Microbial bioreductions of γ- and δ-ketoacids and their esters

A series of yeasts were used in the bioreductions of aliphatic and aromatic γ- and δ-ketoacids and esters to investigate the preparation of enantiomerically pure γ- and δ-lactones through the intermediacy of their corresponding γ- and δ-hydroxyacids and esters. Bioreduction of ethyl 4-oxononanoate 2a with Pichia etchellsii afforded the γ-nonanolide (+)-5a with 99% e.e., while Pichia minuta proved to be the best choice for the bioreduction of ethyl 2-oxocyclohexylacetate 2e, which afforded cis-(−)-5e and trans-(−)-5e with 98 and 99% e.e., respectively. Reduction of 3-(2-oxocyclohexyl)propionic acid 3e with Pichia glucozyma gave predominantly the corresponding δ-lactone trans-(−)-6e with 94% e.e., whose absolute configuration was determined by means of CD spectroscopy.     

Enantioselective reduction and deracemisation using the non-conventional yeast Pichia glucozyma in water/organic solvent biphasic systems: preparation of (S)-1,2-diaryl-2-hydroxyethanones (benzoins)

Water/organic solvent two-liquid-phase systems have been successfully applied in the synthesis of enantiomerically pure (S)-benzoin through two different methodologies catalysed by whole cells from the non-conventional yeast Pichia glucozyma: the stereoselective monoreduction of benzil and the deracemisation of benzoin. The presence of the organic solvent influences the redox systems implied in the reactions, avoiding the formation of the corresponding diols, increasing the enantioselectivity and allowing the easy isolation of the products in high yields and excellent enantiomeric excesses. The use of both strategies has been extended to the preparation of different chiral benzoin derivatives.     

Enantioselective monoreduction of different 1,2-diaryl-1,2-diketones catalysed by lyophilised whole cells from Pichia glucozyma

In this work we have studied the monoreduction of different 1,2-diaryl-ethanediones (benzils, 1) with lyophilised whole cells from Pichia glucozyma CBS 5766, using the diphenyl compound (benzil, 1a) as model substrate, and extended the enantioselective reduction to structurally different symmetric benzils for producing enantiomerically pure or enriched benzoins (α-hydroxyketones 2) in high yields and very short reaction times. In order to study the regio- and stereoselectivity of this biocatalyst, we examined the reduction of diaryldiketones formed from different aryl moieties, to obtain symmetric and asymmetric crossed-benzoins. This methodology is conducted under very mild reaction conditions (aqueous media with small amounts of DMSO for solubilising the substrates, T=28 °C), therefore constituting a green alternative compared to other reported procedures for obtaining homochiral benzoins.     

Asymmetric reductions of ethyl 2-(benzamidomethyl)-3-oxobutanoate by yeasts

The stereoselective reduction of ethyl 2-(benzamidomethyl)-3-oxobutanoate 1 using yeasts was investigated among a restricted number (12) of yeasts. Kluyveromyces marxianus var. lactis CL69 diastereoselectively produced (2R,3S)-ethyl 2-(benzamidomethyl)-3-hydroxybutanoate 2, whereas Pichia glucozyma CBS 5766 gave (2S,3S)-2 as the major stereoisomer. The biotransformations were independently optimized for minimizing by-product formation and maximizing the diastereoselectivity. Under optimized conditions, K. marxianus var. lactis CL 69 gave the (2R,3S)-ethyl 2-(benzamidomethyl)-3-hydroxybutanoate 2 with ee > 99% and de = 98%, while P. glucozyma CBS 5766 allowed for the production of (2S,3S)-2 with ee > 99% and de = 86%.     

Novel thiosemicarbazones derivatives bearing aromatic iodine moiety: Design,synthesis and anti-malarial activity

A series of thiosemicarbazones of aromatic iodide derivatives were designed and synthesized. The structures of all the newly synthesized compounds had been identified by elemental analysis, ¹H NMR and ¹³C NMR. Their biological activities were evaluated against Plasmodium falciparum. Among these compounds, at concentrations of 3, 9 and 27 mg/kg of mouse per day, 4e inhibited the growth of the malaria parasite in vivo test in mice with the respective percentages: 88.1%, 90.7% and 92.6%. The present work suggest that thiosemicarbazones of aromatic iodide may become a lead compound for anti-malaria medicine.     

