首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 0 毫秒
1.
The charge transfer and deuterium ion transfer reactions between D(2)O(+) and C(2)H(4) have been studied using the crossed beam technique at relative collision energies below one electron volt and by density functional theory (DFT) calculations. Both direct and rearrangement charge transfer processes are observed, forming C(2)H(4) (+) and C(2)H(3)D(+), respectively. Independent of collision energy, deuterium ion transfer accounts for approximately 20% of the reactive collisions. Between 22 and 36 % of charge transfer collisions occur with rearrangement. In both charge transfer processes, comparison of the internal energy distributions of products with the photoelectron spectrum of C(2)H(4) shows that Franck-Condon factors determine energy disposal in these channels. DFT calculations provide evidence for transient intermediates that undergo H/D migration with rearrangement, but with minimal modification of the product energy distributions determined by long range electron transfer. The cross section for charge transfer with rearrangement is approximately 10(3) larger than predicted from the Rice-Ramsperger-Kassel-Marcus isomerization rate in transient complexes, suggesting a nonstatistical mechanism for H/D exchange. DFT calculations suggest that reactive trajectories for deuterium ion transfer follow a pathway in which a deuterium atom from D(2)O(+) approaches the pi-cloud of ethylene along the perpendicular bisector of the C-C bond. The product kinetic energy distributions exhibit structure consistent with vibrational motion of the D-atom in the bridged C(2)H(4)D(+) product perpendicular to the C-C bond. The reaction quantitatively transforms the reaction exothermicity into internal excitation of the products, consistent with mixed energy release in which the deuterium ion is transferred in a configuration in which both the breaking and the forming bonds are extended.  相似文献   

2.
The complex doublet potential energy surface for the ion-molecule reaction of HCN(+) with C(2)H(4) is investigated at the B3LYP/6-311G(d,p) and CCSD(T)/6-311++G(3df,2pd) (single-point) levels. The initial association between HCN(+) and C(2)H(4) forms three energy-rich addition intermediates, 1 (HCNCH(2)CH(2)(+)), 2 (HC-cNCH(2)CH(2)(+)), and 3 (N-cCHCH(2)CH(2)(+)), which are predicted to undergo subsequent isomerization and decomposition steps. A total of nine kinds of dissociation products, including P(1) (HCN + C(2)H(4)(+)), P(2) (HCNCHCH(2)(+) + H), P(3) (NCCH(2) + CH(3)(+)), P(4) (CN + C(2)H(5)(+)), P(5) (NCCHCH(2)(+) + H(2)), P(6) (HNCCHCH(2)(+) + H), P(7) (c-CHCCH(2)N(+) + H(2)), P(8) (c-NHCCH(2)C(+) + H(2)), and P(9) (HNCCCH(+) + H(2) + H), are obtained. Among the nine products, P(1) is the most abundant product. P(2) is the second feasible product but is much less competitive than P(1). P(3), P(4), P(5), and P(6) may have the lowest yields observed. Other products, P(7), P(8), and P(9), may become feasible at high temperature. Because the intermediates and transition states involved in the most favorable pathway all lie below the reactant, the HCN(+) + C(2)H(4) reaction is expected to be rapid, which is confirmed by experiment. The present calculation results may provide a useful guide for understanding the mechanism of HCN(+) toward other unsaturated hydrocarbons.  相似文献   

3.
Bromodifluoroacetyl fluoride, CF2BrC(O)F, was prepared through the gas-phase reaction of bromotrifluoroethene, CF2CFBr, with molecular oxygen initiated either by NO2 or CF3OF. The compound was experimentally studied by FTIR spectroscopy of the gas phase and also isolated in Ar and N2 matrices at low temperature. The energy differences between the possible conformers were theoretically studied, as well as the vibrational spectra of the conformers.  相似文献   

