共查询到18条相似文献,搜索用时 328 毫秒
1.
2.
3.
激光空泡刚性半球面内运动 总被引:1,自引:0,他引:1
采用甚高速照相技术与建立激光空泡在刚性半球壁面内的运动模型相结合的方法,确定了激光空泡在刚性半球面壁内的运动特性与无量纲距离的关系,提出了最佳无量纲距离概念。结果表明:半球反射面的半径与激光空泡最大半径之比小于1.1时,激光空泡在第1次膨胀时就会产生严重的变形并弹出半球面,并产生空化泡和空蚀,它们均会严重影响激光声的传播。该比值在1.1~3.3时,激光空泡将在第3次收缩之前接触半球面,容易对壁面造成空蚀。在该比值大于3.3的情况下,激光空泡在第3次收缩之前不会接触半球面,对激光声的传播和反射特性影响较小。如果考虑把空泡第1次溃灭时产生的激光声的声学中心控制在击穿点时,需要把该比值控制在5以上。 相似文献
4.
5.
激光空泡在近自由液面运动特性的实验研究 总被引:4,自引:0,他引:4
采用激光技术聚焦击穿液体产生空泡,利用高速摄像系统开展激光空泡与自由液面的相互作用的实验研究。实验研究发现,空泡与自由液面之间的无量纲距离对水下空泡的脉动特性和自由液面的水冢现象存在影响。通过大量实验总结了无量纲距离与空泡半径、空泡脉动周期、自由液面水柱的最大高度和产生水冢时间的相互关系。实验表明无量纲距离越小,空泡脉动周期越短,自由面的水冢现象越明显。同时统计出了在不同无量纲距离范围内所出现的5种不同水冢现象的规律。研究内容为空泡与自由液面相互作用的理论提供了实验依据。 相似文献
6.
为了研究刚性圆锥边界锥角对激光空泡溃灭行为的影响,文章建立了虚拟平面边界模型, 同时采用阴影摄影术、光偏转法以及数值计算的手段对边界附近空泡溃灭过程进行了研究. 结果表明边界的锥角对空泡的形状、溃灭时间以及液体射流形成均有明显影响. 空泡形状偏离球形的程度和溃灭时间均随锥角的增大而增大,且增大锥角度可以促使射流的形成. 空泡溃灭时间的实验值同理论值具有较高的一致性,验证了虚拟平面边界假设及无量纲距离修正的有效性. 相似文献
7.
通过高速摄影系统对电火花气泡与不同沙粒底面间的相互作用进行了实验研究,并改变气泡与沙粒底面之间的距离.实验结果表明:气泡在与沙粒底面的相互作用中会产生两种明显不同的现象,即形成与近刚性壁面类似的气泡射流以及“蘑菇状”气泡,“蘑菇状”气泡撕裂形成两个气泡,随后产生两个反方向的沿轴线方向的射流.沙粒底面边界具有刚性与弹性两种特征.另外,随着气泡与沙粒底面之间的距离d的增大,气泡脉动周期先增大然后减小,存在气泡脉动周期峰值.对于不同的沙粒底面边界,出现气泡脉动周期峰值的距离d随着沙底粒径的增大而越小. 相似文献
8.
9.
通过自行研制的光纤传感器对不同黏度液体中材料靶后的力学作用进行研究,获得了液体黏度变化对等离子体烧蚀力、射流冲击力及空泡生存周期的影响. 实验结果表明:液体黏度相同时,靶材所受冲击力幅值随作用激光能量的增加单调上升;液体黏度增加时,靶材所受的冲击力减小,靶材的空化空蚀程度亦减小;受液体黏度增大的影响,空泡膨胀或收缩过程减缓,相应的生存周期也增大. 此外,对空泡溃灭周期公式进行修正, 结果表明修正后的理论估算值与实验值的一致性较好. 相似文献
10.
为了揭示刚性界面附近气泡空化参数与微射流的相互关系, 从两气泡控制方程出发, 利用镜像原理, 建立了考虑刚性壁面作用的空化泡动力学模型. 数值对比了刚性界面与自由界面下气泡的运动特性, 并分析了气泡初始半径、气泡到固壁面的距离、声压幅值和超声频率对气泡溃灭的影响. 在此基础上, 建立了气泡溃灭速度和微射流的相互关系. 结果表明: 刚性界面对气泡振动主要起到抑制作用; 气泡溃灭的剧烈程度随气泡初始半径和超声频率的增加而降低, 随着气泡到固壁面距离的增加而增加; 声压幅值存在最优值, 固壁面附近的气泡在该最优值下气泡溃灭最为剧烈; 通过研究气泡溃灭速度和微射流的关系发现, 调节气泡溃灭速度可以达到间接控制微射流的目的. 相似文献
11.