Highly specific N-monomethylation of primary aromatic amines

A synthetic methodology for the specific conversion of primary aromatic amines into their N-monomethyl derivatives under very mild conditions is presented. Anilines are treated with 4-nitrobenzenesulfonyl (nosyl) chloride to generate the corresponding sulfonamides 2 in high yields. The subsequent N-methylation reaction of the sulfonamides 2 with a solution of diazomethane is rapid and quantitative. Removal of the nosyl protecting group is readily carried out using the reagent system mercaptoacetic acid/1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) affording the N-monomethylated aromatic amines 4. The procedure is convenient, efficient, and gives rise to the N-monomethyl-anilines exclusively.     

Aromatic polyketides from a caterpillar associated Alternaria sp.

Five new aromatic polyketides, alternaphenols A–E (1–5), and two known compounds (6–7) were isolated from a liquid culture of Alternaria sp. (strain no. NF2198), a caterpillar associated fungus. Their structures were determined by extensive spectroscopic analysis and single crystal X-ray crystallography. Compounds 1–7 were evaluated for their cytotoxic activities against a human skin melanoma A-375 cell line. Only compounds 4 and 5 showed weak cytotoxic activities.     

A New Isolate from Fusarium proliferatum (AUF-2) for Efficient Nitrilase Production

A fungal isolate from Fusarium proliferatum strain AUF-2 has been found to have a high nitrilase activity (≥1,000 U/l culture). The present work describes optimization of growth conditions and production medium to achieve maximum nitrilase production. The most effective carbon and nitrogen sources for nitrilase production were glucose and sodium nitrate, respectively. ε-Caprolactam was found to be the best inducer for maximum nitrilase production with 80 g/l wet cell biomass and 26 U/g nitrilase activity. An overall nitrilase activity of ≥2,000 U/l culture was obtained in this study, which is one of the best activities reported so far in any Fusarium strain. Chemo-profiling has shown that the strain is versatile in its ability to hydrolyze both aliphatic as well as aromatic nitriles. Efforts are being made to use the strain for biotransformation of pharmaceutical substrates.     

Chemo-enzymatic synthesis of ethyl (R)-2-hydroxy-4-phenylbutyrate

A new biocatalytic strategy to obtain the ethyl (R)-2-hydroxy-4-oxo-4-phenylbutyrate precursor of ethyl (R)-2-hydroxy-4-phenylbutyrate, an important intermediate in the synthesis of a variety of ACE inhibitors, has been set up. Starting from ethyl 2,4-dioxo-4-phenylbutyrate, a screen of microorganisms has been performed in order to find the best catalyst able to reduce the keto group in the α-position with high chemo- and enantioselectivity. The biotransformation catalyzed by Pichia pastoris CBS 704 gave the best results in terms of conversion and enantioselectivity. The addition of adsorbing resins in the fermentation medium is effective in controlling substrate and product concentration in the medium, thus improving both conversion and enantioselectivity of the biotransformation. Preliminary experiments in a continuous batch reactor with growing culture of P. pastoris will be also presented.     

Organolithiums by reductive lithiation: the catalytic aromatic method versus the use of preformed aromatic radical-anions. Naphthalene can behave as a catalyst or an inhibitor

Two common modes, using aromatic radical-anions for reductive lithiation, the replacement of a C-heteroatom bond with a C-Li bond, have been compared with regard to yield and the mildness of reaction conditions required. It was found that the use of preformed radical-anions generally resulted in higher yields and milder reaction conditions than the ‘catalytic’ method in which catalytic amounts of the aromatic compound are used and the radical-anion is generated and used in situ. The one apparent exception is N-phenylaziridine, but it is shown that in this case the aromatic compound, naphthalene, is actually an inhibitor rather than a catalyst. Rational mechanistic explanations are given.     

Depolymerization and hydrodeoxygenation of lignin to aromatic hydrocarbons with a Ru catalyst on a variety of Nb-based supports

Efficient conversion of lignin to aromatic hydrocarbons via depolymerization and subsequent hydrodeoxygenation is important. Previously, we found that NbO_x species played a key role in the activation and cleavage of C–O bonds in lignin and its model compounds. In this study, commercial niobic acid (HY-340), niobium phosphate (NbPO-CBMM) and lab-made layered niobium oxide (Nb₂O₅-Layer) were chosen as supports to study the effect of Brönsted and Lewis acids on the activation of C–O bonds in lignin conversion. A variety of Ru-loaded, Nb-based catalysts with different Ru particle sizes were prepared and applied to the conversion of p-cresol. The results show that all the Ru/Nb-based catalysts produce high mole yields of C₇–C₉ hydrocarbons (82.3–99.1%). What's more, Ru/Nb₂O₅-Layer affords the best mole yield of C₇–C₉ hydrocarbons and selectivity for C₇–C₉ aromatic hydrocarbons, of up to 99.1% and 88.0%, respectively. Moreover, it was found that Lewis acid sites play important roles in the depolymerization of enzymatic lignin into phenolic monomers and the cleavage of the C–O bond of phenols. Additionally, the electronic state and particle size of Ru are significant factors which influence the selectivity for aromatic hydrocarbons. A partial positive charge on the metallic Ru surface and a smaller Ru particle size are beneficial in improving the selectivity for aromatic hydrocarbons.     