4.
We investigated the rate constants and reaction mechanism of the gas phase reaction between the ethynyl radical and nitrous oxide (C(2)H + N(2)O) using both experimental methods and electronic structure calculations. A pulsed-laser photolysis/chemiluminescence technique was used to determine the absolute rate coefficient over the temperature range 570 K to 836 K. In this experimental temperature range, the measured temperature dependence of the overall rate constants can be expressed as: k(T) (C(2)H + N(2)O) = 2.93 × 10(-11) exp((-4000 ± 1100) K/T) cm(3) s(-1) (95% statistical confidence). Portions of the C(2)H + N(2)O potential energy surface (PES), containing low-energy pathways, were constructed using the composite G3B3 method. A multi-step reaction route leading to the products HCCO + N(2) is clearly preferred. The high selectivity between product channels favouring N(2) formation occurs very early. The pathway corresponds to the addition of the terminal C atom of C(2)H to the terminal N atom of N(2)O. Refined calculations using the coupled-cluster theory whose electronic energies were extrapolated to the complete basis set limit CCSD(T)/CBS led to an energy barrier of 6.0 kcal mol(-1) for the entrance channel. The overall rate constant was also determined by application of transition-state theory and Rice-Ramsperger-Kassel-Marcus (RRKM) statistical analyses to the PES. The computed rate constants have similar temperature dependence to the experimental values, though were somewhat lower.  相似文献   

5.
Quantum chemical calculations were carried out to study the reaction of Al atom in the ground electronic state with H(2)O molecule. Examination of the potential energy surface revealed that the Al + H(2)O → AlO + H(2) reaction must be treated as a complex process involving two steps: Al + H(2)O → AlOH + H and AlOH + H → AlO + H(2). Activation barriers for these elementary reaction channels were calculated at B3LYP/6-311+G(3df,2p), CBS-QB3, and G3 levels of theory, and appropriate rate constants were estimated by using a canonical variational theory. Theoretical analysis exhibited that the rate constant for the Al + H(2)O → products reaction measured by McClean et al. must be associated with the Al + H(2)O → AlOH + H reaction path only. The process of direct HAlOH formation was found to be negligible at a pressure smaller than 100 atm.  相似文献   

6.
The kinetics and the mechanism of the reaction CH(3)C(O)O(2)+ HO(2) were reinvestigated at room temperature using two complementary approaches: one experimental, using flash photolysis/UV absorption technique and one theoretical, with quantum chemistry calculations performed using the density functional theory (DFT) method with the three-parameter hybrid functional B3LYP associated with the 6-31G(d,p) basis set. According to a recent paper reported by Hasson et al., [J. Phys. Chem., 2004, 108, 5979-5989] this reaction may proceed by three different channels: CH(3)C(O)O(2)+ HO(2)--> CH(3)C(O)OOH + O(2) (1a); CH(3)C(O)O(2)+ HO(2)--> CH(3)C(O)OH + O(3) (1b); CH(3)C(O)O(2)+ HO(2)--> CH(3)C(O)O + OH + O(2) (1c). In experiments, CH(3)C(O)O(2) and HO(2) radicals were generated using Cl-initiated oxidation of acetaldehyde and methanol, respectively, in the presence of oxygen. The addition of amounts of benzene in the system, forming hydroxycyclohexadienyl radicals in the presence of OH, allowed us to answer that channel (1c) is <10%. The rate constant k(1) of reaction (1) has been finally measured at (1.50 +/- 0.08) x 10(-11) cm(3) molecule(-1) s(-1) at 298 K, after having considered the combination of all the possible values for the branching ratios k(1a)/k(1,)k(1b)/k(1,)k(1c)/k(1) and has been compared to previous measurements. The branching ratio k(1b)/k(1), determined by measuring ozone in situ, was found to be equal to (20 +/- 1)%, a value consistent with the previous values reported in the literature. DFT calculations show that channel (1c) is also of minor importance: it was deduced unambiguously that the formation of CH(3)C(O)OOH + O(2) (X (3)Sigma(-)(g)) is the dominant product channel, followed by the second channel (1b) leading to CH(3)C(O)OH and singlet O(3) and, much less importantly, channel (1c) which corresponds to OH formation. These conclusions give a reliable explanation of the experimental observations of this work. In conclusion, the present study demonstrates that the CH(3)C(O)O(2)+ HO(2) is still predominantly a radical chain termination reaction in the tropospheric ozone chain formation processes.  相似文献   