Xu Z Hall TL Fowlkes JB Cain CA 《The Journal of the Acoustical Society of America》2007,121(4):2421-2430
Short, high-intensity ultrasound pulses have the ability to achieve localized, clearly demarcated erosion in soft tissue at a tissue-fluid interface. The primary mechanism for ultrasound tissue erosion is believed to be acoustic cavitation. To monitor the cavitating bubble cloud generated at a tissue-fluid interface, an optical attenuation method was used to record the intensity loss of transmitted light through bubbles. Optical attenuation was only detected when a bubble cloud was seen using high speed imaging. The light attenuation signals correlated well with a temporally changing acoustic backscatter which is an excellent indicator for tissue erosion. This correlation provides additional evidence that the cavitating bubble cloud is essential for ultrasound tissue erosion. The bubble cloud collapse cycle and bubble dissolution time were studied using the optical attenuation signals. The collapse cycle of the bubble cloud generated by a high intensity ultrasound pulse of 4-14 micros was approximately 40-300 micros depending on the acoustic parameters. The dissolution time of the residual bubbles was tens of ms long. This study of bubble dynamics may provide further insight into previous ultrasound tissue erosion results. 相似文献
12.
13.
14.
在2 m×2 m×2 m的实验水箱中开展小当量PETN炸药水中爆炸气泡脉动实验时,利用弹性波从声阻抗高的物质传入声阻抗低的物质时的“减震缓冲”原理,采用在水箱壁贴低声阻抗材料的方法,有效降低了水箱壁反射冲击波对气泡脉动过程的影响,获得了清晰的气泡脉动过程图像、气泡水射流形成过程图像和气泡脉动压力曲线。将水箱实验结果与8 kg TNT当量爆炸水池实验结果对比,得到的最大相对误差仅为5.1%,验证了水箱实验方法的准确性,为炸药水中爆炸气泡脉动现象研究提供了一种简便有效的实验方法。 相似文献
15.
The collapse of laser-induced bubbles in water is investigated by high speed photography at framing rates as high as 20 million frames per second. The case of a spherical bubble in an unbounded liquid is compared with the Gilmore model. Bubbles collapsing in front of a solid wall show a rich dynamics depending on their normalized distance. Unprecedented details are given of the generic sequence of events leading to multiple shock waves and bubble shape metamorphosis upon collapse. 相似文献
16.
Matevž Dular Olivier Coutier Delgosha Martin Petkovšek 《Ultrasonics sonochemistry》2013,20(4):1113-1120
Previous investigations showed that a single cavitation bubble collapse can cause more than one erosion pit (Philipp & Lauterborn [1]). But our preliminary study showed just the opposite – that in some cases a single cavitation pit can result from more than one cavitation event. The present study shows deeper investigation of this phenomenon. An investigation of the erosion effects of ultrasonic cavitation on a thin aluminum foil was made. In the study we observed the formation of individual pits by means of high speed cameras (>1000 fps) and quantitatively evaluated the series of images by stereoscopy and the shape from shading method. This enabled the reconstruction of the time evolution of the pit shape. Results show how the foil is deformed several times before a hole is finally punctured. It was determined that larger single pits result from several impacts of shock waves on the same area, which means that they are merely special cases of pit clusters (pit clusters where pits overlap perfectly). Finally it was shown that a thin foil, which is subjected to cavitation, behaves as a membrane. It was concluded that the physics behind erosion depends significantly on the means of generating cavitation (acoustic, hydrodynamic, laser light) and the specimen characteristics (thin foil, massive specimen), which makes comparison of results of materials resistance to cavitation from different experimental set-ups questionable.Further development of the shape from shading method in the scope of cavitation erosion testing will enable better evaluation of cavitation erosion models. 相似文献
17.
The ability of cavitation bubbles to effectively focus energy is made responsible for cavitation erosion, traumatic brain injury, and even for catalyse chemical reactions. Yet, the mechanism through which material is eroded remains vague, and the extremely fast and localized dynamics that lead to material damage has not been resolved. Here, we reveal the decisive mechanism that leads to energy focusing during the non-spherical collapse of cavitation bubbles and eventually results to the erosion of hardened metals. We show that a single cavitation bubble at ambient pressure close to a metal surface causes erosion only if a non-axisymmetric energy self-focusing is at play. The bubble during its collapse emits shockwaves that under certain conditions converge to a single point where the remaining gas phase is driven to a shockwave-intensified collapse. We resolve the conditions under which this self-focusing enhances the collapse and damages the solid. High-speed imaging of bubble and shock wave dynamics at sub-picosecond exposure times is correlated to the shockwaves recorded with large bandwidth hydrophones. The material damage from several metallic materials is detected in situ and quantified ex-situ via scanning electron microscopy and confocal profilometry. With this knowledge, approaches to mitigate cavitation erosion or to even enhance the energy focusing are within reach. 相似文献
18.
A qualitative and numerical analysis of the differential equation, describing pulsation of a symmetrical cavity in the area of the contact of smooth surfaces with different curvatures, forming a slot is presented in this article. This particular model is a slot between a plane and a sphere. Qualitative reasons of high erosion activity of such a toroidal bubble are defined. The boundary values were found when solutions of the equation are either non-harmonic periodic and non-vanishing, or vanishing (i.e., the bubble bursts). The results of this article can be applied to the controlling tasks of ultrasonic cavitation processes. 相似文献