Liquid-liquid-liquid phase microextraction of aromatic amines in water using crown ethers by high-performance liquid chromatography with monolithic column

Liquid-liquid-liquid phase microextraction (LLLME) coupled with high-performance liquid chromatography (HPLC) for the analysis of some aromatic amines is described. These compounds were extracted from 4.0 mL aqueous sample that adjusted to pH 13 with, NaOH-NaCl buffer solution (donor phase, P₁) into an organic phase (P₂) 150 μl benzyl alcohol and ethyl acetate (2:1) and then back extracted into a microdrop of aqueous acceptor phase (P₃), adjusted at pH 2, with Na₂HPO₄-H₃PO₄ buffer solution. The extraction time, T₁ (from P₁ to P₂) was 20 min and T₂ (from P₂ to P₃) was 1 min. Different crown ethers as complexing agents for amines were added to the acceptor phase to improve the extraction time. Factors such as organic solvents, extraction times, and addition of crown ethers to acceptor phase and stirring rate were optimised. The method was applied for determination of aromatic amines in wastewater samples. Enrichment factors ranged from 184.5 to 389.7. The linearity range was from 3 to 1000 ng/ml and the detection limits varied from 0.8 to 1.80 ng/ml. Relative standard deviations (%, n = 5) were found (at S/N 3) in the range of 1.9 to 10.1. All experiments were carried out at room temperature, 22 ± 0.5 °C.     

Novel chiral C2-symmetric multidentate aminophosphine ligands for use in catalytic asymmetric reduction of ketones

A series of novel chiral C₂-symmetric multidentate aminophosphine ligands have been successfully synthesized by Schiff-base condensation of bis（o-formylphenyl）phenylphosphane and easily available monoprotected（1R,2R）-diaminocyclohexane.The catalytic properties of these ligands were investigated in Ir-catalyzed asymmetric transfer hydrogenation of various aromatic ketones,giving the corresponding optical active alcohols with up to 98%conversion and good ee under mild reaction conditions.     

Conjugate addition of aromatic amines to ethenetricarboxylates

The conjugate addition of amines is considered to be a useful reaction in synthetic organic chemistry. The reaction of reactive electrophilic olefins, ethenetricarboxylates, and aromatic amines with and without catalytic Lewis acids such as ZnCl₂ and ZnBr₂ at room temperature gave amine adducts in high yields. The products were converted to α-amino acid, dl-aspartic acid derivatives. Using Lewis acids such as Sc(OTf)₃ and Zn(OTf)₂ at higher temperature (40-80 °C), the reaction of ethenetricarboxylates and N-methylaniline gave an aromatic substitution product. A catalytic enantioselective conjugate addition using a chiral Lewis acid was also investigated. For example, the reaction of 1,1-diethyl 2-tert-butyl ethenetricarboxylate with N-methylaniline in the presence of chiral bisoxazoline-Cu(II) complex in THF at −20 °C for 17 h gave an amine adduct in 91% yield and 78% ee. On the other hand, the reaction with aniline and primary aniline derivatives gave adducts with almost no ee%.     

A one-pot three-component approach to synthesis of novel dihydroxyoxoindeno[1,2-b]pyrrole derivatives

A new class of 2-arylamino-dihydroxyindenopyrroles were prepared by the one-pot multicomponent reaction of ninhydrin, N-methyl-1-(methylthio)-2-nitroethenamine and aromatic amines in EtOH at room temperature. The advantages of this procedure are short reaction times, good to high yields, easy separation of products and good functional group tolerance.     

Origin of fluorescence in the cure reaction of aromatic dicyanates

The origin of fluorescence in the cure reaction of aromatic dicyanates was thoroughly investigated using a fluorescence spectrophotometer and a UV-Vis spectrophotometer. Some highly pure cyanates or dicyanates, such as 4-cumylphenyl cyanate (CPCy), 2,2-bispheny cyanate (BIPCy) and tricumylphenoxy-s-triazine (TCT), were successfully synthesized for the investigation of the fluorescence origin. Fluorescence characterizations of the purchased bisphenol A dicyanate (BADCy) and the synthesized 2,2-bispheny cyanate (BIPCy) during the curing process were utilized to explain the self-quenching effect. The purchased 2,4,6-triphenoxy-1,3,5-triazine (TPOT), 2,4,6-triphenyl-1,3,5-triazine (TPT) and the synthesized TCT, all of which possess a single s-triazine ring, were used as model compounds to pinpoint the exact origin of fluorescence. The results demonstrate that the origin of fluorescence in the curing process of aromatic dicyanates does neither arise from the s-triazine ring itself nor the intermolecular π-stacking, but from the substitution groups. The s-triazine ring in association with the substitution groups determined the characteristics of the fluorescence.     