7.
Reduction of an oxide in hydrogen is a method frequently employed in the preparation of active catalysts and electronic devices. Synchrotron-based time-resolved X-ray diffraction (XRD), X-ray absorption fine structure (NEXAFS/EXAFS), photoemission, and first-principles density-functional (DF) slab calculations were used to study the reaction of H(2) with nickel oxide. In experiments with a NiO(100) crystal and NiO powders, oxide reduction is observed at atmospheric pressures and elevated temperatures (250-350 degrees C), but only after an induction period. The results of in situ time-resolved XRD and NEXAFS/EXAFS show a direct NiO-->Ni transformation without accumulation of any intermediate phase. During the induction period, surface defect sites are created that provide a high efficiency for the dissociation of H(2). A perfect NiO(100) surface, the most common face of nickel oxide, exhibits a negligible reactivity toward H(2). The presence of O vacancies leads to an increase in the adsorption energy of H(2) and substantially lowers the energy barrier associated with the cleavage of the H-H bond. At the same time, adsorbed hydrogen can induce the migration of O vacancies from the bulk to the surface of the oxide. A correlation is observed between the concentration of vacancies in the NiO lattice and the rate of oxide reduction. These results illustrate the complex role played by O vacancies in the mechanism for reduction of an oxide. The kinetic models frequently used to explain the existence of an induction time during the reduction process can be important, but a more relevant aspect is the initial production of active sites for the rapid dissociation of H(2).  相似文献   

8.
Electronic structure calculations at the CASSCF and UB3LYP levels of theory with the aug-cc-pVDZ basis set were used to characterize structures, vibrational frequencies, and energies for stationary points on the ground state triplet and singlet O(2)+C(2)H(4) potential energy surfaces (PESs). Spin-orbit couplings between the PESs were calculated using state averaged CASSCF wave functions. More accurate energies were obtained for the CASSCF structures with the MRMP2/aug-cc-pVDZ method. An important and necessary aspect of the calculations was the need to use different CASSCF active spaces for the different reaction paths on the investigated PESs. The CASSCF calculations focused on O(2)+C(2)H(4) addition to form the C(2)H(4)O(2) biradical on the triplet and singlet surfaces, and isomerization reaction paths ensuing from this biradical. The triplet and singlet C(2)H(4)O(2) biradicals are very similar in structure, primarily differing in their C-C-O-O dihedral angles. The MRMP2 values for the O(2)+C(2)H(4)→C(2)H(4)O(2) barrier to form the biradical are 33.8 and 6.1 kcal/mol, respectively, for the triplet and singlet surfaces. On the singlet surface, C(2)H(4)O(2) isomerizes to dioxetane and ethane-peroxide with MRMP2 barriers of 7.8 and 21.3 kcal/mol. A more exhaustive search of reaction paths was made for the singlet surface using the UB3LYP/aug-cc-pVDZ theory. The triplet and singlet surfaces cross between the structures for the O(2)+C(2)H(4) addition transition states and the biradical intermediates. Trapping in the triplet biradical intermediate, following (3)O(2)+C(2)H(4) addition, is expected to enhance triplet→singlet intersystem crossing.  相似文献   

9.
Rate coefficients of the reaction O(3P)+C2H5OH in the temperature range 782-1410 K were determined using a diaphragmless shock tube. O atoms were generated by photolysis of SO2 at 193 nm with an ArF excimer laser; their concentrations were monitored via atomic resonance absorption. Our data in the range 886-1410 K are new. Combined with previous measurements at low temperature, rate coefficients determined for the temperature range 297-1410 K are represented by the following equation: k(T)=(2.89+/-0.09)x10(-16)T1.62 exp[-(1210+/-90)/T] cm3 molecule(-1) s(-1); listed errors represent one standard deviation in fitting. Theoretical calculations at the CCSD(T)/6-311+G(3df, 2p)//B3LYP/6-311+G(3df) level predict potential energies of various reaction paths. Rate coefficients are predicted with the canonical variational transition state (CVT) theory with the small curvature tunneling correction (SCT) method. Reaction paths associated with trans and gauche conformations are both identified. Predicted total rate coefficients, 1.60 x 10(-22)T3.50 exp(16/T) cm3 molecule(-1) s(-1) for the range 300-3000 K, agree satisfactorily with experimental observations. The branching ratios of three accessible reaction channels forming CH3CHOH+OH (1a), CH2CH2OH+OH (1b), and CH3CH2O+OH (1c) are predicted to vary distinctively with temperature. Below 500 K, reaction 1a is the predominant path; the branching ratios of reactions 1b,c become approximately 40% and approximately 11%, respectively, at 2000 K.  相似文献   

