser dye dispersed in the polymethylcyanoacrylate matrix. In the electronic absorption and fluorescence spectra of dispersed rhodamine 6G, band maxima are red shifted compared to solution. Raman spectra show some new bands. These spectral changes arise due to matrix effect and interaction between rhodamine 6G and the host material involving amine group of rhodamine.     

Bi2WO6 photocatalytic films fabricated by layer-by-layer technique from Bi2WO6 nanoplates and its spectral selectivity

Bi₂WO₆ multilayer films have been fabricated successfully by a layer-by-layer (LbL) technique from Bi₂WO₆ nanoplates, which show higher visible-light photoactivity (λ>420 nm) than that of Bi₂WO₆ nanoplate powders and P25 TiO₂ films. The films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and UV-visible absorption spectroscopy. Photocatalytic activities of the films were evaluated by the rhodamine B (RhB) decomposition under UV and visible-light irradiation. Thickness and photoactivity of the film can be modified easily by changing the deposition cycles. Bi₂WO₆ films have the spectral selectivity of the photocatalytic degradation of RhB. Under the wavelength greater than 300 nm, the RhB molecules tend to be transformed to rhodamine over Bi₂WO₆ films selectively. However, in the case of shorter wavelength (λ=254 nm) light irradiation, the RhB molecules can be photodegraded completely.     

Fabrication and photoelectrochemical properties of porous ZnWO4 film

Porous ZnWO₄ films have been fabricated on Indium-tin oxide (ITO) glass and its photoelectrochemical properties and high photocatalytic activities towards degradation of rhodamine B (RhB) has been investigated. Using amorphous heteronuclear complex as precursor and with the addition of polyethylene glycol (PEG, molecular weight=400), the porous ZnWO₄ films have been achieved at the temperature of 500 °C via dip-coating method. It is composed of approximately 70 nm-sized particles and exhibits substantial porosity. The textures and porosity of ZnWO₄ films are dependent on preparation factors, such as the ratio of precursor/PEG and the annealing conditions. The formation mechanism of porous ZnWO₄ films was proposed. The porous ZnWO₄ films exhibited high photocatalytic activities towards degrading RhB. The top of valence band and the bottom of the conduction band was estimated to be −0.56 and 3.45 eV (vs. saturated calomel electrode (SCE)), respectively.