Rh(I)-catalyzed solvent-free ortho-alkylation of aromatic imines under microwave irradiation

The synthesis of ortho-alkylated ketones through a chelation-assisted Rh (I) catalyzed ortho-alkylation reaction of aromatic imines under microwave activated solvent-free conditions in monomode reactors was performed. These conditions have been also applied to hydroacylation and ortho-alkylation reactions with aldimines.     

Optimization of Bioprocess Extraction of Poria cocos Polysaccharide (PCP) with Aspergillus niger β-Glucanase and the Evaluation of PCP Antioxidant Property

Poria cocos mushroom is widely used as a food and an herb in East Asian and other countries due to its high nutritional value. Research has demonstrated that Poria cocos polysaccharides (PCP) are the major bioactives and possess antioxidation, anti-inflammation, immunoregulation, and other health promoting properties. However, the efficient preparation of PCP has been a challenge, particularly in large scale for industry. Herein, we investigated the biotransformation of PCP from Poria cocos, catalyzed by β-glucanase from Aspergillus niger and focused on optimizing the most four influencing parameters: Temperature, time, pH, and enzyme dosage in this study. After numerous optimizations with the assistance of response surface optimization methodology, we have established that the optimal conditions for the biotransformation PCP preparation were as following: Enzymolysis temperature 60 °C, time 120 min, pH 5.0 and enzyme dose 20 mL. Under these conditions, the extraction yield of PCP reached as high as 12.8%. In addition, the antioxidant activities of PCP were evaluated by reducing power assay and 1,1-diphenyl-2-picryl-hydrazyl, superoxide anion, and hydroxyl radicals scavenging assays. Resulting data showed that PCP presented outstanding antioxidant capacity. Thus, these findings indicate that PCP could be produced as a natural antioxidant for further development.     

Determination of traces of aromatic compounds in multicomponent mixtures by HRCGC

The possibilities and difficulties of trace analysis of highly complex organic mixtures has been demonstrated by the analysis of traces of numerous aromatic substances in an n-alkane matrix with a boiling point range of 151–270°C. Single column high resolution capillary gas chromatography (under optimized conditions) was performed after an off-line LC preseparation step which had been evaluated using a model mixture. Gas chromatographic quantitation of the 191 aromatic compounds identified was performed with an internal standard; following splitless injection and separation on a polydimethyl-siloxane column under temperature-programmed conditions the compounds were detected by flame ionization. The response factors of aromatic hydrocarbons at trace levels were verified and the precision and reproducibility both of the GC determination and the overall analysis, including preseparation, were studied. Percentage by weight of individual aromatic compounds (mainly alkylbenzenes, indanes, naphthalenes, and acenaphthenes) was in the range 10^?3 to 10^?6.     

Electrochemical and electrochromic properties of novel aromatic poly(amine-amide)s derived from N,N′-bis(4-carboxyphenyl)-N,N′-diphenyl-1,4-phenylenediamine

A series of novel triphenylamine-containing aromatic poly(amine-amide)s were prepared from the dicarboxylic acid, N,N′-bis(4-carboxyphenyl)-N,N′-diphenyl-1,4-phenylenediamine, and various diamines by direct phosphorylation polycondensation. All the poly(amine-amide)s were amorphous, soluble in a variety of organic solvents, and could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass-transition temperatures (195-280 °C). These polymers exhibited strong UV-Vis absorption bands at 330-346 nm and their photoluminescence showed maximum bands around 516-535 nm in NMP solution. The hole-transporting and electrochromic properties are examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the poly(amine-amide)s prepared by casting polymer solution onto an indium-tin oxide (ITO)-coated glass substrate exhibited two reversible oxidative redox couples at potential 0.73-0.78 V and 1.12-1.18 V, respectively vs Ag/AgCl in acetonitrile solution. All the poly(amine-amide)s exhibited excellent reversibility of electrochromic characteristics by continuous ten cyclic scans between 0.0 and 1.40 V, with a color change from original pale yellowish neutral form to the green and then to blue oxidized forms.