10.
The feasibility of an electron transfer imino-Diels-Alder reaction between N-benzylideneaniline and arylalkenes in the presence of a pyrylium salt as a photosensitizer has been demonstrated by a combination of product studies, laser flash photolysis (LFP), and DFT theoretical calculations. A stepwise mechanism involving two intermediates and two transition states is proposed.  相似文献   

11.
The potential energy surfaces of the two lowest-lying triplet electronic surfaces 3A' and 3A' for the O(3P) + C2H2 reaction were theoretically reinvestigated, using various quantum chemical methods including CCSD(T), QCISD, CBS-QCI/APNO, CBS-QB3, G2M(CC,MP2), DFT-B3LYP and CASSCF. An efficient reaction pathway on the electronically excited 3A' surface resulting in H(2S) + HCCO(A2A') was newly identified and is predicted to play an important role at higher temperatures. The primary product distribution for the multistate multiwell reaction was then determined by RRKM statistical rate theory and weak-collision master equation analysis using the exact stochastic simulation method. Allowing for nonstatistical behavior of the internal rotation mode of the initial 3A' adducts, our computed primary-product distributions agree well with the available experimental results, i.e., ca. 80% H(2S) + HCCO(X2A' + A2A') and 20% CH2(X3B1) + CO(X1sigma+) independent of temperature and pressure over the wide 300-2000 K and 0-10 atm ranges. The thermal rate coefficient k(O + C2H2) at 200-2000 K was computed using multistate transition state theory: k(T) = 6.14 x 10(-15)T (1.28) exp(-1244 K/T) cm3 molecule(-1) s(-1); this expression, obtained after reducing the CBS-QCI/APNO ab initio entrance barriers by 0.5 kcal/mol, quasi-perfectly matches the experimental k(T) data over the entire 200-2000 K range, spanning 3 orders of magnitude.  相似文献   

12.
The kinetic properties of the carbon-fluorine radicals are little understood except those of CFn (n =1-3). In this article, a detailed mechanistic study was reported on the gas-phase reaction between the simplest pi-bonded C2F radical and water as the first attempt to understand the chemical reactivity of the C2F radical. Various reaction channels are considered. The most kinetically competitive channel is the quasi-direct hydrogen-abstraction route forming P5 HCCF + OH. At the CCSD(T)/6-311+G(2d,2p)//B3LYP/6-311G(d,p)+ZPVE, CCSD(T)/6-311+G(3df,2p)//QCISD/6-311G(d,p)+ZPVE and Gaussian-3//B3LYP/6-31G(d) levels, the overall H-abstraction barriers (4.5, 4.7, and 4.2 kcal/mol) for the C2F + H2O reaction are comparable to the corresponding values (5.5, 3.7, and 5.7 kcal/mol) for the analogous C2H + H2O reaction. This suggests that C2F is a reactive radical like the extensively studied C2H, in contrast to the situation of the CF and CF2 radicals that have much lower reactivity than the corresponding hydrocarbon species. Thus, the C2F radical is expected to play an important role in the combustion processes of the carbon-fluorine chemistry. Furthermore, addition of a second H2O can catalyze the reaction with the H-abstraction barrier significantly reduced to a marginally zero value (0.5 kcal/mol). This is also indicative of the potential relevance of the title reactions in the low-temperature atmospheric chemistry.  相似文献   

13.
A theoretical study was performed for the reaction of formyl cation and acetylene to give C3H+O in flames and C2H (nonclassical)+CO, both in flames and in interstellar clouds. The corresponding Potential Energy Surface (PES) was studied at the B3LYP/cc‐pVTZ level of theory, and single‐point calculations on the B3LYP geometries were carried out at the CCSD(T)/cc‐pVTZ level. Our results display a route to propynal evolving energetically under C2H (nonclassical)+CO and, consequently, accessible in interstellar clouds conditions. This route connects the most stable C3H3O+ isomer (C2‐protonated propadienone) with a species from which propynal may be produced in a dissociative electron recombination reaction. The reaction channel to produce the C3H+O evolves basically through two TSs and presents an endothermicity of 63.9 kcal/mol at 2000 K. According to our Gibbs energy profiles, the C2‐protonated propadienone is the most stable species at low–moderate temperatures and, consequently, could play a certain role in interstellar chemistry. On the contrary, in combustion chemistry conditions (2000 K) the C2H (nonclassical)+CO products are the most thermodynamically favored species. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 35–42, 2000  相似文献   

14.
Despite the importance of the Fluoromethyl radicals in combustion chemistry, very little experimental information on their reactions toward stable molecules is available in the literature. Motivated by recent laboratory characterization about the reaction kinetics of Chloromethyl radicals with NO2, we carried out a detailed potential energy survey on the CH2F + NO2 reaction at the B3LYP/6-311G(d,p) and MC-QCISD (single-point) levels as an attempt toward understanding the CH2F + NO2 reaction mechanism. It is shown that the CH2F radical can react with NO2 to barrierlessly generate adduct a (H2FCNO2), followed by isomerization to b1 (H2FCONO-trans) which can easily interconvert to b2 (H2FCONO-cis). Subsequently, Starting from b (b1, b2), the most feasible pathway is the C--F and N--O1 bonds cleavage along with N--F bond formation of b (b1, b2) leading to P1 (CH2O + FNO), or the direct N--O1 weak-bond fission of b (b1, b2) to give P2 (CH2FO + NO), or the 1,3-H-shift associated with N--O1 bond rupture of b1 to form P3 (CHFO + HNO), all of which may have comparable contribution to the reaction CH2F + NO2. Much less competitively, b2 either take the 1,4-H-shift and O1--N bond cleavage to form product P4 (CHFO + HON) or undergo a concerted H-shift to isomer c2 (HFCONOH), followed by dissociation to P4. Because the rate-determining transition state (TSab1) in the most competitive channels is only 0.3 kcal/mol higher than the reactants in energy, the CH2F + NO2 reaction is expected to be rapid, and may thus be expected to significantly contribute to elimination of nitrogen dioxide pollutants. The similarities and discrepancies among the CH2X + NO2 (X = H, F, and Cl) reactions are discussed in terms of the electronegativity of halogen atom. The present article may assist in future experimental identification of the product distributions for the title reaction, and may be helpful for understanding the halogenated methyl chemistry.  相似文献   

15.
The mechanisms of the reaction of NCCO with molecular oxygen are investigated at the G3MP2//B3LYP/6-311G(d,p) levels for the first time. The calculation results show that two mechanisms are involved, namely, O attack on α atom mechanism and O attack on β atom mechanism, with six products yielded. The most feasible channel is the addition of O2 to β atom in NCCO radical leading to the energy-rich intermediate IM1, NCC(O)OO, which can isomerize to a four-center-structure IM3, and then undergoes C–C and O–C bond fission to form P1(NCO + CO2) finally. The barriers are 27.3 and 25.4 kcal/mol, respectively. For other channels involved in the two mechanisms, with less stable initial adducts and higher barrier, they are less conceivable dynamically and thermochemically.  相似文献   

16.
High level ab initio calculations using complete active space self-consistent field and multi reference single and double excitation configuration interaction methods with cc-pVDZ (correlation consistent polarized valence double zeta) and cc-pVTZ (triple zeta) basis sets have been performed to elucidate the reaction mechanism of the ion-molecule reaction, C2H2(1Sigmag+) + O+(4S), for which collision experiment has been performed by Chiu et al. [J. Chem. Phys. 109, 5300 (1998)]. The minor low-energy process leading to the weak spin-forbidden product C2H2+ (2Piu) + O(1D) has been studied previously and will not be discussed here. The major pathways to form charge-transfer (CT) products, C2H2+ (2Piu) + O(3P) (CT1) and C2H2+ (4A2) + O(3P) (CT2), and the covalently bound intermediates are investigated. The approach of the oxygen atom cation to acetylene goes over an energy barrier TS1 of 29 kcal/mol (relative to the reactant) and adiabatically leads the CT2 product or a weakly bound intermediate Int1 between CT2 products. This transition state TS1 is caused by the avoided crossing between the reactant and CT2 electronic states. As the C-O distance becomes shorter beyond the above intermediate, the C1 reaction pathway is energetically more favorable than the Cs pathway and goes over the second transition state TS2 of a relative energy of 39 kcal/mol. Although this TS connects diabatically to the covalent intermediate Int2, there are many states that interact adiabatically with this diabatic state and these lead to the other charge-transfer product CT1 via either of several nonadiabatic transitions. These findings are consistent with the experiment, in which charge transfer and chemical reaction products are detected above 35 and 39 kcal/mol collision energies, respectively.  相似文献   

17.
The reactants, products, and transition states of the CH2O + NO2 reaction on the ground electronic potential energy surface have been searched at both B3LYP/6?311+G(d,p) and MPW1PW91/6?311+G(3df,2p) levels of theory. The forward and reverse barriers are further improved by a modified Gaussian‐2 method. The theoretical rate constants for the two most favorable reaction channels 1 and 2 producing CHO + cis‐HONO and CHO + HNO2, respectively, have been calculated over the temperature range from 200 to 3000 K using the conventional and variational transition‐state theory with quantum‐mechanical tunneling corrections. The former product channel was found to be dominant below 1500 K, above which the latter becomes competitive. The predicted total rate constants for these two product channels can be presented by kt (T) = 8.35 × 10?11 T6.68 exp(?4182/T) cm3/(mol s). The predicted values, which include the significant effect of small curvature tunneling corrections, are in quantitative agreement with the available experimental data throughout the temperature range studied (390–1650 K). © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 184–190, 2003  相似文献   

18.
A mixed quantum-classical method for calculating product energy partitioning based on a reaction path Hamiltonian is presented and applied to HF elimination from fluoroethane. The goal is to describe the effect of the potential energy release on the product energies using a simple model of quantized transverse vibrational modes coupled to a classical reaction path via the path curvature. Calculations of the minimum energy path were done at the B3LYP/6-311++G(2d,2p) and MP2/6-311++G** levels of theory, followed by energy-partitioning dynamics calculations. The results for the final HF vibrational state distribution were found to be in good qualitative agreement with both experimental studies and quasiclassical trajectory simulations.  相似文献   

19.
The effects of the reactant bending excitations in the F+CHD(3) reaction are investigated by crossed molecular beam experiments and quasiclassical trajectory (QCT) calculations using a high-quality ab initio potential energy surface. The collision energy (E(c)) dependence of the cross sections of the F+CHD(3)(v(b)=0,1) reactions for the correlated product pairs HF(v('))+CD(3)(v(2)=0,1) and DF(v('))+CHD(2)(v(4)=0,1) is obtained. Both experiment and theory show that the bending excitation activates the reaction at low E(c) and begins to inactivate at higher E(c). The experimental F+CHD(3)(v(b)=1) excitation functions display surprising peak features, especially for the HF(v(')=3)+CD(3)(v(2)=0,1) channels, indicating reactive resonances (quantum effects), which cannot be captured by quasiclassical calculations. The reactant state-specific QCT calculations predict that the v(5)(e) bending mode excitation is the most efficient to drive the reaction and the v(6)(e) and v(5)(e) modes enhance the DF and HF channels, respectively.  相似文献   

20.
Zhang  Yunju  Wang  Zhiguo  Huang  Baomei  Zhou  Yan  Sun  Yuxi 《Structural chemistry》2020,31(5):1897-1908
Structural Chemistry - CCSD(T)//B3LYP calculations of the potential energy surfaces (PESs) are associated with the rate constants and branch ratio of products using the RRKM...  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号